Labview driver for 2636A (sweep mode)

Hello,
We have recently bought 2636A for our lab (ASU Arizona). We are trying to make a standard MOSFET sweep i.e. using two channels: one channel for constant Vsd and measure Isd; and the second channel for sweeping gate voltage Vg. So finally we want to plot Isd vs Vg.
We are trying to make labview vi for this. We have downloaded the vi drivers from Keithley website (used for 26xx intruments), but it seems very complicated and we couldnt figure out how to do it.
Can anyone please tell us or post a vi for this concept ? We would really appreciate it.
Thank You

have you taken a look at this thread?
http://forums.ni.com/t5/LabVIEW/How-do-i-sweep-two-voltage-at-the-same-time-by-using-for-loop/td-p/2...

Similar Messages

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

    I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

    NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
    You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
    p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

  • RS232 Labview driver for SR830 lockin Amplifier

    Hi,
    I want to install Labview driver for Stanford Research SR830 lockin amplifier for RS232 port. NI has drivers for GPIB but I could not find any for RS 232 comm port.
    Please let me know how can I find driver for RS232 port.
    Regards,
    Nitin

    Dear Jason S,
    I also want to communicate with sr 830 with the RS232 interface. You said I had to rewrite the whole thing. What does that really mean? Rewrite the driver? If so, what language will it be?
    JasonS' wrote:
    Hello Nitshu-
    As you mentioned, this driver only supports GPIB, and not RS-232.  This driver was originally created in 1994, so it was not created using VISA.  This means that to convert this driver you would need to essentially rewrite the entire thing.  There are not currently any plans to update this driver to support RS-232, but you could easily communicate with it by adding a GPIB Interface to your system.
    Let us know if you have any specific questions we can help answer.
    Jason S.
    Applications Engineer
    National Instruments
    Thank you for answering my question

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • Labview driver for HP 8560 EC Spectrum Analyzer

    I'd appreciate it very much if somebody help to find
    Labview driver for HP 8560 EC Spectrum Analyzer using GPIB.

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugg
    est contacting one of the Alliance members at:
    http://www.ni.com/alliance
    Good Luck.
    Kim L.
    Applications Engineer
    National Instruments

  • Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

    I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

    Hi,
    Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
    uggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone > Development Library > Instrument Connectivity
    http:/
    /search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • How to build a Labview driver for a USB device?

    I have purchased a USB Hall probe (a device that measures magnetic fields) and now I need to build a LabVIEW driver for it (the company that sells this device did not build drivers for it, to keep the price down I suppose). The USB device does come with an operating software, but what I need is to control the device using LabVIEW. I have some experience with LabVIEW, but none with building drivers. I don´t really know where to start, so any advice would be helpful.

    To do USB in LabVIEW you'll want to get the NI-VISA driver. After you've got VISA, check out a few examples: 
    USB Instrument Control Tutorial
    Six Things You Need to Know about USB Instrument Control
    There are also examples built in to LabVIEW (under Help>>Find Examples to open the NI Example Finder, then under Hardware Input and Output>>VISA)
    Tim W.
    Applications Engineering
    National Instruments
    http://www.ni.com/support 

  • Does anybody already developed or knows where can I find a LabVIEW driver for a CETA 800 equipment?

    Ronaldo Schwarz
    Selco Sistemas Eletronicos Ltda

    Ronaldo,
    I just did a search of the web (and of NI resources), and I could not find any helpful pages offering information on LabVIEW drivers for this CETA 800 equipment.
    The only suggestion I have is that perhaps the manufacturer of the device may have a driver, or may perhaps know of someone who does provide one.
    I hope you are able to find a LabVIEW driver for this instrument. If you end up having to write one of your own, you can visit www.ni.com/idnet to find several resources on writing your own instrument drivers.
    Have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • LabVIEW driver for a ControlTechniques motor controller

    Anyone know of LabVIEW driver for a ControlTechniques
    Unidrive motor controller?
    Or any info/pointers to programming them via LabVIEW?
    Any help much appreciated
    Paul
    Dr Paul Rocca - Managing Director
    Brill Engineering Ltd, 3 Longwood Court,
    Love Lane, Cirencester, Gloucestershire
    GL7 1YG. www.brill-eng.co.uk
    Phone: 01285 883888 Fax: 01285 883876
    NI Alliance Member Since 1992
    Please note that calls may be recorded using our leading edge digital
    recording product AudioPC.
    Any opinions expressed in the email are those of the individual and not
    necessarily of the Company. This email and any files transmitted with it are
    confidential a
    nd solely for the use of the intended recipient. It may
    contain material protected by lawyer-client privilege. If you are not the
    intended recipient or the person responsible for delivering to the intended
    recipient, be advised that you have received this email in error and that
    any use is strictly prohibited. If you have received this email in error ple
    ase notify the Security Manager by telephone on +44 (0)1285 883821 or by
    email to [email protected]

    LV can interface to 232, 485, Devicenet... depending on what the controller has.
    You could find a LV/CVI driver for this (232/GPIB/ethernet only) instrument at http://www.ni.com/devzone/idnet/default.htm . If it's not listed there, it leaves you with one of a couple options. First, I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program. With all of this work already done for you in the driver, instrument drivers can significantly reduce development time.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone > Development Library > Instrument Connectivity
    http://search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps.

  • Has anybody got a labview driver for Lecroy 9410 ?

    Has anybody got a labview driver for Lecroy 9410 ?

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugges
    t contacting one of the Alliance members at:
    http://www.ni.com/alliance
    If you have any further queries, please let me know

  • Does sombody have a labview driver for the Scanlab rtc2 scanner controller

    From the German firm Scanlab we have a RTC2 isa card with a dll. Has somebody already written a labview driver for this card ?
    greetings from the Netherlands

    Hello Martin,
    First, don t worry it shouldn t be very complicated  I work at a reasearch center with physicist and an hospital with physicians, we probably work on something very similar, like eye surgery assisted by laser
    1- First thing first, does your scanner works with the examples provided with Scanlabs? ex.: "Hpgl.exe" with an "*.PLT" file?
    2- If so, have a look at my load correction subVI, I always do a reset before I start working with the scanner control, only once at the beginning. If the function returs :"0" zero, it s working if not, come back to me.
    regards
    Lukasz
    Attachments:
    LOAD CORR FILE (SubVI).vi ‏9 KB

  • I am looking for LabVIEW driver for MAVOLOG10 L/N/S from GMC-Instruments.

    For testing power supplies we use the MAVOLOG 10 Power Quality Monitor for 3 phase Systems. So we use LabVIEW as test enviroment we need information where to find a driver.

    Hello,
    I just did a search of the web for "mavolog labview" and found absolutely nothing. I think just about the only place you might be able to find a LabVIEW driver for this device would be from the manufacturer. Hopefully they can help you out. If they have nothing, there are some helpful resources at www.ni.com/idnet for developing your own instrument driver.
    Good luck with your application, and have a good day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • North atlantic resolver(M​odel No:75DS2-1​B1B1FC0) labview driver for NI real time controller

    Hi all,
    I have North atlantic resolver(Model No:75DS2-1B1B1FC0) and LVDT/RVDT Simulation(Model No:75DS2-52521FC0)  cards. I am using this card in RT. I downloaded instrument driver from http://sine.ni.com/apps/utf8/niid_web_display.mode​l_page?p_model_id=2386. How can I use this driver in RT code for simulate the resolver and lvdt? 
    Regards,
    Rathnam.M(CLAD),
    Nokia Siemens Network

    I know it has been a while but NAI has had the LabView RT driver for a while now. The standard Window drivers now contains all the drivers which includes the VISA driver and the Windows drivers for 7 and XP.Using the stanard Windows driver will require the standard DLL.
    If you are using the standard LabView running on Windows 7 or XP with NI VISA software layer you will need the VISA driver. The VISA driver's low level register operation follows NI method of talking to the board in a PC or in a PXI chassis. Installing the proper driver is the key to getting the board to work. If you allow Windows OS to pick the driver to use you are in trouble and it is going to a very  long day of frustration. Go into the Windows device manager and recognizing an entery that represents the NAI board should not be difficult to find. The entry should have yellow question mark indicating that something has been installed but not really working. If the Windows device manager sees the board correctly and MAX does not see the board at all then you have the wrong driver. Using the device manager and cherry picking the right driver from the list of driver provided in the NAI Windows driver offering is the way to get it working.
    Once the driver is loaded the VISA has the API library in import form and there is a VI that opens and reads the serial with other information.
    Using LabView RT requires additional files that are provided in the NAI driver which is now available.
    The API is in a VI form so you may need to locate the VI you need then store in a folder that is more convenient to find. 
    I have an outline that properly step through the method to progam the D/S models that you have. Please feel feel to request the program outline. JOEA
    Einstein proved by taking time in thinking about a problem he proved there is no such thing as gravitational pull. Therefore, given enough time and thought a problem can be solved. If the problem is not solved then there has not been enough thought.

  • [BUG] Agilent ESA PSA Series LabVIEW driver for Models E4401B and E4402B

    Agilent ESA PSA Series LabVIEW driver are not working with Models E4401B and E4402B.
    Driver Version 2.1.1
    LabVIEW: 2009
    Web Link: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=309EBE8FF8BC0E76E0440003BA7CCD...
    Problem: ID Query in "Agilent ESA PSA Series.lvlib:Initialize.vi". ID Answer from Instrument is not match with strings in Match Array. Somebody left whitespace at the strings end. ("Hewlett-Packard,\sE4401B\s" and "Hewlett-Packard,\sE4402B\s").
    Everything else is working well.

    Hi JCC,
    Thanks for bringing this to our attention, a Corrective Action Request has been created: CAR - Corrective Action Request - #247239 and a member of R&D will take a look into this to get the issue resolved.
    Kind Regards,
    Applications Engineer

Maybe you are looking for

  • How do you solve a DVD drive recognition conflict between Windows 7 and iTunes?

    After doing an iTunes reinstall to resolve another issue, I discovered that my PC running Windows 7 would not recognize my DVD burner, drive E: when attempting to do a backup to a DVD disk. Window 7 Device Manager indicated that there was a registry

  • One machine but I tunes says I authorized 4 of my 5 allowed please help

    I have one desktop and one Ipod, I just reinstalled windows now Itunes must think it is a new machine. Can I get my account back to 1 machine and 1 Ipod? I want to be able to use a laptop also but I think this will put me over the top once I plug in

  • OSPF PE-CE

    Hi, Can someone please clarify for me the role played by OSPF in the backbone when ew are using OSPF between PE and CE. How is this different to when we're using a differenr PE-CE routing protocol? A route with the "down bit" set, is it dropped by MP

  • How do you set the setting in iPhoto to ask before deleting a picture?

    How do you set the setting in iPhoto to ask before deleting a picture?

  • Download OS X Mountain Lion

    When you download OS X Mountain Lion, does it delete everything on the mac? I have many pictures I want to be in the mac, but I don't know what to do if it is not there when i have downloaded Mountain Lion.