LabVIEW drivers to perform vault actions on Solidworks EPDM files
I would like to find out if anyone has any code written to work with the Solidworks PDMWorks Enterprise Type Library? The very basic thing I would like to do is find out if a file in the vault is checked out or not, but it would be nice to know if other options are available also (e.g. Checkout, View Status, Get Latest, etc.). If there is any code already written, it would be greatly appreciated so I don't have to reinvent the wheel.
Thanks, Jeff
I am not using the Softmotion Module, nor do I need it. I just need to find out if a file is 'Checked Out' in the EPDM Vault. If the file is checked out, I only want to prompt the user to go check it out first before continuing. If Softmotion has this capability, then perhaps I could recreate just that VI, figuring out all of the activeX tags to use is a chore. If there is nothing already out there, I'll get it figured out.
Similar Messages
-
I need to check three comparative conditions and for each status I need to perform some action. can anybody please suggest
Requirment:
Need to check if a numeric value is within a number range by using comparative function. Depending on status i need to ggive a constant input to numeric function.Easiest is suing an array of range boundaries, e.g. as follows:
(Found here)
Now it is fully scalable and independent of the number of ranges. The solution in the earlier post would get complicated quickly whenever the number of ranges or boundary locations changes.
LabVIEW Champion . Do more with less code and in less time . -
Labview drivers for Zeiss A1 Microscope motorized stage
Hi,
Anyone tried to control the motorized stage of Zeiss Axioobserver A1 using Labview before? We have one in our lab. I am trying to get it work recently. I found NI has labview drivers for Zeiss Z1 and M1 model. The Z1 is the fully motorized version of A1 we have. So I think they should have the same motorized stage. But the Labview stage control drivers for the stage on Zeiss Z1 does not work for our stage. Has anyone done this before? Thank you!Hi Cole,
The Labview version I have is 2010. The VISA version I had before is 4.1 so I updated it to 5.1.2. But I still met the same problem. The microscope is connected to the computer via a USB/CAN converter. I put the screen shot of this USB in attachment. When I try to run it from the VISA interactive control, it shows the error:Could not perform operation because of I/O error. (in the attachment)
I can detect this USB from the drvier wizard (see attacment3 ). But when I click next and install the inf files, it shows an error window (see attachment 4). This problem does not happen before I updated the VISA from 4.1 to 5.1.2. I have the inf file generated from the VISA 4.1 version (see attachment 5 and 6). But I can not generate the file from the 5.1.2 version. Will that be a big problem?
Do you have any ideas about this?
Thank you very much!
Best
Wei
Attachments:
USB.png 78 KB
USB2.png 72 KB
USB3.png 48 KB -
Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support -
Good evening, technet community
I hope you are doing well.
When configuring my SharePoint workflow, I encounter the problem below:
Problem Description:
Let's say my domain is: test.com, my group user is: test\group , my user is: test\user1
Except an admin account with full control at both "Web Application" and "Site Collection", all others account all have problem when creating a list item. After creating a list item, the workflow status is "cancelled" immediately
with the following message:
RequestorId: 262a35e4-99f4-40f0-929b-5d04b415f147. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["10"],"SPRequestGuid":["262a35e4-99f4-40f0-929b-5d04b415f147"],"request-id":["262a35e4-99f4-40f0-929b-5d04b415f147"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Thu, 06 Nov 2014 12:14:28 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform
this action or access this resource."}}} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor,
BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
- The workflow is still fail even I assign "full control" to my users group "test\group" – at Site Collection level.
Surprisingly, I have successfully found a solution for this error message. However, I still have some points that I do not clearly understand. Let's start with my solution first.
Solution:
*** i. Assign permission policy at Web Application level – Central Admin site ***
1. Central Administration ==> Application management
==> Manage Web application
2. Go to "permission policy", then create a new permission level. This permission level contains all "edit item" permission.
3. Select "user policy", then I assign it directly to my user account: test\user1.
*** ii. Assign "edit item" permission at Site Collection level ***
1. Site Setting ==> Site permission
2. Assign "Edit" permission to my test\group.
(Actually I removed all permissions of my user group at Site Collection level. It seem my group has inherited permission from Web Application level, is that correct? )
*** iii. Create a new list item and workflow runs ……. ***
==> My question is:
1. Why I cannot assign permission to my users group - "test\group" -
at "Web Application" level? Instead I have to assign permission policy for each users, one by one?
2. Could you please let me know how to collect full detail error message of workflow status?
Thank you very much! Have a nice weekend.Thank you for your very detail response.
Point 1: Yes my 2 service: user profile & profile sync service are running. I performed "full synchronization" as well. Actually i've tried 3 another action plans before coming up with the solution i posted:
*** Actions completed ***
1. Activate the feature: workflow can use app permissions.
Site actions > Site Settings > Site features >activate the feature below:
Workflows can use app permissions
2.
Refresh trusted security token services metadata feed
Get-SPTimerJob
"RefreshMetadataFeed"
| Start-SPTimerJob
- then restart the machine.
3. Start full user profile synchronization.
Point 2:
- Yes my user had Edit permission at workflow task list + list affected by workflow.
I have just remove all permissions of my user at "Site Collection" level. However, when i show my user permissions at my workflow task list and my users still have "Edit" Permission ( assigned at Web Application level. These permissions
still exist even after my workflow task list stop inheriting permission).
==> the problems probably belongs to "permission" at "Site Collection level". It seems "permission level at my Site Collection does not work". All users accounts are also suffer from the same issues except farm admin account
( which has full control at Web Application level).
I would appreciate if your guys can guide me how to make "permission" at my "Site Collection level" work again?
Thank you very much. -
EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANELSTOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download -
am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?
Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support -
ITunes installation error: does not have program associated with it for performing this action
Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy -
You don't have Add and Customize Pages permissions required to perform this action - but i do!
Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine. -
How do I perform an action on return key press in an inputListOfValues?
I know about the autoSubmit attribute, but I do not want to perform an action on a tab character or when exiting focus. Instead, I want to perform the same action as pressing a button when the user presses the return key in the input field. For example, an inputListOfValues for a search input, and a search button. When the user presses the return key, I would like the search to be performed. I'm sure that this can be done, I'm just not sure how. Thanks for any info.
I did something similar, on an input box, not on an inputListOfValues, but I assume it should work the same way more or less. I got it from
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/af_event.htm#DAFBJGAH
I used it for my login page so the user doesn't have to click on Login, just press enter after entering the password. I just had to map the corresponding method binding.
BTW, the link above doesn't tell you have to add the javascript to the page. What I did was add an af:resource element inside of af:document.
Hope this helps. -
Print button should not perform its action in report previewer
Hi all,
Report version 6i
I am invoking a report from a form , the form has one status field ,the value can be NEW,APPROVED,CANCEL
i just want take the print of the report if the status is approved , in all other cases the print button should be perform its action.
that is , when user tries to print the report , its function should not happen.
Please Guide.
Thanks
:8}
Edited by: elegant on Jul 13, 2010 12:49 PMADD_PARAMETER(param_list,'DISABLEPRINT','YES');
ADD_PARAMETER(param_list,'DISABLEMAIL','YES');
if you want to enable it give
ADD_PARAMETER(param_list,'ENABLEPRINT','YES');
ADD_PARAMETER(param_list,'ENABLEMAIL','YES'); -
Hi,
We have a server where powershell gives an error. The shortcut or the context menu for start button (replaced cmd in context menu) gives an error saying "this file does not have a program associated with it for performing this action".
In some events, like going to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools\Windows PowerShell.lnk and opening it results in bupkus. Nothing happens.
Browsing to C:\Windows\system32\WindowsPowerShell\v1.0\ and running powershell.exe directly or opening cmd.exe and typing powershell <enter> runs powershell as it should.
What gives?
This posting is provided "AS IS" with no warranties or guarantees and confers no rightsHi,
I'd probably try asking here:
https://social.technet.microsoft.com/Forums/en-us/home?forum=winserver8gen&filter=alltypes&sort=lastpostdesc
This is more of an OS issue than a PowerShell issue, IMHO.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
This file does not have a program associated with it for performing this action
hi
whenever i install adobe reader in my system it change my all program to adobe reader nd can't open any application.. i mean internet explorer change in adobe reader, C++, microsoft office every application...why its happened....
and even i can't open pdf files on my system it shows a erroe the file does not have a program associated with it to perform this action.. please create a association in control panelThis's the message showing!!
-
Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!
You are posting in the "icloud on my mac" forum, but your profile mentions Windows. If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream. If using windows, try posting in the iCloud on a PC forum. You'll get better help there.
https://discussions.apple.com/community/icloud/icloud_on_my_pc -
whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?
I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also
Maybe you are looking for
-
How to mass change posting date of parked logistics invoice verifications
I was wondering if someone can help... We are looking if there is a standard SAP program available to mass change the posting date (to a new date in a new period) for a number of parked logistics invoice verification documents. Example: Invoices are
-
Planned order numbers- reached maximum number
Hai, We reached the maximum limit on Planned Order numbers (table PLAF). anyone had this situation before and if so how did you resolve it? Thanks in advance, Sonali
-
Adobe Document Services in ESS/MSS
Hello All, Is it possible to get a list of iviews and services which utilise Adobe document services in ESS/MSS ERP2005 on EP7.0? Any help is greatly appreciated and rewarded. Thanks all, Rajit
-
Error 101: After Effects Cs6 Trial (Not enough available disk space)
This is the error that I get when I attempt to download After Effects trial. There is over 500 Gb of free space on my computer. Photoshop and Dreamweaver trials downloaded fine, and nomatter howmany times I try to redownload After Effects it still wi
-
I just got my new iPad and I can't find the hotspot option in settings ? Plz guid me on how to turn my hotspot on in that case if I can't even see the option !!