LabView / DSC / FieldPoint with Symantec Endpoint Encryption Device Control

I am developing a LabView DSC based control program to communicate with multiple FieldPoint modules (cFP2200/cFP1808) for a client. Their IT department has implemented Symantec Endpoint Encryption Device Control ( http://www.symantec.com/endpoint-encryption-device-control ) and I was wondering if anyone has had experience with this software?
From what I have read and had explained to me, it is much more than an antivirus program. It operates at a very low level within Windows and restricts reading/writing to external devices, USB sticks, network shares, etc. It can also monitor / restrict network traffic and WiFi access.
Thanks,
Steve

Hi MillerMech,
I believe it will cause some errors to be thrown due to its restrictive nature. Symantec has a discussion forum which will most likely be more helpful:
http://www.symantec.com/business/support/index?page=home
Sunaina K.
Product Manager
Embedded Systems

Similar Messages

  • Symantec Endpoint Encryption 11 Installation Error

    Hey guys. I am trying to deploy the Symantec Endpoint Encryption 11 Manager onto a server.I run into the a problem when I have to specify the Windows domain account to use for database access.I enter the service account which has full admin rights to the SQL INSTANCE and I get the following error:The domain user credentials did not pass verification. Re-enter the user name, password, and or domain and try again.Weird thing is that when I enter my username and password it continues. It only seems to proceed with my username and password. I was following the HOW TOHEREin which they also used a service account. The username and password are correct. This is the same account that is used to run the services. Does it require a domain admin username and password?

    To quote Lewis Carrol, from Alice’s Adventures in Wonderland: ‘Would you tell me, please, which way I ought to go from here?’ ‘That depends a good deal on where you want to get to,’ said the Cat. ‘I don’t much care where ’ said Alice. ‘Then it doesn’t matter which way you go,’ said the […]…Read MoreThe post Aligning Cyber Strategy to the Business appeared first on The State of Security.
    Read More

  • Weird one with Symantec Endpoint 12.1

    Hey Guys,
    I'm just wondering if anyone also burdened with Symantec Endpoint Protection is having the problem we now seem to be facing.
    Whenever we download the Zenworks agent from our ZCM Server (linux) to a PC, symantec Quarantines it. This has only started happening this week (there was a definition update yesterday).
    We usually download the the full 32bit version (i've had trouble with the network install before).
    The Symantec risk log gives a really obscure reason for blocking the "PreAgentPkg_AgentComplete.exe" file, it says the risk is "WS.Reputation.1" :
    WS.Reputation.1 | Symantec
    Our Symantec build is 12.1.601.4699 I would post this on the symantec forums, but I think there is more chance of finding one of you guys running Symantec, than someone on the Symantec forums using Zenworks.
    Our Antivirus Monkey is off this week, but I was just curious if anyone else was having the same problem, it seems to be happening on all our PC's.
    Thanks
    Dave

    I have run into the same thing with our ZCM deployment. Have you found a solution I submitted files to Symantec with no answer yet. I am showing all our PC's that received the Client via the ZCM Server infected and quarantined. The only difference is I show it being a Suspicious.Cloud2 infection. Any info would be greatly appreciated.
    Originally Posted by Cptdave
    Hey Guys,
    I'm just wondering if anyone also burdened with Symantec Endpoint Protection is having the problem we now seem to be facing.
    Whenever we download the Zenworks agent from our ZCM Server (linux) to a PC, symantec Quarantines it. This has only started happening this week (there was a definition update yesterday).
    We usually download the the full 32bit version (i've had trouble with the network install before).
    The Symantec risk log gives a really obscure reason for blocking the "PreAgentPkg_AgentComplete.exe" file, it says the risk is "WS.Reputation.1" :
    WS.Reputation.1 | Symantec
    Our Symantec build is 12.1.601.4699 I would post this on the symantec forums, but I think there is more chance of finding one of you guys running Symantec, than someone on the Symantec forums using Zenworks.
    Our Antivirus Monkey is off this week, but I was just curious if anyone else was having the same problem, it seems to be happening on all our PC's.
    Thanks
    Dave

  • I can't print with symantec endpoint protection

    I can't print with symantec endpoint protection.
    I have to disable the firewall, or reboot my windows 7 computer for the print job to print.  Any ideas what is blocking the printing process and how do I allow so I can print using my HP P2033dn that is connected via ethernet to my time capsule.  Thanks

    In the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
    [ excessive quoting removed by admin ]

  • Problem with Symantec Endpoint protection and iCloud

    iCloud does not function on my PC with Symantec Endpoint Protection. I think it is the stopping of Auto-run that is the problem, but I don't know how to solve this

    Hi Xung,
    Can you elobrate as what is that you are trying to achive and its blocking
    IS it TMG not getting updated
    Client is unable to get live update from internet
    SEPM manager unable to get updates ?
    can you do a logging and share the screenshot of the traffic getting blocked.
    If TMG is unable to get updates then allow the belwo
    From : Localhost
    To : SEPM / GUP servers
    Port : 2967 - Outbound and 8014 Outbound
    Allow for All Users

  • Issue with Symantec EndPoint Protection 11.0

    I am experiencing the exact issue in this article on Symantec's KB:
    http://tinyurl.com/5x6fay
    Can someone at Lenovo please acknowledge this issue (confirm or deny) and let me know how to resolve this without disabling the security features I paid for on this new T400?
    Thank you.
    Michael Reinders

    Ask in a Symantec forum how to configure your software correctly. Your Symantec software blocks LAN access and should be configured to allow it. The E2000 has nothing to do with that.

  • Did Flash Player 11 patch cause problem with Symantec Endpoint?

    I downloaded Flash Player 11. Now each time I attempt to get new antivirus definitions from Symantec I get a warning message that the process failed.

    Unless your Symantec updater uses Flash content and uses it to enable download links, it's highly unlikely that the Flash Player update had any effect on it at all. Your best bet in determining this would be to contact Symantec suport and ask if their updater uses Flash content to enable download links.
    I don't use ANYTHING from Symantec because I used to test it for another software company and I know what it does to a system. It was the first thing I removed from a new laptop in June.

  • Symantec Endpoint Encryption Web Server Configuration

    -We have 20 computer but still i cant configure how to connect window to xp? -.-...... i would prefer for window 7 all so i can create easily ... cuz they want this 1 computer share to 1 computer for printer like that........ suggest? change all window 7.... 
    -How to find license key in win xp and 7 ?
    -Next step i want my job easily for backup files of all computer.........but the thing is they want to private there files in sharing..... i want all of them pass their files in one computer..... i need tips ..... thank you for replying ..... "i dont want to go all computer and plug in the hard drive so hassle -.-"
    -can you gimme link for sound device installer because some of computer on their company have no sound....thank you for replying

    Hello my fellow Spiceworks Avengers,I am seeking your help in figuring out my move to the virtual world (better late than never) for one of my clients.I currently have a Lenovo Thinkserver TS140, which is a small business server and Windows Server 2012 R2 running directly on the bare metal. This was done before I knew much about virtualization, and now I look back and I wish I can smack myself across the head for not going virtual then...The server is running Active Directory/DNS and is our only Domain Controller, hosting our QuickBooks data file, and is acting as a File Server. Please don't judge me too harshly as I will be immediately changing this configuration once I go completely virtual (E.g. adding multiple VM's for each role).The TS140 has an LSI MegaRAID 9266-4i http://www.newegg.com/Product/Product.aspx?Item=N82E16816118173...

  • LabVIEW programmer wanted with imaging & sub micron motion control experience

    We have a project where we need to align a microscopic image of a prober tip to a mask of known XY coordinates.  The image will be acquired with a video microscope with a high resolution digital camera, and the prober will be mounted onto an automated XY theta stage.  The mask will have to be scaled to match different magnifications/fields of view, and the stage will automatically align the prober to the mask. Project is located in Eugene, OR. Please contact John, or Gary at 800 706 2284 for further details.

    Hi, I'm having a problem with switching of relays using ADAM module 4608. I have 4 relays with me. The vendor supplied commands to open and close relays. But while using serial communication protocol, I can only operate one relay at a time. The problem is there are four different  commands to open but only one command to close it all. I couldn't operate all the four relays simultaneously. Program I developed is attached with this message.The commands to open are, #010001,#010002,#010004,#010008 and the close command is #010000.please, can you help me find a solution. I'm really stuck here.
    Regards,
    arjun
    Attachments:
    RELAY.JPG ‏75 KB

  • Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.

    Hello Everyone,
    Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.For Symantec Endpoint Protection 12.1, a maintenance patch has been released on July 29, 2015. Customers will need to be current on maintenance to receive the maintenance patch update. For more information, visit our SEP 12.1 Windows 10 Knowledge Base.You can upgrade to Windows 10 with Symantec Endpoint Protection 12.1.6 MP1 installed. You must uninstall earlier versions of Symantec Endpoint Protection. The operating system upgrade stops if it detects an earlier version of Symantec Endpoint Protection.The following operating system upgrade paths are supported with 12.1.6 MP1 installed:Windows 8.1 to Windows 10Windows 8 to Windows 10Windows 7 to Windows 10For more details check the following article:http://www.symantec.com/docs/INFO2746SEP...
    This topic first appeared in the Spiceworks Community

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • LabView DSC, RSLinx, SLC505 and Data transfer (Best way for large blocks of data?)

    I am currently programming in Labview 6.1 with the Datalogging and
    Supervisory Control module to transfer 720 floating point numbers to a
    SLC505 Allen Bradley PLC (with ethernet) using RSLinx as an OPC server. I
    have found that using the Datasocket Write takes about 30 - 40 seconds, and
    making the tags and writing to them takes about the same amount of time. Is
    it possible to transfer this data faster?
    Thanks,
    Michael Thomson (Surcher)

    Cyril,
    I was just experimenting with different ways to transfer the data from the
    computer to the PLC. In the past I have built large tag databases with
    specific tag names. This made the code rather cumbersome when you wanted to
    write to a large group of tags with descriptive names. I was just using
    datasocket write as a way to transfer the data to the plc using code to
    build the url and without having the DSC engine running. I have found that
    importing the tags right from the tag configuration editor with the names
    being simply the PLC addresses and then accessing them with the tag write is
    considerably faster (under 5 seconds). I can then build the names in an
    embedded for/next loop and change them to a tag name before I write to each
    one. The appli
    cation is a user interface that allows the machine operator
    to pick what kind of arch to put on cabinet door part. With the selections
    chosen I calculate the servo moves and download the data to the PLC.
    Thanks for the link!
    Michael Thomson
    "Cyril" wrote in message
    news:[email protected]..
    > Michael,
    >
    > I am a little bit confused about the configuration here and the
    > programming here: why are you using Datasocket Write if you are using
    > tags? Are the 720 floating numbers written to 720 different I/O
    > Points(registers). If so this shouldn't be that slow especially with
    > DSC
    > I would strongly encourage you contact the support at National
    > Instruments for LabVIEW DSC, either by phone or e-mail and give a
    > detailed description of the issue:
    > www.ni.com/ask, and communication method phone NI or e-mail NI.

  • Symantec Endpoint Protection 12.1 and Peopletools 8.53

    Hello,
    We're currently enabling virus scan for PT 8.53 with Symantec Endpoint Protection (SEP) v12. However, we are unable to configure it correctly. Our set up looks like this:
    * PS webserver is insatalled on server 1, this is where we configure the virusscan.xml file
    * SEP 12 is installed on a separate server, server 2. client and SEP manager is installed on this server.
    * OS is Windows 2008 R2 64-bit for both servers.
    May I know if  anyone here have successfully used SEP for scanning attachments?
    Unfortunately, as per oracle, only symantec scan engine was verified to work with peoplesoft, other versions are still not tested to work.
    another question is, what should be the value for the virusscan.xml parameters below?
        <Provider>
         <name>SymantecManagementClient</name>
        <class>psft.pt8.virusscan.provider.GenericVirusScanProviderImpl</class>
        <icapversion>ICAP/1.0</icapversion>
        <service-name>/SmcService</service-name>
        <policycommand>?action=SCAN</policycommand>
        <address>server2</address>
        <port>8014</port>
        <disable>false</disable>
         </Provider>
    we've mixed and matched the available service names from server 2, but we are still getting the error below:
    Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
    INFO: Input OPTIONS Header = OPTIONS icap://server2:8014/SmcService ICAP/1.0
    Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
    INFO: OPTIONS recieve header= HTTP/1.1 200 OK
    Date: Tue, 10 Sep 2013 15:14:19 GMT
    Server: Apache
    Allow: GET,HEAD,POST,OPTIONS
    Content-Length: 0
    Connection: close
    Content-Type: text/plain
    ICAP header = ICAP/1.0 200
    Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient scanStream
    SEVERE: Unable to connect to the Scan server SymantecManagementClient; Reason = CONNECTERROR
    Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
    INFO:  Scanning completed using provider = SymantecManagementClient Provider classname = psft.pt8.virusscan.provider.GenericVirusScanProviderImpl
    Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
    INFO: Finish Scanning Request.
    port 8014 is the client communications port for SEP and its the only port that gives us a response (INFO: OPTIONS recieve header= HTTP/1.1 200 OK..etc), when we try other ports we get a "SEVERE: Unable to connect to SymantecManagementClient" message on this line.
    Hoping for your responses, thank you in adance for your help.

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • Symantec Endpoint Protection on Mavericks Reviews??

    It seems like everyone has a review or has reviewed Symantec Norton Internet Security and Norton Antivirus yet not too much has been tested or written on Symantec Endpoint Protection.
    Unfortunately we are moving in a direction where we will be installing Symantec Endpoint Protection on all our macs and I am trying to find reviews, whether personal or professional, about SEP and macs.
    I know Symantec products in general have been trashed on for mac for a while now but it seems I can't find a good AV test out there that includes it for Mac (as most only contain the two symantec products I mentioned above)
    Anyone have any personal experience, or know of any testing done with the Symantec Endpoint Protection on macs within the past year?

    Hello Everyone,
    I am Chetan Savade from Symantec Technical Support Team.
    You can directly install an unmanaged or managed Symantec Endpoint Protection client on a Mac computer if you cannot use or do not want to use Remote Push. The steps are similar whether the client is unmanaged or managed. The only way to install a managed client is with a package you create with Symantec Endpoint Protection Manager. You can convert an unmanaged client to a managed client at any time by importing client-server communication settings into the Mac client.
    Check the following articles:
    Compatibility between Symantec Endpoint Protection for Mac and versions of Mac OS X
    http://www.symantec.com/docs/TECH131045 
    Symantec Endpoint Protection for Macintosh Frequently Asked Questions (SEP for Mac FAQ)
    http://www.symantec.com/docs/TECH134203
    Send me DM here https://www-secure.symantec.com/connect/user/chetan-savade if you need any assistance with SEP for MAC.
    Best Regards,
    Chetan

  • How can I connect LabVIEW 7.0 with an AB PLC (micrologix 1500)

    Hi, I have an AB PLC (micrologix 1500), but I don´t know how connect it to LabVIEW, I mean, I want to aquire data from PLC (analogous data)and I want to write on it too,(using LabVIEW 7.0), Can you send to me an example about this application or explain to me how can I do this application?
    thanks you.
    (sorry, my english so bad)

    "I want to aquire data from PLC ... and I want to write on it too using LabVIEW 7.0"
    Do you have plain LabVIEW or LabVIEW + DSC (i.e. Datalogging and Supervisory Control module in the Prof. Control Development Suite)?
    ... and do you have Allen Bradley's RSLinx?Message Edited by Donald on 04-04-2005 03:20 PM
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • Device Control/Capture Problem

    My computer set up is an HP xw9300 workstation running Windows XP. I shoot 720/60p HDV, sometimes with tape and sometimes with tape and hard drive. The cameras are JVC and the deck is the JVC BR-HD50. Although I had some difficulty getting Premiere from CS2 to recognize the deck for recording, it eventually did. No problems at all with Premiere in CS3. I recently upgraded to CS4...and haven't been able to capture anything since. In the dviice control, both under preferences and in the capture program, the settings that worked in CS2 and CS3 are JVC/Standard. Using the same settings with Premiere in CS4, device control will control the deck functions (forward/play/back), but it will not record and it will not stop the deck. I've tried all the JVC settings...none work. I've also tried to capture without device control...no soap. Anybody have any ideas as to what is going on here? Your help and suggestions are appreciated.

    For SD try http://www.scenalyzer.com/main.html
    For HD try HDVSplit... google for a link

Maybe you are looking for