LabVIEW Engineer Direct Hire 75k
LabVIEW Engineer, Full Time, FargoND
Purpose
Lead the development of automated test, data acquisition, and control systems using LabVIEW. Involves direct customer contact some travel.
Requirements
- BS in Science or Engineering.
- 5+ years of experience developing automated test, measurement, data acquisition, and control systems
- 5+ years LabVIEW and/or TestStand development experience
- Experience with a variety of programmable instruments. Experience with National Instruments hardware a plus.
- Experience writing system and software requirements specifications.
- Effective learning, utilizing, and applying new technology.
Helpful Skills
- Excellent verbal and written communication skills
- Strong hands-on hardware troubleshooting and software debugging skills
- Custom hardware design skills a plus, including fixtures, analog and digital circuits, cable assemblies, enclosures, and turn-key systems
- Experience creating documentation, UML, system diagrams, schematic diagrams, P&ID
- Project leadership, project management, engineering group leadership experience a plus
Responsibilities
- Design, develop, implement, and document test, measurement, data acquisition, and control systems using LabVIEW and TestStand
- Evaluate requirements specifications; Develop technical proposals
- Supervise and provide technical mentoring to junior engineers
- Devise, document, and oversee execution of test strategies
If you are interested in learning more please contact Bill Ties 1-800-357-8403 or [email protected]
Incorrect board. Please move to: LabVIEW Job Openings
Similar Messages
-
DIRECT HIRE LabView Programmer needed!!!!!!!
I have a DIRECT HIRE opening in Michigan for LabView Programmer. Must have a background in the automotive industry. Please email me your resume or call me for more information. [email protected] or 248-528-1200 x216
Thanks!!!
-Vicki PowellThis probably belongs into the LabVIEW job opening forum.
http://forums.ni.com/ni/board?board.id=JobPost
LabVIEW Champion . Do more with less code and in less time . -
Labview engineer looking for job in china
I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]Hi Alec,
Your organisation sponsor visa for non-local residents? -
Labview engineer needed at Pune
Dear Sir,
We are looking for Labview engineer with electrical knowledge (preferable) wishing to work as freelancer for a project contact urgently at [email protected] 9822027137
Message Edited by aasss on 02-16-2010 04:45 AMPlease let me know the years of experience the candidate should have.
Sunil.
My Blog Host your website for free! Home PC as webserver -
LabVIEW Consultant for hire in Denver/Bou​lder
Denver area consulting firm for all of your Data Acquisition, Control, Real Time National Instruments needs. Competitive pricing, certified LabVIEW developers waiting for your most challenging projects.
www.SureWorksLLc.comHello Sir/ Madam,
I am interested in doing work at Sankalp Semiconductor as a LabVIEW engineer
Attached my Resume..!!
Attachments:
abhinav.doc 42 KB -
Experienced LabVIEW Engineer looks for part time projects
Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available. -
Job Description
A software development engineer will be involved in the following daily activities: planning and documenting software strategies, LabVIEW programming, technical support, and system’s level troubleshooting. The majority of all development will involve the continued development of our Sound and Vibration Product Strategies.
Requirements
BSEE, BSME or BS or an advanced degree in Physics, Chemistry, Engineering or another engineering/scientific field
Experience with advanced-levels of LabVIEW programming, CLD, or CLA certification a plus
Fluent in English Language in writing and verbal
Demonstrated understanding of vehicle powertrain systems
Demonstrated ability to work independently
Candidates must be either a U.S. citizen or already legally working in the U.S.
Send resume to [email protected]
Attachments:
Software Development Engineer - Job Description.doc 23 KB -
Senior Engineer - Tech Support Grand Rapids, Michigan Direct Hire position.
Please e-mail me if you are interested in the position below. I will enter your information into the job bank as an employee referal. This helps get you noticed above others.
[email protected]
Job:
Group/Division
Fluid Power - Aerospace - Electrical Sensing & Controls Division
Experience Level
5-7 years
Travel
Up to 10 percent
Internal Job Description
Located in Grand Rapids, MI Opening for a Senior Engineer - Tech Support.
Key responsibilities include:
-Programming from scratch and modification of existing LabView programs
-Analyze, troubleshoot, and repair mechanical and electrical test systems.
-Analyze test equipment failures, identify root cause problems and design/implement solutions.
-Project management of new equipment requests for quotes and purchases.
-Lead technicians in troubleshooting and repair of equipment.
-Hands-on troubleshooting and repair of equipment.
-Exceed internal customer expectations for equipment uptime and reliable solutions.
-Develop short-term workaround solutions as needed to maximize test equipment uptime.
-Develop equipment standards and metrics.
Facility HR Contact: Jill Kurth
Job Qualifications
-BSEE or BSME with strong electrical and programming skills required.
-5 or more years applicable experience.
-Expertise in National Instruments solutions is required.
-Demonstrated programming and application of LabView software using various I/O solutions is required. LabView Certification is a plus.
-Extensive knowledge of managing automated test equipment projects.
-Aerospace experience preferred.
-Electromechanical actuator experience preferred.
-Expertise in PLC programming.
-Working knowledge of Mitsubishi PLCs is a plus.
-Expertise in custom digital and analog circuit design is a plus.
-Excellent written and oral communication skills.
Relocation benefit provided?
No
US Locations
Grand Rapids, MI
State
MichiganHi!
I am interested for this Job and attaching my Job application.
Thanks!
Khursheed Akhtar
Attachments:
Resume6.doc 48 KB -
DIRECT HIRE - PLYMOUTH, MICHIGAN - LABVIEW DEVELOPER
RedViking, is a leader in powertrain and propulsion testing systems for automotive, aerospace, and defense customers. We have doubled in size in 2 years and continue to grow. We are looking for someone with your LabVIEW expertise. Check out our posting. Please send your resume to me at: [email protected] http://www.redvikingeng.com/careers/
Incorrect board. Please move to: LabVIEW Job Openings
-
I am an engineer-turned-LabVIEW programmer with 14 years of LabVIEW and industry experience in the San Francisco Bay Area
I have worked and programmed the following types of systems:
Semiconductors
Bioinformatics/DNA Synthesis and Sequencing
Digital Imaging
Fermentation
Solar Energy
Chemical Processing Systems
General Automation and Custom Analysis
Real-time and Embedded Systems
I can provide CORP-to-CORP hourly contracting, or it may be possible to work out licensing agreements, depending on your needs and the product.
Please contact me at [email protected] and see http://www.zojosoft.com for more information.
Jed DavidowDear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc 25 KB -
Dear all,
I have a VI which runs perfectly and I can control, a Keithley 2612A for transistor measurements.
The VI run well when I excecute it from the computer which has the platform Labview 2009 (XP OS)
The equipment (ie Keithley 2612A) is linked to another computer which don't have labview 2009.
I installed Run-time-engine 2009 (OS XP 32 bits) on this computer.
Then I create an excecutable of my VI with the "build application" option.
The excecutable VI starts normally on the computer but when I want to run it, I am getting an error message from the Keithley 2612A (which was not the case when I ran the VI directly from the computer haing Labview 2009 installed on it). The error message is 222 (ie parameter too long)
I thought that I did something wrong and I create an excecutable from an original VI from Keithley (ie without any change). I am getting the same error message.
When I create an excecutable with run time engine 2009 included (as it is possible to do it wiht LB 2009) , I am geeting the same error message.
So I need no to check step after step when the message happens but
Does anyone knows anything about such an issue ?
Thank you
Solved!
Go to Solution.Dear all,
Just for those who might encounter a similar issue.
I found the solution after tackling all possibilities.
The source of the problem was (for unknown reason) that the country setting of the computer was wrong
and decimal numbers were written with a , instead of a point.
Since I reset correctly the country setting, the stand alone files are running normally.
Best regards
Youki -
Yogesh Redemptor - LabVIEW Engineer
Dear Sir/Madam,
I am a Mechatronics Engineer. And I am a NI certified LabVIEW Developer (CLD).
I have 3.5 years of experience in the Test & Measurement field.
I have 2 years of experience in 'LabVIEW Offshore Development Centers'
Currently I am working in K.M. Integrators Pvt Ltd as System Engineer – Technical Lead in Industrial Automation Field (NI LabVIEW).
Herewith I am sending my detailed resume for your kind Perusals.
Please let me know if you have any requirment.
Thank you,
Yogesh Redemptor
Regards,
Yogesh Redemptor
Attachments:
Yogesh Redemptor Resume.doc 54 KBPlease let me know the years of experience the candidate should have.
Sunil.
My Blog Host your website for free! Home PC as webserver -
Boulder/Longmont, CO
My company, Sureworks (www.sureworksllc.com) is looking to hire a local LabVIEW programmer as a contractor (1099), if you are a good fit, I will hire you permanently.
The contract job is very well-defined, we would pay you hourly. It is approximately a few days worth of work, but it is really a trial period to much bigger things. If you are tired of the large company politics, tired of endless meetings, if you are ready to learn a huge set of real-world skills, this might be it.
If you are MacGyver and have somehow gotten to learn LabVIEW in addition to all of the rest of your skills, great. Being a small business, I need someone that can do hardware, software, etc. Approximately 2-5 years experience in LabVIEW would be fine, NI Certs would be good, electrical engineering background would be good. Software engineering would be just as good, especially if you have experience in firmware, ARM, or mobile devices.
Sureworks has been serving Denver/Boulder for 7 years, with clients ranging from USBR, NREL, several large industrial conglomerates, and sole inventors looking to get their idea off the ground. Reply to [email protected] Please include a resume.
Good luck!
Darren Odom
Principal, Sureworks LLc.
[Edit]- Misspelled MacGyverI would not recommend hiring a MacGiver who learned LabVIEW "on the side"... Not if you want a solution that will be free of headaches and casual explosions.. Not to mention bugs and unreadable code that will need to be re-written by a someone truely knowledgeable..
There are non-MacGivers out there who do have the skills you are looking for. Many can be found in the forum. Availability is another subject.. -
Houston based company is looking to hire a LabVIEW Software Developer with 3-5 years experience. A qualified candidate will have a can do attitude that is willing to get their hands dirty if need be.
Experience:
Must have 3-5 years experience working with the LabVIEW platform.
Must have a good understanding of Real Time applications.
Must be detail oriented and enjoy doing hands on work.
Desired Skill:
LabVIEW Certificate is a plus.
Responsibilities:
Building software
Debugging software
Education:
Must have an Electrical Engineering DegreeDear Sir/Mam, I’m particularly interested in this position, which relates strongly to my more than 4 years of experience in designing various applications for testing and automation. I am Certified LabVIEW Associate Developer & prepared for CLD also. Currently I am leading a team for the project of Base Computer Station which downloads/uploads data from remote energy meters for various electricity boards with some Protocols. DLMS Protocol is also one of tham. I worked on NI’s Hardware and Software (LabVIEW), and I believe I meet all the essential criteria of the position. My work at my current organization has been rewarding and productive. However, I wish to expand my career further, into the application designing and development role. The position also has a definite correlation with my practical knowledge and experience. You’ll see from my CV that I have been deeply involved in designing and development of various applications based on Programming techniques, hardware and network designing. I feel that I am well qualified to make an effective and useful contribution to design good application which will be market acceptable. I’m enthusiastic about the chance to participate in a meaningful role with an industry leader in the field. Thank you for your consideration of my application. Please contact me for any further information.
Mohit Monga
+91-98151-55333
[email protected]
Mohit Monga
Attachments:
Mohit_Monga_Resume(3).doc 148 KB -
ANY LABVIEW ENGINEER OPENING AT BANGALORE,,,???
Hi
I'm ramesh babu, Completed my Masters in Electronics & Instrumentation from Madurai Kamaraj University.
I have expertise knowledge in following domain :-
LabVIEW-2010
NI DAQ- 6251, 6014
NI Elvis
Sensors and Interfacing
Hardware interfacing such as parallel & serial port
PLC - siemens S7200
OPC server - siemens pc access
if you have any openings please call me @ - +91-9739269920Ramesh, this is the thread where companys with jobs post them, so most of those looking at this thread are looking for jobs, not looking for applicants. There is a thread for apllicants looking to be hired, which is where this posting would be more appropriate.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion
Maybe you are looking for
-
No SOUND on Youtube and other streaming services.
Hi, I updated my 2011 MacBook Pro to OSX Yosemite. My only problem is: when I play the video on YouTube or other straming services I have to wait 5-10 second to hear the sound from the video. Sometimes i have to reload the page. Very annoying. Is th
-
IPod nano (1st generation) no longer registers in iTunes
iPod nano (1st generation...5 years old) no longer registers in iTunes. Music is no longer a viewable option when connected to iTunes through Mac Pro. Is it just not supported anymore?
-
Getting Workflow Notification Mailer SMTP Information Programatically
hi all, I have get SMTP information that is been configured in oracle applications r12. I need to know , how we can get it programmatically. Is there any database view? e.g smpt.gmail.com We have provide email intimation facility from ADF page. Thank
-
Record with 2 USB input devices for 2 different tracks?
Hi guys. I just bought a Snowball ICE. Sounds great. I went to use that on one track and my Apogee Jam on a different (guitar) track at the same time and every time I switch the input in the "info" area to one input for one track it changes them o
-
Docus about 3rd-party defined integration scenario: SAP Web AS u2013 SAP NW
Hi all, we have an SAP integration solution which we want to get certified. We are interested in the third-party defined integration scenario: u201ESAP Web AS u2013 SAP Netweaver Application Serveru201C as similar products have this certification. Wh