LabVIEW Engineer for Caterpilla​r India, Chennai

Please find the JD for Requirement..
Mandatory Requirement
1. 3-5 years Experience in Embedded Test Automation
2. Programming experience in LabVIEW, Python, Perl and C++
3. Knowledge on NI DAQ, OOPS & Vision
4. Knowledge on CAN,TCIP/IP, UDP, Serial(Rs232/RS422), Modbus
5. Test Plan design and Testing
6. Certified CLAD/CLD from NI
Nice to Have
1. Exposure to Automated Test equipment system
2. Exposure to Agile or CMMI work process
3. Knowledge on Locomotive/Automotive domain.
Please drop your CV to [email protected]

Hi Murali,
Please provide your offcial mail ID.
Regards
Vijay

Similar Messages

  • Required LabVIEW Developer for Gurgaon, Haryana, India

    We are in urgent need of LabVIEW developer, who must have atleast 2 years of experience in below given areas:
    1- LabVIEW Programming
    2- Hands on various communication interfaces like GPIB, UART, I2C, SPI etc.
    3- Instrument controlling.
    4- Should able to do proper documentation.
    5- Able to understanding Hardware PCB boards schematics.
    Please reply on this post with updated resume.
    CLA 2014
    CCVID 2014

    Muks,
    Though it may not be relevant here,I was wondering how come you know his e-mail address ? 

  • Labview engineer looking for job in china

    I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
    more detail please contact [email protected]

    Hi Alec,
    Your organisation sponsor visa for non-local residents?

  • Experienced LabVIEW Engineer looks for part time projects

    Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
    Looks for smaller part time projects (that can be performed at distance).

    Hi,
    I have 6 years of experiences in labview application.I would like to develop the code through the internet.
    Kindly let me know if the openings still available. 

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Labview player for linux?

    I have a Labview VI running on my Windows platform. I developed it using the Windows version of Labview 7.1. I used the Web Publishing tool to make the display available online. I have verified that I can see the display running in real time using IE on a Windows machine.
    Other machines in our LAN are running Linux, and cannot view the site in real time. For example, Mozilla asks for a plugin, but I can not find Labview Player for Linux anywhere. Can anyone help me get the Linux machines to see the real time site that is being hosted from a Windows machine?
    Thanks

    I don't think that there is a plug-in for a linux system to be able to view the published LabVIEW front panel.
    Wait! Try looking at this link:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=28545&requireLogin=False
    BobMessage Edited by Bob Y. on 06-13-2005 04:53 PM
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • RS232 Labview driver for SR830 lockin Amplifier

    Hi,
    I want to install Labview driver for Stanford Research SR830 lockin amplifier for RS232 port. NI has drivers for GPIB but I could not find any for RS 232 comm port.
    Please let me know how can I find driver for RS232 port.
    Regards,
    Nitin

    Dear Jason S,
    I also want to communicate with sr 830 with the RS232 interface. You said I had to rewrite the whole thing. What does that really mean? Rewrite the driver? If so, what language will it be?
    JasonS' wrote:
    Hello Nitshu-
    As you mentioned, this driver only supports GPIB, and not RS-232.  This driver was originally created in 1994, so it was not created using VISA.  This means that to convert this driver you would need to essentially rewrite the entire thing.  There are not currently any plans to update this driver to support RS-232, but you could easily communicate with it by adding a GPIB Interface to your system.
    Let us know if you have any specific questions we can help answer.
    Jason S.
    Applications Engineer
    National Instruments
    Thank you for answering my question

  • Labview driver for HP 8560 EC Spectrum Analyzer

    I'd appreciate it very much if somebody help to find
    Labview driver for HP 8560 EC Spectrum Analyzer using GPIB.

    Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
    http://zone.ni.com/idnet/other.htm
    We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://zone.ni.com/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugg
    est contacting one of the Alliance members at:
    http://www.ni.com/alliance
    Good Luck.
    Kim L.
    Applications Engineer
    National Instruments

  • Where can I find example LabVIEW VIs for the NI-USRP?

    There are several sources of example LabVIEW VIs for the NI USRP:
    We have established a NI Community "NI USRP Example LabVIEW VIs" where you can find example VIs from us (NI) and the community.
    The NI-USRP driver installs a variety of example VIs to the to the following folder on your PC: 
    <LabVIEW Installation path>\examples\instr\niUSRP 
    where you should replace <LabVIEW Installation path> with the root folder of your local LabVIEW installation. For instance, my Windows 7 32-bit PC here has LabVIEW 2011 installed and the examples can be found here: C:\Program Files\National Instruments\LabVIEW 2011\examples\instr\niUSRP
    I've installed the NI-USRP driver, but I can't seem to find the new examples in the LabVIEW Example Finder. Where are the example LabVIEW VIs installed by the NI-USRP driver?
    Although the NI-USRP driver does indeed install examples, the current NI-USRP 1.1 release does not update the LabVIEW Example Finder with entries for these examples. To find the examples, you can navigate the Windows Start Menu to the following location: 
    Start Menu\Programs\National Instruments\NI-USRP\Examples
    This Start Menu entry includes several Shortcuts that point to folders that are the home to example VIs.
    Sam Shearman

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

    I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

    Hi,
    Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
    uggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone > Development Library > Instrument Connectivity
    http:/
    /search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Labview engineer needed at Pune

    Dear Sir,
    We are looking for Labview engineer with electrical knowledge (preferable) wishing to work as freelancer for a project  contact urgently at [email protected]  9822027137
    Message Edited by aasss on 02-16-2010 04:45 AM

    Please let me know the years of experience the candidate should have.
    Sunil.
    My Blog  Host your website for free!  Home PC as webserver

  • Does anybody already developed or knows where can I find a LabVIEW driver for a CETA 800 equipment?

    Ronaldo Schwarz
    Selco Sistemas Eletronicos Ltda

    Ronaldo,
    I just did a search of the web (and of NI resources), and I could not find any helpful pages offering information on LabVIEW drivers for this CETA 800 equipment.
    The only suggestion I have is that perhaps the manufacturer of the device may have a driver, or may perhaps know of someone who does provide one.
    I hope you are able to find a LabVIEW driver for this instrument. If you end up having to write one of your own, you can visit www.ni.com/idnet to find several resources on writing your own instrument drivers.
    Have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • LabView codes for RTlinux

    Dear fellow LabVIEW users,
    I have found the LabVIEW codes for RTAI real time linux. But I cannot find any for RTlinux. I am wondering whether they can be used for RTlinux as well.
    Your reply is highly appreciated.
    Regards,
    "LabVIEW user"

    Hi Balagyi2001,
    Which codes do you refer to? We do have   LabVIEW for Linux that
    may or may not be compatible with certain kernels that have been made
    to run more deterministically.
    Richard
    Field Sales Engineer, New Jersey
    National Instruments

  • Labview Driver for DS9097U

    Can anyone help me in finding Labview drivers for DS9097U.I have already downloaded Labview Examples from Dallas.is that sufficient?

    Hi,
    I would recommend that the website you are looking at the moment would be the one to look out for examples and drivers dealing with the DS9097U.
    Best Regards
    Atul Wahi
    Applications Engineer
    www.ni.com

  • LabVIEW Engineer with Master Degree (M.E.) 2 Yrs Exp.

    Hello Friends,
    I am having 2 yrs experience in LabVIEW. Good knowledge working in LabVIEW coding Architectures. Desperately looking for a change. Chennai and Bangalore is preferrable. Contact me at [email protected]

    Hello I wanted to bump this thread up.
    I fell time has come time to once again embark on a job search quest for me.
    What has changed since the opening thread?:
    My CLD has expired, but I intend to recertify using the CLD-R and very quickly once again to CLA. ( plan is to do it in march ).
    During my last 2 years I've worked predominatnly in LabVIEW on very high speed DAQ with insane data-rates.
    Learned how to do proper multi threading in LabVIEW and work with ginormous data -sets in the hundreds od GB,
    Learned how to do proper 64-bit labview apps, and use memory efficiently.
    Got experience working on Oil and Gas stuff. Gained Team Lead Experience.
    What am I looking for:
    Software Architect, Team Lead or Software Manager positions.
    I'm also trying to get canadian residence, which should take me approx 10 moths to sort out, but if a job offer came sooner this could boost me.
    So Canadian offers are of my particuar interest.
    US jobs, unfortunately I do not have a work permint in US, which excludes me from 90% of the jobs on this forum, if any employer has the ability to sponsor please contact tme.
    I'm an EU citizen and I do browse the EU offers all the time, but if my profile is interesting to you please don't hesitate and contact me and I'll send you my resume.
    Regards,
    WibJ

Maybe you are looking for

  • Fatal:relocation error: While running JDK1.4 on Sun Sparc Generic_106541-08

    Hi, I installed the new jdk1.4 on my Solaris-7 machine. Initially I installed 32-bit jdk1.4 and then installed 64-bit jdk1.4 as indicated on your (sun's) installation page. I used executable binary version of installation for installing the software.

  • How do I create a list of files to be faxed together in one call?

    I would like to use the fax of my Pixma MX700 to send a number of files in a single call.  Can I create a list of the files and send them as one?

  • Remove the "Safety" tab from IE 11 tools with group policy

    Is there any way to remove the "Safety" tab or it's contents from the tools button in the upper right hand corner of IE 11 with Group Policy 2008 r2. I am using a GPMC on a windows 8.1 computer running IE 11. All of the computers we manage are Window

  • To include a guestbook

    Hi everyone, I would like to know, how to include guestbook in Adobe Muse. My customers want to put some comments on a  GuestBook... Widget? Html Code? Thanks in Advance.

  • "Part of the project was not played" error

    I just got a brand new iMac--double the number or processors and twice the RAM as the old one--and I keep getting this error in Garageband: Part of the project was not played This project has too many real instrument tracks to be played in real-time.