Labview engineer needed at Pune

Dear Sir,
We are looking for Labview engineer with electrical knowledge (preferable) wishing to work as freelancer for a project contact urgently at [email protected] 9822027137
Message Edited by aasss on 02-16-2010 04:45 AM

Please let me know the years of experience the candidate should have.
Sunil.
My Blog Host your website for free! Home PC as webserver

Similar Messages

LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

LabVIEW programmer needed for full time position, Orange County CA

Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg ‏186 KB

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

Flex Builder Engineer needed

Flex Builder Engineer need for profitable startup in the SF bay. *No overseas relocations*
Job Description:
This would be a great opportunity for experienced IDE developer, such as Flex, who want to move to cutting-edge web and mobile technology in the javascript open source framework space with a extremely well funded and proftable startup. The Web is in the middle of its biggest leap forward in a generation. HTML5 and its associated technologies are transforming the browser into a first class application platform. Local structured storage, rich media and deep device access are just a few of the newly available capabilities. Our mission is to create the tools that empower developers to create amazing cross-browser app experiences that execute with precision and performance
You would be applying your Flex SDK knowledge to build out components of a framework tool kit used by over a 1 million and growing. No Javascript knowledge is needed but a big plus if you have it.
Responsibilities:
• Apply state of the art Flex and Flash ActionScript tools and techniques to design and develop framework tools and solutions to meet product requirements for next generation web browser technology.
• Create cutting edge Rich Internet Application user interface that will change an industry and establish a new product category
• Create software to meet or exceed the highest industry standards for quality
• Work with other superior development team members in a collaborative, team oriented fashion
• Work with QA team to isolate and resolve defects in a timely fashion.
Required Skills:
• Superior Flash Actionscript development abilities
• Expert in OOP with AS 3.0
• Experience with Flash remoting is a plus
• Flex 2 Enterprise Service experience
• Flex Builder
• Cutting edge graphical user interface design abilities
• Proven new product development experience
• Demonstrated ability to meet schedule commitments with high quality software
• Proven abilities as a contributing member of a high performing engineering team
• Fast moving, self-motivated, creative thinker with exceptional process, analytical, engineering and relationship skills
• Understanding of Java, J2EE, App Servers, Workflow, Rules Engines, XML technologies
Work Experience:
• 3-8 years experience in Flash technology, including Flex Enterprise Services
• 3-8 years experience developing enterprise applications
• Demonstrable ability to produce cutting edge GUI’s with superior ease of use characteristics
• Insurance domain experience is a plus
Education Expectations:
Bachelor Degree in Computer Science or equivalent
Master’s Degree in Computer Science or equivalent is a plus
Company Description:
Web 2.0 Startup

I could do this... check out an old project that I started
3-4 years ago in flex 1.5 that I didn't complete because it was my
own project and I decided not to continue with the idea..
http://www.tharemix.com/
user: test
pass: test
it's:
Flex
C#.NET Web Services
Microsoft SQL Server 2005

LabVIEW Engineer Direct Hire 75k

LabVIEW Engineer, Full Time, FargoND
Purpose
Lead the development of automated test, data acquisition, and control systems using LabVIEW. Involves direct customer contact some travel.
Requirements
- BS in Science or Engineering.
- 5+ years of experience developing automated test, measurement, data acquisition, and control systems
- 5+ years LabVIEW and/or TestStand development experience
- Experience with a variety of programmable instruments. Experience with National Instruments hardware a plus.
- Experience writing system and software requirements specifications.
- Effective learning, utilizing, and applying new technology.
Helpful Skills
- Excellent verbal and written communication skills
- Strong hands-on hardware troubleshooting and software debugging skills
- Custom hardware design skills a plus, including fixtures, analog and digital circuits, cable assemblies, enclosures, and turn-key systems
- Experience creating documentation, UML, system diagrams, schematic diagrams, P&ID
- Project leadership, project management, engineering group leadership experience a plus
Responsibilities
- Design, develop, implement, and document test, measurement, data acquisition, and control systems using LabVIEW and TestStand
- Evaluate requirements specifications; Develop technical proposals
- Supervise and provide technical mentoring to junior engineers
- Devise, document, and oversee execution of test strategies
If you are interested in learning more please contact Bill Ties 1-800-357-8403 or [email protected]

Incorrect board. Please move to: LabVIEW Job Openings

LabView expert needed ASAP

LabView expert needed ASAP to help complete a project. Specific skills
needed are database connectivity experience with the LV Database
Toolkit. Initial phase is approx. 15-20 hours of work with the
potential for much more if we find the right person. Must be in Austin,
TX for initial on site work.
Job location is Austin, TX.
Compensation: $50-75/hr

Hello,
My name is Robert Bohannon and I reside in the Denver, CO area. I’ve attached my resume for your review. I have been doing automated test system development for over 15 years and have been an independent consultant for over 5 years. I’m writing you to express my interest in your job posting in the LabView Job Openings Forum. I am currently looking for contract opportunities and I believe that my services could be of great value to you.
Please review my resume and if you find any experience of mine that may potentially fit your job requirements, please let me know. I will provide references upon request.
Thank you for your time.
Robert Bohannon
Attachments:
resume.2006.05.21.pdf ‏315 KB

Houston LabView Programmer needed

Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227

There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time .

Labview engineer looking for job in china

I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]

Hi Alec,
Your organisation sponsor visa for non-local residents?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

Electrical Engineer with LabVIEW Experience - Needed Immediately - Windsor, CO

National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
* Government
* Aerospace
* Nuclear, Fossil & Wind Power
* Environmental Remote Monitoring
* Defense
* Medical
* Oil & Gas
* Manufacturing
Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities.
Requirements:
BSEE
Proven electronic hardware design and development experience
Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
Embedded microcontroller programming
FPGA programming
Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
Altium or similar electronics design package
Demonstrated proficiency with LabVIEW
Ability to solve complex technical problems independently
Good verbal and written communication skills
Ability to work in fast paced, high-pressure environment
Please submit your resume via email to [email protected] . Please include professional references and salary expectations.
Due to government contracting requirements, only US Citizens will be considered.
Learn more about us at http://www.nationalanalytics.com
No phone calls please.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Experienced LabVIEW engineer, Specializing in Semiconductor and Biotech/DNA applications; Bay Area or Online

I am an engineer-turned-LabVIEW programmer with 14 years of LabVIEW and industry experience in the San Francisco Bay Area
I have worked and programmed the following types of systems:
Semiconductors
Bioinformatics/DNA Synthesis and Sequencing
Digital Imaging
Fermentation
Solar Energy
Chemical Processing Systems
General Automation and Custom Analysis
Real-time and Embedded Systems
I can provide CORP-to-CORP hourly contracting, or it may be possible to work out licensing agreements, depending on your needs and the product.
Please contact me at [email protected] and see http://www.zojosoft.com for more information.
Jed Davidow

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

North New Jersey - LabVIEW Programmer Needed

Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected]

I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
John Wilson
[email protected]

Labview Programmer needed for project work in Milwaukee Area or over the internet

We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry. These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound.   We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made. Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture.
This position is not a full time position as of yet. We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication.  We perfer to hire somebody local but if we cant we can can do this over the internet. If you are interested, give us a reply with contact info. Thanks.
Regards,
Bill

    Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

Instrumentation/Automation Engineer needed for company based in Fort Lauderdale, FL

The Instrumentation Automation Enginner will work with the electrical motor control, variable frequency drives(VFD's), sensors, Programmable Logic Controllers (PLC's), robotics, temperature, pressure, level, and flow devices, PID loops, human machine interfaces (HMI) and others. The IA technicians will trouble shoot for efficiency matters. The IA Engineer will report to the VP of Hardware Engineering and Programs.
Requirements:
Expert in LabVIEW.
Lab automation using labview.
Experineced in LabVIEW Vision.
Experienced in LabVIEW CompactRIO (or equivalent). Experienced with LabVIEW FPGA.
Data acquisition and control.
High level of ability to programm in C/C++.
Advanced electrical technician skills.
Bachelors Degree in Computer Science or Engineering.
Ideal person would be National Instruments field sales engineer. Build/program electrical hardware.
To apply please send resumes (in MS Word or PDF format as an attachment) to:
[email protected]
In the subject line list your name & IAE

Is degree manditory requirement, or will industrial experience compensate for the lack of?

Labview engineer needed at Pune

Similar Messages

Maybe you are looking for