Labview Engineering Jobs
I am a recruiter for TRG. I am looking for Labview engineers for the Detroit metro area. Candidates need to be CLAD certified. If you are interested, please send me an updated resume to [email protected] and I will give you a call.
Thank You,
You should post in the LabVIEW Job Openings board.
You may also want to consider looking through the LabVIEW Developers Seeking Employment board.
Similar Messages
-
Seeking freelance job: LabVIEW and/or Controls, or other electrical engineering jobs
Hi all,
I am starting my consulting business and look for projects that need skills like LabVIEW, real-time controls, embedded system, etc. I am located on the east coast and able to travel occasionally, especially during the summer time. Please contact me (jianchu at gmail dot com) if you or your associates need help.
Thank you!
--JasonIneterested people can contact me at [email protected]
If anybody is also looking for outsourcing the LabVIEW development works, or planning to start a new LabVIEW development branch in India, I am interested in taking up these responsibilities.
Thank you. -
Labview Programmer Job Opening - Santa Clara, CA
Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o Must be well
organized and enjoy working in a dynamic environment.
o Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]Labview Programmer
-
I am looking for LabVIEW programmer job.
I am LabVIEW programmer with 6 years experience.
My expertise is optical communication, signal/image processing, C/C++.
I am living at Israel.
T.U in advance
Nadav Chernin
[email protected]It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
Parts of California are also looking hot. I just got this from my net-temps search agent:
1. Software Design Engineer
CA Valencia 6 - 9 months
http://www.net-temps.c
om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XSLN
2. Sr. RF Test Engineer (San Diego)
CA San Diego 0 - 30 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt278/300278-3074-13-72416
3. Lead Test Engineer
CA Torrance 12+ months
http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53706XJDC
4. Lead Engineering 3
CA Torrance 180 - 365 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt272/300272-1063-13-72458
Good luck,
- Kevin -
Seeking a LabVIEW Development Job in South India
Looking forward to work for a reputed organization.
Over 2 + years of experience in design and development of customized PC based Embedded software’s, automation
tool for audio and vision validation, Audio and Telematics Validation Test Cases design and Automation,Data
acquisition and Control Systems using LABVIEW 8.0/8.2/8.5 and NI DAQ Cards in the automotive and consumer
electronics industries.
Experience with GPIB Interface, VISA and Serial I/O Interface, Call Library Function nodes to interface with
third party and custom Dlls, Image processing, Software Triggering, Analysis of acquired data with mathematical
algorithms, Controlling and Monitoring applications, UART communication programming on PC side programming.
Experience in developing customized applications in areas like VB, C, and Java with good customer interaction.
Experience automating vision Validation tests with customized Test Sequences.
Ability to maintain large LabVIEW applications (> 250 Sub-VI's)
Ability to Write programs and applications to support our measurement and control hardware.
Presently working in an MNC Company.
Resume would be sent on request.Hi Suneel,
Kindly post this in the Job Seeking forums ,
So that you get better prospects .
This is for people willing to hire.
Regards,
Sundar. -
What is the Salary Range for Labview development job?
Hello,
Those here that work in labview development (as main role), what is your salary ($/Hour for freelancers | $/Month for hired one)?
thanksI was in Aero engineering and just graduated. I got offered 60 k to do Labview developement but I think I just got lucky. However, it seems like it doesn't really matter im in the 25% tax bracket and lose all my money to "the man" anyways
Edit: I should add I have about 8 months experience, not certified, and I have my B.S. degree. I believe this pay is just the company's standard for starting engineers.I have a friend who got an offer there, doing someting completely different, but same salary. Often something like that may come into play when determining pay.
Message Edited by for(imstuck) on 05-25-2009 12:07 PM
CLA, LabVIEW Versions 2010-2013 -
Hi,
I'm Anurag Srivastava pursuing my final yr B.E. (Electrical n Electronic) in India....I've cleared
LabVIEW CLAD certification exam....My areas of interest are Automation,Virtual
Instrumentation .....Kindly
do help me in seeking
jobs where LabVIEW
fresh engineers(CLAD
Certified) are of
demand...Hi Anurag,
Kindly mail your resume at
[email protected]
Regards,
Amit Garg -
Dynamic Ray provides comprehensive LabVIEW. VeriStand, and TestStand engineering services for software and electrical systems. We are dedicated to low cost solutions that improve production, test efficiency, and product quality. Our user interfaces are intuitive and elegant. We specialize in:
System Control
Automation
Data acquisition and logging
Embedded Systems
Test and measurement
Industrial automation
Motion control/robotics
We provide both hourly consulting and fixed price contracts. We are so certain that you will be happy with our service that you won’t pay unless you are 100% satisfied. Contact us at [email protected] or (408) 940-5804.Do you need H1B visa holders or developers able to work in the U.S. ?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Iam m.tech computer science 2014 pass
I have 10 months experience in labview coding .
can i find a suitable job profile for me suggest me the companies i can apply for
email id : [email protected]Hey,
I think you are on a wrong forum.Please apply here
forums.ni.com/t5/LabVIEW-Developers-Seeking/bd-p/JobSearch
Also there are lot more companies in india which works in Labview domain.
Please go to the list of NI Alliance Partners in India and apply separatly on there company websites
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera.... -
Engineering jobs - Nuclear Inspector
Engineering professionals needed for the UK HSE's Office of Nuclear Regulation. See http://www.youprotectpeople.co.uk/
Is it related to LabVIEW?
The best solution is the one you find it by yourself -
Automatic restart of Error-Message in Adapter-Engine (Job?)
Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
JürgHi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh -
Looking forward to work for a reputed organization.
Over 7 years of experience in design and development of customized PC based Embedded software’s, Industrial automations, ARM7TDMI Processor, Module Specific Driver Routines, Silicon Validation Test Cases design and Automation, Power Measurements, Audio Characterization, HDMI Characterization, PLL Jitter Measurements, LPC2104, ATMEL and PIC Micro Controller Programming, Programming Hand held terminals, Motion Controller Software’s, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side as well as on-chip programming.
Experience in developing customized applications in areas like VB, VC++, C/C++, and Java with good customer interaction. Experience automating Silicon Validation tests with customized Test Sequences
Presently working in an MNC Company.
Will send resume on request.Hi,
I have an opportunity as an SW test engineer availble in Orange County, California. This is a full time position with on of the world wide leaders in wired and wireless semiconductors. Can you please call me at your earliest convience at (949) 623 0003 or email, [email protected] I'm looking forward to hearing from you.
Best Regards,
Luke Doherty
Technical Recruiter
APEX Systems, Inc.
4100 Newport Place
Newport Beach, Ca 92660
(949)623-0003
(866)536-2739 Toll Free
(949)623-0004 Fax
[email protected]
www.apexsystemsinc.com -
Looking for Labview programming jobs in embedded systems
I am a Canadian citizen graduated with Mechatronics degree from University of Waterloo, currently employed in Boston area as an Electrical Engineer until the end of my contract in August 2009. I have over 3 years of R&D experience in the high tech industries, mainly focus on embedded and electronic applications controlled through Xilinx FPGA programmed in Labview. I have extensive knowledge of digital and analog applications controlled by microcontrollers, FPGA, and microprocessors, as well as pragramming firmware interfaces on and off the circuit boards.
I require TN-1 visa sponsorship to work in the US, which is very easy to obtain. I am willing to relocate to many parts of USA to work full time or contract. Please contact me at [email protected] if a position becomes available.
David Zhou
Electrical Engineer
CIMIT/MGH
65 Landsdowne St, Cambridge, MA, 02139
p: 617-768-8759You still around, contact [email protected]
-
Error 1722 when installing Run-Time Engine 6.0
I am unable to install the necessary LabView Run-Time Engine 6.0 required to run my VitalView Software. I have reviewed the message boards and attempted all possible solutions: disabling anti-virus programs, following the NI support links: http://digital.ni.com/public.nsf/websearch/334E91287EDEA75286256D9B003A947A?OpenDocument.
None of these methods will allow for the Run-Time engine to be installed. What can I do?
Help very much appreciated, thank you!My OS is Windows XP.
I am trying to install an older LabView run-time engine since my application VitalView asks for a LabView 6.0 Run-time engine (or something compatible).
I have attached the jpg of the error message that I receive whenever I attempt to install the LabView engine.
Thank you so much for your help!
Attachments:
Error1722.jpg 57 KB -
Systems Engineer(LabVIEW)
Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal
Maybe you are looking for
-
Cannot access my Iphone 3gs after upgrading to 5.01
Hi, I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week TillI connected my Iphone to ITunes and they notify me I needed to upgrade my Software and I accept. That was the mistake I made as it upgraded to 5.01 and I cannot access mypho
-
Backup Database Task - User Permissions
Hi I am currently implementing an SSIS package to cater for the backup of our database system. I am using a Back Up Database Task connecting to the database using SQL Authentication. This login has public server rights and db_backupoperator databas
-
Error in Goods Recipt Purchase Order
Hi, I am in t.code: MIGO_GR-- 3rd party sales order receive goods. I was trying to do Migo_gr, the OK check box became inactive and while saving i am getting the following message: "you have not flagged any items as OK". please advice me to slove th
-
When I sync my phone it syncs my pics from my "pics" folder to my Photo Library as well as it has a folder called pics right under my Photo Library thus creating two folders with all the same pics, is there anyway to get rid of the pics folder from m
-
HT203167 Bulk recovery of missing music?
After organizing my library, it appears that several thousand songs are missing from my iTunes library, as indicated by the exclamation points next to the songs. All the songs can be located on my external hard drive, in their appropriate folders (o