LabVIEW Equivalent of 'Whos' command in MATLAB

Hi 
Similar to 'Whos' command in MATLAB I wanted to list all the constant and controls (if possible) I used in my LabVIEW code. Does anyone know if its possible with any additional code or Toolkit. 
Thanks in advance. 
Thanks & Regards,
Kunal Raithatha.
CTD - CLAD (I wish I can take off that A, and maybe use it later to replace D :-)
Easy Tip :- "To copy an image to a VI icon, drag the image file and place it on the icon
located in the upper right corner of the front panel or block diagram" ...If you know any
more reply back.

Smercurio_fc
Pupose is to enlist name and value of constants n controls I used in quite a big VI, values of the constants are often manipulated to adjust the requirement. It will be good at the end if I can print them altogether. 
Thank You.
Thanks & Regards,
Kunal Raithatha.
CTD - CLAD (I wish I can take off that A, and maybe use it later to replace D :-)
Easy Tip :- "To copy an image to a VI icon, drag the image file and place it on the icon
located in the upper right corner of the front panel or block diagram" ...If you know any
more reply back.

Similar Messages

  • LabView equivalent to running batch files using the "shell" command (VisualBasic)

    I'm converting a VisualBasic app to LabView and am having trouble figuring out how to run a batch file with LabView.
    The VB code that I'm trying to replicate is:
    'UNLOAD RTX DRIVERS
    Dim ProcessId As Long
    ProcessId = Shell(App.Path + "\UnloadReloadRTX.bat", vbNormalFocus)
    Wait 400
    I haven't found a LabView equivalent to the Shell command. Any suggestions will be appreciated.
    thanks,
    Todd

    It seems as if this question pops up every week. Use the System Exec.vi found under Funtions - Communications palette. It is the equivalent of Shell.
    - tbob
    Inventor of the WORM Global

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • [solved] who command doesn't show X server session

    Hi there,
    shouldn't the `who` command show all logged in user sessions, including my X server session?
    However, who only shows my tty1 session:
    [orschiro@thinkpad]$ who
    orschiro tty1 2013-10-25 17:01
    What is the output of who on your system?
    Last edited by orschiro (2013-10-27 20:21:32)

    Alright. The point is, what do I need to do in order that who shows my X session?
    I tried export DISPLAY=:0 but this doesn't add :0 to the who command listing.
    The reason I am asking is that I want to use the following dispatcher script which queries for :0, assuming that who shows the display variable.
    #!/bin/sh
    INTERFACE=$1 # The interface which is brought up or down
    STATUS=$2 # The new state of the interface
    case "$STATUS" in
    up) # $INTERFACE is up
    USERS=$(ps -o user --no-headers -C dropbox)
    killall dropbox
    for user in $USERS; do
    su -c "DISPLAY=$(who | sed -e "/$user/! d;/pts/d;s/^.*[^0-9]\\(:[0-9.]\\+\\).*$/\\1/p;d" | head -n1) dropboxd &" $user
    done
    down) # $INTERFACE is down
    esac
    Last edited by orschiro (2013-10-27 07:04:25)

  • What is the Mac equivalent of the command "ctrl shift  I"  for a PC

    HI
    what is the Mac equivalent of the command "ctrl+shift + I"  for a PC to get to the cookies and delete them

    It varies depending on which browser you're using. In Safari, choose Preferences from the Safari menu, click on the Privacy tab, and then on Details.
    (101212)

  • Question on "who" command in Unix

    Dear all,
    I am accessing a Unix (Solaris 10)  host via putty. I login as root and I execute the who command.
    I get an output like the below
    root       pts/2        Jan 22 08:16    (423t51j.virago.internal.uk)
    where 423t51j is the network name of my PC
    Hours later, I connect from the same PC with putty and execute "who" but the terminal name appears different
    root       pts/2        Jan 22 11:16    (423t51j.finance.local)
    Any ideas where this is set and how I can make it stay with the correct network name (which is the second , finance.local )
    Many thanks
    Andreas

    This is probably pulled from the your DNS server based on your incoming address (or maybe your hosts file if DNS is unreachable). Have you tried running the 'who' command several times to see if this changes?
    Just a thought.
    J. Haynes
    Denver, CO

  • Labview equivalent of C pointer

    Dear All,
    In the Labview program, that I'm currently writting, I'm using a dll that was written in C. The C function I'm trying to call, is expecting a pointer to char in its prototype like so: void example(unsigned char *a); What is the Labview equivalent of a char *.
    Thanks in advance for your help,
    Regards,
    Alan

    There is a difference in passing a char type and a char array (string).  First of all, C expects the string to end with the NULL character (\0).  You need to append the NULL to the string, then convert the string to a byte array (String to Byte Array function).  Then in order to pass the array to the C DLL, you need to declare the parameter as Type=Array, Data Type=U8, Dimensions=1, Array Format=Array Data Pointer.  This will pass the string into the DLL.
    - tbob
    Inventor of the WORM Global
    Attachments:
    GetFirstFile.png ‏2 KB

  • Equivalent de la fonction plot (Matlab) sur Labview

    Bonjour,
    Je suis débutante un Labview et j'ai un petit problème :
    Dans mon VI il y a une partie Matlab qui trace 4 cercle :
    for m=1:4
      xe(m,: ) = R(m)+cos(alpha)*xc(m);
      ye(m,: ) = R(m)+sin(alpha)*yc(m);
    end
    Si j'écris : plot (xe(m,: ),ye(m,: )) dans la partie Matlab, quand je lance mon VI il me trace bien 4 cercles dans une nouvelle fenêtre.
    Maintenant, j'aimerais que mes xe et mes ye (mes cercles) apparaissent sur ma face-avant et non dans une nouvelle fenêtre. Pour ça j'ai essayé d'utiliser Graph XY mais ça ne fonctionne pas (je pense que c'est parce que xe et ye sont tous les 2 en 2D).
    J'aimerais donc trouver l'équivalent de la fonction plot de Matlab mais sur Labview. Quelqu'un peut m'aider ?

    Voilà ce que j'ai tenté de faire dans un premier temps pour afficher mes cercles dans un graph ( en PJ):
    (le but final étant de relier mes cercles à la place de sub_ed2)
    en PJ, il y a aussi l'affichage de mes cercles avec la fonction plot de Matlab
    Pièces jointes :
    pb labview2.png ‏248 KB
    pb labview2-bis.png ‏6 KB
    pb labview2-biss.png ‏32 KB

  • Labview equivalent to matlab filter function

    Hi
    I have a script In Matlab that is using the built-in filter function in matlab.
    y = filter(B,A,x);
    were x is the signal to be filtered and A/B is the filter coefficients.
    Is there a labview function that gives my the same y as Matlab does if x, A and B is the same.
    Best wishes 

    sorry. I post some Matlab code and VI to demonstrate.
    Matlab code:
    clear;
    x = 1:12;
    A = [1 2 1 1];
    B = [1 1 2 1];
    y = filter(B,A,x)
    %y =
    %     1     1     4     2     8     0    17   -10    40   -45   107  -157
    y2 = filter(B,A,x, [0 1 0]')
    %y2 =
    %     1     2     2     5     3     9     1    18    -9    41   -44   108
     and my VI is attached (screenshot). My Y is correct to the first filter call to matlab (y = y in both lw and matlab). And that is good. But the other call use a the vector Zi = [0 1 0] and from Matlabs help
    [Y,Zf] = FILTER(B,A,X,Zi) gives access to initial and final
        conditions, Zi and Zf, of the delays.  Zi is a vector of length
        MAX(LENGTH(A),LENGTH(B))-1, or an array with the leading dimension 
        of size MAX(LENGTH(A),LENGTH(B))-1 and with remaining dimensions 
        matching those of X.
     Any idees how this can be done in LabView or what the Zi does in the Matlab implementation?
    Message Edited by Tudor on 02-11-2010 09:29 AM
    Attachments:
    lw-filter.jpg ‏55 KB

  • Invoke Labview applicatio​n from Command line

    hi,
    I have a labview program which does some analysis on my Test data.
    My application is that,i have a Test sequencer program(Different application) which collects data and stores it in .dat file.
    After this i invoke exe of Labview Analysis program from Test sequencer & i enter the Test data filename as a command line argument.
    My first step in  analysis program is read command line argument(thru App.Args property) & get filename(the command line gives array output , index 0 will be Labview,index 1 will show filename)
    This works absolutely fine.
    I made a copy of this analysis prog to include some more functionalities and renamed it as different Labview program(prog structure is same) & trying to do the same abovesaid process.
    But somehow im not able to get Command line arg(basically here filename) passed to labview.
    The error im getting is that it's showing the path of my application (say if my application is in C)."C:\xxxx.dat is not a LABVIEW data file".
    My question is:
    Is there any settings changes to be done for Command line args property node when we make a copy from one prog to other prog.? Im not having clue why this should occur?
    -Murali

    Just to confirm I understand what you are asking... you copied the App.Args property from one vi to another, compiled the new vi to an exe, new exe doesn't receive the command line parameters.
    Did you make sure the "Pass all command line arguments to application" check box (in the 'Advanced' category of the application builder) was checked for the new application?
    Troy
    CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
    I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
    Beware of the man who won't be bothered with details. - William Feather
    The greatest of faults is to be conscious of none. - Thomas Carlyle

  • Labview binary file format, reading in matlab

    Hi,
    I have some binary files that I wrote in Labview containing data of type double.  I'm trying to load the data in Matlab but I am not having much success.  In Matlab I am using the fread command and specifying the type as double with the machine format as 'b' for big-endian.  But the values I get do not make any sense.  Does anyone know what format Labview saves the data in?  Is it big-endian?  Or something else?
    Thanks,
    Todd

    LabVIEW stores data in BIG endian format. This was done to maintain compatability between all of the different platforms that LabVIEW runs on. And of course is an inheritance of the original Macintosh LV versions. There is a shipping documents that presents all the data storage formats. Just do a search in the LabVIEW bookshelf.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Oracle equivalent of MySql commands and code.

    Hi,
    Does anyone know the Oracle equivalent of the following? I'm not a DBA and my DBA doesn't know MySQL. TIA
    Assign access rights: login as root user to mysql:
    mysql -uroot -pYourSecretPassword
    On some MySQL installations, the root user has no password, in that case drop
    the -p parameter.
    Then grant the necessary access rights using the following commands: (this will
    automatically create the users)
    GRANT ALL ON daisyrepository.* TO daisy@"%" IDENTIFIED BY "daisy";
    GRANT ALL ON daisyrepository.* TO daisy@localhost IDENTIFIED BY "daisy";
    (The localhost entries are necessary because otherwise the default access rights
    for anonymous users @localhost will take precedence.)
    and create the database using:
    CREATE DATABASE daisyrepository;
    jack

    GRANT ALL ON daisyrepository.* TO daisy@% IDENTIFIED
    BY "daisy";This means:
    GRANT ALL privileges
    ON all tables and views in schema 'daisyrepository'
    To user daisy from any host.
    There are several problems in translation to Oracle:
    1) Oracle has a few more privs than MySQL, in part because there are a few more object types. You need to be more restrictive than 'GRANT ALL';
    2) Oracle does not support wild cards or patterns grants against a schema's objects. You need to specify each object individually;
    3) Oracle users are database users, not host users, so daisy@% does not make any sense at all. You specify the database user name, or perhaps group users into roles and specify the role name.
    This is discussed in the SQL Reference manual, in the 'GRANT' chapter, for each version of the database. The docs are at http://docs.oracle.com
    Have fun :-p

  • Labview is using stale command line arguments

    I've created a vi to test passing command line arguments to Labview. I've attached it below. All it does is display the 1st and 2nd arguments. Also in VI Properties in the Execution category, it's set to 'Run when opened'.
    In the command prompt I'm entering: "C:\Program Files (x86)\National Instruments\LabVIEW 2014\LabVIEW.exe" "C:\Users\command_line_arguments.vi" -- a b
    This works - the vi launches, and displays a and b. However, if I run it again from the command prompt with  -- a c  as the arguments, it still displays a b. Only if I exit the vi, and quit LabVIEW (so that LabVIEW.exe stops running) then launch it again from the command line does it display a c.
    So for some reason Application:Command Line Arguments is using stale data, and ignoring the new arguments. Is this a bug, or am I using it in the wrong way? Thanks.
    Attachments:
    command_line_arguments.vi ‏8 KB

    lv_manchester wrote:
    So for some reason Application:Command Line Arguments is using stale data, and ignoring the new arguments. Is this a bug, or am I using it in the wrong way? Thanks.
    That's normal behavior, the command line arguments are always the ones with which LabVIEW was first started. I think most single-instance applications work this way, although it's not something I've ever tested. Attempting to run LabVIEW again will just bring the already-running application to the front.

  • Equivalent of audiowrapper command?

    I can't get sound on vmware for the life of me (even using the vmwareesd command), and I wanted to try what this thread says:
    http://forum.linspire.com/viewtopic.php?t=422427&
    Try this:
    audiowrapper --alsa-native /usr/bin/vmware
    However, it seems like the command audiowrapper is on Linspire and Linspire alone, and I can't even find any way to download it and try installing it on Arch myself. Is there any other way to tell vmware to use ALSA like that, so I can have sound?
    Last edited by violagirl23 (2008-06-18 19:25:59)

    I need to manually DEFRAG/SHRINK space in some tables
    on a 9i database. In 10g i usually issue
    ALTER TABLE SEGMENT_NAME SHRINK SPACE CASCADE after
    enabling row movement.
    What is the equivalent of SHRINK in 9i?That's new feature in 10g, no equivalent in 9i.
    In 9i, you could reorg your tables using ALTER TABLE .. MOVE TABLESPACE method.

  • LabVIEW et logiciels statistiques (R, Scilab, Matlab, ...)

    Bonjour,
    Nous avons développé des applications mêlant des acquisitions et des calculs statistiques. Les acquisitions et les calculs sont pseudo-temps réel (acquisition/analyse/sauvegarde/affichage en moins d'une seconde).
    Jusqu'à présent, nous passons par une DLL C mais nous aimerions utiliser un logiciel "stat" pour simplifier nos futurs travaux.
    Nous avons entendu parlé du logiciel R. Est-ce possible de lancer un script sous R via LabVIEW et de récupérer les résultats des calculs dans l'appli LabVIEW?
    Si oui, comment et est-ce assez rapide?
    Sinon, avez-vous déjà utilisé Scilab et/ou MatLAB? Qu'en pensez-vous?
    Merci pour votre aide.

    Bonjour,
    Merci pour cette réponse.
    Nous n'aimons pas trop ActiveX car il est un peu trop "Microsoft dépendant". Nous avons eu déjà des problèmes avec une de nos applis en changeant de Word (par exemple): le service informatique ne demande pas notre accord pour installer telles ou telles mises à jour sur un poste...
    Pour le script (Matlab, Scilab), nous avons effectivement vu ces techniques mais cela ne convient pas à l'usage que nous voulons en faire, à savoir:
    - nous recherchons puis validons un protocole statistique avec un logiciel "spécialisé" et plus adapté
    - nous intégrons ces calculs statistiques dans notre appli LabVIEW en minimisant leur requalification.
    En important un script dans un code LabVIEW, rien ne garantit que personne n'a touché par mégarde au code Matlab/Scilab donc nous sommes obligés de revalider les calculs statistiques une fois le programme LV terminé.
    Avec un code compilé, nous pouvons garantir que le code statistique, une fois validé, ne peut être modifié. D'autre part, cela nous permettrait de corriger/modifier éventuellement les calculs sans avoir à requalifier toute l'appli.
    Nous voulons bien "séparer" les 2 parties pour:
    1 - minimiser les étapes de qualification
    2 - simplifier les mises à jour
    Nous cherchons donc un logiciel statistique qui puisse générer un code compilé ou utiliser un protocole de com compatible avec LabVIEW. Nous connaissons bien LabVIEW et ses possibilités mais au niveau logiciel mathématique compatible, nous n'y connaissons rien.
    Des statisticiens nous ont parlé de R mais n'étant pas des programmateurs ni des experts R, ils ne pouvaient pas nous dire s'il pouvait générer des codes compilés et/ou "dialoguer" avec LabVIEW.
    Matlab pourrait, nous a-t-on dit, générer des DLL/EXE mais de là à pouvoir les exploiter sous LabVIEW, nous n'en savons rien.
    Nous continuons à chercher. Encore merci.

Maybe you are looking for

  • How to store context data into a database table?

    Hi All,   I am very new to Web Dynpro ABAP. I am trying to store context data into database table. For this i need to write some code. I have created one context attribute to store data and i have one database table. Know i want to store that context

  • Modify the text of a button.

    Hello friends, Is it possible to change the short description of a button (application toolbar) in a standard transaction? I am trying this using SE63 but without success. Does any one know how to use the transaction? Thanks …

  • Augmented reality for iOS

    Anybody have a good link on developing an Augmented Reality app for iOS. The only thing I can find is this... http://www.adobe.com/devnet/flash/articles/augmented_reality.html ...which is outdated. I cannot find anything out there with folks using AI

  • Error:6 when a non-admin user tries to run Adobe Photoshop Elements 9

    Loaded Photoshop Elements 9 on a computer that is not on the internet and works fine as long as the user logging into the computer has admin privileges but a user who does not have admin priviledges gets an Error:6 that says to uninstall and reinstal

  • Oracle Personal 9i for XP download doesnt work

    When I download any of the Oracle Personal 9i files to my drive and try to open them I get a "Cannot Open File, It doesnt Appear to be a valid archive" error. I tried opening the file on win2000 and winxp operating systems with WinZip installed and g