Labview error GPIB controller not adressed correctly

I get this Labview error: GPIB controller not adressed correctly (LV5.1, win NT4) when i try to send data to a HP4275A LCR meter. How ever it works on an older system running with LabView 5.0 (also NT)!!!
How can I get rid of this problem????

Hi Diego, thanks for the hints!
I tried to configure (GPIB) everything standard.
when I try a 488 command initialze, I get the controller conflict, when i don't do this I get atime out problem either by 488 write-command or by 488.2 send-command.
the differences between the systems where it works and where not are:
working: Win 95, LV 5.0, GPIB-card/TNT (plug & play)
not-working: WinNT, LV 5.1, GPIB-card/PCI
i tried to set baord config to the same parameters...
on the faulti system however I see the instrument with the MAX and I can send commands, without problems !!!!
Also the driver you posted does not work (but the NI-communicate program ;-)
i have no clue what else to do!
btw. how do I copy the spy output when running the program? I may provide
this to find errors.
Since MAX indicates the board is all right I guess it is not necessary to reinstall the boarddrivers?!

Similar Messages

  • TS3694 Trying to install new version of I tunes. Get the following error msgs:Itunes not installed correctly reinstall (Windows error 126), and missing file MSVCR80.DLL?

    Trying to upgrade Itunes get the following error msgs: Itunes not installed correctly reinstall (Windows error 126) and missing file MSVCR80.DLL?

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98972)

  • Error: JAVA_HOME is not defined correctly - While running ant.

    I have upgraded the JDK 1.5 Update 10 to Update 14. After upgrading the ant is failing when using with cygwin.
    It's giving the below error message:
    Error: JAVA_HOME is not defined correctly.
    We cannot execute /cygdrive/c/Java/jdk14/bin/java
    The JAVA_HOME is set properly & even I am able to check java -version.
    I am using apache-ant-1.6.5 and cygwin.
    Have any one faced the same problem?
    Please let me know if you have any solutions

    Grrrr. Been having a similar problem, but with Maven2. Allow me to (hopefully) save someone the gnawing of teeth and several bald patches.
    For starters, the Maven documentation gives you a pretty clear example of how to set your PATH. This is as follows:
    export PATH=/usr/whatever/whateveragain/apache-maven-2.0.10/bin:$PATH
    Simple, eh? Note the colon before $PATH. Then, it states quite presumptuously "4) Make sure JAVA_HOME is set to the location of your JDK". However, you don't set it in exactly the same way. You set it in virtually the same way, except without the colon, like this:
    export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0$JAVA_HOME
    Note that if you get the paths wrong a couple of times, you may reset them with the unset command. So to unset JAVA_HOME you'd use:
    unset JAVA_HOME
    After which you may set it again. As is advised, you may try to set the user privileges, but they didn't seem to affect my luck at all. Hope this helps!

  • LabVIEW error code3: Could not load front panel.

    Hi 
    I am getting second time the "LabVIEW error code3: Could not load front panel." when working with the development environment of LabVIEW 2009 SP1.
    It is really annoying as I loose time as I have to revert to saved previously code. 
    Does anybody know where it may be coming from and how to avoid it?
    Thanks
    Pawel
    Solved!
    Go to Solution.

    Pawel,
    the panel has an origin which you can see in your VI:
    Every element will be placed in a position in regard to this origin:
    The position has a limit in regard to the bound. I am not sure about the value, but it should be around -35k...35k (or the double of it)....
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Lookup Query error: "Lookup properties not configured correctly"

    Hi!
    I have come up with some problems on configuring lookup query.
    I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
    I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
    For Lookup Query:
    This were the steps done on design console -->form designer-->properties tab:
    On " Grupo(lookupfied) " I set the following properties:
    Column widths = 100
    Lookup Query = select Organization from test_lookup
    Lookup Column Name = Grupo_teste
    Column Caption = Organization
    Column Names = Grupo_teste
    On design console for Lookup definiton I set the following:
    code: Lookup.KON.Grupo_teste
    field: Grupo_teste
    Lookup type: checked
    Required: uncheked
    Code key | Decode Key
    Organization Organization
    Any idea why this is hapenning? Any suggestion is more than welcome!
    Thank you.
    Kind Regards,
    Kon

    Refer this:
    User list lookup
    Column Names = usr_key,usr_first_name,usr_last_name
    Lookup Column Name = usr_key
    Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
    Column Captions = User Key,First Name,Last Name
    Column Widths = 10,100,100
    Have you tried this:
    b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
    In lookup coloumn name=act_key
    In coloumn width =100
    In coloumn names=act_key
    in coloumn caption =Organization Key

  • How to fix this error: "Scanner is Not Operating Correctly"

    My MP830 (purchased in 2006) will print from my computer but nothing will print  or scan when placed on the scanning bed.  The error is:  "Scanner is not operating correctly."  How can I fix this?  I do have the Set Up CD-Rom with the Driver, Application Software, and Manual on it and the other identifyers on the disk are:  USCD 1.1  QH7-2342
    I am not very tech savvy and would like to get this scanner working properly.  Help please.
    BurninToLearn
    Solved!
    Go to Solution.

    Hello!
    So that the Community can help you better, we will need to know the version of Windows or Mac in use.
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • I get the error message, iTunes not installed correctly. Error 7 (Windows Error 998).  Any suggestions?

    I have uninstalled and installed iTunes several times since it stopped working about a month ago. I get the following error message when I try and open it...
    iTunes not installed correctly.  Reinstall iTunes. Error 7 (Windows error 998)
    Any suggestions on how to proceed?

    Hi there. I am getting a similar message today.  Here is the message I get; if you could help me that would be great:
    the procedure entry point kCMPyteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
    I've read other posts talking about QTXX.dll problems but this one seems different.  Any suggestions b noir? Thanks!

  • Has anyone ever received the error Itunes was not installed correctly.  Please reinstall Itunes Error 7 Windows error 126

    I had to reinstall my Itunes account and after installing received this error: This application has failed to start because MSVCR80.dll was not found.  Reinstalling the application may fix the problem.
    The other error message that displayed after I tried to reinstall it was "Itunes was not installed correctly.  Please reinstall Itunes Error 7 (Windows error 126).
    Any assistance with correcting this matter is greatly appreciated.  My ipod is fine, I just need to reinstall Itunes on my computer.
    Thanks,

    There has been a lot of that lately, try following the instructions of tt2 in https://discussions.apple.com/thread/5822086 to fix it.

  • Itunes not installed correctly  error 7, itunes not installed correctly  error 7

    When I updated itunes, it did not installcorrectly.  I get "  C:\Program files (x86)|iTunes|iTunes.exe  R6034.  An application has made an attempt to load the C runtime Library incorrectly
    Then when I retry, and it tries to load , I get " iTunes not installed Correctly.  Error 7 (windows error 1114)
    Can anyone tell me how to fix this a nd gt Itunes running.  I am using Windows 7

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Unbreakable Linux error: That's not the correct Enterprise Linux CDROM

    I eagerly downloaded Unbreakable Linux (4 CDROMS) and tried to install it in a VMWARE (Workstation 5.5.1 build-19175) virtual machine.
    I choose RHEL 4.0 32bit as a base (Typical VM configuration).
    All went fine until disc 3 was asked for during install. I got a "That's not the correct Enterprise Linux CDROM" error. I tried also to mount the other ISO's but that didn't work out either.
    Frustrating.
    The mediacheck results in PASS for all 4 CD's - and they all are all recognized correctly. So I made sure I got the complete set.
    Anyone a shot...?
    Greetings Bart.

    Hey,
    You cat chack the sha1sum of you're file.
    My CD's working fine and this is the results of sha1sum :
    sha1sum /data/Oracle/V1014*
    ea069b4c7f6e58f3f11b76fc6ce07cac377951c4 /data/Oracle/V10142-01.zip
    9417a26291bf90ca047cbbf0203330b693bc9afa /data/Oracle/V10143-01.zip
    6bb69b35c00b4a6891a1c4c9a17f62177c8df7b2 /data/Oracle/V10144-01.zip
    080c9ee4ebbeedde9d7f72cde37c7eec4cfe9675 /data/Oracle/V10145-01.zip
    linux-jn6s:~ # sha1sum /data/Oracle/Enterprise-R4-U4-i386-disc*
    b1d326c2c59821bcc5ab515e5d35809121f7fb5f /data/Oracle/Enterprise-R4-U4-i386-dis c1.iso
    3e04c9c9cf7672f5b97181edaa0119778fa38486 /data/Oracle/Enterprise-R4-U4-i386-dis c2.iso
    a1012454a81203006cf4a880b5942eb6068c7bea /data/Oracle/Enterprise-R4-U4-i386-disc3.iso
    97ca9d546d2b94a664ec46dcdd9fa00791d62dc1 /data/Oracle/Enterprise-R4-U4-i386-disc4.iso
    Ofek Doron
    Penguin IT

  • Error: property is not set correctly for User Defined Fields.

    Hi Gurus,
    I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
    I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
    Thanks,
    sat

    Hi Kevin,
    I couldnt get it done. This is what I had done so far.
    Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
    Added two field in xlwebadmin.properties & xlwebadmin_en.properties
    lookupfield.header.users.deptcode=Department code
    lookupfield.header.users.deptname=Department name
    In my lookfield properties in
    column caption=Department code,Department name
    Column query= Not sure what to give? here
    Thanks,
    sat

  • Problem with Vision Builder and LabView: Error -1074395995, File not found

    I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
    Possible reason(s): IMAQ Vision:  File not found.
    But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?

    Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
    Hope this helps,
    Brad
    Attachments:
    Generated Code.png ‏43 KB

  • Error message is not in correct format in portal

    Hi,
    I am passing message into i_messages table in User Exit CATS0003 .
    Syntax Code:
    I_MESSAGES-MSGTY = 'E'.
    I_MESSAGES-MSGID = Message class name
    I_MESSAGES-MSGNO = Message no.
    I_MESSAGES-MSGV1 = Message Text.
    Append I_MESSAGES.
    But the error message populating from Exit is not being displayed in correct format in Portal.
    Message coming is like this:
    :/kgo/tm:032 Engagement code is not open during time entry.
    But the correct format should be:
    Engagement code is not open during time entry.
    Thanks in Advance.
    Madhu
    Edited by: Madhusmita Acharya on Jun 3, 2009 2:13 PM

    Hi Max,
    Yes message number of the message class is existing.
    In fact Message is coming in portal but extra message class name (/kgo/tm)and message no.(032) is coming like below
    I dont need these Message class & Message no. in message as below
    /kgo/tm:032 Engagement code is not open during time entry.
    I need message like below one.
    Engagement code is not open during time entry.

  • How to handle LabVIEW Error 3: Could not load front panel

    I was working on an application, running a vi when the computer turned off. It took me a little time to start the computer again (is not an old computer, is a P4, 1GB, ABIT IG7 MotherBoard). After I unplugged and plugged the Power Unit it was possible to start the computer, before starting, it says that a CPU problem occured and press F1 to continue. Afer press F1 Windows started normally. Then I tried to open the vi in which I was working when the problem occured and LabVIEW says:
    LabVIEW: Resource not found.
    An error occurred loading the vi.
    LabVIEW load error code 3: Could not load front panel.
    The question is, can I open my vi someway or I just lost it?
    I will really appreciate your answers since I have been working for a long time in this vi.

    Well, I'm faced with this problem now.  VI started its life as a 9.01 LV 2009/Vision 2009 on a given machine.  Copied to another machine wth 7.1, 8.2 and 9.01 on it.  Opened with 2009, saved it for 8.0.  Opened it with 8.2, saved it for 7.1.  Opened it with 7.1//Vision 7.1.1,  edited it, saved. File appears to be fine.
    Now trying to open it with either 8.2 or 2009 (9.01) fails with error code 3.  Note that it still opens with 7.1, so the front panel is there.  Anyway to fix this?

  • Satellite M-115 S1061 Ethernet Controller not configured correctly

    Hi all. I'm the third person who's owned this laptop and I have none of the original documentation, software - nothing. I recently had to reinstall the OS and since I didn't have the original OS I had to use another copy of WinXP pro that I had. Well, the network adapter is installed fine and working correctly, but the ethernet controller is not. I don't know a lot about these things, but I thought that if one was working right the other should be too. Do they use different drivers? I tried the file here:
    http://cdgenp01.csd.toshiba.com/content/support/downloads/lan_driver_realtek_25058B.exe
    and I tried the latest file from the realtek site, for my Realtek RTL8139 Family Fast Ethernet NIC.
    Neither of those solved the problem. The Ethernet Controller is still there in DM with an exclamation mark next to it - along with the SM Bus Controller. Could the bus controller be the reason the controller won't install right?
    What am I missing? Any help will be greatly appreciated.

    Thanks, all, I appreciate the replies. Unfortunately, the problem persists. I've downloaded all drivers, installed everything I could find for the M115. Everything is working fine (including now the SMBus controller) EXCEPT the Ethernet Controller. It's still not installed properly. I've manually searched for a working driver in every lan driver download for the M115 I could find, and also the PCI_Install pack from the Realtek site. None of them work.
    Someone please clarify something for me: is the ethernet controller a component of the Network adapter or is it related to the wireless card? I'm thinking it must be for the wireless because I don't have it on my desktop system, which doesn't have a wireless card. But if it's for the wireless, why can't I get an internet connection through my cable modem? The Network adapter on my laptop is working, and I see that all the settings are exactly the same as on my desktop, and when I run IPconfig it shows an IP address and subnet mask, but I keep getting that message that my conenction has limited or no connectivity. In addition to the Client, File & printer Sharing, QoS Packet Scheduler, and the Internet Protocol, should I be seeing anything else when I look at the Connection Properties of my laptop? (And for the record, I've installed the wireless drivers too.)
    Could the problem have something to do with me using WinXP pro rather than the home edition originally installed on the laptop? Maybe none of the drivers are compatible with the pro version? Doesn't seem likely, but I'm getting desperate here. Also, is it possible I get no internet connection because I'm not using the original computer I set up my internet on? Something to do with different MAC addresses or something?
    TIA!

Maybe you are looking for