LabView expert needed ASAP

LabView expert needed ASAP to help complete a project. Specific skills
needed are database connectivity experience with the LV Database
Toolkit. Initial phase is approx. 15-20 hours of work with the
potential for much more if we find the right person. Must be in Austin,
TX for initial on site work.
Job location is Austin, TX.
Compensation: $50-75/hr

Hello,
My name is Robert Bohannon and I reside in the Denver, CO area. I’ve attached my resume for your review. I have been doing automated test system development for over 15 years and have been an independent consultant for over 5 years. I’m writing you to express my interest in your job posting in the LabView Job Openings Forum. I am currently looking for contract opportunities and I believe that my services could be of great value to you.
Please review my resume and if you find any experience of mine that may potentially fit your job requirements, please let me know. I will provide references upon request.
Thank you for your time.
Robert Bohannon
Attachments:
resume.2006.05.21.pdf ‏315 KB

Similar Messages

LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Help needed asap! Will my IPAD 3G wifi work in another country with the sim of a 3G services provider?

Help needed asap! I want to buy an IPAD 3G + Wifi before I return to my country from the US. The problem is that I have GSM service providers in my country that provide 3G services but I am wondering if their SIM card would work in the IPAD? In other words, can I get an unlocked IPAD 3G wifi? Thanks for helping out

The AT&T 3G iPads (which are GSM/sim based) in the US are not locked (the Verizon models are CDMA based so they effectively are). So as long as you can get a sim in your own country you shouldn't have a problem

Signal Processing and LabVIEW Expert Full Time Position – London, UK

1x Signal Processing and LabVIEW Expert - Full Time Position – London, UK
1.0      Description:
As a Signal Processing/Software Engineer, you'll be part of a team that is responsible for developing applications based on large high speed data analysis for a large green energy project. Your skills must include a knowledge of Waveform analysis and understand the concepts of cross correlation, Fourier Analysis, Spectral analysis and other similar items.
The position ideally requires someone of CLA level of LabVIEW program to act as the project lead on the programming and technical levels of the system.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Understanding of the data acquisition side of the system and previous experience using National Instruments hardware and DAQmx
◦     Knowledge of Power engineering, Volts, Amps, current, Power Factor etc.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Ability to project manage and understand how to keep on track with a Microsoft project based externally monitored project.
3.0      Qualifications & Requirements:
◦     Minimum second class higher honours degree in engineering or science related field, such as electronic engineering, physics, mechatronics or computer science.
◦     Basic Knowledge of text based programming languages.
◦     Experience in either LabVIEW, minimum of three years full time and at CLA level, or capability to reach there in a short space of time with the relevant training.
◦     Experience in a second language such as JAVA, C and C++ is strongly preferred.
◦     Have a vast experience of signal processing, both digital and analog.
◦     Although not required, but must have skills to pass the Certified LabVIEW Developer exam and CLA within the year.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Knowledge in instrumentation & control, and industrial automation, is strongly preferred.
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a positive outlook on problem solving.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full valid UK driving license.
4.0      Location:
This role is located in London, UK
5.0      Reporting:
Signal Processing Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Signal Processing Engineer in the email subject.

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

LabVIEW programmer needed for full time position, Orange County CA

Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg ‏186 KB

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

Houston LabView Programmer needed

Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227

There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time .

Error messages help need asap!!!!

hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1     PL/SQL: SQL Statement ignored
13/27     PL/SQL: ORA-00933: SQL command not properly ended

Hi,
Welcome to the forum!
Don't say things like "urgent" or "asap" (as in your title, "error messages help need asap!!!!"). It's rude.
971848 wrote:
hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1     PL/SQL: SQL Statement ignored
13/27     PL/SQL: ORA-00933: SQL command not properly endedIt looks like you're missing a semicolon at the end of line 13; that's why the statement beginning at line 8 can't be understood.
Also, you store a number in my_val, but never use that number, and you have a variable called tasktotal that's never defined. Should my_val and tasktotal be the same variable?
Perhaps this is what you want:
CREATE OR REPLACE FUNCTION
       no_of_task_types (x NUMBER)
RETURN NUMBER IS
    tasktotal   NUMBER;
BEGIN
    SELECT COUNT(distinct t.task_type_no)
    INTO    tasktotal
    FROM    employee e, assignment a, task t
    WHERE   e.employee_id = x
    AND     e.employee_no = a.employee_no
    AND     t.task_id        = a.task_id;          -- ; at end is important
    RETURN tasktotal;
END;
/This question doesn't have anything to do with SQL*Plus, so maybe the SQL*Plus forum isn't the best place for it. This is strictly a PL/SQL problem; in the future, post questions like this in the PL/SQL. The FAQ page for that forum, {message:id=9360002} , can really help you.

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

IDM SUN Engineer / Architect NEEDED asap 1st Sept start !

IDM SUN Engineer / Architect needed asap for 3 - 6 month contract possibly longer. You MUST be UK SC Security Cleared and available for a September 1st start.
Please contact me urgently on [email protected] or 0115 852 4301 - Thankyou.

are any links to access these Seminars??

LabView programmer needed to develop VIs for two immediate projects in Belmont NH, apply ASAP.

Projects are relatively small: first one is for a testing machine with data aquisition and control, second is a file storing project.

Dear Sir,
I have been working in development of various project in LabVIEW since more than 5 years. I am attaching my resume with this.
Please do send the project details and requirement, then only we can discuss about pricing and other things.
Thanks & regards,
Rajendra Gaikwad
+91 9663398272
Attachments:
Rajendra Gaikwad CV.doc ‏110 KB

HELP! I need expert advice ASAP!!!

I just formatted my Windows 7 Ultimate machine recently.In it iTunes was authorisedbut now it is askin me to authorie again. I HAVE ALREADY AUTHORISED 5 COMPUTERS AND USED DEAUTHORIZE ALL ONCE. It tells me I have to wait for a year!!! Help I'm stuck I cant sync music and vids now !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

So you deauthorized your computer already? That should have freed up 1 authorization. If nothing else, you'll need to contact Apple Support directly by phone and explain the situation to them.
http://www.apple.com/contact/
B-rock

Hi Experts need some clarity on these topics

Hi Experts,
Can anyone please guide me through the following questions
1. What is summit implementation menthodology?
2. What is the use of these different sevices?
u2013 Shared Query Engine
u2013 File Service
u2013 Authentication
3. Who will be the System Administrator( who can create App Sets)?
How many Application Administrators will be in the team (who can create Applications)?
Thanks and Regards,
Sireesha.

Hello,
The Summit implementation methodology was a methodology used by Outlooksoft to implement the product. After the acquisition of Outlooksoft by SAP and gthe subsequent rebranding of the product into BPC, SAP has integrated different sets of implementation methodologies into the SAP ASAP (Accelerated SAP) methodology, which is SAP's way of doing things. Currently, SAP Expertise centers are rolling out these methodologies into BPC projects.
Shared query engine: is the query engine BPC uses in the background to get queries and results back and from the server. Depending on the type of input the user has done/report the user need, the engine decides how to get this request handled, where to store the data and where to get the results from. The shared query engine runs on the application server.
File Service: whenever you store pre-built reports onto the server or datafiles to be used in datamanager, basically anything that involves the user, admin or system doing something with files, these files are stored in the Webfolders (altough these may be called BPC folders these days) directory and the file service hadles this traffic.
Authentication: well basically you have user authentication setup using the security setup from BPC 9in the Admin tasks). This restricts users to have access to certain tasks, entities or other secured diemnsions. So the whole security setup determines authenticication on the server to what a user is allowed to do, see, to input or to edit. Then you have also authentication in the backend (between servers). This is osmething an admin should not worry to much about as the system is supposed to handle this for you. For instance, a datamanager package authenticates itself at the SQL server to store data into its tables. So there is a system authentication service too that decides if a datamanager job is allowed to talk to this SQL server instance. But agina, these technical authnetications probalby should not worry you as an admin or superuser as the system handles those. Of course IT people might e interested to figure out what services need certain types of authentication, but in general, even they should not bother too much as this all comes with the BPC design and they cannot do a lot about it anyway, just give the correct rights to certain services (as described in the installation manual)
Finally, how many admins can there be ?
Well you will have a pute technical systems admin somewhere who handles master password and stuuf. But that person is not a BPC admin in the true sense. Again, any IT organisation has those people. From the functional side, you should of ocurse have at least one admin, but you can vary the number based on functional requirements or maybe requirements that come from a segregation of duties principle that has been determined by an audit department. In general, you will find that the audit guys want as little admins as possible, but from an operational perspective it is normal to have at least 2 or 3 people who "manage" the system form a functional perspective.
Hope this helps,
Edwin van Geel
SAP BPC EMEA

HELP NEEDED ASAP! SIMPLE ONE!

I'm a noob so please dont shout at me....!
Okay, I have a 1x1 table, and an image....i need tick boxes
and image maps ontop of this image. Now I thought I'd have to set
the image as a background image in the table, but in doing so, I
cant see a way that I can add my maps or tick boxes........and If
the image is simply placed in the table as an image, I cant add the
tickboxes, but can add the maps........what should I do??
Please can someone help asap as this is the final stage of a
stupid uni project that needs handed in in a day or so....
Thanks in advance!!
Mark

mthorpe84 wrote:
> Lol that's utter garbage. As much as I appreciate the
help from you guys n
> gals, graphic design, as a degree is the study of
design, design traits,
> publication, print, typography etc etc. Flash is as much
web work that any
> graphic design school will follow. And just for the
record, I'm at what's
> regarded as one of the top 3 design schools in the UK,
so please don't give me
> that crap.
I was at an elite university many years ago, so can
understand the
feeling of a student who "knows it all". I thought I did,
too. When I
got out into the real world, I discovered that what
university teaches
you, although valuable, means little until you have built up
practical
experience.
Perhaps your design school was trying to tell you something
when it
decided the project was to be a web page. Lesson:
understanding the
basics of the web is just as important to your craft as
print,
typography, and all the rest.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

My dashboard taking long time to load in ipad compared to Desktop. Experts need suggestion to tune my dashboard.

Hi Experts,
I have developed dashboard with BEX query as a source(9 queries used in dashboard). This dashboard opens in 40 secs in BI launchpad but if I open same dashboard through SAP BI app it almost taking 3-4 min. Is there any ways to improve performance in Ipad?
Info of Dashboard
* 20-25 components using in dashboard
* 100-150 formulae are used(VLOOKUP)
* SAP BO 4.0 SP6 I am using
Please need some tips to improve performance.
Regards
MAHANTESH

Hi MH,
Opening the dashboard in 40 secs in desktop is also a problem before jumping in to the ipad. Maximum it should take 5 - 10 secs to open the dashboard then only the clients will show interest on working with dashboards.
* 20-25 components using in dashboard
>>Check for unused components and try to remove it from the dashboard.
* 100-150 formulae are used(VLOOKUP)
>>Try to minimize the formula in excel, because the excel formula will throw lot of load at the time of processing the data. Instead of lookup's try to use index formula which is better than that.
1. Use "Refresh after components are loaded" which will make you components gets loaded first then the data comes.
2. File menu --> document properties. "Show Loading status" which explains or dashboard where it takes time to load.
Xcelsius performance optimization- tips &amp; tricks - Business Intelligence (BusinessObjects) - SCN Wiki
1430976 - BICS remote & Xcelsius performance improvements
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0ab8cce-1851-2d10-d5be-b5147a651c58?QuickLink=index&…
Hope this Helps!!!
Revert for any clarifications.
--SumanT

3D rotate tool in flash, help needed asap

Hi
I came across this site:
http://www.yofla.com/flash/3d-rotate/
And am desperate to incorporate this into some university
work asap.
What i need to know is how render the images from 3D Studio
Max so that i have the stepped images as a 360 degree slideshow so
that i can then follow the tutorial to completing the final thing,
seen as examples on the site.
Thanks

check out this tutorial
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14363
you will need to embed ion pop-up menu into another in order
to do what you describe
here is an off the shelf solution if you prefer
http://www.scriptocean.com/popmenu.html

LabView expert needed ASAP

Similar Messages

Maybe you are looking for