Labview for laptop with dock station.

I use labview on desk top computer and it works fine. But, after I use it on a laptop with dock station, it does not work. I use the exact setting and configuration and I have no idea why does not work? Any suggestion. Thanks.

There isn't any kind of information you've provided for anyone to be able to help you.
"It does not work" could mean millions of things. How is it not working?
What "exact setting and configuration" are you talking about?
Does it work when the laptop is not on the docking station?

Similar Messages

ESata for T420s with docking station

I notice the Mini Dock Plus Series 3 - 90W 433810U (as apposed to Mini Dock Series 3 - 90W 433710U) has a eSata port. Will this work with a T420s (which doesn't)?
I'm planning to buy a docking station and use it to connect my 30" 2560x1600 display using a (active) dual-link DVI adaptor but I would also like to use a eSata disk attached. This will decide if I shell out the extra $$$ for the Plus dock or the regular one.
thanks
Ash

According to http://support.lenovo.com/en_LK/product-and-parts/detail.page?&LegacyDocID=MIGR-72873, the dock is compatible with the T420s.
If it's like my 135W and 170W docks, you set the dock for the number 2 position which is less than ideal but works. eSATA off the dock should work fine.

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!
I want to get the audio out of the lightning connection (the way you get audio when you connect it to a dock). It works properly with music, but when making a telephone call, it switches to the internal speraker. You can change to the external spekers, but you cannot select another audio out. It's also possible to get the telephone audio from the analogue connection, but that's not what I want. I want telephone audio from lightning...
Would be so great if anybody has an idea

I must also say that the second update ruined my Lumia's battery life.
With the first (out-of-the-box) update the phone usually had 30 percent of battery after a quite hard day (e.g. more than an hour of talking via bluetooth handsfree, more than two hours of listening to the music via bluetooth, more than an hour of browsing via wifi, and reading hundreds of e-mails via two mail accounts). I never managed to discharge it after one day (e.g. 14-16 hours) of continous use, no matter how much I talked, listened and browsed.
Now, with the secod update, it discharges to 20% after 12 hours of laying still almost without use (30 mins of music, less than 15 mins of talking and nothing more), and discharges completely with the usage pattern described above.
Did the second update contain some Android code?

IPod will not work with docking stations

My 5th gen iPod works fine except it will not work with docking stations. I can sync it with my computer and it plays fine, just won't work with docking stations and other accessories like the Belkin FM radio converter. I bought a iMode boom box and it does not work properly with my iPod.
Any ideas??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Also:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

How can I configure labview for communication with Modbus I/O?

i read a article about configureing Labview for communication with modbus I/O in NI developer zone, but it was written for Labview 6, how can I configure it with labview 7. it seems there are some difference. Thanks!

In both LabVIEW 6 and 7, you connect to modbus using Lookout Protocol Drivers (LPD) and then communicate to LPD using the tag engine of LabVIEW DSC or through DataSocket.

Is there software for HP xb4 Docking Station, to make it work properly??

I've searched but not found any software for my xb4 Docking Station; several things not working on it, including the media bay that's supposed to accept a Personal Media Drive in its slot, but isn't recognizing it.
thanks for any help.
Rick

You do not want to use a standard 30 pin to lightning adaptor.
It would put all the weight on the lightning pin and most likely snap.
You can use one that has a cable, it would connect but have the device lay flat near the dock.
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m

Problem with laptop and docking station

Hello.
We have two laptops with two docking station. Both laptops w/ docking have the same problem:
When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
1. Product Name and Number
HP ProBook 6460b
Docking Station VB043AA
2. Operating System installed
Windows XP 32-bit
3. Error message
No error message.
4. Any changes made to your system before the issue occurred
No recent changes.
Thanks in advance.
- Betroger
This question was solved.
View Solution.

It is possible the notebook is not completing the shutdown in full when docked.
Make sure the BIOS is the most recent version.
Here is the most recent one to try should you need it.
Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Laptops in docking station with lid closed go to sleep during in-place migration from XP to Windows 7

We have an issue where existing XP laptops are targeted with SCCM 2012 OSD TS for upgrade to Windows 7. The laptops are in a docking station, with the lid closed. The laptops are going to sleep when the OSD is booted in WinPE, just before the
Setup Windows and Configmgr step. I have copied powercfg.exe from a Windows 8.1 machine (both AMD64 and x86 versions) to the MDT Tool package...." and then a step to run:
%DeployRoot%\Scripts\%PROCESSOR_ARCHITECTURE%\PowerCfg.exe -setacvalueindex 381b4222-f694-41f0-9685-ff5bb260df2e 4f971e89-eebd-4455-a8de-9e59040e7347 5ca83367-6e45-459f-a27b-476b1d01c936 0
However, the laptops are still sleeping during the Setup Windows and Configmgr step. Any insight to correcting this will be extremely helpful.

Hi
We came across this issue, seems odd that SCCM doesn't suspend the power management in the OS during the TS - (But then again it also seems odd that Windows 7 will go to sleep if you close the lid of a laptop half way through a shutdown, so that when you
lift the lid it wakes only to complete the shutdown, did MS not spot that, or choose to ignore it!?).
These commands should be run soon after the Setup Windows and ConfigMgr step and will disable the device and screen from sleep/hibernating:
Prevent sleep during OSD (Battery power)
cmd.exe /c powercfg -x -standby-timeout-dc 0
Prevent sleep during OSD (AC power)
cmd.exe /c powercfg -x -standby-timeout-ac 0
Prevent monitor off during OSD (Battery power)
cmd.exe /c powercfg -x -monitor-timeout-dc 0
Prevent monitor off during OSD (AC power)
cmd.exe /c powercfg -x -monitor-timeout-ac 0
Prevent hibernate during OSD (Battery power)
cmd.exe /c powercfg -x -hibernate-timeout-dc 0
Prevent hibernate during OSD (AC power)
cmd.exe /c powercfg -x -hibernate-timeout-ac 0
At the end of the TS, you can revert these changes by running the following command to reset the power scheme:
powercfg -restoredefaultschemes
Hope this helps
Thank you. However, we did put similar steps in our Task Sequence right after the "Setup Windows and..." step, but the issue we are having is that the "Sleep" occurs during the "Setup Windows and...." so it never reaches
anything after that step until the lid is opened.

Dual Screen ThinkPad W520 with docking station

I'm trying to use an external monitor with my docking station to extend my desktop but I can't get it to work.
I'm using the intel HD video card and I already followed thoses guide
https://wiki.archlinux.org/index.php/Intel
https://wiki.archlinux.org/index.php/Xo … ual_screen
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "old intel stuff"
Driver "intel"
Option "Shadow" "True"
Option "DRI" "false"
EndSection
/etc/modprobe.d/modprobe.conf
options i915 modeset=1
/etc/mkinitcpio.conf
MODULES="intel_agp i915"
FILES="/etc/modprobe.d/modprobe.conf
mkinitcpio -p linux
reboot
The output of xrandr -q is VGA1 disconnected even if it's plugged in the dock or the laptop itself.
Do you guys have any clues?
thanks

I'm not sure what log message I should look at. I already looked at the Xorg log
[ 184.940]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 184.941] X Protocol Version 11, Revision 0
[ 184.941] Build Operating System: Linux 3.1.5-1-ARCH x86_64
[ 184.941] Current Operating System: Linux DUDE-ARCHLINUX 3.2.1-1-ARCH #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 x86_64
[ 184.941] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/216a6a09-6be1-47c8-8147-377642302ba6 ro quiet splash
[ 184.941] Build Date: 17 December 2011 09:17:41AM
[ 184.941]
[ 184.941] Current version of pixman: 0.24.0
[ 184.941] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 184.941] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 184.942] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 24 09:14:51 2012
[ 184.951] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 184.980] (==) No Layout section. Using the first Screen section.
[ 184.980] (**) |-->Screen "Screen0" (0)
[ 184.980] (**) | |-->Monitor "Monitor0"
[ 184.980] (**) | |-->Device "Device0"
[ 184.980] (==) Automatically adding devices
[ 184.980] (==) Automatically enabling devices
[ 185.024] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 185.024] Entry deleted from font path.
[ 185.043] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 185.043] Entry deleted from font path.
[ 185.043] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 185.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 185.044] Entry deleted from font path.
[ 185.044] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 185.044] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 185.044] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 185.044] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 185.044] (II) Loader magic: 0x7ccae0
[ 185.044] (II) Module ABI versions:
[ 185.044] X.Org ANSI C Emulation: 0.4
[ 185.044] X.Org Video Driver: 11.0
[ 185.044] X.Org XInput driver : 13.0
[ 185.044] X.Org Server Extension : 6.0
[ 185.046] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21d1 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 185.046] (--) PCI: (0:1:0:0) 10de:0dfa:17aa:21d1 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 185.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 185.046] (II) LoadModule: "extmod"
[ 185.075] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 185.089] (II) Module extmod: vendor="X.Org Foundation"
[ 185.089] compiled for 1.11.3, module version = 1.0.0
[ 185.089] Module class: X.Org Server Extension
[ 185.089] ABI class: X.Org Server Extension, version 6.0
[ 185.089] (II) Loading extension MIT-SCREEN-SAVER
[ 185.089] (II) Loading extension XFree86-VidModeExtension
[ 185.089] (II) Loading extension XFree86-DGA
[ 185.089] (II) Loading extension DPMS
[ 185.089] (II) Loading extension XVideo
[ 185.089] (II) Loading extension XVideo-MotionCompensation
[ 185.089] (II) Loading extension X-Resource
[ 185.089] (II) LoadModule: "dbe"
[ 185.089] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 185.090] (II) Module dbe: vendor="X.Org Foundation"
[ 185.090] compiled for 1.11.3, module version = 1.0.0
[ 185.090] Module class: X.Org Server Extension
[ 185.090] ABI class: X.Org Server Extension, version 6.0
[ 185.090] (II) Loading extension DOUBLE-BUFFER
[ 185.090] (II) LoadModule: "glx"
[ 185.090] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 185.104] (II) Module glx: vendor="X.Org Foundation"
[ 185.105] compiled for 1.11.3, module version = 1.0.0
[ 185.105] ABI class: X.Org Server Extension, version 6.0
[ 185.105] (==) AIGLX enabled
[ 185.105] (II) Loading extension GLX
[ 185.105] (II) LoadModule: "record"
[ 185.105] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 185.106] (II) Module record: vendor="X.Org Foundation"
[ 185.106] compiled for 1.11.3, module version = 1.13.0
[ 185.106] Module class: X.Org Server Extension
[ 185.106] ABI class: X.Org Server Extension, version 6.0
[ 185.106] (II) Loading extension RECORD
[ 185.106] (II) LoadModule: "dri"
[ 185.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 185.117] (II) Module dri: vendor="X.Org Foundation"
[ 185.117] compiled for 1.11.3, module version = 1.0.0
[ 185.117] ABI class: X.Org Server Extension, version 6.0
[ 185.117] (II) Loading extension XFree86-DRI
[ 185.117] (II) LoadModule: "dri2"
[ 185.118] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 185.118] (II) Module dri2: vendor="X.Org Foundation"
[ 185.118] compiled for 1.11.3, module version = 1.2.0
[ 185.118] ABI class: X.Org Server Extension, version 6.0
[ 185.118] (II) Loading extension DRI2
[ 185.118] (II) LoadModule: "intel"
[ 185.119] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 185.135] (II) Module intel: vendor="X.Org Foundation"
[ 185.135] compiled for 1.11.2, module version = 2.17.0
[ 185.135] Module class: X.Org Video Driver
[ 185.135] ABI class: X.Org Video Driver, version 11.0
[ 185.135] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 185.136] (--) using VT number 7
[ 185.148] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 185.148] drmOpenDevice: node name is /dev/dri/card0
[ 185.148] drmOpenDevice: open result is 8, (OK)
[ 185.148] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 185.148] drmOpenDevice: node name is /dev/dri/card0
[ 185.148] drmOpenDevice: open result is 8, (OK)
[ 185.148] drmOpenByBusid: drmOpenMinor returns 8
[ 185.148] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 185.148] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 185.148] (==) intel(0): RGB weight 888
[ 185.148] (==) intel(0): Default visual is TrueColor
[ 185.148] (**) intel(0): Option "DRI" "false"
[ 185.148] (**) intel(0): Option "Shadow" "True"
[ 185.148] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 185.148] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 185.149] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration disabled.
[ 185.149] (**) intel(0): Relaxed fencing enabled
[ 185.149] (**) intel(0): Wait on SwapBuffers? enabled
[ 185.149] (**) intel(0): Triple buffering? enabled
[ 185.149] (**) intel(0): Framebuffer tiled
[ 185.149] (**) intel(0): Pixmaps tiled
[ 185.149] (**) intel(0): 3D buffers tiled
[ 185.149] (**) intel(0): SwapBuffers wait enabled
[ 185.149] (==) intel(0): video overlay key set to 0x101fe
[ 185.149] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 185.149] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 185.149] (II) intel(0): Output VGA1 has no monitor section
[ 185.150] (II) intel(0): EDID for output LVDS1
[ 185.150] (II) intel(0): Manufacturer: LEN Model: 40b1 Serial#: 0
[ 185.150] (II) intel(0): Year: 2009 Week: 0
[ 185.150] (II) intel(0): EDID Version: 1.3
[ 185.150] (II) intel(0): Digital Display Input
[ 185.150] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 185.150] (II) intel(0): Gamma: 2.20
[ 185.150] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 185.150] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 185.150] (II) intel(0): First detailed timing is preferred mode
[ 185.150] (II) intel(0): redX: 0.610 redY: 0.348 greenX: 0.316 greenY: 0.589
[ 185.150] (II) intel(0): blueX: 0.151 blueY: 0.066 whiteX: 0.313 whiteY: 0.329
[ 185.150] (II) intel(0): Manufacturer's mask: 0
[ 185.150] (II) intel(0): Supported detailed timing:
[ 185.150] (II) intel(0): clock: 108.5 MHz Image Size: 345 x 194 mm
[ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 185.150] (II) intel(0): Supported detailed timing:
[ 185.150] (II) intel(0): clock: 90.4 MHz Image Size: 345 x 194 mm
[ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
[ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
[ 185.150] (II) intel(0): Unknown vendor-specific block f
[ 185.150] (II) intel(0): LP156WD1-TLB2
[ 185.150] (II) intel(0): EDID (in hex):
[ 185.150] (II) intel(0): 00ffffffffffff0030aeb14000000000
[ 185.150] (II) intel(0): 0013010380231378ea43c59c59519626
[ 185.150] (II) intel(0): 11505400000001010101010101010101
[ 185.150] (II) intel(0): 010101010101622a404061842a303020
[ 185.150] (II) intel(0): 350059c2100000195323404061842a30
[ 185.150] (II) intel(0): 3020350059c2100000190000000f00a9
[ 185.150] (II) intel(0): 0932a9092816090030e40002000000fe
[ 185.150] (II) intel(0): 004c503135365744312d544c423200e2
[ 185.150] (II) intel(0): EDID vendor "LEN", prod id 16561
[ 185.151] (II) intel(0): Printing DDC gathered Modelines:
[ 185.151] (II) intel(0): Modeline "1600x900"x0.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
[ 185.151] (II) intel(0): Modeline "1600x900"x0.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
[ 185.151] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 185.151] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 185.151] (II) intel(0): Printing probed modes for output LVDS1
[ 185.151] (II) intel(0): Modeline "1600x900"x60.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
[ 185.151] (II) intel(0): Modeline "1600x900"x50.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
[ 185.151] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 185.151] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 185.151] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 185.151] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 185.151] (II) intel(0): EDID for output VGA1
[ 185.151] (II) intel(0): Output LVDS1 connected
[ 185.151] (II) intel(0): Output VGA1 disconnected
[ 185.151] (II) intel(0): Using exact sizes for initial modes
[ 185.151] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 185.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 185.152] (II) intel(0): Kernel page flipping support detected, enabling
[ 185.152] (**) intel(0): Display dimensions: (448, 254) mm
[ 185.152] (WW) intel(0): Probed monitor is 350x190 mm, using Displaysize 448x254 mm
[ 185.152] (**) intel(0): DPI set to (90, 90)
[ 185.152] (II) Loading sub module "fb"
[ 185.152] (II) LoadModule: "fb"
[ 185.152] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 185.153] (II) Module fb: vendor="X.Org Foundation"
[ 185.153] compiled for 1.11.3, module version = 1.0.0
[ 185.153] ABI class: X.Org ANSI C Emulation, version 0.4
[ 185.153] (==) Depth 24 pixmap format is 32 bpp
[ 185.153] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 185.157] (II) UXA(0): Driver registered support for the following operations:
[ 185.157] (II) solid
[ 185.157] (II) copy
[ 185.157] (II) composite (RENDER acceleration)
[ 185.157] (II) put_image
[ 185.157] (II) get_image
[ 185.157] (==) intel(0): Backing store disabled
[ 185.157] (==) intel(0): Silken mouse enabled
[ 185.157] (II) intel(0): Initializing HW Cursor
[ 185.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 185.227] (==) intel(0): DPMS enabled
[ 185.227] (==) intel(0): Intel XvMC decoder enabled
[ 185.227] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[ 185.227] (II) intel(0): direct rendering: Disabled
[ 185.227] (==) intel(0): hotplug detection: "enabled"
[ 185.227] (--) RandR disabled
[ 185.227] (II) Initializing built-in extension Generic Event Extension
[ 185.227] (II) Initializing built-in extension SHAPE
[ 185.227] (II) Initializing built-in extension MIT-SHM
[ 185.227] (II) Initializing built-in extension XInputExtension
[ 185.227] (II) Initializing built-in extension XTEST
[ 185.227] (II) Initializing built-in extension BIG-REQUESTS
[ 185.227] (II) Initializing built-in extension SYNC
[ 185.227] (II) Initializing built-in extension XKEYBOARD
[ 185.227] (II) Initializing built-in extension XC-MISC
[ 185.227] (II) Initializing built-in extension SECURITY
[ 185.227] (II) Initializing built-in extension XINERAMA
[ 185.227] (II) Initializing built-in extension XFIXES
[ 185.227] (II) Initializing built-in extension RENDER
[ 185.227] (II) Initializing built-in extension RANDR
[ 185.227] (II) Initializing built-in extension COMPOSITE
[ 185.227] (II) Initializing built-in extension DAMAGE
[ 185.254] (II) AIGLX: Screen 0 is not DRI2 capable
[ 185.254] (II) AIGLX: Screen 0 is not DRI capable
[ 185.582] (II) AIGLX: Loaded and initialized swrast
[ 185.582] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 185.583] (II) intel(0): Setting screen physical size to 448 x 254
[ 185.918] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 185.918] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 185.918] (**) Power Button: Applying InputClass "keyboard-layout"
[ 185.918] (II) LoadModule: "evdev"
[ 185.919] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.932] (II) Module evdev: vendor="X.Org Foundation"
[ 185.932] compiled for 1.10.99.902, module version = 2.6.0
[ 185.932] Module class: X.Org XInput Driver
[ 185.932] ABI class: X.Org XInput driver, version 13.0
[ 185.932] (II) Using input driver 'evdev' for 'Power Button'
[ 185.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.933] (**) Power Button: always reports core events
[ 185.933] (**) Power Button: Device: "/dev/input/event3"
[ 185.933] (--) Power Button: Found keys
[ 185.933] (II) Power Button: Configuring as keyboard
[ 185.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 185.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 185.933] (**) Option "xkb_rules" "evdev"
[ 185.933] (**) Option "xkb_model" "evdev"
[ 185.933] (**) Option "xkb_layout" "us, ca"
[ 185.933] (**) Option "xkb_options" "grp:caps_toggle"
[ 185.997] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 185.997] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 185.997] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 185.997] (II) Using input driver 'evdev' for 'Video Bus'
[ 185.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.997] (**) Video Bus: always reports core events
[ 185.997] (**) Video Bus: Device: "/dev/input/event4"
[ 185.997] (--) Video Bus: Found keys
[ 185.997] (II) Video Bus: Configuring as keyboard
[ 185.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 185.997] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 185.997] (**) Option "xkb_rules" "evdev"
[ 185.997] (**) Option "xkb_model" "evdev"
[ 185.997] (**) Option "xkb_layout" "us, ca"
[ 185.997] (**) Option "xkb_options" "grp:caps_toggle"
[ 185.999] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 185.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 185.999] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 185.999] (II) Using input driver 'evdev' for 'Video Bus'
[ 185.999] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 185.999] (**) Video Bus: always reports core events
[ 185.999] (**) Video Bus: Device: "/dev/input/event5"
[ 185.999] (--) Video Bus: Found keys
[ 185.999] (II) Video Bus: Configuring as keyboard
[ 185.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5/event5"
[ 185.999] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 185.999] (**) Option "xkb_rules" "evdev"
[ 185.999] (**) Option "xkb_model" "evdev"
[ 185.999] (**) Option "xkb_layout" "us, ca"
[ 185.999] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 186.000] (II) No input driver/identifier specified (ignoring)
[ 186.001] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 186.001] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 186.001] (**) Sleep Button: Applying InputClass "keyboard-layout"
[ 186.001] (II) Using input driver 'evdev' for 'Sleep Button'
[ 186.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.001] (**) Sleep Button: always reports core events
[ 186.001] (**) Sleep Button: Device: "/dev/input/event2"
[ 186.001] (--) Sleep Button: Found keys
[ 186.001] (II) Sleep Button: Configuring as keyboard
[ 186.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 186.001] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 186.001] (**) Option "xkb_rules" "evdev"
[ 186.001] (**) Option "xkb_model" "evdev"
[ 186.001] (**) Option "xkb_layout" "us, ca"
[ 186.001] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.002] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 186.002] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 186.002] (**) Integrated Camera: Applying InputClass "keyboard-layout"
[ 186.002] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 186.002] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.002] (**) Integrated Camera: always reports core events
[ 186.002] (**) Integrated Camera: Device: "/dev/input/event8"
[ 186.003] (--) Integrated Camera: Found keys
[ 186.003] (II) Integrated Camera: Configuring as keyboard
[ 186.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event8"
[ 186.003] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 186.003] (**) Option "xkb_rules" "evdev"
[ 186.003] (**) Option "xkb_model" "evdev"
[ 186.003] (**) Option "xkb_layout" "us, ca"
[ 186.003] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.004] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 186.004] (II) No input driver/identifier specified (ignoring)
[ 186.004] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
[ 186.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 186.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.005] (**) AT Translated Set 2 keyboard: always reports core events
[ 186.005] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 186.005] (--) AT Translated Set 2 keyboard: Found keys
[ 186.005] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 186.005] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 186.005] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 186.005] (**) Option "xkb_rules" "evdev"
[ 186.005] (**) Option "xkb_model" "evdev"
[ 186.005] (**) Option "xkb_layout" "us, ca"
[ 186.005] (**) Option "xkb_options" "grp:caps_toggle"
[ 186.006] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 186.006] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 186.006] (II) LoadModule: "synaptics"
[ 186.006] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 186.016] (II) Module synaptics: vendor="X.Org Foundation"
[ 186.016] compiled for 1.11.0, module version = 1.5.0
[ 186.016] Module class: X.Org XInput Driver
[ 186.016] ABI class: X.Org XInput driver, version 13.0
[ 186.016] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 186.016] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 186.016] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 186.016] (**) Option "Device" "/dev/input/event9"
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 186.346] (**) Option "TapButton1" "1"
[ 186.346] (**) Option "TapButton2" "2"
[ 186.347] (**) Option "TapButton3" "3"
[ 186.453] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 186.453] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 186.560] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 186.560] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 186.560] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 186.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 186.561] (II) No input driver/identifier specified (ignoring)
[ 186.562] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 186.562] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 186.562] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 186.562] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.562] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 186.562] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 186.562] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 186.562] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 186.562] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 186.562] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 186.562] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
[ 186.562] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 186.562] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 186.562] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 186.563] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 186.563] (II) No input driver/identifier specified (ignoring)
[ 186.564] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-layout"
[ 186.564] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 186.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 186.564] (**) ThinkPad Extra Buttons: always reports core events
[ 186.564] (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 186.564] (--) ThinkPad Extra Buttons: Found keys
[ 186.564] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 186.564] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[ 186.564] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 186.564] (**) Option "xkb_rules" "evdev"
[ 186.564] (**) Option "xkb_model" "evdev"
[ 186.565] (**) Option "xkb_layout" "us, ca"
[ 186.565] (**) Option "xkb_options" "grp:caps_toggle"
Last edited by mtetreault (2012-01-24 14:17:56)

X201 with Docking station not able to connect to Samsung Monitor

When the Samsung (SyncMaster 2053BW) VGA connect directly to X201, the monitor works fine. When the Samsung VGA connect thru docking, Monitor is blank. Why?

hey alin0902,
hard to say why. have you tested the Samsung with another laptop that has a docking station ? does it work? or does it work only if the Samsung is connected directly into the other laptop ?
if it does not work with a different laptop that is docked, we suggest contacting Samsung for assistance.
if it does work, while being docked.. what you could do is to uninstall the current video driver of your X201. let windows install its own generic driver.
once done, dock the unit and try again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

T42 non-communication with docking station type 74P6733

When I fit my T42 laptop on to the docking station, the symbol at lower right of screen shows the battery symbol. Presumably something is wrong with the connection between the two. How can I find out if it's the laptop or the docking station, and is their a solution? Please help.

I wonder if anyone reading this lives in Somerset UK, so that I could try this out! It's so irritating - I'm sure it's just the link between the two units. When I was first given it, the link would break periodically until I discovered that setting the docking station on a thin paperback book did the trick. I guess something has just bent, or similar.
I was able to link my Passap knitting machine to DesignaKnit software on the laptop through the docking station for downloading stitch patterns and interactive knitting to the machine. However, the laptop doesn't have a matching connection, so my husband bought a cable with USB connection. The designers of the knitting software say this should work, but the screen is saying that the cable isn't plugged into COM1. Anyone able to help with this please?

Still annoying stuck at 0.8Ghz with docking station

if I put my W520 in sleep modus, put in my docking station and start it, it's still stuck at 0,8Ghz! Even throttlestop wont work here!!
taking it off and on the docking station while running makes no difference. oh wrong, there is a difference: as long it is OFF the docking station on battery only, I can get full speed with turbo boost through throttle stop, but beware if I put it on the docking station again ....
only thing I can do is restart the laptop, then I get the message: the wattage of the power adapter is too low compared to the one the system was shipeed with (I HAVE the original 170W power adapter on my docking station!!), and then it starts with TB working fine.
will these issues ever have an end, lenovo?
Solved!
Go to Solution.

Thanks for information. The new BIOS totally skipped my attention.
I had power manager unsinstalles and the 1.26 Bios. with the new 1.30, the problem seems to be solved, at least this time.
Great!

Access Connections - disable WiFi on Wired Connect with docking station

Issue: Need to auto switch without user interaction from Wired to WiFi and back to Wired.
Example - User leaves desk/docking station with wired LAN to a meeting on WiFi then returns to their desk/dock. Laptop may hit sleep mode on these steps as well.
I'm moving from Dell to Lenovo and new to AC - so far no luck disabling WiFi on Wired connect. It's a breeze with Intel PROset + "adapter switching" and can be done manually with Dell Wifi drivers ("disable on Wired Connect"). I assumed Thinkvantage Access Conentions would actually be more robust than these. Should we just use PROset even though it doesn;t ship with the systems nor is a download for Lenovo T-Series? PROset method - http://www.intel.com/support/wireless/wlan/sb/CS-028815.htm
Working to achieve this as a managed policy for many computers. AC looks great but wish it had this setting like Intel PROset!!!
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

Hi Tpad-rex, welcome to the forums,
Please take a look at the profile settings in access connections. (Select the profile and choose edit profile). In the profile you should have two adapters showing; LAN and WLAN, make sure that the LAN is above the WLAN in the priority list. I'm guessing you have it the other way around, did you maybe set it up as a WLAN connection first??
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HP laptops with dock

Do you know which HP laptops are available with a docking station (i.e. once set, they can be displayed on a separate monitor and are plugged into a new keyboard + mouse)? Thank you!

Hi 241R ,
Here is a link to probook 6470b which has a serial port -http://www8.hp.com/h20195/v2/getpdf.aspx/c04296097.pdf?ver=4
Hope it helps
Regards,
PraTH_KR
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

W520 only charges with docking station wall plug does not work

I have experienced this problem twice and am very confused about why it is occuring.
I usually use my W520 laptop on a docking station and when I am at home or travelling I keep it powered by with a wall adapter. So at work it stays charged and operating from the docking station (i.e. ports on the bottom of the laptop). When I am at home it stays charged by pulling it in using the Lenovo (170W power adapter).
Last year I was in China working and all of a sudden my laptop would no longer charge and would shutdown when the battery died) with the wall adapter. I ended up buying a docking station and managed to keep it charged and operating that way. Obtaining any type of warranty service in China was a major pain but the problem was diagnosed to be an issue with my motherboard. I returned to Canada and had my computer replaced (computer was about 3 months old).
Now I am back in Canada and have the same problem with my new replacement laptop. I am puzzled why this keeps happening. Has this occured with anyone else? Is the plug on the W520 not very good quality? Any thoughts or suggestions will be super appreciated.

Thanks for the reply. Actually everyone always thinks it is a problem with the power adapter cable but the cable I am using is the same one for my dock. I only had one cable for my dock and when I am travelling unpug it and use it when I am on the road.
Last time in China they took apart my computer and confirmed (I was watching them as they used the voltmeter) that power and proper voltgage was coming into my computer from the plug and all the way to the board (ie checking every interface along the way). Yet it was not charging the battery or providing power to run the computer. The only way to solv the problem was to use a dock. Only thing I could think of is that maybe something on the bottomdock connector is messed up and hence the computer believes it is connected to the dock and hence not wanting to provide power via the power adapter at the same time to avoid shorting out the board. Any thoughts?

Labview for laptop with dock station.

Similar Messages

Maybe you are looking for