LabVIEW Freelancer - Programmer/Tutor - Singapore based - CLA

Hello * ,
Open for short/long term LabVIEW project.
Familiar with NI PXI (Digital/Analog/Serial IO/PMU etc). PXI modules analysis and comparison based on project requirement .
Familiar with NI LabVIEW & MS Visual Studio.NET programming.
Available as a freelancer.
Singapore based.
For any query please feel free to contact me at drawsomecode (at) gmail.com
With project requirement in mind/paper will be great.
Thanks for reading this post.
Regards,
Drawsome

Hi,
Students are welcome to email me at [email protected] for help or enquiry on LabVIEW tutor / FYP oriented tutoring / FYP project.
Drawsome

Similar Messages

LabVIEW/Labwindows CVI Freelancer - Programmer/Tutor - Chennai based - CLAD

LabVIEW/Labwindows CVI Freelancer - Programmer/Tutor - Chennai based - CLAD
Hi,
Open for short/long term LabVIEW/Labwindows CVI project.
Familiar with NI PXI (Digital/Analog/Serial IO/PMU etc). PXI modules analysis and comparison based on project requirement .
Familiar with NI LabVIEW Labwindows CVI & MS Visual Studio.NET programming.
Available as a freelancer.
Chennai based.
For any query please feel free to contact me at [email protected]
With project requirement in mind/paper will be great.
Thanks for reading this post.
Regards,
Sithick H

LabVIEW Software Programmer and Project Lead in Overland Park, KS

JET Engineering Inc. is a System Integrator for test measurement and control. Corporate office located in Cedar Rapids, IA with branches in KS, MO, NE. Looking to expand into the Overland Park, KS area. ISO 9001:2008 certified.
Job Summary:
Customer on-site LabVIEW programmer on various projects. Responsible for assembling project requirements, accepting assigned responsibilities, working with other JET team members, and maintaining schedule to ensure timely completion of project. Must manage project scope, cost, schedule, and risk to achieve project objectives. Effectively coordinate and manage activities with other JET and customer team members. Track and communicate status of projects.
Job Responsibilities:
Designing and implementing LabVIEW solutions for customers with guidance from JET LabVIEW Architects
Understanding of National Instruments (NI) hardware capabilities integrate them into customer solutions
Troubleshooting hardware, wiring, and interfaces
Planning and Executing comprehensive software validation tests
Understanding and/or discovering how software, hardware and customer systems interact
Receiving and following general instructions on routine work, detailed instructions on new projects or assignments; work will be reviewed for soundness of judgment and overall adequacy and accuracy.
Building productive working relationships internally and externally.
Frequent internal company and external status reporting.
Developing solutions to a variety of problems of moderate scope and complexity.
Referring to policies and practices for guidance.
Working on problems of moderate scope where an analysis of situations or data requires a review of a variety of factors.
Exercising judgment within defined procedures and practices to determine appropriate action.
Contributing to the completion of organizational projects and goals.
Frequent use of general / technical knowledge and industry/functional practices, techniques, and standards.
General application of sound engineering process concepts and principles.
Developing professional expertise.
Job Skills:
Certified LabVIEW Developer level programing skills
Working knowledge of most NI hardware platforms
Prefer experience with NI TestStand
Prefer experience with NI VeriStand
Prefer experience with LabVIEW classes and object oriented programming
Job Attributes:
Analysis – understands elementary problem- solving techniques.
Cooperation – understands the value of cooperating with co-workers.
Coordinating – understands how to disseminate internal information.
Innovation – recognizes the benefits of change and experimentation.
Judgment –base decisions on factual information and sound logic.
Relationships –compassionate and empathetic when dealing with the problems of others.
Minimum Requirements:
Bachelor’s degree in appropriate discipline, or in the absence of a bachelor’s degree, six years of related experience, or NI CLD certification with demonstrated project experience.
Compensations:
Depends on Experience Level

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

Solar Company looking for Labview Freelancer in Southern Germany

Hi!
For the Data Analysis and Modeling Team of Soitec Solar I am looking for a Labview Freelancer. Soitec Solar is located in Southern Germany in "Freiburg im Breisgau", close to Switzerland and France. Soitec Solar is a manufacturer of photovoltaic systems for industrial markets.
We offer some compact but interesting projects dealing with the acquisition of data generated by meteorological sensors and IV curve tracers for photovoltaic modules. The duration of these projects ranges from a few weeks to some months.
Telecommuting is generally possible, but applicants should be located within ~150km distance as at least two face-to-face meetings per project are required.
If you are interested, please contact me and attach a short description of Labview projects you have realized in the past:
Tobias Gerstmaier, e-mail: [email protected], office phone: +49 761 214 108 42
Best regards,
Tobias Gerstmaier

I'm located just on the swiss side of the swiss-german border (approx. 50km away).
I've done several freelance projects in the past on Spectrometer software and wafer-based quality control automation.
I'll send you an email shortly if you are still looking for someone.
Shane O'Neill
Say hello to my little friend.
RFC 2323 FHE-Compliant

LabView Software Programmer Job Opening - Seattle

LabView Software Programmer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Software Programmer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Software Programmer include:
Work with current team members with varying levels of LabView to restructure existing crash test software and to do so in such a manner as to ensure each are able understand and work with code.
Supports all aspects of software application design, development, testing, deployment, and support.
Analyze the current and future needs of the software in order to properly select the type of architecture and structure best suited for the new application.
Perform software testing at a unit and integration level to ensure expected behavior.
Comments code clearly and consistently throughout the development process.
Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
Troubleshoot and repair any functional software bugs that may arise.
Investigate opportunities for system improvement through new software approaches.
Furthermore, the ideal candidate would possess the following skills:
Expert knowledge of LabVIEW.
Passing understanding of industrial controls.
Familiarity with a minimum one low-level programming language (C, C#, VB, Ladder, etc)
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated feedback control systems.
Experience with LabVIEW RTOS and PC Real Time Computers
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Porsche ServoSled facility near Stutgart Germany

Job is open again, see updated description here.
Please note at this time we are NOT accepting applications from outside the US.

LabVIEW Freelance Developer

LabVIEW
Freelance Developer.
I am a
Telecommunication Engineer with 2.5 years of experience with LabVIEW and Ni
Products. Actually I am living in Spain, but flying to other places
is “No problem”.
I’ve done
the following certifications and courses:
Certifications:
CPI (Certified Professional
Instructor)
CLD (Certified LabVIEW
Developer)
CLAD (Certified LabVIEW
Associate Developer)
Courses:
LabVIEW Advanced I
LabVIEW Intermidiate I and II
LabVIEW Basics I and II
CompactRIO and LabVIEW
Development course
I am
considered a LabVIEW expert because:
I can make real readable,
scalable, documented and maintainable applications in LabVIEW.
Guarantee time of project to be
delivered with no risks (TimeToMarket!!).
Make proyects covering all
proyect phases, since Specifications, Design, Implementation, Documentation,
up to delivering the proyect.
If
interested on meeting me please email me at: [email protected] or can call
me at 0034 636189886.

A little more info about me. In addition to labview experience I have a PhD in chemical physics and 6 years postdoctoral experience in the field of optical spectroscopy, manipulation and diagnostics. I have built and designed many research experiments including and incorporating labview control, acquisition and analysis software. These have included ultra sensitive absorption and Raman spectroscopy instruments and advanced optical tweezer systems to simple undergraduate practical experiments and associated software.

Research Design Engineer - LabVIEW/MATLAB Programmer -Boston, Massachusetts

Research Design Engineer - LabVIEW/MATLAB Programmer
The Eaton-Peabody Laboratory seeks an experienced programmer to design and write LabVIEW and MATLAB software to control stimulus generation, data acquisition and response analysis for a range of cutting-edge biomedical research projects. The successful candidate will join an existing team of hardware and software engineers within a multidisciplinary research laboratory, located at the Massachusetts Eye and Ear Infirmary, comprising 21 NIH-funded investigators studying a variety of aspects of hearing and deafness. To see current research projects here at the Eaton-Peabody Laboratory, go to our website: http://www.masseyeandear.org/research/ent/eaton-peabody/.
Minimum Qualifications:
BA/BS in Math, Computer Science or equivalent
demonstrated expertise in MATLAB, LabVIEW or C++
demonstrated ability to work and communicate effectively with technical and non-technical colleagues
Additional Qualifications:
experience with software control of digital and analog I/O boards
experience with scientific programming
Send a cover letter, resume, salary requirements and contact information for three references to:
[email protected]

Labview Programmer

LabVIEW Tutor for FYP - Singapore based

Hi,
Students are welcome to send an email to [email protected] for help or enquiry on LabVIEW tutor / FYP oriented tutoring / FYP project.
Background: >5 years in coaching & helping students to start the project right, and accomplished goal with the right skill.
Thanks,
Drawsome

It does not look lile you are seeking employment, thus your post is off-topic here.
LabVIEW Champion . Do more with less code and in less time .

LabVIEW Application Developer (CLA) - Provide LabVIEW solution for SME & MNC - Singapore based

Hi ,
I have accumulated years of experience in creating LabVIEW application for SME & MNC.
In order to deliver quality solution to customer, please expect the following routine:
Requirement gathering on software application.
Translate business requirement into software specification, software model and architecture.
Application coding and regular review with client.
Continuously application improvement and maintenance based on user feedback.
Part of my experiences:
LabVIEW application development with rich-GUI features.
Process automation or data analysis through communication (Express Controller/Serial/USB/Bluetooth etc.) in between customized hardwares and LabVIEW application.
High pincount Digital data generation & acquisition.
Provide best-fit NI PXI hardwares (Digital/Analog/Serial IO/PMU etc) for customer's business requirement.
Visual Studio.NET programming, SQL, Scripting.
LabVIEW Real-time, LabVIEW FPGA
Please feel free to drop me an email at [email protected] for a non-obligatory discussion.
Thanks for reading.
Regards,
Drawsome

Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

UK Based CLA/CLED/CPI freelancer actively seeking new challenge

Hi,
I am a UK based LabVIEW architect (also qualified as CLED and CPI) and am on the lookout for LabVIEW/systems engineering type work. My formal education consists of bachelors and masters in Electronic Engineering.
My professional experience includes significant exposure to virtually the entire LabVIEW stack (PC/RT/FPGA) and I have done work in a diverse range of industries including Formula 1, Telecommunications and Aerospace.
If you are in need of a skilled LabVIEW architect, for any size project, please do not hesitate to contact me via this forum.
My CV is available on request.
nrp
CLA

CLD or CLA LabVIEW developer required by UK based Select Alliance Partner

Cal-Bay Systems in the UK are looking for talented LabVIEW developers to join our team. Must be qualified to at least CLD level with experience in test including a good understanding of sensors and signal conditioning techniques. SQL, .NET and sharepoint experience will also be advantageous. Contact [email protected]
Office based in Swindon but working from home may be an option.

Dear Sir/Madam,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my C.V. attached and contact me at your most convenient.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx ‏24 KB

Looking for labview programmer in singapore (project)

Hi
I am looking for some experienced freelace programmer that can help me in my school project.
The objective is to design a vi that help to caluclate angular gyro rate for a gyro test using Gyr lisy300al.
Any help will be appreciated.
thank you

Please post your question to [email protected]

DeTect, Inc., Longmont, CO. LabVIEW / C programmer position

Hello,
Below and attached is a open job position for our Longmont, Colorado office.
Regards,
Scott
LabVIEW® and C Programmer for Radar Applications
DeTect, Inc. is a provider of radar systems for meteorological applications and bird detection. The Meteorological Systems Division in Longmont, Colorado designs and manufactures radar wind profiling systems for use throughout the world. The Meteorological Systems Division has an opening for a full-time, in-house LabVIEW and C programmer to maintain and improve current code, and develop new code for instrument control, data acquisition, signal processing, database management, and remote control and display.
General Description
Program using LabVIEW and C to maintain (debug, modify) code for radar wind profilers
Use software design principals, software configuration management practices, software documentation, and signal processing knowledge to design and develop new code for radar wind profiler products
Work independently and with project team members to maintain and develop radar wind profiler software and related documentation
Confer with technical specialists and engineers to identify, develop, prototype, document, and deploy operational software for radar systems and components
Collaborate with technical specialists and engineers using RF/microwave and other electronics test equipment to integrate and test application software with hardware
Opportunity for advancement and upward career mobility
Required Experience
5+ years LabVIEW programming in practical applications
3+ years C programming in practical applications
Interfacing LabVIEW with instrumentation
Practical applications in manufacturing environment
Use of source code control
Database use and management
Software documentation
Formal testing of application software
Hardware interfacing with software
Signal processing fundamentals or direct experience
GUI development
Required Skills
Ability to understand and analyze complex software systems such as that used for real-time control of instrumentation like a radar system
Familiarity with best practices in LabVIEW and C software development
Ability to design and create moderately complex LabVIEW and C applications
Understanding of state machines and advanced user interface techniques
Self-starter comfortable working in small entrepreneurial environment with diverse team of engineers, technicians, manufacturing experts, and scientists
Ability to work with Linux and Windows operating systems
Desired Experience and Skills
Familiarity with LabVIEW Realtime FPGA
Experience in meteorology
Experience with radar systems
Experience with Microsoft Office, SVN
Ability to travel domestically and internationally
Certified LabVIEW Developer
Education
B.S. in Electrical Engineering and/or Computer Science (or related discipline) preferred.
Location:                                Longmont, Colorado
Employee Type:                      Full-time, but contract may be acceptable
Relocation Covered:             Negotiable
Contact:                                 [email protected]    (no calls please)
Website:                                www.detect-inc.com
File: 2012-08_LabVIEW-C_programmer_ad_v06.docx
Attachments:
2012-12_LabVIEW-C_programmer_ad_v06.pdf ‏131 KB

Dear Mr.Scott
I am a Master’s graduate in Electrical Engineering and I am glad to inform you that I posses 8+ years of constant exposure to LabVIEW and TestStand and I am Certified LabVIEW Associate Developer (CLAD). I am writing to see if this position is still available. I am working on H1B and I would like to know, if the H1B candidate will be considered for this position. Thanking you,

What is required to receive iBook/app payments to a Singapore based publisher?

I'm a sole trader based in Singapore.
I'm looking to publish iBooks and Apps.
What are all the legal requirements of me to do that and receive payments to my Singapore personal bank account?
thanks

From Apple about book covers:
JPEG with “.jpg” extension (quality unconstrained) or PNG with “.png” extension
RGB (screen standard)
600 pixels minimum along the larger axis. For an average trade paperback, this could be 400x600minimum size, as the books are generally taller than they are wide.
Covers may not reference pricing, the physical edition, or include any other wording that may notnecessarily be true for the digital edition.
Yes, a separate cover file is needed for display. My experience is if you have a cover for Amazon that is 600 px or greater on the longest side, you are fine with Apple.
Step back and take a breath. We all go through this the first time.
- Fabe

Contract work for a LabVIEW/FPGA programmer in Cambridge/Boston MA

Hello,
we are looking for an experienced LabVIEW programmer who has experience in FPGA programming to do some contract work on improving our current software.
If you are interested, please email me ([email protected]) to discuss further.
Best wishes,
Marcel

Srinkoo:
Please reply with a brief description of your credentials and availability.
My email is [email protected]

LabVIEW Freelancer - Programmer/Tutor - Singapore based - CLA

Similar Messages

Maybe you are looking for