LabVIEW Internal SCC broken & files are locked

I'm working with LabVIEW 6.0.2, using the Internal SCC System. I've lost my SCC storage and I'm not likely to recover it. I've got local copies, but they have been locked by the SCC system. I am searching my archives for unlocked versions.
The question: Is there any way to unlock the vis without the SCC system?
Certified LabVIEW Developer

To unlock a VI manually you go in VI Properties>Security and check "Unlocked". If you have a lot of VIs, make an utility that scan all VIs in memory (load your project in memory) and use the VI Server method "Set Lock State" to uinlock the VI.
You may also need to remove the "Read-Only" VI files attribute.
LabVIEW, C'est LabVIEW

Similar Messages

All files are locked, a new entry in permissions and more

Following instructions from here on how to try to correct another issue, I was repair permissions and to boot in safe mode. Since then all kinds of things are messed up.
I had to reset PRAM because the home and boot screens were were all stretched out of whack (this situation has occured once before shortly after getting this new machine)
EVERY SINGLE DATA FILE created prior to this safe mode is now LOCKED. EVERY ONE!!!!!! If I try to save any file so far I have tested, I am told the file is locked and I do not have permissions. My user mode didn't have administrative control before, but I changed that because unlocking everything to use it was more complicated having to enter the username and password. New files created are also locked. However, a new Pages file I have tested shows locked but it will save to the same file with a CMD-S.
Having to unlock files to save work in them really slows work. Apple not allowing Save As on Apple apps is getting really tedious. I tried with a non-Apple app (PhotoShop) and its files are locked after creation. This means I have to unlock every stupid file before I can save it, then it relocks If I go into Get Info to unlock the file, as soon as i close that window, the file shows locked when I do a new Get Info. This is not a good user experience!!!!!!!!!!!!!! I have hundreds of thousands of files used in publishing, graphics, photos, and music. I tried to save an existing Photoshop file back to the Desktop and was told I could not save because was locked - that I needed to unlock the file or enclosing folders. When Photoshop closes it says can't save Preferences because file is locked.
If I unlock the Sartup drive it relocks as soon as the Get Info window closes.
In Sharing and Permissions the user called Everyone has a custom settings and some files even have two Everyone entries. Newly created files have had the User with Read & Write and Staff and Everyone with Read Only. My user folder Get Info shows locked with the user, staff and everyone with Read & Write permmissions. If I unlock in Get Info it reverts to locked after I close the Info window.
Safari opens to the same page on this forum where another problem was discussed. I have reset selected items in Safari that I thought might have caused this, but no change.
Pages keeps opening a page that was thrown in the trash and is not even on the computer (at least doesn't show in the finder),
Numbers keeps opening a file that was opened and saved days ago.
iDVD will open the same project each time, even if something else has been worked on since.
I have cleared recent entries in these programs and the field keeps coming back when I open again.
I unchecked the Restore windows when quitting option in General Sys Prefs and when I open it again it is checked. I know that Lion will reopen a page if I quit without closing the window first. Now, at least with Apple apps, the same file opens now whether it exists or not as well as the new file I am opening by clicking on it.
I have run permissions check in Disk Utility several times.
It seems that it is affecting Apple apps that remember where there were last and the visiting history.
Autosave on apps other than Apple can't save because the files are locked and I get error messages.
iPhoto files saved on a firewire drive are also show locked but testing on a duplicate file, I found I can edit with PhotoShop and it will save the changes.
With Finale, it has saved the files, even though locked. The odd thing is that in the finder it shows the correct creation and modifided dates, but it shows an old last opened date. Pages documents show all three with correct dates/times.
I suspect there is at least one if not more Pref plist files that needs to be fixed, but I have now idea where to start.

HI,
Make sure you are logged in as the admin user.
Right or control click the MacintoshHD icon then click: Get Info
At the bottom of the Get Info window, click the gold padlock icon. You will be prompted for your admin password.
Under Privilege where you see: Read & Write "toggle" the arrows to set your permissions for system / admin etc.
Close the Get Info window.
Carolyn

Timemachine recovery files are locked

Hi there,
after recovering my Time Machine Backup of my account from 10.7 to 10.8 all my files have small locked symbol and I'm not able to start iPhoto or iTunes. It says the files are locked and I'm not able to open them.
Other accounts are not effected.
What happend and how can I fix it? Every file unlock and change user rights would take days.
Best regards,
Inesdora

This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Itl. files are locked, on Windows XP

I can't open Itunes, it states itl. files are locked, which they are not. I am not able to even erase itl files. I have erased Itunes and downloaded again, same story. Operating on Windows XP. I have looked everywhere for an answer to this, which I only fond for Windows Vista. VERY ANNOYING, any ideas anyone?

This error message can be caused by a probelm in the registry with the entry for My Music.
See this article:
http://support.apple.com/kb/HT1866
Sometimes My Music does not show up in TweakUI.
If so, see this POst:
http://discussions.apple.com/thread.jspa?messageID=1731188&#
But you may get away with this simple work around. Double click on iTunes Library.itl in the iTunes folder and see if iTunes Opens. This does not fix the underlying registry issue.

HT3275 2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

Photoshop CS3 - files are locked to 1 user after editing

Hi there,
Our setup is the following:
6 Mac OS X 10.5.8 clients with Adobe CS3. The images reside on a shred folder hosted on Mac OS X 10.5 Server. SC3 users are in an ACL group that has read/write permissions to all the shared files.
The issue we have is the following: One user opens an image and edits it in Photoshop, then saves changes and closes it. All other users who subsequently try to edit the file get the message "The file is locked. Use "get info" command in finder to unlock it". When you use the "get info" command as suggested - the "locked" tick box is greyed out and it says "you have read and write access to this file" - but you do not. The user who originally edited the file does not experience this issue, but everybody else does.
I first though it was an Mac permissions issue. So I tested by putting text documents in the abovementioned shared folder and then editing them as different users - no problems there, so it seems this issue is related to Photoshop.
Any advice on this problem would be appreciated. Also has anyone experienced the similar issue with CS5? As we are thinking about upgrading.
Many thanks in advance

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Excel files are locked since transfer from pc to mac

I just transferred my excel files from pc to mac and now i can't open them, it says they are "locked for editing" by user (i did not lock them) i can only open as read only. Is there a fix for this problem? Anyone else had this problem?

Where are these files saved??
Maybe this will help...
I found this post on a different web site - http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macexcel/office-files -locked-for-editing-in-mixed/d838b0d7-6b26-4206-b310-029c73cf0ba6.
This problem is caused by a temporary file that was not deleted after a previous edit session was completed. The file is hidden and not normally visible through the Finder. The easiest way to view hidden files is to install the hidden files dashboard widget which is available here:
http://www.apple.com/downloads/dashboard/developer/hiddenfiles_matthansen.html.
Use the widget to show hidden files then use Finder to open the folder that contains the spreadsheet you wish to edit. If your spreadsheet is named abc.xlsx, you will also see a file named ~$abc.xlsx. Delete the file that begins with ~$ and you will be good to go.

Word files are locked after being edited on Win machines

I have just setup a brand new mac mini server with Mac OS 10.6.7 Server.
Several Mac (via AFP) and Win clients (via SMB) access files on the server.
In general, everything's OK.
However, when a Win machine (with Word2007) edits (or creates) a word file, the same file results an error message in Word 2011 when a mac tries to open it. It says, the file is being used by another user - which is not the case, and the same error happens even if the machine that edited the files is switched off. Even if the file is copied, the copy still retains that "locked"-information.
However, when I hit "cancel" and then immediately try to open the file again, it opens without a hitch. And once, it was opened on a mac, I can edit, save, open, etc. as I like. Until, a Win machine edits the file. If a Win machine only opens it, no damage is done.
This is extremely annoying. Anyone any ideas?
One last tidbit: I employed a Win2003 server before instead of the mini and I had the exact same problem. So it doesn't seem to be related to the server. It's really driving me nuts.
-c.

I have the same problem. I solved it by saving with another name, then removing the old file, and renaming the new back to the original name. Still, after Windows client edits it again, it wont let you save again with a Mac to the same filename. Gladly we have only few files that are edited between Macs and Windows users. But it's still very annoying.

Pdf files are locking up mac repeatedly, having to reboot - Please Help

I've been using a website (not mine) where the user enters info into a form, and it generates a single page report that pops up a download dialogue box on your computer that says:
“bh_main-53.cfm” may be an application. It was downloaded from the Internet and will be opened by Adobe Reader. Are you sure you want to open it?"
Smaller text notes that firefox has already downloaded the file. When you say Open, it automatically launches Adobe Reader and displays the file. From that point it can be saved as a pdf. I've been using the macintosh Preview.app with the resulting documents also - Preview can open both pdf and cfm files. Oddly enough, Adobe Reader (AR) can't open cfm files, and yet it is automatically called and displays these files.
The problem is that it seems that working with these files either in AR or Preview frequently locks my entire computer up. Typically the screen just freezes, while the cursor can still be moved around. Sometimes I get the spinning wheel, but sometimes not. Computer won't take any input from cursor or keyboard, waiting doesn't help, and I wind up having to use power key to do a hard shutdown.
What is going wrong here, and how can I fix it?

Did you try this one
Apparently you need to tell Windows that you want to use the machine as a file server and that it should allocate resources accordingly. Set the following registry key to ‘1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ‘3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
After making these changes and restarting, I haven’t seen this issue arise again
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017

Large Files are locking up Windows 7 32 bit and 64 bit

I am a tech and have done over 30 clean installs and cant figure out what the heck is going on with large as in 1gig or more file transfers hanging up. All clean installs with tests done immediately after activation and updates. This is a MS problem. I have tried all the various fixes and find that the C drive seems to handle network files best. In multidrive situations turning off the Remote Differential Compression also seems to help. Please get a hot fix as this is on multiple machines and very easy to duplicate. I would say it would be a rare install not to lock from a C drive to a D drive when file sizes are more then 2 gigs. You guys are running out of time. I am a consultant and I'm ready to get sick over a great operating system that's worthless for large video files.

Did you try this one
Apparently you need to tell Windows that you want to use the machine as a file server and that it should allocate resources accordingly. Set the following registry key to ‘1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ‘3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
After making these changes and restarting, I haven’t seen this issue arise again
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017

I have inherited a Macbook from an ex-colleague and all his files are locked. I need to free up spaced

I need to remove files from a Macbook. Some of them are in locked folders. Some will simply not transfer to Trash. Some give a message about not finding an alias.
I am new to Macs and haven't a clue where to start.

Finstall wrote:
I need to remove files from a Macbook. Some of them are in locked folders. Some will simply not transfer to Trash. Some give a message about not finding an alias.
I am new to Macs and haven't a clue where to start.
Start here: MacOS, as a Unix based system, follow the concept of 'users' and 'permissions' (not legally, technical terms). Unlike a TV or car, you can not simply switch-on device - you have to permit before 'enter'.
A Mac is able to handle dozens of diff. users - but each user has diff. and own permissions. and only each user (or the 'super user', the admin) can change 'his/her' permissions, to files, to folders, to programs, to whole system.
so, if the ex-owner doesn't set YOU as the new admin on this Mac, only solution - and btw best practice - is to format the whole drive and re-install OS and programs from original installer disks.
do you have the disks? one or two grey 'dvds' ... ?

Exported CSV files are locked by Oracle SQL Developer 2.1.0.63

Whenever I export my query result into a CSV file, the resulting file is always locked for editing by Oracle SQL Developer 2.1.0.63.
Have anybody encountered the same problem? Do you know how can I report this as a bug to Oracle?
Thanks,
Adrian Wijasa
Banner Programmer/Analyst
College of St. Benedict/St. John's University MN
[email protected]

I got it too if I left SQl Developer open then go to Excel to edit my CSV - got message 'table_export.csv is locked for editing by another user'. If I close SQL Developer then open the file, it works. Seems SQL Developer's holding onto the file after creation.
Bugs are being reported in this forum.
Evita
Edited by: Evita on Jan 8, 2010 12:53 PM

Time machine restored files are locked and can't unlock them

After upgrading to an SSD, i was having problems with restoring files from Timemachine. i fiexed that by naming my ssd drive the same as the drive that was backedup using time machine. now, i can't seem to edite any of the files restored in Documents from the backup. not can i edit or add content inside the folders withing documents. i dont know whats going on. they appear lock and there is no way to unlock them. it says i will need to duplicate the items!
i'll run a permissions verify once. in the mainwhile, if u guys know about this please let me know. thanks.
Neerav

Stay calm!
Ok- saying 'locked' besides their name when you open it is Lion-speak for the fact that it hasn't been edited in a while. It should, once you try and edit it, pop up a dialogue offering you the chance to duplicate or unlock the file. In the instance that the second option isn't available, try some or all of the following:
-As the poster above said, try doing a get-info (cmd i) on a file/folder and seeing if it's locked. Uncheck it if it is. If you find they are ALL locked, you can change it on multiple items at once by selecting them and pressing cmd alt i
-If that didn't help, try looking at the permission at the bottom of the get-info pane. Does it say you have read-write access? If it doesn't, unlock these options with the little padlock at the bottom and change it so that you do.
-You can also try going to a high-level folder (namely, one with a lot of stuff in) and doing what I just described, then under the read-write permission hit the little cog-symbol and choose 'apply to enclosed items'. See if that helps.
-My final suggestion would be to find a free application called ACL fix. This helps repair dodgy or messed--up permissions using a simple drag and drop interface. Download that, and drag the affected folders onto it as per the instructions. Hopefully it should fix everything up.
Try all that, then let me know what's what

My files are locked and I can't edit them!

What is happening? I have DW CS4. I am trying to edit a site have used for years - my own site! Every file I try to open, I'm told it is locked and is View Only! This has never happened before. What is going on? Help!

If I try to download a file from the server, I get this message:
/martypics.html - error occurred - An FTP error occurred - cannot get martypics.html. Access denied. The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.

HT2518 i did this but files are locked? how do i make this actualy work?

i migrated PC fles to Mac Pro but now they are all locked adn i cant use them? How do i enable this?
Thanks!

Sorry, I was on completely the wrong track there - my bad.
In fact, my version of Silverlight has exactly the same issue. I was able to update it from here:
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
However, the updated version is still only a version 4 (there doesn't seem to be a version 7 for Mac), and it still has the same mysterious message about updating.
This is too weird
Bob

LabVIEW Internal SCC broken & files are locked

Similar Messages

Maybe you are looking for