Labview OI executable hangs when started.

Hello,
Specs:
2 Systems running:
Dell Precision workstations 670
Windows 2000
Labview 6.1
TestStand 2.0.1
I have compiled the Labview custom Operator Interface (slightly modified) into an executable file (SPR_TSM.EXE) which I installed on each machine. However, on one of the machines when running the executable, the application just hangs at the initial "loading" screen without even displaying the window (just a white square). Then I need to end the process from the task manager. The only way I have found to run the application is to open the SeqEdit.exe (sequence editor) which in turns opens my application because of using the TestStandLVGUIRTS server (!?). The same application runs OK in the other system. I have tried in several user accounts and the problem persists even for users belonging to the ADMIN group. All permissions in the C: driver were set to FULL CONTROL for EVERYONE.
Please let me know what can else I do to solve this problem. Thanks for your help.

Thanks very much for the info. It seems to be working, however not as I expected. For this machine I have the application (spr_tsm) running from a batch file that does:
spr_tsm /RegServer
spr_tsm
I tried just registering the application in the command prompt and then running the executable, but it still "hangs" when called from the shortcut. On all occasions I have confirmed that the TestStandLVGUIRTS is listed in the dcomcnfg screen.Another interesting note is that when uninstalling the application there is always an error "Write permission to the Registry denied, LABVIEW Server not unregistered" but it removes TesStandLVGUIRTS from the dcom list. Again, thanks a lot for the info!

Similar Messages

  • LabView (8.2) hangs when using I/O operations with traditiona​l NI-DAQ 7.4.4 after aborting LabView program

    Hello!
    We have the following problem:
    LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
    We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
    We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
    Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
    Best regards,
    Matthias

    Hello Sprice,
    Browse the shipping examples according to “Directory Structure” and then select
    DAQ to find the Traditional DAQ examples. 
    There a lot of examples that are written for counters (Counter >>
    daq-stc.llb >> Count Edges (DAQ-STC).vi). 
    What kind of signals are your photons creating?  Are they TTL compatible at a certain
    frequency?  You don’t care about overwriting
    your buffer?
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • Itunes 10 Hangs When Started On Windows 7 Ultimate 64 bit - Sp1 Beta 178

    Hi
    Itunes 10 hangs when started on Windows 7 Ultimate 64 bit - Sp1 Beta 178
    I have tried following things :
    -Scanned for Virus + SpyWare
    -Scanned for Corrupted System Files
    -Scanned for Errors in registry
    -Cleaned up items that startup with windows
    -Installed latest Ati Catalyst 10.8 Drivers
    -Checked settings in Itunes Version 10
    My Mobile Model :
    Apple Iphone 3gs 16 Gb
    My Hardware and software :
    HP Pavilion m9660sc PC
    Intel Core I7 980X 3.33 Ghz
    DDR3 PC2-8500 6 Gb Memory
    HDD WDC WD10EADS-65L5B1
    DVD-RW TSSTcorp TS-H653Z
    LG L225WT Size 22 Screen
    AMD Radeon HD 4850 1 Ghz Memory
    Mainboard Pegatron Intel X58 Express
    Windows 7 Ultimate 64 bit
    Windows 7 Service Pack 1 Beta 178
    Adobe Reader 9.3.4 - Norwegian
    Spotify Version 0.4.7
    Microsoft Security Essentials 2.0 Beta
    Personal Ancestral File 5
    Java(TM) 6 Update Version 21
    Google Sketchup Pro 7.1
    Google Chrome Version 6.0.472.53
    Tales Of Monkey Island Version 2.0.0.0
    Kai Anders Wold - [email protected]

    Here is the latest update :
    Removing Microsoft Security Essentials 2.0 Beta fixed the itunes 10 hangs.
    Kai Anders Wold - [email protected]

  • RAC hangs when starting or stopping 2nd instance of 2 node RAC

    Has anyone seen the problem with all transactions and/or logins hanging when starting or stopping the 2nd node of a 2 node RAC database. When I shut down the 2nd instance using srvctl I occasionally get errors and long delays connecting. On our larger database with instances having a very large SGAs, trying to connect you sometimes get ORA-12537 or ORA-01033. Users experience a very long hang before getting the errors. These instances have very large SGAs of about 30GB on each node.
    In the log of the first instance we see messages like the following for quite a while.
    Global Resource Directory frozen
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Jan 8 06:59:08 2007
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Mon Jan 8 06:59:08 2007
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Mon Jan 8 06:59:23 2007
    LMS 0: 20740 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20744 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 0: 20882 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20627 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    LMS 0: 20781 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    Thanks in advance.

    I have tested with only one node and starting and stopping is much faster without any cache fusion traffic. The application is not RAC aware, it was written without regard for RAC. As you say there may be some accessing of the same block by all nodes causing RAC to remaster blocks when a node is shut down.
    My concern is the length of time users are afftected when I am starting a node that has been offline for a while. With the large SGA I have, it appears users are affected adversely for several minutes, in affect causing an outage which we are trying to avoid by using RAC.

  • Firefox hangs when starting, Firefox window title bar says "Firefox (not responding)". (was: Firefox crashes)

    Firefox hangs when starting, during session restore. Uninstalled then installed new Firefix. Same problem. Firefox window title bar says "Firefox (not responding)". It just hangs, won;t display even one page. What to do? Tried -safe-mode, smae result.

    I keep too many tabs open and whilst trying to download a pdf file Firefox 8.01 hung and when I restarted it the Embarrassing page opened. I knew which tab I needed to delete but as soon as I tried to navigate to the errant tab it said "Not Responding" and nothing I could do would make it respond. I tried command line opening in safe mode and the same thing happened.
    I have read the other posts but cannot send a crash dump as it is "Not Responding" and does not get far enough to crash.
    IanH

  • FF hangs when starting up

    FF hangs when starting up; error message Process: firefox-bin [1036] Path: /Applications/Firefox.app/Contents/MacOS/firefox-bin Identifier: firefox-bin Version: ??? (???) Code Type: X86-64 (Native) Parent Process: bash [970] Interval Since Last Report: 1304 sec Crashes Since Last Report: 1 Per-App Interval Since Last Report: 0 sec Per-App Crashes Since Last Report: 1 Date/Time: 2012-02-06 10:21:47.854 -0800 OS Version: Mac OS X 10.5.8 (9L31a) Report Version: 6 Anonymous UUID: 00AE1616-697F-4365-AFF4-0979E3DD1691 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: unknown required load command 0x80000022

    Sorry, I do not use or ever heard of "freehand MX". All I can tell you is to make sure it is compatible w/your current OS & to post in the Adobe Forums since it is an Adobe product.
    "also if i could ask what cable would i need so i can get my emac talking to my imac, for transfering files etc."
    See Knowledge Base Article - http://docs.info.apple.com/article.html?artnum=25575 Mac OS: Moving files from your older Macintosh to a new one
    Also, if you have a High-speed connection, the easiest & fastest way is through AIM (AOL Instant Messenger).
    iChat has the same ability of transferring large files as AIM.
    http://docs.info.apple.com/article.html?artnum=150934
    Adium
    YouSendIt to email the files to yourself.

  • PS Hangs When Starting

    PS hangs when starting by clicking icon on Windows 8.1 Pro Taskbar: Grayed Welcome screen with nothing clickable. If open any image any format only one layer called "Index" is locked and cannot unlock. Under Layer menu only one submenu available and that is "Layer Style..." and when that is hovered only one option is available and that is "Global Light..."
    Is this some psycho religious fanatic virus? What is going on?

    Maybe a Preferences reset will clear it up.
    Start Photoshop and very quickly hold down Ctrl-Alt-Shift. When the "Delete Photoshop Settings File" dialog appears, release those keys and click "yes" and let Photoshop finish loading.
    You have to be quick with those keys, so it may take a few tries.

  • SAP system hang when start the addon.

    Dear Expert,
    I just upgrade one of the SAP B1 server from 2007A to SAP B1 8.8 PL15, everything going smooth both server and clients.
    Except one client (new laptop with Win 7 Pro x86), this laptop fail to start the addon.
    Others clients with same specs Win 7 Pro have no problem to start addon.
    Addon started manually.
    After click start button for that addon, the system hang. If without the addon system working fine.
    If anyone have ideas to check much appreciate and thanks in advance.
    Regards,
    Mat

    Hi Bala,
    I did try your steps, but no luck. System still hang when start the addon.
    But, I can start SAP addon , example i try Screen Painter, and can start successfully. Only our addon cannot start.
    I'm not suspect our addon because others client working smooth, even the server also working fine.
    I did re-install DIAPI, even re-install SAP client a few time, but still fail to start addon (delete SAP client folder before install).
    Any one face this problem?
    Regards,
    mat
    Edited by: Mat Mat on Apr 21, 2011 10:43 AM

  • So aslmanager taking 99% and Console.app hangs when started

    So aslmanager taking 99% and Console.app hangs when started
    anybody know why aslmanager needs 99% of CPU and 2+ GB footprint?

    ok, i found a solution that worked for me. this may or may not be the problem you are having but give this a shoot. i think in my case the asl database got corrupted. unline tiger and below this database is not stored in asl.db in leopard. in leopard, the entire /var/log/asl directory is the database. so to remove the database and start from scratch, you need to
    sudo launchctl stop com.apple.syslogd
    sudo launchctl stop com.apple.aslmanager
    sudo mv /var/log/asl/* ~/tmp (you might as well use rm but i wanted to be safe)
    sudo launchctl start com.apple.syslogd
    For good measure I also ran the maintenance scripts:
    sudo periodic daily weekly monthly
    My machine has been dead quiet for hours now. darn, it's back to the kitchen for making my toast.
    so, what did we learn? Mac, PC - same thing; both are great until you have problems. only with pc's you have a lot more resources to tap into...
    Cheers,
    Haje

  • Labview 8.0 hangs during start

    I am having a recurring problem with LV8.0 hanging during start every few weeks.  I startI click the LV icon, LV appears in the Windows taskbar and then it hangs.  The NI splash does not appear.  Once this behavior starts, it does it every time thereafter.  In the Windows Event viewer, I get the following message:
    Event Type:    Error
    Event Source:    Application Hang
    Event Category:    (101)
    Event ID:    1002
    Date:        3/13/2006
    Time:        8:19:56 PM
    User:        N/A
    Computer:    JA3
    Description:
    Hanging application LabVIEW.exe, version 8.0.1.4000, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
    I have contacted NI Support, but they were unable to provide a resolution other than suggesting a reinstall.  I've done a complete reinstall of LV 8.0 two times already and am poised to do it a third time.  I'm getting fed up with the uninstall/reinstall approach since this sucks up 1/2 day of my time per episode.
    There are two potentially relevant entries in the Event Viewer, that occurred prior to LV8.0 going into perpetual hang mode.
    Event Type:    Error
    Event Source:    Application Error
    Event Category:    None
    Event ID:    1000
    Date:        3/12/2006
    Time:        3:33:37 PM
    User:        N/A
    Computer:    JA3
    Description:
    Faulting application labview.exe, version 8.0.1.4000, faulting module lvdaq.mxx, version 1.0.0.49154, fault address 0x0001a1a7.
    Event Type:    Information
    Event Source:    NI Variable Engine
    Event Category:    None
    Event ID:    0
    Date:        3/13/2006
    Time:        6:22:14 PM
    User:        NT AUTHORITY\SYSTEM
    Computer:    JA3
    Description:
    The description for Event ID ( 0 ) in Source ( NI Variable Engine ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event:
    NI Variable Engine started.
    Executable: C:\Program Files\National Instruments\Shared\Tagger\tagsrv.exe
    Plug In Path: C:\Program Files\National Instruments\Shared\Tagger\
    Plug Ins: LogosRTServer, NI OPC Server Plugin., LogosRTClient.
    Any help in finding a solution to this recurring issue would be appreciated!
    Thanks!

    I'm glad to hear the ini file solution worked.  It was my first guess as to the source of the problem. The differences are so few between the good and bad file it would be useful if you could try a few edits to narrow the source of  the problem.  I only suggest this because it may be difficult to reproduce at NI since the problem may be specific to your installation of various NI software.  This will probably only take 10-15 minutes.
    You'll see in the ini files that the differences come down to the lines that start with the list below.  I am most suspicious of the section starting ProbeDefaultCache.  I don't think the window position or recent files list has anything to do with the hang.  I am not sure why there are parenthesis around ",CleanUpWire" in the good ini file.  Everything below the empty line below is only in the bad ini file and not in the good.  I think I would start by 1) making it hang again with the bad ini file, 2) deleting everything from the bad ini below the empty line below, 3) putting quotes around ",CleanUpWire" in the 4th line below, 4) deleting the recent files list, 5) updating the window position, AND FINALLY 6) changing the ProbeDefaultCache to that of the good ini file.   If it turns out to be 2 that fixes the problem, I'd add it back and then delete lines one at a time. 
    Let me know what you find.
    Kitt
    ProbeDefaultCache=
    ProjectExplorer.ClassicPosition=45,28,620,380
    RecentFiles.pathList=
    NoAdvice070=,CleanUpWire
    FPGADialogControl=compileWarningIfBitfile
    MenuMRUItems="Toolsptions...,1391;"
    FPFont="" 120 IS
    NewDlgRecentMainTemplates.pathList=""
    NewDlgBounds=800;600
    NewDlgLastSelected=C26E7225-44A0-4CDD-8B16-BA9836DBD5A7
    NewDlgSmall=False
    NewDlgCollapsed=VI
    NewDlgRecentTemplates.pathList=""
    DontShowProjectRemoveDialog=True

  • Windows 2003 R2 Server hangs when starting Oracle 9.2 service

    Hi,
    I've been having an error with an Oracle 9.2.0.7 installation where the server will hang to the point where it needs to be powered off as it is completely unresponsive. It hangs when I start the Oracle service.
    I've tried installing the system from scratch a few times(OS, OS patches, Oracle 9.2, Oracle 9.2.0.7 Patch set, Database) a few times however I keep having this same issue issue. I had the system running properly up until yesterday and I thought the issue was SP2 for Windows 2003 as I didn't patch the OS before installing everything however it is happening again now.
    The listener is started and I can't even connect to an Idle instance through SQLPlus when this happens. I just get a TNS Listener error which I will list below. SInce this keeps happening, I'm wondering if it may be a hardware issue (Installed on an HP ML350) but I'm also wondering if it may be SP2 for WIndows 2003 server and was wondering if anyone else has seen this issue. I havne't found anything in the forum nor on Google so I thought I'd post here.
    Here are the last entries in the DB log when it hangs;
    ARC1: Archival started
    Mon Mar 10 14:18:59 2008
    ARCH: STARTING ARCH PROCESSES COMPLETE
    Mon Mar 10 14:18:59 2008
    ARC0: Becoming the 'no FAL' ARCH
    Mon Mar 10 14:18:59 2008
    ARC1: Becoming the heartbeat ARCH
    Mon Mar 10 14:18:59 2008
    ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
    Mon Mar 10 14:18:59 2008
    ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
    Mon Mar 10 14:19:00 2008
    Oracle Data Guard is not available in this edition of Oracle.
    Mon Mar 10 14:19:00 2008
    alter database mount exclusive

    Hi,
    Since the server locks up when the service is starting, it's hard to determine how high it gets but after it starts, it quickly gets up to around 277MB and just stays there.
    I was thinking it may be a memory issue as well as it displays the symptoms of a "light speed" memory leak. I had 4GB of memory in the server and realized that WIndows 2003 only saw 3.5GB so I decided to remove 1 GB but that didn't make a difference.
    How would I go about ensuring that the memory consumption on my DB server does not get swapped much?

  • Hang when starting JDev in Win2k server...

    I've searched this forum and in fact quite a lot posts are saying that they have the same problem. When starting the JDeveloper in windows 2000, after loading the addins it hangs and leaving the splash screen alone :) Many replies said JDeveloper 3.1.1.2 is win2k certified. Ok, here is another unsuccessful case, here is the config of my machine:
    PII 333 192MB Ram
    Windows 2000 server SP1 installed
    MS Visual Studio SP4
    MS Office 2000 Sevice Release 1a
    Default IE version bundled with windows 2000
    JRE 1.3 international version
    System locale: English (United States)
    Installed Languages:
    Western Europe and United States (Default)
    Traditional Chinese
    Simplified Chinese
    Japanese
    And I haven't install any Oracle database and OCI yet. I can say my system config is "clean" enough as all softwares are new installation with most updated patch. And when I set the default language to others (eg. trad. chin.) the JDev even cannot start (only hanged minimized icon in task bar without loading addins and splash screen), therefore I here provide my langauge settings. Thank you in advance in any help and suggestions

    Alan,
    This may not be of much use to you, but all the same I am running JDeveloper3.0 (although this version is not certified for Win2K!!!) on Windows 2000 server with success.
    My system config is
    HP Brio Pentium III 600 Mhtz.
    316 (256 + 64) MB RAM
    Installed Softwares :
    Oracle 8.1.5 Enterprise Edition
    JDeveloper 3.0
    Rational Rose 2000e Enterprise Edition
    IBM WebSphere Application Server 3.0
    Visual Age for Java 3.5 Advanced Edition
    IBM HTTP Server V1.3.6.2
    No problems till now.
    However, I do get some problems with DAC forms in the Design mode - JDev simpler exits!!!But I can counter that by recompiling my projects and then switching in the Design mode for the DAC form
    Other than this there is no serious problems
    --Sandeep

  • MBP 'hangs' when starting up (beachbal appears)

    When starting up the MBP 'hangs' and the beachbal appears. Only a hard reset (power off/on) helps.
    This started after installing lion.

    Sorry, I do not use or ever heard of "freehand MX". All I can tell you is to make sure it is compatible w/your current OS & to post in the Adobe Forums since it is an Adobe product.
    "also if i could ask what cable would i need so i can get my emac talking to my imac, for transfering files etc."
    See Knowledge Base Article - http://docs.info.apple.com/article.html?artnum=25575 Mac OS: Moving files from your older Macintosh to a new one
    Also, if you have a High-speed connection, the easiest & fastest way is through AIM (AOL Instant Messenger).
    iChat has the same ability of transferring large files as AIM.
    http://docs.info.apple.com/article.html?artnum=150934
    Adium
    YouSendIt to email the files to yourself.

  • Photoshop (CS3) Hangs When Started

    I just purchased PS CS3 and after spending an entire evening and morning getting to the point where the software asked for my serial number, I still have not gotten anything other than a PS window and an hourglass cursor with the window indicating that Adobe Photoshop CS3 is not responding. I am running Windows XP with all the Windows updates installed. I get the same result with the version right off the DVD or after having dowloaded and installed all the updates to the various components. I did many installs finally using the CS3 cleanup script at level 3 and this allowed me to enter my SN.
    If I look at the application event log in XP I can see the following:
    Hanging application Photoshop.exe, version 10.0.1.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
    I looked through the forum and did not see the exact problem in other posts. Is there a switch that can be used with Photoshop.exe to log the application startup?
    Any help would be appreciated. I am starting to think I made a terrible mistake buying this software based on using an older version years ago.
    Thanks,
    John

    I am also trying to install CS3 on my computer and I have the same problem. I am using Windows Vista. After installing, the application hangs also just as described. I have contacted customer service who told me to uninstall and reinstall. I did and it continues to hang when opening. I contacted customer service and they told me to uninstall and reinstall. Did so and it hangs.
    Several customer service of uninstall, download CS3 from website, and still hangs.
    After several days I was referred to technical support, they had me uninstall and reinstall. The application still hangs with technical support on phone. After 2 hours on the phone, we were still creating new users, uninstalling and reinstalling, changing msconfig and still hanging.
    Finally I was told by tech support to uninstall and reinstall again but you guessed it, it was close to closing for tech support and was told I would have to call back.
    Waited until Saturday and you guessed it, tech support is only available Mon thru Friday. I have to work to pay for programs like this and can't take off during the week right now to spend all day with tech support.
    I never saw and answer to the post as to what steps to take to correct it from hanging.
    anyone else have same problem or can resolve it?

  • Labview 8.6 crashes when started

    Hi,
    I just installed labview 8.6 in an old Linux machine (kernel 2.4.21), and even when labview installed fine (no errors or warnings at all), when I start labview, it crahses with this message:
    LabVIEW caught fatal signal
    8.6 - Received SIGSEGV
    Reason: address not mapped to object
    Attempt to reference address: 0x4
    Segmentation fault (core dumped)
    Now, the core dump trace says this:
    #0  0xf6513959 in XSetICFocus () from /usr/X11R6/lib/libX11.so.6
    #1  0x08c9664e in WGetStyle ()
    #2  0x08c967bb in WGetStyle ()
    #3  0x08c96405 in WIsAtRootLevel ()
    #4  0x08c96934 in WSendEvent ()
    #5  0x08c9705a in WCreateEx ()
    #6  0x08bca719 in ChangeVINameWrapper ()
    #7  0x08bf875f in CheckShortNameSize ()
    #8  0x0857ef65 in DNAllocCookieForObject ()
    #9  0x0857f0cd in DNAllocCookieForObject ()
    #10 0x0857ef83 in DNAllocCookieForObject ()
    #11 0xf629679a in __libc_start_main () from /lib/tls/libc.so.6
    #12 0x0807c021 in ?? ()
    So it is somehow related to the X server -I think-. Now, the odd part is that if I start labview with a vi, like
    labview mydiagram.vi
    it starts an opens mydiagram.vi (if mydiagram.vi is set to run when started, it will even run ok). However, if I try to open the diagram, then it will crahs with the same error/core dump.
    Has anybody seen this problem?
    Thanks.

    Bruno,
    Thanks. I  have verified also that all the requiered libraries are there:
    % ldd labview
            libGL.so.1 => /usr/X11R6/lib/libGL.so.1 (0xf65a4000)
            libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0xf64c5000)
            libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0xf64b7000)
            libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xf6404000)
            libm.so.6 => /lib/tls/libm.so.6 (0xf63ce000)
            libdl.so.2 => /lib/libdl.so.2 (0xf63ca000)
            libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf63ba000)
            libc.so.6 => /lib/tls/libc.so.6 (0xf6281000)
            libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xf6278000)
            /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xf65e9000)
    Regarding how old is the machine, the starnge thing is that I have anoither machine, as old as this -the same kernel-, that is running hapully labview 8.5. So, unless something important changed between 8.5 and 8.6, it is hard to imagine this is due to the age of the kernel or machine. I could try installing labview 8.6 on the other machine, but I'm a bit afraid, since it is a mchine with a running, in-work systenm that I cannot disturb -I know multiple labviews can, in theory, live toguether, but I don't want to find out that "not quite" ...
    Thanks a lot anyway
    M.B. 

Maybe you are looking for