LabVIEW on MacBook with Boot Camp

I'm interested in getting a MacBook Air to use as my personal computer, but I really need to be able to run all the work data acquisition hardware if necessary. I primarily use a PXIe-6356, which I know is still unsupported in OS X for whatever reason. Would there be any issue using it in Windows 7 via Boot Camp? I would tend to think not, since it's just any other Intel box at that point, but the only forum posts on the subject are very old.

Theoretically you should not have any real problem using a MAC with a windows partition. It should act as a normal windows machine although National Instruments does not specifically test our hardware on Macbooks running Windows. You are definitely correct in your assumption that it should act as any other windows machine with an intel processor.
Jacob K
Jacob K || Applications Engineer || National Instruments

Similar Messages

I'm trying to install Windows 7 on my MacBook with Boot Camp Assistant

I'm trying to use Boot Camp assistant to install Windows 7. I have a disk, I've done everything right, but for some reason, whenever I click Install on the final Boot Camp prompt, it only gets as far as the Windows is loading files... part after it reboots to the Windows hard drive. I've tried everything, but it still won't work. Im using a 13" MacBook Pro with Retina. It has the latest software version (OS X 10.9.1) and I have a USB with Windows Support Software. The disk is Windows 7 Home Premium 64-bit.
I've been trying for the last two days, and I really need help!
Thanks.

I solved my own problem. I just kept trying, and eventually it worked!

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Windows 7 professional 64 Bit on MacBook Pro Retina 15 with Boot Camp ?

Hallo guys, i have a big problem with installing Windows 7 professional 64 Bit on my MacBook Pro Retina 15 with Boot Camp. No matter what i try i get a black screen after partitioning or get a message like " No bootable disk" or " No System Disk availabe".
My Mac has : OS X version 10.8.2, 16 GB RAM, 512 GB memory, 2.6 GHz Intel i7 and is only a week old
My Boot Camp is version 5.0.1
My Windows InstallingDVD is one year old now, i needed it to build a PC last year, hope that doesnt make a difference, its a full version, so not just for upgrading.
From what i saw in the apple support it should work on my macbook. I hope someone can help me.
Thanks in advance.

Ok, problem solved. I looked a bit more here in the questions and there was the answer and its quite simple.
Somehow an USB-stick makes problems while Windows wants to install, i dont know why. So i just made everything over DVDs and now everything works fine.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
Usually, you should do like this:
- while in win, restart
- immediately after chime, press option or alt key
- wait for 2-3 seconds, you should see the boot options
- select Mac OS partition
If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

I have a problem with boot camp and maybe macbook pro?

I am having issues with boot camp here is what I did.
I attempted to partition for windows then this message popped up after 2 minutes:
Verification failed. this disk could not be partitioned.
Use Disk Utility to repair this disk.
so I used the disk utility to repair the problem then this message came:
First Aid failed
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file Temp File
(It should be 13 instead of 0)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
pair",0)
Checking volume information.
Invalid volume free block count
(It should be 23087569 instead of 23087570)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Macbook Pro running Windows with Boot Camp, wanting to use iMac as second monitor.

I am using a Macbook Pro that is running Windows with Boot Camp. I want to connect it to my iMac so that I can use the iMac as a second monitor.
If it is not possible, I also have a TV that I could use using an HDMI, however when I tried this my Macbook Pro running Windows 8.1 did not detect it in the Display Settings.
What are my options? I just want to use my iMac or TV as a second monitor!!
Any help is appreciated, tMachanks!

See if your equipment qualifies:
http://support.apple.com/kb/HT3924
http://support.apple.com/kb/PH14264
Ciao.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

VMware Fusion vs. Parallels (with Boot Camp) -- help please!

Hello. I have just reinstalled Mac OS X (Leopard) on my MacBook and am looking to install Windows XP SP2. I will be installing a Boot Camp partition -- I know that much -- but I also want to use Parallels or Fusions so that I have the option of running the Boot Camp partition within OS X. Somehow, over my years as a Mac user, I have acquired both of these applications (Fusion and Parallels), and I was wondering if anyone has any information on the differences between the two. Two questions:
1.) As I just mentioned, I'm just looking for any information on the differences between the two apps -- what features one offers that the the other doesn't -- why I might want to choose one over the other -- and so forth.
2.) Since I have both apps, would it be possible to have both installed at the same time? In other words, could I have both Fusion and Parallels installed on my computer, and then, when it comes time to open Windows, choose which app I want to open and use? (not sure there'd be any point to this, but just in theory, could it be done?)
Thanks in advance -- any info in regard to either question is much appreciated.

Thanks for the replies. Although I've never used Fusion before, I've installed Parallels with Boot Camp partition three or four times before on this computer, and it has always worked great for me, so I know I want to use Boot Camp. And as far as the application goes, sounds like I'll be using Parallels, mainly because it's what I'm used to. That Wikipedia link was exactly what I was looking for -- I had checked Wikipedia before I posted the topic here, but I didn't find that comparison page. Anyways, they look about the same (Parallels and Fusion, that is) for anything I'd be concerned with, but where there were any differences, they seemed to work in favor of Parallels (except for Linux-related features, in which Fusion seemed to have the upper hand, but I don't use Linux). So, again, thanks for taking the time to respond -- much appreciated. Have a good one.

A Potential Convert Looking for Some Help with Boot Camp

I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: Pyrojoe

I can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy

Leopard 10.6.8 with Boot Camp 3.0.4 do not support Windows XP SP2???

Hello!
I have my MacBook Pro with Leopard 10.6.8 with Boot Camp 3 on it.Reading a BOOT CAM article I could see that it supports Windows XP SP2.I just installed Windows XP SP2...and when I am trying to use the drivers from MAC DVD it says that BOOT CAMP needs Windows 7.Why I can not use XP?Or where I can get the proper drivers?I have downloaded Boot Camp Drivers XP update pack 2.1 and tried touse it in that XP but just double clicking on it doesn't happen anything:(
Please Help.

Your saying BC 3.4 is on the Mac installer disk? I picked mine up in august 2011 and it only has 3.1 on it if I remember right. How did you check it?
As of today my BC Assistant says 3.4 but the Control panel in Windows only says 3.3, I figure it an't broke I'm not worried about it.
When you insert the disk, it asks you what to do, Run or Open, select Open.
Make a new folder on the desktop in XP, drag ALL the files over to it.
Right click on the setup.exe and select one of the options:
1)-Troubleshoot Compatibility, do what it suggests,
2)-Select Properties / Compatibility / click Run this program in Compatibility mode: then select XP sp2 and work your way up.
If anything pops up about permissions then right click on it again and select Run as Administrator.
If it still won't work then open the Boot Camp folder / Drivers folder / and install each one manually.

Problem with boot camp and windows 8

I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

Install Windows 8.1 with Boot Camp

Greetings you all,
I've been trying to install WIndows 8(.1) on my MacBook Pro early 2011, but without any success. I downloaded the .ISO of Windows, stored it on my external HDD, downloaded the software via Boot Camp to host Windows (I'm sorry I'm french so I'll have to translate everything) and put it on another external HDD, and when I plug them to my Mac and start the installation of Windows, it doesn't detect the USB.
What should I do? If possible, avoiding any installation of the disk image on a DVD.
Thanks.

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 8.1 with boot camp on mac mini troubles

After installing a licensed Windows 8.1 with boot camp on my mac mini (2012,i7,4gb ram) my mac os Mavericks have trouble with starting,and i can't run recovery and safe mode.Another problem-i don't have sound in windows,but windows show me no troubles,and red light apear!!!Please help!

Hello Mickaelpopo,
Thank you for the question. It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro. Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
Which versions of Windows work with Boot Camp 5?
You can use:
Microsoft Windows 8.0 (64-bit)
Microsoft Windows 8.0 Pro (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
Windows 8.1 is not supported with Boot Camp 5.
You can find more information here:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Thank you for using Apple Support Communities.
Best,
Sheila M.

LabVIEW on MacBook with Boot Camp

Similar Messages

Maybe you are looking for