LabVIEW opening @ Bangalore, INDIA

Hi,
I have two labVIEW developer opening
* Experience: Minimum of 4+ years
* Should be able to handle the projects individually with minimal assistance.
* Engineering Degree is must
Position open for : Freelancers / Consultants / Full time employees.
Mail me your profile to [email protected]
Best regards,
Raja

Hello Friends,
Moog Aircraft Group, Bangalore is looking for LabVIEW and TestStand Engineers with 1 to 8 years of experience in test automation field. Please find the job description as mentioned below. If interested, please send the resumes to [email protected] or [email protected]
For more information regarding company and its product profile, please visit us at www.moog.com\aircraft
Job Location: Bangalore, India
Job Profile:
Design, Development and Configuration of Automated Test Equipment (ATE) for complex systems\sub-systems, simulation and control system environments.
LabVIEW and LabVIEW RT\FPGA proficiency (Desirable certifications include CLAD, CLD, CLA).
Familiarity with National Instruments Hardware Platforms. General Communication Protocols (GPIB, RS-232/485, EtherCat).
Exposure to Avionic Communication Protocols is an added advantage (ARINC, MIL1553) dSPACE®, Python, Matlab® \ Simulink® knowledge is an added advantage.
Aircraft systems/sub-system testing verification and validation environments.
Knowledge of Aircraft Actuation systems is an added advantage Process Standards (D0-178\CMMI) is an added advantage.
Note: 1) Please do not send the resumes, if you have attended the interview at Moog in last 6 months.
Regards,
Karthik SP

Similar Messages

Required LabVIEW Developers (Bangalore, India)

Profile: Labview Engineers
Location: Bangalore.
Desired Candidature
• B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation.
• 1-2 Years of experience in LabVIEW.
• CLAD, CLD or CLA from National Instruments preferred.
• Excellent written and verbal communication skills.
• Experience in programming language C/C++/VB is an added advantage.
There are 4 openings.
send your resume to [email protected]
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Well this opening is for "Captronic Systems Pvt. Ltd.", Bangalore.
and we're one of the 17 "Alliance Partner" of NI.
We have specialisation in "Industrial Automation, Automated Testing, Validation Testing, Data Loggers and Automated Test Equipment".
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

LabVIEW Position in Bangalore, India

We Are going through the second round of hiring to add to our existing team of LabVIEW Engineers who are based in Bangalore.
The Job Details are as follows:
Job Title: Systems Engineer (Test Software and Integration Group) or Senior Systems Engineer (Test Software and Integration Group)
Locations: Bangalore, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 2 to 5+ Years
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X
Familiarity with NI TestStand
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English
Desired
LabVIEW-based Object Orientated Programming
MS Project
UML
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
The Contact information is as follows:
Sri Ranjini
C V HR /FACILITY ASSISSTANT VI Engineering Solutions Pvt Ltd V A L U E I N T E G R I T Y
No. 16 , Curve Road, Tasker Town,
Bangalore - Ph: 080 - 41132277 / 76.
E-mail : - [email protected]: [email protected]
Website : - [email protected]
Note: If you have already been interviewd recently (in last 6 months) for a similar position at VIE-Bangalore office, please do not respond to this post.
Thanks.

Dear Sir/Madam,
I saw the opening for this job position in your website. I am highly interested in this project. I am perusing Master in Technology in electronics and communication (Optoelectronics and Optical Communication) from the University of Kerala, Thiruvanthapuram, India and currently doing a project “ Automation of laser cooling set up towards precision experiment with the help of labview” at Raman Research Institute, Bangalore, India (Jan – Nov 2009). In this project I used DAQ card and IMAQ. I have completed my B.Tech Degee in Electronics and communication in 2007,Cusat university, Kerala, India.
             I look forward to hear from you soon. I am attaching my resume with this cover letter..Thank you ahead of time for your kind attention.
                                                                                                                      With Regards,
                                                                                                                      Umadevi.P.C
                                                                                                                      [email protected]
Attachments:
NIJILA-4.doc ‏49 KB

Project Leader (Bangalore, India)

Our client, a leading System Integrator based in Bangalore, India, is looking for Project Leaders (two poitions open)
Essential Skills:
Should have handled a team of 3-4
people involving team building, technical mentoring, work review, Project
Planning, Estimation, Issue Resolution, Analysis, Client interaction, Lead the
team technically, Offshore or onsite coordination, Prepare Project Plan, Prepare
Work-Break-Down structures & detailed effort estimates. Responsible for the
project execution from Project initiation to Project Closure, Involve in
requirement analysis, design and development, Testing, implementation, customer
Interaction, hands on experience in understanding the clients requirement,
Project review, code review, project implementation & delivery, Ability to
track progress, ability to follow up and complete multiple tasks. Candidate
should have thorough knowledge of Software Development Life Cycle, Good
communication skills, interpersonal skills along with Resource Management as a
pre-requisite. The incumbent should also have reasonable experience in client
interaction.
Prior experience in handling
software projects in the field of System Integration, Tests and Measurement and
Automation industry is an added advantage. Also, candidate with experience in
LabVIEW, Labwindows/CVI, TestStand SCADA, PLC programming will have special
consideration.
If you are interested, mail your resume to labviewjobs4u (at) yahoo (dot) com
Regards
Mathews J.
Message Edited by Mathews J on 06-10-2008 05:55 AM

Hey positions r still there?
Swati Phadnis...

G-programmers for Bangalore- India

We are looking for two bright engineers with LabVIEW experience (2+ yrs experience minimum required in ATE arena). We need candidates with excellent English communication skills.
Please send your resume ASAP to
[email protected]
Ph: 080 - 41132277

Dear Sir/Madam,
I saw the opening for this job position in your website. I am highly interested in this project. I am perusing Master in Technology in electronics and communication (Optoelectronics and Optical Communication) from the University of Kerala, Thiruvanthapuram, India and currently doing a project “ Automation of laser cooling set up towards precision experiment with the help of labview” at Raman Research Institute, Bangalore, India (Jan – Nov 2009). In this project I used DAQ card and IMAQ. I have completed my B.Tech Degee in Electronics and communication in 2007,Cusat university, Kerala, India.
             I look forward to hear from you soon. I am attaching my resume with this cover letter..Thank you ahead of time for your kind attention.
                                                                                                                      With Regards,
                                                                                                                      Umadevi.P.C
                                                                                                                      [email protected]
Attachments:
NIJILA-4.doc ‏49 KB

Which Certification exams available for 2009 teched at Bangalore ( INDIA )

Hello SAP Teched Team,
Can you please let us know which certification exams (i.e. C_TADM51_70 with description) will be offered in Bangalore (India)?
If it is still in process which certification exams will be likely to offer? Thanks.
Best Regards,
Tushar

You can check these links
http://www.sap.com/services/education/certification/certificationfinder.epx?context=[[101|2|]]|
http://www.sap.com/services/education/certification/certificationfinder.epx?context=[[104||]]|
thanks
G. Lakshmipathi

Job oppurunities for Labview developers in India

How is job oppurunities for Labview developers in India?

There are two job boards available. This forum is explicitely for help when programming Labview.
If you are posting (offering) a job, visit this forum: http://forums.ni.com/ni/board?board.id=JobPost
If you are looking for a job, then visit this forum: http://forums.ni.com/ni/board?board.id=JobSearch

Oracle 10g DBA training in Bangalore, India

Can anyone please let me know the address and phone number of the Oracle University campus in Bangalore, India where I can get Oracle 10g DBA training? Thanks for your help in advance.

Thank you for the prompt answer. I found what U was looking for in the link below - http://www.oracle.com/global/in/education/maps/contact_us_westindia.html
This is the contact information to find out more about the training:
Karnataka & West India
For Oracle Training Inquiries
Oracle Education
Commerce@Mantri
Level 4, #12/1 & 2,
N.S Palya,
Bannerghatta Road,
Bangalore - 560 076
Con.Person: Vijay Suresh
Email Id: [email protected]
Phone: +91 80 4108 4626
Toll free Number: 1800 425 8877 (Toll free in India)
Email id: [email protected]

How to contact MSI Authorized personnel for/from Bangalore, India.

Hello,
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer and took it back to the same shop. The sales person most probably misguided me that the motherboard is at fault and made me RMA the motherboard.
The MSI RMA center D-LInk people made me wait 1 month and then have given me a P7N Platinum, but a much older motherboard and now the 3D application are working really really slow and the monitor keeps freezing for fraction of seconds, before changing to the next frame.
The previos motherboard used to display all the 3D applications fine.
Could someone give me the name/phone number for me to contact MSI Authorized personnel for/from Bangalore, India as I am not happy with the service provided by D-Link and feel cheated having bought a MSI product.
Thanks.

Quote
As far as I remember, the original motherboard in the bios setting had PCI-E frequency set to 200, I do not remember if the PCI-E frequency on that board started from 200 or ended at 200?
Sorry, but you must be mistaken. The defaul PCI Express Frequency is 100 MHz. Setting it to 200 would most certainly kill your board or the video card.
Quote
I do not find an appreciable performance boost when I take this setting from 100 to 170
Good lord, what are you doing there? Do not set the PCI Express Frequency to 170 MHz unless you want to blow something up.
Quote
If I set the PCI-E frequency at 200, the system hangs, there is no video on the monitor
That is normal. Please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup. Under no circumstances should you raise the PCI-E Frequency to 200 MHz. That's is what you do if you want to actually kill something.
I hope you are lucky and have not blown something to pieces yet.
Quote
Could someone enlighten me on the starting and ending frequencies of PCI-E on the latest motherboards MSI P7N Platinum 750i chipset.
The default PCI-E Frequency is 100 MHz on EVERY Mainboard. ... and that is also where it should stay.
Now, please provide full system specifications. Read the >>Posting Guide<<.
Quote
As you can see the replacement is much older.
As I already pointed out in my last post: This does not really atter. Check the PCB Version (it is printed onto the PCB, right next to the model Number (MS-7380). If that it is the same PCB Version, you received exactly the same board model.
Quote
I bought a MSI motherboard P7N Platinum (under 3 years warranty), based computer from the Microport shop, NR Road. I had a problem with this computer
What problem did you originally have?
Did you install the new board you got yourself or did the shop do that for you?

How do I load a vi of global variables whenever LabView opens?

I want to be able to load a VI with Global Variables whenever I open Labview, and not have it open dynamically. So in short, how do I bind or attach a VI to open every time LabView opens and starts up.

Look at this KnowledgeBase article:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/44e99cc41aa39f538625694b005679c0?OpenDocument

Bangalore, India - Printer after sales support is non existent

This is a rant about terrible after sales support in Bangalore, India from your authorized reseller.
We purchased a new photosmart plus recently after the older HP laserjet 3055 conked out. The older printer was to be repaired while we also agreed to purchase a new photosmart plus.
Its been a month since the laserjet was taken away for a suspected motherboard failure - we havent received it back yet.
And the photosmart plus: we've been facing repeated cartridge changes. The black ink cartridge is either unavailable or the service center is just lax in following up on our requests.
This forum post is just the culmination of a week full of calls and threats to the reseller - systech to send us cartridges and return the older laserjet.
At the moment - we've stopped all printing (4 days now) and terribly harried!

Click the "contact support" link toward the lower-left of that page and follow the instructions.
Regards.

Job Opening at Moog Bangalore, India

Hello Friends,
Moog Aircraft Group, Bangalore is looking for LabVIEW and TestStand Engineers with 2 to 5 years of experience in test automation field.
Please find the job description as mentioned below. If interested, please send the resumes to [email protected] or [email protected].
For more information regarding company and its product profile, please visit us at www.moog.com\aircraft
Job Description Is As Follows:
Candidate should have 2 to 5+ years of experience in using various NI tools such as LabVIEW and TestStand. Should be familiar with various NI toolkits and add-on modules.
LabVIEW and LabVIEW RT\FPGA proficiency (Desirable certifications include CLAD, CLD, CLA).
Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
Design, Development and Configuration of Automated Test Equipment (ATE) for complex systems\sub-systems, simulation and control system environments
Must be able to work with our global clients and lead the team.
Ability to work independently with our program focals for gathering requirements, preparing various test plans, coding & testing, Installation & support
Ability to understand the system and propose the custom signal conditioning circuitry to hardware team. Should be good in debugging hardware.
Candidate should have good communication skills, presentation skills and interpersonal skills.
Knowledge of Project Development Life Cycle
Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
Exposure to Avionic Communication Protocols is an added advantage (ARINC, MIL1553) dSPACE®, Python, Matlab® \ Simulink® knowledge is an added advantage.
Aircraft systems/sub-system testing verification and validation environments.
Knowledge of Aircraft Actuation systems is an added advantage Process Standards (D0-178\CMMI) is an added advantage.
Ready valid passport / VISA will be a plus point. Candidate may have to travel abroad depending on project requirements.
Regards,
Karthik SP

Hello Sir,
I am AV Seshagiri Rao a CLAD from hyderabad with a hands on experiance of Developing LabVIEW applications for various NI products for 2 Years. i am very much intrested in Moog. i have attached my Resume please kindly intimate me if any opening.
AV Seshagiri Rao
Email: [email protected]
Ph: 09703339903
Attachments:
resume.seshu.docx ‏47 KB

Texas Instruments position in Bangalore, India, JOB OPENING

TEXAS INSTRUMENTS, Bangalore is looking for a LabVIEW (3+ years) and TestStand (1+ years) programmer. Our section has developed a LabVIEW/TestStand based automated characterization environment to test complex 2.5 and 3.0G cell phone and other wireless ICs.
The right individual will be responsible for the following:
- Design and develop LabVIEW tests and tightly integrated TestStand sequences to perform complex, automated tests for mixed-signal, power management and RF blocks.
- Adding to a library of reusable test modules by identifying and developing common code blocks, utilities, and tests.
- Be a diligent user and promoter of Source Code Control (Perforce in this case)
- Assist characterization engineers with troubleshooting HW/SW interaction
- Be an integral part of the team but work with minimal supervision.
Requirements
Very strong LabVIEW is required with as much TestStand experience as possible.
Experience with GPIB Instruments and instrument driver development.
Database experience (SQL Server/MSDE) a plus.
Other skills like VB, C, and .Net development are not required but are considered a plus.
This person should have real-world test experience with excellent troubleshooting skills.
If interested please send your resume and contact information to:
Geeth Gopinath
Texas Instruments India Pvt. Ltd.
[email protected]

respected madam/sir,
I have come across the advertisement published in "Times Accent -28-Sep-2005for VLSI job". i have been working with Tata Institute of Fundamental Reserach for past 1 Year as a contract engineer, here i have got a chance to learnV.H.D.L. i have implemented V.H.D.L to Chip for Scientific team which help's to complete the Project of Turbo Molecular Pump Controller. Though i have'nt worked extensively on LabView i'm Sure that i can able to meet your requirement and i assure you that i'll complete my work sucessfully.
I have attached my latest CV along with this mail,
with regards
Suyog Uttekar
Attachments:
Resume1.doc ‏46 KB

LabVIEW Openings in Bangalore, India

Captronic System Pvt. Ltd., a Select Alliance Partner of National Instruments, specializes in the design and development of custom automated test, control and acquisition systems for R&D, design validation and production testing.
Captronic Systems is looking Electrical/Electronics/Instrumentation Engineers with LabVIEW experience. In addition to excellent package, we also sponsor our employees for certifications from National Instruments.
Please visit the careers section of our website for more details and send your resumes to [email protected] or [email protected] .

Dear madam.
This is sivaramkumar from Bangalore....i have Completed B.E in Electronics & Instrumentation eng....and i have 1 year Experiance in Automation Projects..Now i am Working under Lab VIEW develobment Data Acquistion from NI cards..I am suite for your recruit..i have enclose my resume in this forum..you can reach me as soon as....
Attachments:
Sivaramkumar LabVIEW.doc ‏59 KB

Cost of LabVIEW Exam in India and course details.

Hi
I am planning to take the LabVIEW exam, I want to know the cost of exam.
is LabVIEW Basics I and II manual are sufficient for the preparation of the
exam as we have have them in the LabVIEW Academy.
What is difference between LabVIEW Core I , II (mentioned in the syllabous material of CLAD Exam) and LabVIEW basics I and Basics II

Hi illa,
Ray is right, the best way to get pricing and scheduling information is to contact the NI India branch directly.
However, as to your other questions:
LabVIEW Basics is a previous version of the LabVIEW Training Courses. You can check the front of the manuals to see what version of LabVIEW the course materials cover, but I believe it is LabVIEW Version 8.5 or 8.6, which is about 4 versions back.
Because the certification exam tests over the latest version of LabVIEW, 2011 in this case, you will find a few differences- for example, the appearance of variables and boolean constants off the top of my head. You can go online on ni.com and search for "What's new in LabVIEW" and a number of links worth purusing pop up: What's New in LabVIEW 2011? What's New in LabVIEW 2011/features
However, I wouldn't spend too much time on this, as it will probably only impact a few questions.
When we moved from Basics to LabVIEW Core Training, we shuffled topics around for a better user experience. For instance: Event Structures used to be in LabVIEW Intermediate 1, but can now be found in LabVIEW Core 2. You will therefore what to do a topic comparison, as I describe below.
That being said, the LabVIEW Basics 1&2 manuals will still be a great way to familiarize yourself with the LabVIEW Programming environment. I recommend the following plan to prep for the CLAD:
Read through the LabVIEW Basics 1&2 concepts manual to familiarize yourself with the properties of LabVIEW objects and the proper terminology for things. For example, this will teach you that arrays are indexed from 0 and the red dot that sometimes appears on a terminal when you have a type mismatch is called a "Coercion Dot."
Work through the exercises and practice programming so you get used to the LabVIEW Environment and tools.
When you have completed that course compare the LabVIEW Core 1 and LabVIEW Core 2 Course Outlines, which lists the lesson titles, to the lessons in Basics 1&2. This should give you an idea of any topics you may be missing. A search on ni.com or in the LabVIEW Help should be able to fill in any holes. (event structure)
Finally, review the CLAD Preparation Guide's list of Topics and Subtopics to make sure you are familiar with everything you may be tested on.
After you know the material, this Discussion Forum has other posts on preparing for the exam. You can watch the Preparation webcasts and try the 2 Sample exams to get a feel for the type of questions you will be asked. And there are some helpful blogs we have listed.
Good Luck!
Mallori
Mallori M
National Instruments
Global Customer Education Program Mananger
Calculate the time you will save with NI Training

LabVIEW opening @ Bangalore, INDIA

Similar Messages

Maybe you are looking for