Labview proframmer needed-located in Singapore

Dear people,
Our company is in the test and instrumentation business located in Singapore. We are keen to look for LabView programmer with 2-5 years experience.
Please contact me at
[email protected]
All information treated in confidentially.

Hi,
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Similar Messages

  • LabVIEW programmer needed for full time position, Orange County CA

    Anaheim CA 92801
    [email protected]
    Job Title: Project Manager
    Job Type: Permanent
    Job Location: Anaheim CA
    Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)  
    Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
    Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
    40 hrs/wk at our Orange County facility.
    What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
    Salary Offered: $60K-80K based on experience and qualifications  
    The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
    Attachments:
    ETU and Staff.jpg ‏186 KB

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • LabView expert needed ASAP

    LabView expert needed ASAP to help complete a project. Specific skills
    needed are database connectivity experience with the LV Database
    Toolkit. Initial phase is approx. 15-20 hours of work with the
    potential for much more if we find the right person. Must be in Austin,
    TX for initial on site work.
    Job location is Austin, TX.
    Compensation: $50-75/hr

    Hello,
    My name is Robert Bohannon and I reside in the Denver, CO area. I’ve attached my resume for your review. I have been doing automated test system development for over 15 years and have been an independent consultant for over 5 years. I’m writing you to express my interest in your job posting in the LabView Job Openings Forum. I am currently looking for contract opportunities and I believe that my services could be of great value to you.
    Please review my resume and if you find any experience of mine that may potentially fit your job requirements, please let me know. I will provide references upon request.
    Thank you for your time.
    Robert Bohannon
    Attachments:
    resume.2006.05.21.pdf ‏315 KB

  • LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

    LabView "Guru" needed for the summer (4 month project)
    I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months.  Specifically, the ideal person will have the following:
    LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
    80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
    Printed Circuit Board experience a plus.
    4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
    The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr. 
    Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

    Sounds like Parker-Abex (LabVIEW 6.1 part)
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Houston LabView Programmer needed

    Houston, Tx LabView Programmer needed.
    We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227

    There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
    Thanks!
    LabVIEW Champion . Do more with less code and in less time .

  • I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
    - Dave

  • Certified LabVIEW Developer needed for an on-site project in Singapore (contract 15 - 24 days work)

    Hello Developers,
    Our client in Singapore (name of the MNC to be divulged to the interested candidates) has a project going on with us that involves NI OPC server & certain PLCs. The equipment is already supplied.
    We are looking for a CLD to do the LabVIEW programming on-site. If the work is satisfactory, there is a probablity of future projects to the developers.
    Interested? Please send CV to [email protected] including your CTC/ per diem rate. All interested candidates will be supplied full information so kindly email & do not reply here.
    Note: A valid CLD (or higher) certification is a must

    Hi
    I completed M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 22 months of experience with LabVIEW and have the follwoing skills.
    Intermediate-to-advanced knowledge of LabVIEW.
    Familiarity with data acquisition concepts and hardware.
    Ability to troubleshoot electrical and electronic systems at the module and equipment level.
    Discipline and organization with respect to software maintenance and version management.
    Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
    Ability to travel
    you can reach me at [email protected]
    Thanks & Regards
    Anil Punnam

  • Singapore Part Time Labview Programmer Needed

    Hi all,
    We are a Biomedical engineering company looking for  Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
    Interested parties please email me at [email protected] for further discussion.
    Warmest Regards
    TC
    Singapore.

    Hi,
     I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things.

  • Need job in singapore or shanghai

    Hi everyone, i am a chinese guy(SPR ), i have several years experence about labview,PLC, VB6.0,C++
    I am looking for job in singapore or shanghai, my contact is like below list:
    Phone: +06591204219,086-15221716302(SHANG HAI)
    Email: [email protected]
    I have business trip in shanghai and changzhou, hope receive your information, thanks.

    Kindly post this in the right location .
    This is for employers who post openings in their org.
    You  need to post your thread here in this forum.
    http://forums.ni.com/ni/board?board.id=JobSearch
    Sundar.

  • North New Jersey - LabVIEW Programmer Needed

    Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
    Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
    We currently have one opening in the Engineering department and are currently accepting Resumes.
    Please email your resume to:
    David Rosenthal
    Vice President
    Instrumentation Engineering
    http://www.ietest.com
    [email protected]

    I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
    John Wilson
    [email protected]

  • Labview Programmer needed for project work in Milwaukee Area or over the internet

    We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry.  These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound.   We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made.  Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture. 
    This position is not a full time position as of yet.  We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication.  We perfer to hire somebody local but if we cant we can can do this over the internet.  If you are interested, give us a reply with contact info.  Thanks.
    Regards,
    Bill

        Bill,
    We are able to offer you the help you need on
    this.  I work for a LabVIEW/test-system consulting group based here out
    of Salt Lake City...not too far if a quick trip is needed.  Among the
    six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
    contract work, local and remote.  This sounds interesting and right up
    our alley as far as experience goes.  I'd refer you to our website for
    further info about different projects that we've done for many
    clients.  www.mooregoodideas.com.
    If this seems workable for
    you, feel free to shoot me a note at [email protected]  I'd be
    curious to know more about what you're after and how we can help you
    out. 
    Thanks,
    Jim

  • Electrical Engineer with LabVIEW Experience - Needed Immediatel​y - Windsor, CO

    National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
    Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
    * Government
    * Aerospace
    * Nuclear, Fossil & Wind Power
    * Environmental Remote Monitoring
    * Defense
    * Medical
    * Oil & Gas
    * Manufacturing
    Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities. 
    Requirements:
    BSEE
    Proven electronic hardware design and development experience
    Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
    Embedded microcontroller programming
    FPGA programming
    Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
    Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
    Altium or similar electronics design package
    Demonstrated proficiency with LabVIEW
    Ability to solve complex technical problems independently
    Good verbal and written communication skills
    Ability to work in fast paced, high-pressure environment
    Please submit your resume via email to [email protected] . Please include professional references and salary expectations.
    Due to government contracting requirements, only US Citizens will be considered.
    Learn more about us at http://www.nationalanalytics.com
    No phone calls please.

    Hi
    I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
    Intermediate-to-advanced knowledge of LabVIEW.
    Familiarity with data acquisition concepts and hardware.
    Ability to troubleshoot electrical and electronic systems at the module and equipment level.
    Discipline and organization with respect to software maintenance and version management.
    Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
    you can reach me at [email protected]
    Thanks & Regards
    Anil Punnam

  • Does SIRI need location service switched on

    Hi,
    I am trying to sort my location services out... Does SIRI need this to be switched on ?
    Thanks

    ONly in the US..  I read in other discussion that it will be available next year in the UK>

  • LabView Developer needed in Kyle (far South), Austin

    Xtreme Power Solutions www.xtremepowersolutions.com delivers
    integrated smart power management solutions from 500kW to 100MW.​
    Proprietary solid-state power management and integrated storage enables
    efficient and available power for an environmentally sound 21st century
    electricity industry.​
    We are looking for a talented,
    resourceful, and highly-motivated LabVIEW software developer.  He/she will
    be required to serve on a team of LabVIEW developers that is responsible for
    developing and maintaining the company's energy storage SCADA systems.  He/she
    will also be required to play a role in defining and realizing customer
    specific software requirements.
    Qualifications
    5+
    years of experience developing automated test, measurement, data acquisition,
    and control systems.
    5+ years of designing, developing,
    implementing, and debugging LabVIEW and LabVIEW RT software.
    Technical
    requirements - Hardware
    Broad knowledge of instrumentation and data
    acquisition technologies including PXI, NI Data Acquisition, LabVIEW Real Time,
    NI FPGA, and signal conditioning.
    Strong hands-on hardware troubleshooting and
    debugging skills.
    Technical
    requirements - Software
    Experience using Source Code Control Systems
    like Subversion (SVN) and TortoiseSVN.
    Familiar with software communication protocols
    such at TCP/IP, UDP, and modbus.
    Familiar
    with all current LabVIEW application architectures.
    Experience
    connecting LabVIEW to third-party database systems such as MySQL.
    Strong background in architecture design and
    development.
    Outgoing personality with good communication
    skills, both written and verbal.
    Experience creating documentation for large
    scale LabVIEW projects spanning VI descriptions to system diagrams.
    Experience writing software requirement
    specifications.
    Bachelor
    of Science (BS) in Mechanical or Electrical Engineering. Masters of
    Science (MS) a plus.
    National
    Instruments Certified LabVIEW Developer (CLD).
     Must be a US Citizen or Permanent Resident.
    Preference is
    given to local candidates.
    Email resumes
    to [email protected]

    Dear Sir,
    I would like to introduce myself over here. This is Vimal R. I had experience of 4 years in the instrumentation field .
    Now I am looking for a change from my current assignment in india as well as  foreign countries in the same field (instrumentation).Here with i have attached my CV. Please find it . I have enclosed my expectation and other details below in short.
    Expectation and details :
    Field: Instrumentation.
    Experience:  4 Years, in lab view development,  NI related hardware's, and other hardware.
    Skills: Labview 7 to 2009, DIAdem, Test Stand,Machine Vision, Embedded Labview, Embedded C,C.
    Certification: CLAD (Lab View Certification), CLD appeared.
    Award Won: Rajapuraskar award, Rastrapathi Award in scouts,and  Star fish Award @ 2008 and 2009 in apna technologies.
    Expected CTC: 6-7 Lakhs/ Annum (in india), Negotiatable for abroad.
    Current CTC: 4.2 Lakhs/ Annum,
    For more details please look at the resume, and do the needful.
    Contact me on: 09590580872
    Email ID: [email protected]
    Thanks and regards,
    Vimal.R.
    Attachments:
    4 year Experience CV_v02.doc ‏73 KB

  • Labview hijacking file locations! Help!1

    Hi,
    I have been using Labview for about a year and still can't figure out how
    to turn off this tendency for Labview to pick its own paths to VI
    locations.
    Like most programmers of the early days, I like to back up my working
    subroutines (or VI's) to back up directories that are untouched by anyone
    and anything.
    For some reason, Labview tracks file saves done by windows explorer and
    will change its path to a VI just because you copied the file to another
    directory. (Even when Labview is not running!!!)
    This is a big problem for me and makes it extremely difficult to maintain
    software on machines that are in remote locations.
    My question is "How do you prevent Labview from tracking your file saves
    in Windows Explore
    r??"
    I would like to fix this problem on a low level in an .ini file or
    something and not do this "run around" with renaming directories and
    trying to fool Labview.
    As an experienced old timer programmer...this is extremly annoying and
    I've asked this question before and never got a descent response.
    Sorry to sound angry, any help is appreciated.
    I have the latest versions of Labview.
    Thanks,
    JT

    "Olivier B" wrote in
    news:419b8de3$0$278$[email protected]:
    > Hi,
    >
    > Try to delete in the Tool->Options->Paths->Vi Search Path.
    >
    > For more tips on paths for LabVIEW, read the "Paths Options Page" in
    > the LabVIEW help.
    >
    > Hope it is helpfull.
    >
    > Olivier B.
    > "JT" a écrit dans le message de news:
    > [email protected]..
    >> Hi,
    >>
    >> I have been using Labview for about a year and still can't figure out
    >> how to turn off this tendency for Labview to pick its own paths to VI
    >> locations.
    >>
    >> Like most programmers of the early days, I like to back up my
    >> working subroutines (or VI's) to back up directories that are
    >> untouched by anyone and anyt
    hing.
    >>
    >> For some reason, Labview tracks file saves done by windows explorer
    >> and will change its path to a VI just because you copied the file to
    >> another directory. (Even when Labview is not running!!!)
    >>
    >> This is a big problem for me and makes it extremely difficult to
    >> maintain software on machines that are in remote locations.
    >>
    >> My question is "How do you prevent Labview from tracking your file
    >> saves in Windows Explorer??"
    >>
    >> I would like to fix this problem on a low level in an .ini file or
    >> something and not do this "run around" with renaming directories and
    >> trying to fool Labview.
    >>
    >> As an experienced old timer programmer...this is extremly annoying
    >> and I've asked this question before and never got a descent response.
    >>
    >> Sorry to sound angry, any help is appreciated.
    >>
    >> I have the latest versions of Labview.
    >>
    >> Thanks,
    >>
    >> JT
    >
    >
    >
    Olivier,
    Thank you very, very, very much!!
    This problem has plagued me for a year
    and your suggest
    ion fixed it.
    Thanks again,
    JT

Maybe you are looking for