LabVIEW Programmer​-ISRO-INDI​A Look a job......
Dear sir,
I am a Engg.Grad working in Indian Space Research Organaisation(ISRO),INDIA for past 2+ yrs.My Responsibility is Design and Develop a Test routine for Spacecraft Propulsion Systems using LabVIEW,LabWindows/CVI,GPIB,Serial and PXI Technology and I also involved SCADA Development.Is any body help to me to get a job?
Hi
please mail me ur lastest CV to [email protected]
Thanks
Similar Messages
-
3 years exp. in LabVIEW,ATE....looking for job.
thats it for now....
Attachments:
vivek's resume.pdf 44 KB我们现有一项目需聘兼職LabVIEW工程師, 有意请电邮:[email protected]
-
I am looking for LabVIEW programmer job.
I am LabVIEW programmer with 6 years experience.
My expertise is optical communication, signal/image processing, C/C++.
I am living at Israel.
T.U in advance
Nadav Chernin
[email protected]It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
Parts of California are also looking hot. I just got this from my net-temps search agent:
1. Software Design Engineer
CA Valencia 6 - 9 months
http://www.net-temps.c
om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XSLN
2. Sr. RF Test Engineer (San Diego)
CA San Diego 0 - 30 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt278/300278-3074-13-72416
3. Lead Test Engineer
CA Torrance 12+ months
http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53706XJDC
4. Lead Engineering 3
CA Torrance 180 - 365 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt272/300272-1063-13-72458
Good luck,
- Kevin -
Labview Programmer Job Opening - Santa Clara, CA
Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o Must be well
organized and enjoy working in a dynamic environment.
o Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]Labview Programmer
-
Experience​d Labview Programmer Needing Job in US
Hello,
My name is Rollin, I have been working in for a European research facility in
Grenoble, France as an Electronics Engineering Technician for 8 years.
I have 3 years Hands on experience with Labview, for instrument control and
data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
relocate anywhere in the US If someone hires me. I have enclosed my resume here
after.
Thank you for your time and consideration.
INSTRUMENTATION LABVIEW SPECIALIST
Mr. Rollin S. McCarty
4941 Central Drive, Apt. 705,
Stone Mountain, Georgia 30083
Phone: 770-413-4092
E-mail: [email protected]
PROFILE
Broad knowledge of control systems, electronics and instrumentation.
Labview Programming Expert (3 years hands on experience).
Excellent Documentation skills.
Bilingual French-English. US Citizen.
DETAILS
Hardware:
Design, development, installation and maintenance of PC based automation
solutions used in the fields of data acquisition, motion, process and
instrument control. Includes analog & digital circuit design, use of
electronics CAD simulation tool (SPICE), together with general purpose
electronic test equipment.
Software:
Design, development of Labview software, including low level instrument drivers
- using serial and HPIB protocols, plus various I/O analog and digital
interfaces - data processing and program logic, as well as menu driven user
friendly GUI.
Documentation:
Production of comprehensive yet attractive and understandable documentation.
HTML skills. MSOffice.
EXPERIENCE
European Synchrotron Radiation Facility, FRANCE
Computer & Electronics Engineering Specialist,
1991- 1999
Provided scientific research institute survey team using a large variety of
state of the art survey equipment with turn-key automation solutions, leading
to an increase in quality as well as in quantity of the production.
Caterpillar, FRANCE
Mechanical Methods Specialist,
1989- 1991
Training and support of fifteen mechanical computer draftsmen for their
corporate CAD tool. Provided manufacturing shop information regarding new
technologies.
Caterpillar, FRANCE
Electrical & Mechanical Technician,
1988- 1989
Preventive and break down maintenance of bulldozer girder welding robots and
associated machinery.
EDUCATION
Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
Esrf, Grenoble, France - Labview, 40 hour training, 1996.
French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
French equiv. to AS/BS, Grenoble, France - Electronics, 1988.You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]
-
Job oppurunities for Labview developers in India
How is job oppurunities for Labview developers in India?
There are two job boards available. This forum is explicitely for help when programming Labview.
If you are posting (offering) a job, visit this forum: http://forums.ni.com/ni/board?board.id=JobPost
If you are looking for a job, then visit this forum: http://forums.ni.com/ni/board?board.id=JobSearch -
We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter -
Young labview guru with B.S. degree looking for job in mid-atlantic region
Hello,
I recieved a B.S. degree in materials science engineering from cornell university in december '04. I am currently working as a materials engineer but I am looking to make a switch to a job that will make better use of my programming / LabVIEW talents. I am looking for something in the Mid-Atlantic region or New England.
Please email me at [email protected] and I will gladly send you my resume. Feel free to call me at 412.874.8740 with any other inquiries.
Thanks,
-Zach SamuelsInstrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected] -
LabVIEW Programmer​s needed in Detroit
Greening is looking for multiple LabVIEW programmers with some experience. Below is our job description. You can contact me directly at [email protected]
LabVIEW Developer / Design Engineer
Job Description
The LabVIEW developers at Greening work in a cross functional team environment under multiple Certified LabVIEW Architects that guide and train the developers. Developers spend the majority of their time programming Test and Automation applications in LabVIEW™. Developers also participate in the system design including the selection of sensors and data acquisition hardware. Developers are required to travel for the commissioning or startup of their projects.
The successful candidate will be a motivated fast learner as this is a fast paced and growing group. Developers will be tutored through the National Instruments certifications for LabVIEW. This is an ideal position for a programmer or engineer that is seeking to become an expert LabVIEW programmer.
Education Preferences: BSEE, BSCE, or BSME
Experience in the any of the following technologies is helpful:
Hardware: National Instruments PC Based DAQ, FieldPoint, PXI, IOTech DAQ, Embedded Controls, Industrial Computers, sensors, and wiring
Software: LabVIEW, TestStand, Visual Basic, CAD programs (AutoCAD, TurboCAD)
Integration: Data Collection, Motion Control, Real-Time Embedded Systems, Machine Vision, Industrial Automation, Distributed Control Systems, Database Design, SCADA Systems, Sensor Selection, Signal Wiring MethodsDear Sir/Madam,
This is in reference to your mail regarding job vacancy at your esteemed organization. This kind of opportunity, which I am eagerly waiting for. I am very confident that I can prove my excellence if I get an opportunity in your organization. Being an enthusiastic engineer, I look forward to working with your organization, where in I undertake to put my abilities, skill set and experience as an input and the growth of my career and company name and profits as my output.
I have a sound and 4+ years of constant exposure towards Software Development in LabVIEW and TestStand.
I am a Masters graduate in Electrical Engineering and I am Certified LabVIEW Associate Developer (CLAD). Expertise programming with hardware interfaces like VISA, GPIB, PXI, USB...etc and I offer myself with flexibility in working and relocation is not a constraint for me.
Presently I located in Germany and working with National Instruments selective Partner company. I am very much enthusiastic to relocate to USA.
My resume is available upon request. Please mail me at [email protected] I will be at your convenience.
Thanking you Sir/Madam,
With Kind Regards,
Sashidher Gundogi -
Electrical Engineer with automated test experience looking for job in San Antonio Area
I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406. -
Part time Labview programmer NEWARK, DE
looking for a labview programmer to complete some small jobs. must be familiar with motorized stages, CCD imaging analysis, data handling. More work possibly to follow.
Hi,
This refers to your requirement for LabVIEW programmer in Newark, DE.
If you need the
latest in virtual instrumentation technology with a team to help with the details of the system
or if your company has been using LabVIEW and you need a team of experts to
develop for you then consider us. We offer the most competitive rates and the highest quality of service available. We can provide a LabVIEW consultant on-site and with the aid of
our engineering team and state-of-art R&D facility your company’s software issues will be
a thing of the past and you will be operating like clock work.
Please reply to this message and let us have your contact details so we can quote you. Be assured, there is no need to compromise on quality and deliverables in order to cut costs!
Best,
Aum -
Singapore Part Time Labview Programmer Needed
Hi all,
We are a Biomedical engineering company looking for Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
Interested parties please email me at [email protected] for further discussion.
Warmest Regards
TC
Singapore.Hi,
I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things. -
Looking for job in UK (london)
Could you recommend me sites like creativeheads or simmilars?
Thanks a lot.
Any suggestion will be welcome.I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406. -
Internship (Caterpillar Chennai): LabVIEW programmer
Caterpillar India Pvt Ltd., is seeking an engineering student for a internship. The position will involve development work on Labview programs and Automation Scripts with our Test Executive Software. This position involves developing new features, improving, reviewing, and de-bugging existing code, testing code, and Script Development.
If intreseted, Kindly email me your resume: [email protected]
Thanks,
Muraledharan RHi Sir/Madam,
I recently Completed my PG Diploma in Industrial Automation and System Design from
National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.
I've deep knowledge in PLC, SCADA, NI-LabVIEW (core 1 & core 2) Applications. I am good labVIEW Programmer and I am seeking job in labVIEW Sector and also I have intersted internship.
please help me where i could get the job/internship programs in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146 -
Keen Labview Programmer Wanted
A Keen Labview Programmer is wanted to work in Formula1. I am leaving at the end of October, and the replacement has fallen through.
You must be a competant Labview Programmer, and ideally have knowledge of Data Acquisition, and Control Systems. Ideally an Aerospace or Autosport background.
The Company is Force India F1 Team based in Silverstone UK.
Thanks,
Rob
Solved!
Go to Solution.Please post here: http://forums.ni.com/t5/LabVIEW-Job-Openings/bd-p/JobPost
Maybe you are looking for
-
M9500y performanc​e degredatio​n and hard drive failure ?
I have a m9500y that is reporting all sorts of performance boot issues in Vista. I do not know what to expect, read this post and let me know what you think. TIA! The new drive has been successfully restored and runs the O.S., I even have managed to
-
I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!! I really need this issue r
-
Getting error while uploading data to the CCM thru excel file.
Hi while uploading supplier data to CCM i am getting error " The destination FXP_HTTP_ADAPTER has not been maintained! (see long text) " Error when sending to SAP XI; upload canceled ". FXP_HTTP_ADAPTER (Production) - is not maintained in SM59 tra
-
ORA-01152 when restoring from RMAN backupset in NOARCHIVELOG mode
Hi all, I got the error ORA-01152 when I tried restoring an Oracle 10g R1 database from an RMAN backupset into a new server. The error returned when it reached to the level of opening the database in resetlogs. The database runs on NOARCHIVELOG mode
-
Hi experts I have the the following scenario For shopping carts fron catalogs and with material number assigned my scenario is ECS, so if the shopping carts is complete after aproval a Po is created and replicated to R/3, if the shopping cart is inco