LabVIEW programmer needed for full time position, Orange County CA
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg 186 KB
Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim
Similar Messages
-
Labview Programmer needed for project work in Milwaukee Area or over the internet
We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry. These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound. We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made. Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture.
This position is not a full time position as of yet. We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication. We perfer to hire somebody local but if we cant we can can do this over the internet. If you are interested, give us a reply with contact info. Thanks.
Regards,
BillBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
Looking for full time position using Labview and/or PLC's in Long Island NY area
I have 13 years experience using Labview for user interface/daq applications. I also have 20 years experience with Programmable Logic Controllers (PLC) programming for industrial machine controls. My resume follows:
Adam Wechsler
111 Holbrook Rd.,Holbrook,NY 11741,(631) 981-1013 [email protected]
Objective
Labview programming, virtual instrumentation, industrial machine controls,
automation, PLC, HMI, GUI, data acquisition
Education:
B.S. Mechanical Engineering 5/89
Polytechnic University, Brooklyn, NY
A.S. Engineering Science 5/86
Suffolk Community College, Selden, NY
(GPA 4.0 Dean's List Spring 1986)
Experience:
Controls Engineer 5/1994-3/2009
Vacuum Instrument Corp., Ronkonkoma, NY
*Program, troubleshoot, and upgrade automated Vacuum Chamber Industrial Leak Detection systems controlled by Allen Bradley PLCs in an OEM environment.
*Debug equipment functions and programs prior to shipping, at customer's site, and by phone.
*Integrate and install various types of peripheral equipment, barcode scanners and printers,
*Design and develop Labview graphical user interfaces and HMI applications including recipe management and data collection for industrial machinery.
*Write and review user manuals and installation instructions.
Production Engineer 10/1989-5/1994
Izumi Corporation, Yaphank, NY
*Program, maintain, troubleshoot, and repair PLC controlled hydraulic, pneumatic, and control systems for automation in a hands-on environment.
*Improve design for manufacturability of new products and prototypes to be urethane/injection molded.
*Program, maintain, troubleshoot, and repair six axis hydraulic paint spraying robots.
*Create interface between multiple PLC’s and central computer system.
*Improved design and productivity of high volume, computer controlled, robotic molding machine by 150%.
Consulting Projects:
*Created Labview user interface components, and recipe management system for the testing of motion control servos.
*Programmed Allen Bradley PLC machine logic for packaging machine for a food service supplier.
*Created Labview to Allen Bradley PLC setpoint and monitoring interface for electric motor-starter test stand.
*Programmed Allen Bradley PLC and PanelView operator interface terminal for cosmetic packaging assembly machine.
*Developed Labview application for Fourier and statistical analysis of myogram biomedical data for researching the efficacy of acupuncture treatment.
Other:
*Attended National Instruments Labview training courses, and regularly attend local Labview Users Group meetings as a long standing member.
*Member IEEE
*13 years experience with Labview
*15 years experience with vacuum chamber, mass spectrometer, and related technologies
*20 years experience with PLC's and automated systems
*Attended Autocad training course.
*Willing to travelWill also consider contract, part time, or consultant work.
-
UK Based company seeking experienced LabVIEW Developer for Full Time Position
· High level of experience and competence with National Instruments Labview versions 7 & 8 and other National Instruments software and hardware products
· Competence in Microsoft Visual C++, Visual Basic
· A good working knowledge of a range of networking and communication systems and protocols including: Ethernet (all varieties), RS232, RS422, RS485, MODBUS, CAN
· Experience with the design of control and monitoring systems for safety critical systems in offshore oil applications
· Design, development, implementation and maintenance of software for both in house use and distribution· Development and maintenance of software design and test specifications and associated documentation
· Verification and validation of software and associated systems (hardware and software)
· Management of software development process, applications tools and source code, thereby ensuring conformity with the company’s accredited ISO9001:2000 quality system
· Management of software version control and releases
· Customer support for products (principally for software related issues)
· Design and development of Control System Graphical User Interfaces, and implementation of software aspects of system functional requirements through the use of standard software packages, and system configuration.
Contact Tim or Caroline on 01751 433100 or email [email protected]Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation. -
Signal Processing and LabVIEW Expert Full Time Position – London, UK
1x Signal Processing and LabVIEW Expert - Full Time Position – London, UK
1.0 Description:
As a Signal Processing/Software Engineer, you'll be part of a team that is responsible for developing applications based on large high speed data analysis for a large green energy project. Your skills must include a knowledge of Waveform analysis and understand the concepts of cross correlation, Fourier Analysis, Spectral analysis and other similar items.
The position ideally requires someone of CLA level of LabVIEW program to act as the project lead on the programming and technical levels of the system.
2.0 Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Understanding of the data acquisition side of the system and previous experience using National Instruments hardware and DAQmx
◦ Knowledge of Power engineering, Volts, Amps, current, Power Factor etc.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦ Reproducing and troubleshooting problems and incompatibilities.
◦ Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦ Ability to project manage and understand how to keep on track with a Microsoft project based externally monitored project.
3.0 Qualifications & Requirements:
◦ Minimum second class higher honours degree in engineering or science related field, such as electronic engineering, physics, mechatronics or computer science.
◦ Basic Knowledge of text based programming languages.
◦ Experience in either LabVIEW, minimum of three years full time and at CLA level, or capability to reach there in a short space of time with the relevant training.
◦ Experience in a second language such as JAVA, C and C++ is strongly preferred.
◦ Have a vast experience of signal processing, both digital and analog.
◦ Although not required, but must have skills to pass the Certified LabVIEW Developer exam and CLA within the year.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Knowledge in instrumentation & control, and industrial automation, is strongly preferred.
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦ Excellent written, oral and presentation skills are key.
◦ Ability to deal effectively with customers to make them successful is essential.
◦ Ability to get along with others and function as a team player as well as work effectively alone.
◦ A proactive/can do attitude is vital and a positive outlook on problem solving.
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full valid UK driving license.
4.0 Location:
This role is located in London, UK
5.0 Reporting:
Signal Processing Engineers will report to the Technical Director.
6.0 Salary:
Competitive salary based on level of experience.
7.0 Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Signal Processing Engineer in the email subject.Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation. -
2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK
2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0 Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0 Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦ Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦ Delivering professional and high quality, customer education courses.
◦ Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦ Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Travel 50% of the time.
3.0 Qualifications & Requirements:
◦ Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦ Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦ Understanding of object oriented principles.
◦ Ability to pass CLA exam within the year.
◦ Knowledge and experience in instrumentation & control, and industrial automation is required.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦ Excellent written, oral and presentation skills are key.
◦ Ability to deal effectively with customers to make them successful is essential.
◦ Ability to get along with others and function as a team player as well as work effectively alone.
◦ A proactive/can do attitude is vital and a happy view on life.
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license.
4.0 Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0 Reporting:
Systems Engineers will report to the Technical Director.
6.0 Salary:
Competitive salary based on level of experience.
7.0 Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx 18 KB -
Test Engineer (electro-optical) full-time position in Los Angeles
I'm a recruiter working with OSI Optoelectronics and we are looking for a Test Engineer to design, build, modify, repair, troubleshoot and debug optoelectronic test systems.
This is a full-time position located in Hawthorne CA.
Must be US Citizen or Permanent Resident.
Responsibilities:
- Design and develop test fixtures, tooling, software programs, and procedures for specific products to verify products compliance to specifications.
- Validate, maintain and monitor metrology lab equipment and tooling for diodes calibration and ensure test measurement accuracy meets production requirements.
- Maintain scheduling of vendors for fixturing, program delivery, and interface and train technicians on procedures, process and repair.
- Customer interface on all test issues.
Qualifications:
- BS in Electrical Engineering, Physics or equivalent
- 2-5 years experience in optoelectronic testing or related field.
- Good understanding of metrology methods.
- Experience with optics and /or knowledge similar background is required.
- LabView programming experience.
Compensation: $55,000 - $75,000 + employee benefitsHey Kmagel,
My name is Jerry Downing and I am an experienced RF system test engineer with extensive experience in hardware (i.e test sets, RF test drawers, PCB...etc.) and software test solution design and development. I have developed calibration and test routines (for mobile and base station applications of the UMTS WCDMA GSM and EDGE applications) in Labview, VB, VB.NET and TestStand. I am experienced in managing test solution development, contractors, contract manufacturers, and product line transfers. I have also completed PMP (Project Management Professional) training.
I have a consulting company named Downing Automation Consulting (DAC) in your area that focuses on automating test processes. I wanted to see if I might be able to speak with you further about your test needs. Please take a look at my web page when you have time. It lists some of my experiences. I would like to speak to you further about the specifics of what are the current and future needs at OSI Optoelectronics.
www.downingautomation.com
Thanks again for your time and Happy Holidays,
Jerry ([email protected]) -
Houston LabView Programmer needed
Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time . -
Full Time Position interview questions and answers Please .
Hi Experts,
Please any body send me SAP HR Consultant full time position initial interview questions and answers for me? Including behavioral questions and answers?
Thanks and I appreciate your time.
Regards- Zubair.https://forums.sdn.sap.com/click.jspa?searchID=9788674&messageID=4892316
-
LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI
LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
So yeah, pretty much what the title says... Is there anyway to fix it? Like I said, ALL of the other songs play for full time. All but that one song.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
LabVIEW Programmer Full Time Position, Livonia, Michigan - Join are team of programmers
LabVIEW Programmer POSITION
Revolutionary Engineering, Inc. is dynamometer testing systems integrator and services company. We provide systems and services for the automotive industry as well as in-house dynamometer testing. We currently have a position open for a LabVIEW Programmer. A brief description of the positions responsibilities and benefits are summarized below. If you are interested please e-mail me at [email protected]
Position Available
Full Time LabVIEW Programmer
Requirements
Bachelors Degree
LABVIEW programming experience, CLD a plus
AutoCAD Experience a plus
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
LabVIEW Programming
Control System programming and interfacing
Design and build assistance on dynamometer systems
Electrical and mechanical print review
Benefits
Paid Vacations
Full Medical
Paid Sick Days
Competitive Salaries
Please check out our website at www.revoleng.com
regards,
Daniel E. White
Revolutionary Engineering, Inc
36865 Schoolcraft Rd
Livonia, MI48150Dear Sir,
I learnt about your need for LabVIEW Programmer from your company’s website. I am interested in this job profile which is mentioned in your website. Moreover I aspire to work in a technical company of my field.
I believe that my LabVIEW knowledge and my education background are appropriate for your requirement , I am attaching my resume for your consideration.
Thanks in advance.
Regards,
Devi S.
Programmer analyst trainee,
Cognizant technology solutions,
Chennai.
PH: 91-09789069507
Attachments:
Devi_Sadasivam.doc 48 KB -
Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers
Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam -
Web Developer needed in Louisville, Kentucky - Full-time Position
Hey guys and gals! This is a real job - not a contract job,
not a freelance job, but a real full-time paid job in a
professional office.
So if you are wanting to settle down and make a consistent
wage and have some fun coding, then give me a yell. Must be willing
to move to
Louisville, Kentucky (USA) area. Serious inquiries only.
We are a small but quickly growing company. We have many web
development projects in the pipe and many coming down the pipe. We
are
looking for a solid Flash Animation / Actionscript / PHP /
MySQL programmer with osCommerce / CRE Loaded experience
(preferred).
We would also like a candidate to have experience with:
1. Relational database knowledge
2. SQL Syntax Experience
3. HTML and CSS Web Layout
4. Flash 8 (ActionScript 2.0)
5. ASP (Classic 3.0)
6. PHP
We would also prefer experience with:
1. ASP.NET 2.0
2. Database Engines: MySQL, MS SQL Server, Access
3. Visual Basic
4. XHTML / CSS Advanced Layout
5. Access Database Programming (VBA)
6. Photoshop (basic usage and slicing)
7. Windows Server 2003 & IIS 6
General Skills and Abilities:
- Communicate with clients on a technical and non-technical
level.
- Basic project management skills (ability to organize tasks
and communicate status, timeframes, and changes needed).
- Ability to work with little to moderate supervision.
- Ability to self educate and learn new techniques and
skills quickly.
- Ability to work in fast paced, casual environment where
tasks and priorities may change from day to day.
- Must be reliable and dedicated with a high work ethic.
- Ability to be professional around clients and have fun
when not.
- Able to lift up to 55lbs.
- Able to sit for long periods of time.
- Able to view computer screens for long periods of time.
- Able to use computer input devices such as keyboard and
mouse.
- Able to easily communicate with clients via e-mail,
telephone, or written methods.
- Some travel may be required to meet with clients to
discuss projects. Mostly local, but may have some overnight stays
(rare).
We may offer moving expenses on a case by case basis.
Day to day overview:
A normal day would consist of arriving at the office and
being prepared to work at 9am (Monday through Friday). Your task
list will be
created for that day or week (whichever makes sense). You
will work through the task list until completed.
Tasks will be taking a web development project from start to
finish. Setting up the web server, creating the database structure,
coding any
programming necessary. Also will assist with general web
development tasks such as slicing a web design in Photoshop,
creating the HTML layout of the website, changes to existing
websites, etc.
Flash animiations, flash video production, and Actionscript
programming will also be performed by this position.
We are a small, but growing company, so other duties may be
requested to help fill in gaps where needed. We pride ourselves on
customer
service and being responsive to our clients. A positive, "can
do" attitude is required.
There will be a lot of freedom and opportunities to help
improve the organization and how projects are completed. We are
growing rapidly,
so opportunities for professional growth and promotion will
be given to staff that go above and beyond and show initiative.
Some overtime will be required to meet deadlines and keep
project workload under control.
About Media Marketers:
Formed in 2001 as an advertising and promotional company,
Media Marketers has found a niche and grown in Web Development,
Video Production,
and Marketing. Our office is located in the heart of the
Bluegrass Industrial Park on the east side of Louisville. This
location allows us
quick access to many resources. Our work environment is
casual, open, friendly, and caring. We are a small company and
value our staff's
creative ideas. We strive to push the web development and
marketing envelope with solid technologies and highly creative
designs and ideas.
We educate our clients on technology and marketing and help
them improve their image, streamline their workflow, and
disseminate
information.
Anyone qualified, interested, and hard working should send a
resume and cover letter to:
[email protected]
or
Careers
Media Marketers, Inc.
1808 Cargo Ct
Louisville, KY 40299
Website: www.MediaMarketers.com
No phone calls please. Equal Opportunity EmployerHi,
Is this still available? Current location Captain Cook -
S.Kona. 8 yrs CF/SQL etc.
Thanks -
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric
Maybe you are looking for
-
I installed CS6 and can not package a document in InDesign that I was able to package before. Pop up widow "Cannot copy nessessary linked file(s)"
-
How can one set a default location for the pictures on the hard drive?
Since Windows normally places the pictures on a typical drive as "My Pictures" about four or five levels down from the root, any effort to import picture files into Lightroom requires multiple clicks to drill down to the "My Pictures" then (for examp
-
Serialnumbers, stock transfer and outbound delivery.
Hello gurus I am trying to figure out how to best handle material with serialnumbers, and stock transfers between storagelocations. The first problem is that when we have confirmed the serialnumber and packed the goods and recived a HU for this the o
-
my itunes program keeps telling me that i do not have the write access for my itunes media folder or a folder within it, what should i do to get permissions?
-
Exception in PFHashTable (Analysis Services 2012 SP2 CU5)
Hi All, First af all please note that this is a cross post from the partner network. I will update the post if/when there is a reply and vice versa. I am facing an problem with a SSAS Server throwing exceptions about 10-20 times a day. Analyzing t