LabView programmer needed to develop VIs for two immediate projects in Belmont NH, apply ASAP.
Projects are relatively small: first one is for a testing machine with data aquisition and control, second is a file storing project.
Dear Sir,
I have been working in development of various project in LabVIEW since more than 5 years. I am attaching my resume with this.
Please do send the project details and requirement, then only we can discuss about pricing and other things.
Thanks & regards,
Rajendra Gaikwad
+91 9663398272
Attachments:
Rajendra Gaikwad CV.doc 110 KB
Similar Messages
-
LabVIEW programmer needed for full time position, Orange County CA
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg 186 KBBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
Houston LabView Programmer needed
Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time . -
I need to program Striomx for two Toshiba Satellite l645-s4055
I need to program Striomx for two Toshiba Satellite l645-s4055
Is there a Toshiba Satellite l645-s4055 Estreomaks program searched for the download link compatible Estreomaks program with two you can not find I want Estreomaks download link is compatible with computer Thank you
Device Information
Windows 7
toshiba satellite l645-s4055
modl no. psk0GU-034026tot1429 wrote:
I need to program Striomx for two Toshiba Satellite l645-s4055
... compatible Estreomaks program
Did you misspell a couple of words “Striomx” and “Estreomaks”? I did not find those words when I Google them. Do you mean stereo mix? I did find your model though and I see that it has a Conextant sound card. Here are 2 methods presented by posters on this forum to incorporate stereo mix with Conextant sound card.
http://forums.toshiba.com/t5/Audio-Sound/How-to-get-stereo-mix-on-a-Conexant-sound-card/td-p/448001
http://forums.toshiba.com/t5/Audio-Sound/How-get-Stereo-Mix-on-Conexant-sound-card-SOLUTION/m-p/1746... -
I lost my iLife DVD and need to download iDVD for a school project! I didn't mean to uninstall it!!! Where can I get it!!! Some one smart about iDVD please save me! Thank you.
Hi
If You lost it - You need to get a new one. There are no free or legal downloads AT ALL.
• Second handed from e-bay
• See if Amazon - got any boxed iLife'11 DVDs left (cheque that iDVD is included)
Apple do NOT sell any more.
Yours Bengt W -
Experience​d Labview Programmer Needing Job in US
Hello,
My name is Rollin, I have been working in for a European research facility in
Grenoble, France as an Electronics Engineering Technician for 8 years.
I have 3 years Hands on experience with Labview, for instrument control and
data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
relocate anywhere in the US If someone hires me. I have enclosed my resume here
after.
Thank you for your time and consideration.
INSTRUMENTATION LABVIEW SPECIALIST
Mr. Rollin S. McCarty
4941 Central Drive, Apt. 705,
Stone Mountain, Georgia 30083
Phone: 770-413-4092
E-mail: [email protected]
PROFILE
Broad knowledge of control systems, electronics and instrumentation.
Labview Programming Expert (3 years hands on experience).
Excellent Documentation skills.
Bilingual French-English. US Citizen.
DETAILS
Hardware:
Design, development, installation and maintenance of PC based automation
solutions used in the fields of data acquisition, motion, process and
instrument control. Includes analog & digital circuit design, use of
electronics CAD simulation tool (SPICE), together with general purpose
electronic test equipment.
Software:
Design, development of Labview software, including low level instrument drivers
- using serial and HPIB protocols, plus various I/O analog and digital
interfaces - data processing and program logic, as well as menu driven user
friendly GUI.
Documentation:
Production of comprehensive yet attractive and understandable documentation.
HTML skills. MSOffice.
EXPERIENCE
European Synchrotron Radiation Facility, FRANCE
Computer & Electronics Engineering Specialist,
1991- 1999
Provided scientific research institute survey team using a large variety of
state of the art survey equipment with turn-key automation solutions, leading
to an increase in quality as well as in quantity of the production.
Caterpillar, FRANCE
Mechanical Methods Specialist,
1989- 1991
Training and support of fifteen mechanical computer draftsmen for their
corporate CAD tool. Provided manufacturing shop information regarding new
technologies.
Caterpillar, FRANCE
Electrical & Mechanical Technician,
1988- 1989
Preventive and break down maintenance of bulldozer girder welding robots and
associated machinery.
EDUCATION
Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
Esrf, Grenoble, France - Labview, 40 hour training, 1996.
French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
French equiv. to AS/BS, Grenoble, France - Electronics, 1988.You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]
-
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric -
Singapore Part Time Labview Programmer Needed
Hi all,
We are a Biomedical engineering company looking for Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
Interested parties please email me at [email protected] for further discussion.
Warmest Regards
TC
Singapore.Hi,
I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things. -
DIRECT HIRE LabView Programmer needed!!!!!!!
I have a DIRECT HIRE opening in Michigan for LabView Programmer. Must have a background in the automotive industry. Please email me your resume or call me for more information. [email protected] or 248-528-1200 x216
Thanks!!!
-Vicki PowellThis probably belongs into the LabVIEW job opening forum.
http://forums.ni.com/ni/board?board.id=JobPost
LabVIEW Champion . Do more with less code and in less time . -
Need to develope report for Deleting user profiles
Hi All,
I need to develop a report to delete inactive user profiles from SAP system. We have a found out a list of valid users but need to delete all the users which are not contained in this list.
If anybody is having any inputs, they are welcome.
Thanks & Regards
AbhiiREPORT ztest5.
PERFORM delete_user USING 'TEST' .
*& Form DELETE_USER
* text
* -->USERNAME text
FORM delete_user USING username TYPE bapibname-bapibname .
DATA : li_mess TYPE TABLE OF bapiret2 ,
ls_mess TYPE bapiret2 ,
lv_mess TYPE string .
CALL FUNCTION 'BAPI_USER_DELETE'
EXPORTING
username = username
TABLES
return = li_mess.
LOOP AT li_mess INTO ls_mess .
CLEAR lv_mess .
MESSAGE ID ls_mess-id
TYPE ls_mess-type
NUMBER ls_mess-number
INTO lv_mess
WITH ls_mess-message_v1
ls_mess-message_v2
ls_mess-message_v3
ls_mess-message_v4.
WRITE : / ls_mess-type , lv_mess .
ENDLOOP .
ENDFORM . "DELETE_USER -
Labview Programmer needed for project work in Milwaukee Area or over the internet
We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry. These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound. We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made. Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture.
This position is not a full time position as of yet. We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication. We perfer to hire somebody local but if we cant we can can do this over the internet. If you are interested, give us a reply with contact info. Thanks.
Regards,
BillBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
Programmer with LabView and Intellution needed for contract opening in
South Carolina. Please send e-mail to [email protected] to
request more information.I have a lot of experience with LV, what the contract?
Mike...
[email protected]
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
North New Jersey - LabVIEW Programmer Needed
Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected]I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
John Wilson
[email protected] -
I need help with TransparentBackgrounds for a school project
So i had found the transparentBackground class
* @(#)TransparentBackground.java
* @author
* @version 1.00 2010/2/26
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.text.NumberFormat;
public class TransparentBackground extends JComponent implements ComponentListener, WindowFocusListener, Runnable{
private JFrame frame;
private Image background;
private long _lastUpdate = 0;
private boolean _refreshRequested = true;
public Robot rbt;
public Toolkit tk;
public Dimension dim;
public Point pos;
public Point offset;
long total;
long used;
public TransparentBackground(JFrame frame) {
this.frame = frame;
updateBackground();
frame.addComponentListener(this);
frame.addWindowFocusListener(this);
new Thread(this).start();
public void updateBackground( ) {
try {
total = Runtime.getRuntime().totalMemory();
used = (Runtime.getRuntime().totalMemory() - Runtime.getRuntime().freeMemory())/1024;
System.out.println("updateBackground() Run: Memory Usage: " + used +" MB");
rbt = new Robot();
tk = Toolkit.getDefaultToolkit( );
dim = tk.getScreenSize( );
background = rbt.createScreenCapture(
new Rectangle(0,0,(int)dim.getWidth( ),
(int)dim.getHeight( )));
} catch (Exception ex) {
public void paintComponent(Graphics g) {
System.out.println("paintComponent() Run");
pos = this.getLocationOnScreen();
offset = new Point(-pos.x,-pos.y);
g.drawImage(background,offset.x,offset.y,null);
protected void refresh() {
if (frame.isVisible() && this.isVisible()) {
repaint();
_refreshRequested = true;
_lastUpdate = System.currentTimeMillis();
System.out.println("refresh() Run");
// ComponentListener -------------------------------------------------------
public void componentHidden(ComponentEvent e) {
public void componentMoved(ComponentEvent e) {
repaint();
public void componentResized(ComponentEvent e) {
repaint();
public void componentShown(ComponentEvent e) {
repaint();
// WindowFocusListener -----------------------------------------------------
public void windowGainedFocus(WindowEvent e) {
refresh();
public void windowLostFocus(WindowEvent e) {
refresh();
public void run() {
try {
while (true) {
Thread.sleep(10);
long now = System.currentTimeMillis();
if (_refreshRequested && ((now - _lastUpdate) > 100)) {
if (frame.isVisible()) {
Point location = frame.getLocation();
frame.setLocation(-frame.getWidth(), -frame.getHeight());
updateBackground();
frame.setLocation(location);
refresh();
_lastUpdate = now;
_refreshRequested = false;
System.out.println("run() END------------");
} catch (InterruptedException e) {
e.printStackTrace();
}In have like 8 - 12 of these "panels" in my program. They are not running simultaneously but each one is created everytime I press a button.
I have A button ing main class (x) and another class (y)
Class y
public JFrame Frame;
public TransparentBackground Panel;
class y()
public void makeMe()
Frame = new JFrame(" ");
Panel= new TransparentBackground(Frame);
/// ....all the combining
// and then
frame.setVisible(true);
public void hideMe()
frame.setVisible(false);
}When press A which has only one instanciation of class y:
it calls
y.makeMe()
and then it when I press it again
it calls
y.hideMe()
and then this same process goes on for like 8 times before it starts to show this
updateBackground() Run: Memory Usage: 248606 MB
Exception in thread "Thread-25" java.lang.OutOfMemoryError: Java heap space
at sun.awt.windows.WRobotPeer.getRGBPixels(WRobotPeer.java:46)
at java.awt.Robot.createScreenCapture(Robot.java:329)
at TransparentBackground.updateBackground(TransparentBackground.java:45)
at TransparentBackground.run(TransparentBackground.java:104)
at java.lang.Thread.run(Thread.java:619)
paintComponent() Run
refresh() Run
paintComponent() RunBTW: the x and y class are just skeletal classes, but the actual ones I use in the programs are filled with Images and all that good stuff..
So my ulimate question is..
Why dose it make that error?
and i also tried to increase the heap space, but it still showed the same error.
I am just a newbie, so i would appreciate if the explainations are easier to understand for beginners
thank you for reading and taking interestI don't understand you GUI approach at all: you are making a very basic board game. You need not even do an animation loop as a continuously running process. While I have not gone over your code extensively, what your errors and glimpsing at your code says to me is that you don't have your objects being disposed of because they are running--your "while(true)" loop is not being canceled/stopped.
You need to make a very basic animation loop and look at making your events happen accordingly. You can easily paint your cards/messages over portions of the playing screen and have them age off with a timer or other triggered events--this removes the need of your while(true) loops and runnable objects.
On the other hand, you do not need to implement runnable nor have a running animation loop with a basic GUI. When you have your "cards" pop up, they need not be objects that implement runnable either, but just basic GUI components.
Anyways, I'm just at a loss as to your need to have everything implement runnable. -
Role to develop webdynpro for java
Hi all,
What role in UME my user need to develop webdynpro for java?
I need configure JCO, deploy application.
regards,
DouglasHi Doug,
Your userid need to be added in the "Administrator Group".
Administrator Group containg Roles for Content Administrator, User Adminsirator and System Administrator.
>FOR JCO -> Content Administrator Role Required (Your Userid should have Content Administrator Role)
>For Deploy:- You need SDM(Userid) and password to deply on the J2EE Engine
You can have only Content Administrator Role if they not assigning to "Administrator Group".
Hope it helps,
Regards,
Arun
Maybe you are looking for
-
Need help setting up!!
I need some guidience to setting up a remote connection to my work's G5 iMac. Here is the configuration: Server: The server will be the G5 iMac at work which is the only Mac on a network of PC's. Our company shares a DSL network connection. Remote: T
-
I am trying to send photos to the cloud from my phone to my iPad but they are not appearing in the stream. I have read the instructions and I think I am doing it right or am I missing a part of the process?
-
Union All with Linked Servers - Works until loaded on to the report server then fails.
Hi, On our production server I have 2 linked servers. One that leads to ServiceNow via ODBC and one that leads to an HP Openview database. Testing these linked servers works fine. I have a query that obtains info from each source and 'union all' to
-
I received the same error log loading OS X Mavericks On different hard drives at different times of the day yet log file is identical! Send to Apple gives same response "unable to submit crash report log in OS install environment!" "The certificate f
-
Hi this is my first time to ask a question here in this community. I am a system administrator here at my work and we are having some issues on some servers that we handle. Network in our office is stable and we have determined it is not a problem on