LabVIEW Programmer Wanted

Project using Labview as a supervisory control system to interface with an OMRON PLC.
Project is in the New York City Area
Send resume [email protected]

Good Evening,
You may get more responses if you post this on the Jobs, thread, rather than the thread where folks post that they are looking for jobs. Those that are advertising that they are available may not look back in this thread after they post.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Similar Messages

Freelance Labview programmer wanted

Freelance LabView programmer wanted, New Haven Ct area.
Must possess shovel (dig a project out of a hole). Vi reading analog input
from daq board will properly read input voltage when running by itself in
timed loop. It does not read voltage when running in parallel with other
vi's in program. The digital IO's on the same daq board can be written to
with no problem in the same loop.
Bill Lubarsky

If you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com

Keen Labview Programmer Wanted

A Keen Labview Programmer is wanted to work in Formula1. I am leaving at the end of October, and the replacement has fallen through.
You must be a competant Labview Programmer, and ideally have knowledge of Data Acquisition, and Control Systems. Ideally an Aerospace or Autosport background.
The Company is Force India F1 Team based in Silverstone UK.
Thanks,
Rob
Solved!
Go to Solution.

Please post here: http://forums.ni.com/t5/LabVIEW-Job-Openings/bd-p/JobPost

LabVIEW programmer wanted with imaging & sub micron motion control experience

We have a project where we need to align a microscopic image of a prober tip to a mask of known XY coordinates. The image will be acquired with a video microscope with a high resolution digital camera, and the prober will be mounted onto an automated XY theta stage. The mask will have to be scaled to match different magnifications/fields of view, and the stage will automatically align the prober to the mask. Project is located in Eugene, OR. Please contact John, or Gary at 800 706 2284 for further details.

Hi, I'm having a problem with switching of relays using ADAM module 4608. I have 4 relays with me. The vendor supplied commands to open and close relays. But while using serial communication protocol, I can only operate one relay at a time. The problem is there are four different commands to open but only one command to close it all. I couldn't operate all the four relays simultaneously. Program I developed is attached with this message.The commands to open are, #010001,#010002,#010004,#010008 and the close command is #010000.please, can you help me find a solution. I'm really stuck here.
Regards,
arjun
Attachments:
RELAY.JPG ‏75 KB

Wanted LabView Programmer to Work in Formula 1 Team

A Keen Labview Programmer is wanted to work in Formula1. I am leaving at the end of October, and the replacement has fallen through.
You must be a competant Labview Programmer, and ideally have knowledge of Data Acquisition, and Control Systems. Ideally an Aerospace or Autosport background.
The Company is Force India F1 Team based in Silverstone UK.
Thanks,
Rob

There has been quite a bit of Interest so here is the job as it appeared on the Autosport website in July.
Just to make it perfectly clear, it is factory based at Silverstone in the UK so don't aply if you like working from home. Salary is dependant on experience, but I am currently on £47K + "potential" bonus.
No Overtime payments, and about 30days holiday a year (which includes public holidays) - two weeks must be taken in the summer during the F1 season shutdown. 8:30am-5:30pm Mon-Fri.
As long as you are eligable to work in the UK I assume you can apply.
You can send you CV direct to me [email protected] and I will gladly forward it on.
Thanks,
Rob
Attachments:
July+2011+Fi+Autosport+Ad.pdf ‏111 KB

How to start a second labview programme automatically when first programme is aborted ?

Hi,
I have two independent labview programme. I want to run one programme at first. Second programme should start automatically if first programme is aborted by clicking abort button. Could you please help me in this regard.
Thanks

Would it not be better to close the meters when you close the application and have your application exit gracefully rather than having it start another one?
(You can call an executable from within LabVIEW using the System Exec VI but I don't think you need that here)
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

I am looking for LabVIEW programmer job.

I am LabVIEW programmer with 6 years experience.
My expertise is optical communication, signal/image processing, C/C++.
I am living at Israel.
T.U in advance
Nadav Chernin
[email protected]

It sounds like you have solid experience. Have you considered contract work? The job market kinda sucks right now. Check out net-temps.com and jobcircle.com. Presently I work through a contract house called YOH Scientific, yohscientific.com in Newark, DE. I'm sure they could find you work but they'll skim a lot off the top. I worked with optical comm when I lived in Mass. Too bad it took a dive. I still see a lot of opportunities for RF comm in southern New Jersey. They usually want LabWindows/CVI. Since you know c/c++, LW/cvi would be a cake walk for you.
Parts of California are also looking hot. I just got this from my net-temps search agent:
1. Software Design Engineer
CA Valencia 6 - 9 months
http://www.net-temps.c
om/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53685XSLN
2. Sr. RF Test Engineer (San Diego)
CA San Diego 0 - 30 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt278/300278-3074-13-72416
3. Lead Test Engineer
CA Torrance 12+ months
http://www.net-temps.com/adcgi/jobref.cgi/jsd/manp126/PR90630_NT_53706XJDC
4. Lead Engineering 3
CA Torrance 180 - 365 days
http://www.net-temps.com/adcgi/jobref.cgi/jsd/volt272/300272-1063-13-72458
Good luck,
- Kevin

Part time LabVIEW programmer needed

Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
Chris

Chris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric

Does anybody can give me a simple example about the labview programme calling dll ?

Does anybody can give me a simple example about the labview programme calling dll ?And the dll is also writed by using labview .I just want to study the process of the labview programme calling dll file.Thank you!

Hi,
Please click on "Find Examples" in the "Getting Started Window"
A window named "NI Example Finder" will pop up.
In this go to "Search" tab
Type "DLLs"
You will see a lot of examples.
If you're online, you'll see user examples too...

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step

I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step
Attachments:
this is a java file changr the jpg to jar .jpg ‏101 KB

I'd recommend searching the forums to find your answer. http://forums.ni.com/ni/search?submitted=true&q=java+labview

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

LabVIEW Programmer Full Time Position, Livonia, Michigan - Join are team of programmers

LabVIEW Programmer POSITION
Revolutionary Engineering, Inc. is dynamometer testing systems integrator and services company. We provide systems and services for the automotive industry as well as in-house dynamometer testing. We currently have a position open for a LabVIEW Programmer. A brief description of the positions responsibilities and benefits are summarized below. If you are interested please e-mail me at [email protected]
Position Available
Full Time LabVIEW Programmer
Requirements
Bachelors Degree
LABVIEW programming experience, CLD a plus
AutoCAD Experience a plus
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
LabVIEW Programming
Control System programming and interfacing
Design and build assistance on dynamometer systems
Electrical and mechanical print review
Benefits
Paid Vacations
Full Medical
Paid Sick Days
Competitive Salaries
Please check out our website at www.revoleng.com
regards,
Daniel E. White
Revolutionary Engineering, Inc
36865 Schoolcraft Rd
Livonia, MI48150

Dear Sir,
I learnt about your need for LabVIEW Programmer from your company’s website. I am interested in this job profile which is mentioned in your website. Moreover I aspire to work in a technical company of my field.
I believe that my LabVIEW knowledge and my education background are appropriate for your requirement , I am attaching my resume for your consideration.
Thanks in advance.
Regards,
Devi S.
Programmer analyst trainee,
Cognizant technology solutions,
Chennai.
PH: 91-09789069507
Attachments:
Devi_Sadasivam.doc ‏48 KB

LabVIEW programmer needed for full time position, Orange County CA

Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg ‏186 KB

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

LabVIEW programmer for Sound Measurement & Analysis software

Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 10 years and our continued growth has created an opportunity for a LabVIEW programmer to join our programming team.
This position reports to the Software Manager. Duties include, but are not limited to:
• Designing and coding new Sound Measurement and Analysis software
• Improving, reviewing and de-bugging existing code
• Preparing internal and user technical documentation
• Testing code
• Interfacing with management, sales teams and customers to define tasks
Required skills / education
• Strong background (3+ years) in large-scale LabVIEW programming
• Bachelor’s degree (Masters preferred) in engineering, computer science or similar subject
• A methodical, user interface-intensive approach to coding, testing and documentation
• Competency in Visual Studio, .NET and database programs is an advantage
• The ability to work to tight deadlines
• The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
• Previous experience or an interest in acoustics or sound and vibration engineering is an advantage.
• Minimum 2+ years in a similar technical position (5+ years preferred).
Listen is a small, dynamic, and growing company, located in Boston’s historic South End. We offer all the benefits of a small company, combined with the security and stability of a software company that has been in business for over 10 years and sells to most of the world’s major loudspeaker manufacturers. Our customer list includes many of the world’s major loudspeaker and telecommunications manufacturers. Please visit our website, www.Listeninc.com, for more information about our products and markets.
Benefits include a competitive salary, healthcare, paid vacation and a retirement plan.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Labview Programmer Position (NI Board).

Are you open to consultants? I'm currently in Northern NJ and I could work on-site in Boston, MA 3 days a week / 30-35 hrs a week. I have a BSEE, I'm a US Citizen with an Active Secret Clearance. I have over 10 years of experience with LabVIEW and 5 years of experience with TestStand. I'm also very comfortable working with Test and Measurements Instruments.

Looking for a UK based Labview programmer, short term, contract or full time, depending on what suits. Immediate start, Signal Processing skills ideal.

We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]

If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter

LabVIEW Programmer Wanted

Similar Messages

Maybe you are looking for