LabVIEW project engineer near Karlsruhe/Germany

Hello,
we are a company producing test- and measurement equipment for the automotive industry. We are looking for an experienced LabVIEW/Teststand engineer. Good knowledge of automotive interfaces (CAN, LIN, MOST), DAQ, Ni-Vision is a plus. German work permit and language is a must. A remote job is not possible. We welcome also freelancer.
If you are interested, please send us your application to the following eMail address: [email protected]
Thanks and best regards
Patrick Volz
Managing Director
MCF Technologie GmbH
Pforzheimer Str. 122
D-76275 Ettlingen
Germany
Phone: +49 7243 94756 0
www.mcf-technologie.de

Dear Sir/Madam,
My outgoing personality, my technical background, and my education make me a strong candidate for a position as Consultant (with a telecommuting preference) at Moore Good Ideas.
My experience at Mississippi State University has made me a versatile, theoretical and analytical problem solver. With detailed technical reporting and proceeding presentations, the Aerospace Engineering Department has adequately prepared me for the specified duties in the position announcement.
As you scheme through my resume, you will find that I have ample projects that pertain to this opening. You will discover the acquired computing and technical skills required to fulfill the assigned tasks. I can offer a high level of expertise in executing necessary simulations and detailed analysis.
I hope to serve as a model and contributor if given the opportunity to be a member of your team.
Sincerely,
N. Emmanuel Okoro
Attachments:
Resume of Emmanuel Okoro.doc ‏33 KB

Similar Messages

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Where Used for VIs and LabVIEW Project

Is there a way in LabVIEW Project Manager to check the Where Used status on all the VIs at the same time? I am going through a project trying to weed out VIs that are not used in the project. I know I can check the "Find Callers" for each VI, but this feels slow and cumbersome. Is there a way I can generate a report to find the Where Used status on all VIs in a project?
Thanks,
Matt

You also have the Find Items with No Callers Dialog Box as of LV 8.5
Eric V
National Instruments
Applications Engineer
Certified LabVIEW Associate Developer
"I'm a Ramblin' Wreck from Georgia Tech and a helluva (NI Applications) Engineer!"

NI Gold Alliance Partner Looking to Hire Project Engineer

Project Engineer
G Systems, LP – Richardson, TX
Growing company in the Dallas/Fort Worth metroplex specializing in the design and development of custom test and measurement, data acquisition, and control systems seeks a Project Engineer for full time, permanent employment. Since G Systems’ founding in 1990, we have supplied hundreds of custom turnkey systems for a wide variety of industries including military/aerospace, oil/gas, biomedical, and telecommunications.
G Systems Project Engineers develop automated test, measurement, and control systems.
Responsibilities include working directly with clients on:
-project requirements definition and management
-system architecture design and documentation
-hardware selection and integration
-software design and development
In this position, engineers work:
-independently with minimal supervision
-or in a team as a technical contributor
Required qualifications:
-Bachelor’s degree or higher in engineering or applied science
-Strong knowledge of test and measurement technology and application
-Excellent interpersonal and communication skills (i.e. team player and good client skills)
-An inherent desire to learn new technology and an innovative/adaptable mindset
-Strong LabVIEW software development experience – preference will be given to Certified LabVIEW Architects or Developers
-Hardware design experience
-Minimum 2 years experience specifying and integrating data
acquisition and control hardware
-Strong electrical engineering skills and “hands-on” ability
During the interview process, technical and interpersonal skills will be tested and a background check will be performed. Successful applicants will be asked to show proof that they can legally work in the United States. In general, work will be performed in the DFW area. However, occasional travel may be required.
Salary is commensurate with experience level. Benefits include medical insurance, 401k, profit-based bonus, paid vacation/holidays/sick time, flexible work schedule, excellent work environment, and strong growth potential.
If you feel your skills and experience match the profile above, please send your resume to [email protected]. Please do not respond if you represent a staffing agency.
CLA, LabVIEW Versions 2010-2013

Jeff·Þ·Bohrer wrote:
for(imstuck) wrote:
bump
It might be a good time to discuss opening your Minneapolis branch
Why would they do that? There's nothing good up there? And those TX guys will just say that its cold.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Senior Project Engineer Postion - Bloomy Controls, Milford, MA

Senior Project Engineer Postion - Bloomy Controls, Milford, MA
Purpose
Lead the development of automated test, data acquisition, and control systems. Involves extensive customer contact and moderate travel within New England. Contribute to system designs and specifications.
Requirements
- BS in Science or Engineering. EE Preferred. MS a plus
- Ten years of overall test, measurement, automation, and control engineering experience
- 5+ years LabVIEW required. TestStand, LabWindows/CVI or C/C++ experience desired
- DAQ, PXI, GPIB, VXI, vision, motion experience
- Experience writing requirements, documentation, UML
- Strong mathematics background, including signal processing in time and frequency domains
- Excellent verbal and written communication skills
- Experience in a variety of industries, such as electronics, communications, life sciences, power/energy, a plus
Responsibilities
- Write project specifications and system designs
- Design, develop, implement and document Test and Measurement applications using LabVIEW and TestStand
- Serve as technical mentor for less experienced engineers
- Devise, document, and oversee execution of test strategies
- Participate in tradeshows, conferences, seminars, and events
- Write technical papers and give presentations on applications
- Flexible career path may include principal engineering, project management, sales engineering, or engineering management
Note
- Candidates must be legally authorized to work in the United States. Bloomy Controls will not sponsor a new visa or transfer an existing one.
About Bloomy Controls
Bloomy Controls provides automated test, data acquisition, and control systems that help customers throughout the Northeast United States increase productivity, improve quality, and reduce costs. We support leading companies in a variety of industries, including aerospace, electronics, and life sciences.
Our employees enjoy highly stimulating and challenging work. We provide a creative, collaborative environment that is committed to your professional development and growth.
Send your resume to [email protected]

PPB,
Thanks for the posting. I just sent my resume and coverletter to the email address you listed. I look forward to hearing from you.
Respectfully,
Dave Lehman

Project Engineer - San Rafael, CA

Cal-Bay Systems, Inc. is a small, rapidly-growing company headquartered in beautiful Marin County, CA. We specialize in PC-based custom automation systems and have a varied customer base that includes medical device, semiconductor and aerospace companies. Our projects range from simple data acquisition systems for research scientists to production line testers for medical device electronics. Our engineers work within teams and directly with customers.
Project Engineer
We are seeking an enthusiastic Project Engineer who enjoys a dynamic work environment and the opportunity to work in multiple domains. This is a full-time position located in our San Rafael office. Responsibilities:The Project Engineer is responsible for software development and hardware integration of automation systems. Travel to customer locations in the south bay (San Jose) area is often required. Qualifications:· Bachelor’s degree in Engineering· LabVIEW software development expertise· Experience with National Instruments hardware platforms (PXI, cRIO, MXI, etc.)· Understanding of instrumentation and data acquisition· Strong written and verbal communication skills· Ability to generate requirements documents, test plans, etc.· Ability to estimate development tasks Benefits:
We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and extensive benefits package including paid time off, medical, dental and vision benefits and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. To Apply: Please submit resume to: https://administaff.ats.hrsmart.com/cgi-bin/a/highlightjob.cgi?jobid=58519 Administaff is not a staffing agency. In fact, most of our listings presented are great full-time or part-time opportunities with small- to medium-sized companies. By delivering HR services such as recruiting, payroll and training, Administaff can help its clients focus on what they do best. And because we have the inside track to these firms, you'll have a jump on your next career! Administaff is proud to be recognized: Most Admired Companies, Fortune 1999, 2000, 2001 and 2002, Fortune 500, Platinum 400 and Forbes. EOE

Hello,
Is this position still open?

Project Engineer needed - San Rafael, CA

Cal-Bay Systems, Inc. is a small, rapidly-growing company headquartered in beautiful Marin County, CA. We specialize in PC-based custom automation systems and have a varied customer base that includes medical device, semiconductor and aerospace companies. Our projects range from simple data acquisition systems for research scientists to production line testers for medical device electronics. Our engineers work within teams and directly with customers.
Project Engineer
We are seeking an enthusiastic Project Engineer who enjoys a dynamic work environment and the opportunity to work in multiple domains. This is a full-time position located in our San Rafael office. Responsibilities:The Project Engineer is responsible for software development and hardware integration of automation systems. Travel to customer locations in the south bay (San Jose) area is often required. Qualifications:· Bachelor’s degree in Engineering· LabVIEW software development expertise· Experience with National Instruments hardware platforms (PXI, cRIO, MXI, etc.)· Understanding of instrumentation and data acquisition· Strong written and verbal communication skills· Ability to generate requirements documents, test plans, etc.· Ability to estimate development tasks Benefits:
We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and extensive benefits package including paid time off, medical, dental and vision benefits and future growth opportunities within the company. Plus, we work to maintain the best possible environment for our employees where people can learn and grow with the company. We strive to provide a collaborative, creative environment where each person feels encouraged to contribute to our processes, decisions, planning and culture. To Apply: Please submit resume to: https://administaff.ats.hrsmart.com/cgi-bin/a/highlightjob.cgi?jobid=58519 Administaff is not a staffing agency. In fact, most of our listings presented are great full-time or part-time opportunities with small- to medium-sized companies. By delivering HR services such as recruiting, payroll and training, Administaff can help its clients focus on what they do best. And because we have the inside track to these firms, you'll have a jump on your next career! Administaff is proud to be recognized: Most Admired Companies, Fortune 1999, 2000, 2001 and 2002, Fortune 500, Platinum 400 and Forbes. EOE

Hello,
Is this position still open?

Packed Project Library (lvlibp) slows LabVIEW Project

Hello,
My LabVIEW project (2010SP1) perfoms well except when I add a critical library provided by my customer in the form of a LabVIEW Packed Project Library. Activities like loading the project, opening VIs, running VIs, editing VIs respond VERY SLOW (about 20X). In contrast, if I open VIs in the LVLIBP without loading the project, everything responds at a normal rate.
Any suggestions?
Jorge

Hi Jorge,
May I know what does that Packed Library contain? I have read about a similar issue but in that case they were running some TestStand benchmarks that loaded a packed library.
Jorge
Applications Engineer
National Instruments
Certified LabVIEW Associate Developer (CLAD)

"unable to load labview project" in Deployment Machine

Hi all,
well the Deployment Target works fine on Development machine
But has problem Loading on the Deployment System "unable to load labview project"
has anyone had similar issues and ound a soln.
NI Support has not responded yet to the solution.
Attachments:
unabletoload.PNG ‏17 KB

Hi aparab,
I think I will need more information to solve this issue.
You told "NI Support has not responded yet to the solution." Do you already have a service request number of the NI support?
Can you post your project? Which RT-target do you use? Which hardware?
You can also post a MAX report of you windows computer and one of your target:
1. Start -> Programs -> NI MAX
2. File -> create protocol -> choose technical support and my system (development computer) -> next -> next -> choose path -> next -> finish.
3. File -> create protocol -> choose technical support and your RT-target (real-time system) -> next -> next -> choose path -> next -> finish.
Best regards
Suse
Certified LabVIEW Developer (CLD)

Is there a way to determine the equivalent ANSI C code from a Labview project?

I'm a complete beginner to Labview. I have this fairly complex Labview project that was used to create a DLL which matlab could call to control my PCI-6534 card without having to know the NIDAQmx calls.
I'm in the process of figuring out how to make those NIDAQmx calls directly from Matlab but I'm not getting the same results as when I call this DLL mentioned above so I thought I'd try to make sense of the Labview project VIs. I'm starting to make sense of the overall scheme of the VIs, but I'd like to be able to run the project, step through it, and perhaps see the NIDAQmx commands (or something equivalent so I can determine how to call the NIDAQmx commands within Matlab).
Is this possible to do?
Thanks,
Jason
Solved!
Go to Solution.

Yes. The toolbar allows you to turn on highlighting so you can run the VI and see the contents of wires. You can put probes on wires. You can single-step through code. All of this is explained in the LabVIEW Help under Fundamantals -> Running and DEbugging VIs -> Concepts -> Debugging Techniques.
In regards to the implied question in the title of your post, no you cannot directly convert LabVIEW code to C in the development environment. Yes, there are tools to convert LabVIEW to C, but that's intended for microprocessors.

LabVIEW Project and saving only the relevant vis

I have a large development folder (and sub-folders) that I have used as a repository for all of my development plus test pieces of code. There are about 800 vis in the folder, but if I save my main VI off to another folder using "Duplicate Hierarchy to new location" I end up with 150 or so relevant files. Unfortunately I have not discovered an easy way of copying the project over to the new location.
What I'm looking for is the ability within the project file to go through all of the files that in the project, determine if they are used in the VI hierarchy, transfer those files to my new location along with the project files. And then also reference all files in the new location, not the old. This way I could build a number of slightly different programs, but which uses the whole power of my development vis that I may have already.
Dan

Peter_B wrote:
Ben wrote:
I'd start by creating a source distribution in the project (use perserve hiearchy) based on the top level VI or if that is not enough create a Tree.........
A similar problem has stumped me for years and relates closely to the solution you pose Ben.
I am frustrated that LabVIEW doesn't allow me to include the lvproj file into the source distribution. I used to be able to do it in LV2009 via a workaround (I'd put the lvproj file into a subdir of the highest commmon DIR where all the project files reside on disk), but now LV 2010 intentionally seeks out and excludes my lvproj wherever I try to hide it !!
This article from NI Source Distribution Does Not Include LabVIEW Project File tells me to use the zip file distribution method instead. Well, that ain't a solution for me as zip file distributions don't have:
the 'Always Excluded' pane in the Source Files menu (there are project files that I don't need to distribute),
the 'Additional Exclusions' menu item as for some reason there are a heap of vi.lib files also included into this zip (which I don't want or need).
Yes I still that was a bad idea by NI.
I did try to log a bug about that but was fed some line about including the .proj file was not part of thier use case so... I think their use case is flawed, still.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I copy tasks from Automation Measurement & Explorer to a LabView Project

I have a labview project which currently relies on tasks that are predefined in the Measurement and Automation Explorer. I haven't been able to figure out how to export them out of the Measurement and Automation Explorer to be imported into Labview. Can this be done?

Well, let me try to explain something, which can be really questionable
Hence both methods use the same API, the DAQmx API, they have different "implementations". The LV API consist of LV VIs, of course, in the first instance. Of course, digging deep into them, you will encouder CLFNs to the DAQmx DLLs. But some of them are "hidden" because property nodes are in fact something similar to the DLL-calls......
In MAX, you never "see" the API, you are using the wizard. Nevertheless, MAX uses the internal functions contained within the wizard to use the device just as desired (hopefully ) But it never will use the VIs to accomplish that...
Now there are imho two possibilities for you:
a) You start using the LV DAQ Assistent to create your tasks on the PC. It has the same appearence as the wizard in MAX, so you will not trade any used interface for a new one (which would be the API). When you finished the definition, the wizard can be transferred to LV code which can be altered. But if doing this, you will lose the possibility to alter the task using the "used API", the wizard.
b) You can live with the current situation but create a product suggestion for LV and DAQ at the Product Suggestion Center.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Can't access variables in specific S7-1200 DB's in LabVIEW project

Hi all,
I'm trying to establish a connection between LabVIEW and a Siemens S7-1200 though Ethernet and SIemens OPC Server.
The physical connection is OK (I can ping S7-1200 with no problem).
When I needed to access variables from specifics DB's inside S7-1200 ( I want to access variable DB190,X0.4), I called Siemens support and they said I had to modify the variable's definition when using OPC Scout, from "MX0.4" to "DB190,X0.4", and then it was possible to access this variable.
Same solution (renaming the path) applies to NI OPC Client, I can read and write variables properly.
My problem is that when I try to add variables in LabVIEW Project, I can't find those variables whose address were modified, so I can't access the correct variable in my program.
I tried to change the variable path in Multiple Variable Editor, but it doesn't work either.
Any suggestions on what I can try??

First: Avoid the ODBC/JDBC Bridge if at all possible.
It's the worst JDBC driver I've ever seen. It's buggy
and a great hindrance both to learning and to
producing usefull code.I agree that there might be problems with M$ Access, but there are problems with all databases, including MySQL (e.g., no referential integrity in free download version). It's capable enough for the query the OP is trying to execute.
The problem is with his code, not Access or the bridge driver. He'll go through a lot of effort to switch databases and still have this problem. Better to understand what HE'S done wrong and fix it so he'll do it correctly for all databases, including Access.
You just need to be more careful with your query, I'm sure.
%

2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0      Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Developing intuitive GUIs.
◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦     Delivering professional and high quality, customer education courses.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦     Working with the business development team to develop proof of concepts for customers.
◦     Travel 50% of the time.
3.0      Qualifications & Requirements:
◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦     Understanding of object oriented principles.
◦     Ability to pass CLA exam within the year.
◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦     Practical electrical debug experience.
◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a happy view on life.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full clean and valid UK driving license.
4.0      Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0      Reporting:
Systems Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx ‏18 KB

Electrical/Software (LabVIEW) Design Engineer, Wiltshire, UK

Job Title: Electrical/Software (LabVIEW) Design Engineer
Job Type: Permanent
Location: Malmesbury, Wiltshire, UK
Job Purpose:
To provide design solutions for machine control, instrumentation and data acquisition using National Instruments LabVIEW. Support and maintain systems throughout Dyson Ltd.
Principal Accountabilities:
Design of software using National Instruments LabVIEW for control and data acquisition
Support existing National Instruments LabVIEW systems
Design, manufacture and installation of safety and machine control circuits
Design bespoke signal conditioning PCBs
Write specifications and manage sub-contract design and manufacture resource
Skills Knowledge & Experience:
Essential:
HND in Electrical/Electronic engineering with 5 years experience
Attendance at National Instruments LabVIEW Intermediate 1&2 with 5 years programming experience
Desirable:
Working knowledge of National Instruments hardware product range
PCB design (Mentor Graphics)
Experience of PLC programming
Formal training in CE directives on Machinery, Low Voltage and EMC.
Knowledge of BS7671 Electrical Installations (IEEE 17th Regs)
Behavioural:
The ability to communicate appropriate, concise and accurate information across the business (technical and non-technical) is essential for the successful applicant.
You will be a highly driven individual who strives for accuracy & quality in work delivered.
You will be able to solve problems in a logical way, pre-empt future problems and seizing opportunities without waiting to be told.
The proven ability to work as part of a team or un-supervised to an agreed goal or set of deliverables is imperative.
For more detail visit our website: www.careers.dyson.com
Contact: [email protected]

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

LabVIEW project engineer near Karlsruhe/Germany

Similar Messages

Maybe you are looking for