LabVIEW project files are not opening

Hai all
Iam encountering a serious problem in LabVIEW 8.2, My LabVIEW is not cpable of opening the project files, i could not able to create a project file in LabVIEW 8.2, It show some messages like NIMAX encounters error and stops there, But i am able to work VIs its all opening and my NI Max is also working properly.what might be the problem please send some solutions

Hey,
I blindly saw the refresh tab on your attachment and thought that my internet explorer has some problem, so just pressed that refresh link. I did it for 4 times. Then only recognized that it was an error message.
As daveTW told try reinstalling LabVIEW
Thanks,
Mathan

Similar Messages

HT3775 why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

Webarchive files are not opening- what to do?

My webarchive files are not opening. I have a lot saved from previous months of research. I never had a problem opening them before. Now all of a sudden I get a page from mywebsearch that simply says "Recently closed." All of them...even the ones I saved this afternoon.
Can someone help?

You can try using this tool to first remove all traces of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

How can I install plugins? my files are not opening because some are missing after updating my OS

How can I install plugins? my files are not opening because some are missing after updating my OS
I can´t update the software because it crashes
Thanks

Casiii which Adobe software or service is your inquiry in reference too?

I updated to Mavericks and realized my FCP project files are not there? Help!

Someone please help. I had built a new video project the other day and everythying worked fine. However I needed to edit an older job and and went to my library and when I click on the Event, my source files are there but no my project files. On the job I just did recently those projects files are there. I went to my folders where my FCP event and project files are and tried to open one of the "backup" files and that didn't work.

I'm assuming you've updated your projects and events. If you haven't, you should.
If the are updated, you should have an event named Updated Projects. Look in there.
You should access your projects through the app, not the Finder. There is no no longer any such thing as fcpproject files in the new library model.
Russ

LabView project file does not understand mapped directories

I have my LabView project file and VIs located on a network driver \\svr-maltese\botdfs which I have mapped to my S: drive. I have a short cut that I use that gets me to
\\svr-maltese\botdfs\.....\48-000058-001-x01 or I can walk the S: tree down to 48-000058-0001-x01 directory, but I get to the same place and the same files. Depending on how a get there I will be conficts that have to be manually resolved. LabView does not seem to understand that they are the same file. LabWindows has the same problem, but handles it better.
Solved!
Go to Solution.
Attachments:
Conflicts.JPG ‏44 KB

Fixing this would be hard and quite costly in terms of performance. For each UNC file LabVIEW would have to query if it is on a network path and if there are alternate paths that also point to the same resource. Then it would have to normalize the paths. Networked file APIs in Windows are notoriously slow and hampered by all kinds of authorization problems where the only way to detect them is to start the operation and hope that it finishes properly, running into lengthy timeouts if it doesn't.
I doubt you would want LabVIEW to take one minute for every UNC file in a project every time you load that project because it does this alias checking and runs into network timeouts every time.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

PDF files are not opening in IE!!!

Some PDF files are not displayed while opening in browser IE . The PDF files are generated through servlets (JWS 2.1). While analysing the problem we have found that the one request invokes the doget() method of the servelet more than once. This problem is not appearing in netscape.
Please give suggestions.

I am having the same sort of problem. I have a form posting to a servlet that displays a pdf based on the vars posted to it. My doPost() calls doGet(). When I post to the the servlet the doPost() is called and then it calls the doGet() and then SOMETHING else calls the doGet() again. Since the vars that I am using to load the pdf are posted they are out of scope for the second doGet(). I tried two things to fix this:
I changed my doPost() method to do nothing but check the request variables and hold on to them. Then I changed my doGet() to use the values that I held instead of the request vars. This only worked sometimes.
Then when I rolled all of my code back and changed my form from POST to GET everything worked fine. It seems that there is something that causes the browser to always call the GET when you are using application/pdf. If my doPost() calls my doGet() everything is lost on the second doGet()

Music files are not opening in itunes.

Hi
My music files will not open in itunes and is not recognised in the library. I have the files in the 'My Music' file however when looking at the music file it say the file is locked? is there anyway I can get my itunes to recognise the music files?

I finally removed those audio and video files from iPhone, although it will be tough to add them back to iPhone, but at least I saved the phone spaces.
I used software something like iTools, delete everything under File System / User / iTunes Control, then restart phone, that simple, usage count, spaces used are all correct now.

EML files are not opened in the browser

EML files opened from a SharePoint 2010 document libraries are not opened in the browser. Instead, a dialog box is opened and prompts to save the file.
Since there's no standard application that knows how to handle EML files, and since the EML format is built into SP (send emails to document libraries), I think this behavior is unacceptable.
EML files should be opened in the browser, similar to SP 2007.

Seems the solution is in the client side configuration.
If eml files (as all other file types) are not configured to open by default in Outlook 2007 (or Windows Live Mail), they will be prompted for download or open.
The registry change link I provided earlier did not work for me. I tried this:
http://webcache.googleusercontent.com/search?q=cache:-hgG6T55trAJ:john-h-selnes.spaces.live.com/blog/cns!6C7F16530F119E8D!3092.entry+how+to+configure+sharepoint+to+opem+eml+file+in+outlook+2007%3F&cd=1&hl=en&ct=clnk&gl=us&source=www.google.com and
solved my problem. Seems by default eml file set to MIME message/rfc822 and associated with windows live mail - SharePoint team hates Outlook team, right?
If you do not have such assoication, it opens in browser!
My settings: MOSS 2007, windows 7, outlook 2007.

Excel files are not opening in outlook 2010.

excel file is not opening in outlook 2010.
In outlook the excel attached file if its selected the preview is grayed out. not able to open it.
wat should be done to resolve it?

Hi,
Can you download the attachment to local and open it? Does other types of attachment have this issue?
Please check the following settings:
Go to File -> Options -> Trust Center -> Trust Center Settings -> Attachment Handling -> Make sure "Turn off attachment Preview" is not selected -> Click "Attachment and Document Previewers" button -> Make sure "Microsoft
Excel previewer" is selected -> OK -> OK -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

NEF files are not opening

I don't know what I am doing wrong, but my NEF files will not open in Bridge or ACR. If I click on the NEF icon that is shown in bridge it opens it in Photoshop but I cannot view the thumbnails in Bridge or use ACR with those files. Any suggestions?

jkbraun wrote:
… I just installed the 5.7 update with the automatic setup. ( I have CS4)
If you used the installer, then you cannot possibly have the plug-in in the wrong place. Disregard the other poster's misdirection.
For the record, the correct path is as follows:
Command-Click on thumbnail to see full-size image in a new tab
What you need to do is Purge the Cache through the Tools menu in Bridge: Tools > Cache > Purge Cache for folder "xxxyyyzzz" for the offending folder(s).
DO NOT use the global Purge Cache command in Bridge Preferences; it's broken.
Command-Click on thumbnail to see full-size image in a new tab
Wo Tai Lao Le
我太老了

Some of the MPP file are not opening in MS Project 2013

I have upgraded Project Server 2010 to Project Server 2013. I am facing issue with Task List which is not opening in MS Project 2013. While some of the Projects are working fine with MS Project 2013 with all checkin and checkout functionality.
While i try to open the MPP/Task List. It's giving me error like "Unable to check in project. Ask Administrator to do the Force checkin". After Force checkin also problem remains same.
Could you please help me on this.
Thanks
Rajiv Kumar Srivastava

Hi Rajeev,
Since the issue is more related to Project server 2013 products, and here we do not have sufficient information and resource to offer. I'd recommend you ask the question in Project server forum for professional assistance. For your convenience:
http://social.technet.microsoft.com/Forums/projectserver/en-US/home?forum=projectprofessional2010general%2Cprojserv2010setup%2Cprojectserver2010general%2Cproject2010custprog&filter=alltypes&sort=lastpostdesc
Or you could open a case via http://support.microsoft.com/ph/931
Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support

Project file will not open

I have project file that will not open-and crashes LOGIC X everytime I try.
Can I salvage this?
BTW I FIND THIS NEW LOGIC X VERY BUGGY AND IT CRASHES ALL THE TIME.
I always send in the report to Apple, to no avail.
I might go back to 9.

Is the project file one that originated in LP9 or is this a brand new project created in LPX?
Have you tried importing the tracks from this project one at a time.. using the Selective Track Import (STI) feature.. to help you diagnose which track and what exactly in that track, is the root cause of the issue?
The following video is for LP9 but STI works much the same way in LPX too....
http://support.apple.com/kb/VI255?viewlocale=en_US&locale=en_US
As for the crashes you are having.. please post up a full crash log when it happens so we can take a look and see what exactly is the cause of the crash as frequent crashes in LPX is not normal behaviour and is usually caused by non compatible or out of date drivers, plugins or hardware related issues or other software installed on the Mac causing conflicts... and not Logic Pro X itself.

Prel 13 saved project files will not open, or Prel stops working.

         Sandgrass-Saved files of Prel 13 projects will not open in Prel 13. Is there any way to reclaim/alter these files to where they will open? Could there be a missing codec?
        My computer—Hpe 580t, Win 7 Professional 64-bit OS with second internal 1 TB hard drive;
           Intel R Core, TM i7 CPU 950 @ 3.07 GHz,      RAM 9.00GB
All of my clips and stills were taken on my Nikon CoolPix P500. They will import just fine from PSE organizer or from Prel 13 organizer and I can edit just fine. The trouble seems to be when I attempt to open the saved project files for further editing or adding movie theme and scene markers for a 54-minute movie.
                   I have tried opening from within Prel 13 and from the stored files on my Data Drive E:. Prel opens the project and tries to load; then an error msg appears: “Premiere Elements has stopped working. Windows will close the program and let you know if a solution is found”, or an error message says "Cannot open:---this file is not compatible with Pre"l. Only one copy of several edited and rendered copies of the project will open, and I am very afraid to touch it until someone can maybe suggest a solution. I tried saving copies of the one working file, but none of them will open. Thank you for your assistance.      Sandgrass

LionkillerArt
Did you say that you were working on Windows or Mac? For now, assuming Windows,
1. Go to the Adobe Folder in Documents (should be there unless you changed the default).
2. Locate the project.prel file of interest in Adobe Folder/Documents Folder/Premiere Elements Folder/11.0 Folder. Inside the 11.0 Folder, among some folders and other files, are the project.prel files if you did not do any special organization. Right click the project.prel of interest and select Open With, followed by Premiere Elements 10. Does the project now open?
Do you have any versions of Premiere Elements on your computer except this Premiere Elements 10?
Have you deleted or moved any of the source media that went into your project after you saved/closed any of these projects? Where are your source media stored? If on an external hard drive, is the drive letter of that drive changing on its own?
What happens if you rename one of the problem project.prel files in the Adobe Folder and then try to open it from there?
Just some thoughts for now.
We will be watching for further developments.
Thanks.
ATR

Help: FCE 2.0.3 project files will not open in FCE 4.0

I have been using FCE 2.0.3 on a PowerBook G4 and PowerPC G5 to annotate a number of movie files with markers. I recently bought a new MacBook Pro with Intel and the new FCE 4.0. The new FCE launches when I double click on a FCE 2.0.3 project file, but then I get the following message:
This project is unreadable or may be too new for this version of Final Cut.
I really NEED to be able to open these older project files with all of the markers and sequences intact. Can anyone help???

Hello Tom,
Thank you so much for your help. I spent about 2 hours on the phone with a very dedicated
Video Tech support person from Apple, and, unfortunately, we did not manage to solve the
problem. He also had me email a project file to him, which he was able to open. He then saved it as a FCE 4.0 project file and emailed it back to me. However, I was still unable to open it (I got the same message as with the original).
Here's what I think the problem may be: I moved all my FCE 2.0 project files and media
from my PowerBook G4 to my new MacBook Pro using Apple's Migration Assistant BEFORE I
installed FCE 4.0 on my new MacBook Pro (no version of FCE was installed on it
beforehand). So, I think that the problem may have something to do with the fact that the
Final Cut Express Documents folder existed already on my laptop when I installed the
program.
The reason that I think this is that this morning I installed FCE 4.0 on my Mac Mini (with Intel and running Leopard OS 10.5.1) BEFORE I transferred one of the FCE 2.0 project files and associated media to it. I was ABLE to open the project file -- I received the message "The file format of this project is from an earlier version. Would you like to update this project file?" I went ahead and updated the file, and, then I was able to open it without any problem.
So, my current plan is to delete FCE 4.0 from my MacBook Pro as well as the Final Cut
Express Documents folder that contains all of my FCE 2.0 project files. Then I will
reinstall FCE 4.0 and, after that, I will copy the FCE 2.0 project files to the Final Cut
Express Documents folder that is created.
I will let you know if this is successful.
Thank you (and Peter) for your help!
- Kathy

LabVIEW project files are not opening

Similar Messages

Maybe you are looking for