Labview Remote conection and acquire sound and image

Good afternoon for everyone,
What I want is the following:
1. º How do I record values from a graph in Excel by pressing a button (eg recording).
2. º How do I show my power picture and sound on my pc through the microphone and webcam laptop by pressing two buttons, for example sound "on" and picture "on" and do the "off" to both.
3. º How do I power fizar my IP, since I already did what was on this page and I can not communicate with any other PC.
http://redacacia.me/2010/10/15/internet-control-of-a-labview-vi-part-ii/
Please find attached the program.
Thank you and if I can help thanks a lot!
Best Regards,
FASP
Attachments:
imaqUSB.llb ‏174 KB
Menu_Final_tabs.vi ‏5532 KB

I'm sorry, but from your description I have no idea what you are trying to do. Ok, I see that LV is doing something, and that you want to acquire sound and images, and that the web is apparently involved. But,
How is Excel involved?
What is the web interface doing?
Where are the buttons you talk about pressing located? 
What are the sound and video sources?
What version of LV are you using?
What is the network you are using?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

  • I have a number of apps on my Ipad2 that no longer have sound. I have checked setting on my ipad and the settings on the apps that have a settings and the sound and volume are ok. Do I have a virus in some apps?

    I have a number of apps on my ipad2 tha no longer have sound.  I have checked the ipad settings and the apps that have settings and all sound and volume are ok.  Do I have a virus?  Pandora sound is ok. It seems mostly to be games...angry birds, tap tap, and educational games for little ones. Any suggestions?

    There aren't any viruses for iOS devices. Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

    My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

    This morning i was not able to hear sound on my recently purchased  macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound  box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
    Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

  • I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    Hi nitramred,
    To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Take care,
    Alex H.

  • Which Mac is best for music purposes?  I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in.  I'm looking at MacBook Pros; any tips?  13" or 15"?

    Which Mac is best for music purposes?  I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in.  I'm looking at MacBook Pros; any tips?  13" or 15"?

    I would think a 15" with the i7 CPU. You can get a 13" with the i7 CPU but the 15" has a dedicated graphic chip along with the intergrated one.
    You will also need to upgrade the hard drive to a faster 7200RPM model instead of the standard 5400RPM model that comes with all MBPs. The Sibelius website recommends the 7200RPM or a SSD. You will also be better off installing 8GBs of RAM.
    Both of those upgrades can be made after you buy a MBP for much less then Apple charges for the same upgrades and you get to keep the original RAM and hard drive.

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Keyboard sounds and lock sound and recharge sound not functioning even though "on" in settings. What to do?

    Keyboard sounds, lock sounds and recharge sound don't sound even though "on" in settings. What to do?

    Hi there,
    I would recommend taking a look at some of the troubleshooting stepd found in the article below.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    -Griff W.

  • MSI (ATI) Theater 550 Pro has fuzzy and quiet sound and perfect picture

    I have just brought an MSI (ATI) Theater 550 Pro. It is connected to the antenna on the roof, and I am located in New Zealand (PAL) if that makes any difference. I have previously had problems with MPEG2 codecs, not that I see how that could be related.
    My problem is that although I get a perfect picture, I do not get any sound. If I turn the sound up to full volume, I can just make out the beat of the music on TV in the fuzz that is outputed.
    I have:
    Windows Media Center 2005
    MSI (ATI) Theater 550 Pro

    Ok, that was a bit simpler than I expected.
    I just downloaded a new ATI driver (from ATI site)

  • I just bought my new iphone 4s and when I make a call or receive a call i can barely hear them. I have gone to settings and to sounds and turn it all the way up, but it doesn't help. What else can I do?

    I just bought my new iphone 4s and when I make a call or receive a call I can barely hear them.

    Plastic packaging film?

  • Sometimes I get a static band and no sound and sometimes I don't and I cannot understand why

    I have a Panasonic Viera TX-P42VT30B tv and Panasonic SC-BTT362 Blu ray Home Theatre System connected by HDMI

    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Try the Apple TV with another TV

  • The problem of sound and vibration assitant wiht labview 8.6

    when importing lavview vis into the sound and vibration assistant,  i got the error as follows:
    LabVIEW:  The software installed on this computer does not support the file format you requested. The Storage VIs access files through plug-in libraries LabVIEW and DIAdem install. Visit ni.com to download the library you need.
    how can i solve it?

    Can you please describe the procedure you are following to reproduce this error?
    File>>Import can be used to import snapshots from other projects or logs from other projects or (*.tdms) files.
    The 'Run LabVIEW 8.6 VI' Step can be used to run LabVIEW VIs from the Sound and Vibration Assistant. Consult the help as there are a number of steps that must be followed to use this feature.
    Does your VI perform file I/O? What versions of Sound and Vibration Assistant are you using? Can you post your project and built LabVIEW VI?
    Doug
    NI Sound and Vibration

  • Sound output with sound and vibration toolkit

    Hi!
    Wants to setup a system with two microphones that are connected to DAQ NI USB-9162 and perform a Frequency Response between them where one of them has the undisturbed signal (close in space) and the other the respons (further away). My problem is that I want to send out noise or multitone through labview to an amplifier with internal D/A connected to my USB (turns up as a soundcard in windows). I can not find this option to send out sound in the sound and vibration tool.
    Using evaluation version of both Labview and the sound and vibration kit since I wanted to see if it was possible to perform this application with Labview. Feels close but lack the success still.
    Best regards
    Fredrik

    Fredrik76 wrote:
    Ok so I have to use the Labview interface instead of the sound and vibration toolkits interface? I see the sound out option in Labview where my card apperas but not in the sound and vibration toolkits interface. Guess I have to add the options for the analysis manually then?
    It should be easy to do some modifications if you have some code doing what you want, but not with a sound card. If you have some code just post it. So I can take a look. Note that sound cards do not support all sample rates. But all sound card do support 44100 Hz as sample rate. And newer sound card also higher rates. And how good your setup will be. Will depend somehow on your sound card. But by all means give it a try  
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Need help finding Sound and Vibration Toolkit Example Files

    I need help finding some Sound and Vibration Toolkit Example Files?
    http://www.ni.com/white-paper/3779/en
    From this link you get:  getting_started_otb.llb
    The missing files are:
    OAT Truncate Time Indices.vi
    Speed profile.ctl
    oa_Config Time or RPM Segment.vi
    svl-Complex Datatype Default.vi
    Running Windows 7, LabVIEW 2011, 32bit
    Sound and Vibration Measurement Suite
    Sound and Vibration Toolkit
    Thanks,
    -SS
    Solved!
    Go to Solution.
    Attachments:
    License S and V.png ‏4 KB

    SS,
    You can find these files here:
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Tach Process\SubVIs
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\Sound and Vibration\Order Analysis\Resample Order Tracking\SubVIs
    svl-Complex Datatype Default.vi changes to svc-Complex Datatype Default.vi
    C:\Program Files (x86)\National Instruments\LabVIEW 2011\vi.lib\addons\_NISVFA\_Shared subVIs\Common
    Make sure you are license activated, and you will have to dig through the *vi and relink a subvi.
    Then you should get a white arrow.
    -SS 

  • Why are Sound and Vibration Toolset examples missing?

    I have installed the November Developer Suite CDs, the full Sound and Vibration Toolset and appropriate NI-DSA/NI-DAQ drivers for my PCI-4552. Why aren't all the SVTXMPs found? Specifically, Engine Run-up and Transient Analysis examples are missing from Labview->Find Examples->Browse->Toolsets and Modules->Sound and Vibration.

    I think the examples are there, they've just been installed in a different path from the one the "Search Examples" app is looking for. Try:
    C:\Program Files\National Instruments\LabVIEW 6.1\examples\Sound and Vibration\Transients Analysis
    This should get you to the examples your looking for.
    Criag

  • Sound and vibration colormap to measurement file

    Evening,
    Still pretty new to the both labview and the sound and vibration suite so probably a basic question on data types i cant get my head round.
    I want to the data from a colormap to a tdms file for future analysis but cat get the correct type of data for the measurement file function
    Essenstially i've used used the 3rd order function for a while when writing motor gearbox specifications, so not just sound pressure level but also type of noise (eg happy baby at 60dB vs screaming baby at 60dB)
    I want to go a step further and see how these values change over short periods of time hence colormap but cant seem to be able to record the data.
    I've attached a very basic vi of what i want to do and left the 'bad data type wire' in to show what i want to achive.  i've searched extensively all the normal places but been unable to find any discussions or examples close.
    Any help would be greatfully
    Received
    Martin
    Attachments:
    Sound Map_v002.vi ‏146 KB

    Hello Mjm1968,
    When you hover over the broken wire with Context Help on (Ctrl-H), you can see that it's a bundle of multiple data types.  Right click on the broken wire, and you can go to Cluster, Class, & Variant Palatte » Unbundle By Name.  Attach the left side of that node to the wire, and you can break out all of the components of the signal, which you can feed to a Build Array node (as necessary), and then into a Write to Measurement File VI.  If that slows down your loop too much, we can look into some other options, but that may be the simplest solution to writing to a TDMS file.
    Chris H
    Applications Engineer
    National Instruments

Maybe you are looking for

  • Help needed with RA with Sales order scenario

    Hello Gurus, We are using SD-RR right now for our sales orders. We are facing difficulty with timing cost posting in that scenario and need your help with same. When we do PGI cogs posting is done. RR usually happens at at later point of time after c

  • Specifying table with jdbc-class-map-name

    Greetings How do I specify the name of the table to map to when using the jdbc- class-map-name hint? In my jdo file, I have specified: <class name="Customer" objectid-class="CustomerId"> <extension vendor-name="kodo" key="jdbc-class-map-name" value="

  • Java not running with windows 7 and IE 9

    Hi, I have a new laptop window 7 operating system and i have downloaded Java 7 and have IE 9. But, my Oracle applications is not running. Does/ did anybody have this problem?? Please advise. Thanks in advance, Vasu

  • Serial number is invalid"" error

    I have an activated version of Premiere Pro CS5.5 installed on a new laptop. I have installed CS6 from a purchased DVD which had no serial number. No I get the error "serial number is invalid"and the CS6 is running as a trial version. How do I find o

  • Import Mpeg4 (m4v) into iMovie?

    I'd like to burn video purchased from iTunes to DVD. I've tried exporting to iMovie and vice versa, i.e. importing the 'm4v' into iMovie. I've also tried creating a playlist and burning directly to DVD using internal SuperDrive. Does anyone out there