Labview: resource not found ; Specifically a VI located in my LV 8.2 Project I am trying to download to my FP-2000 and run.

Hi,
I am fairly new to the LV Project method of building executable files and embeded applications.
I have been using LV 7.2 for the last few years and finally switched over to 8.2 this last summer.
My problem is that I have an embedded application that I need to troubleshoot, but every time I try and run it from my desktop, it hits me with one of these messages:
Deploying MPPT-Testbed (successfully deployed target settings)
Deploying ErrorConvert.vi (already deployed)
Deploying FP Close(IO).vi
Failed to download FP Close(IO).vi
LabVIEW: Resource not found.
LabVIEW: Resource not found.
The FP Close(IO).vi is the latest issue, I have had other files that have failed to load as well. I have attempted to make a common folder for all of my shared VIs, I have 6 FP-2000 controllers.
Any ideas?
I run LV 8.2 w/RT on my desktop, my FP-2000 is running LV 8.2, FP Drivers 5.2.0 and FP VI Manager 4.1.0
-Bill

Hi Bill,
Since you produced code in a previous version of LabVIEW, and therefore previous FieldPoint driver version, you will need to revamp your code a little to be able to use it in LV 8.2 with FieldPoint 5.0. I'm assuming that the FP Close.vi is not available in the palette that is not available in LabVIEW 8.2. This is expected, as FieldPoint 5.0 utilizes different VIs than previous versions. Accordingly, you do not need to use the FP Open or FP Close VIs, as they are not available in this driver version. However, you only need to use a Browse I/O Point and either a FP Read, FP Write or FP Read/Write. Generally, a quick modification of your code will take care of this problem. Let us know if you need help with this; a screenshot of your code might be helpful. Thanks!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Similar Messages

Labview: resource not found error code 24 when building executable using 8.20 and dsc module

I am trying to build an executable and I keep getting and error and cannot seem to figure out what is wring. The whole error is "LabVIEW: resource not found. An error occured loading "interface 3.vi" Labview load error code 24: this vi cannot be loaded because it is broken and has no block diagram."
I am using LV 8.20 and DSC 8.2. I am trying to create an executable that has the web server running for using remote panels, i have netowrk published shared variables, connecting to a fieldpoint unit, and I am using the NI system tray icon vis to load the program to the system tray.
I have my shared variable library added as a support file, as well as the lvdsc.ini, and the tray icon files. I have sleected "Enable Enhacned DSC run time support" in the app builder, did not remove any type def,etc.
I cannot get the .exe to run on my development machine or another machine, I get the same error. I tried creating an installer that installed the 8.2 runtime, dsc,fieldpoint, variable engine and manager and MAX.
I could not find anything in the help files on the dsc, maybe someone else has some hints. thanks
Kenny

Hi Kenny,
I hope you are doing well today! What is interface 3.vi? Is it possible for you to post your project over here? Also, I would recommend creating a simple DSC application; and would like you to build it. Do you still get errors?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

LabVIEW: Resource not found. when running executable

Hi,
I've made a fully functional vi with LabVIEW 2009 (developer suite) and need to be able to run it on another PC without it. I have downloaded LV Run-Time 2009, but when I try to run the executable I built, I recieve an error which reads:
LabVIEW: Reasorce not found.
An error occurred loading VI 'NI_AALPro.lvliberivative x(t).vi'.
Labview load error code 3: Could not load front panal.
I can run the executable on another PC with LabVIEW no problem. I've read somewhere about the need to stop the front panal from beng removed on sub VIs with Application Builder, although I don't think I have it. I apologise in case this is a dumb question and I appreciate any help.
Cheers
Luke
Solved!
Go to Solution.

Removing or not removing the front panel probably has nothing to do with your problem. My guess is that you did not create an installer. If you had, it would have included lvanyls.dll in a data folder under the folder where your exe was installed.

404 Resource Not Found In UWL for Display Request in Travel Management

Hi Team,
Issue regarding Uwl in Travel Management.In Mss inbox when approver clicks on display form for travel request its throwing error like 404 resource not found.
i have check all uwl iview properties like list actions to be excluded and Xml code etc.
Regards,
Venkat.

Hi Venkat
I hope you are well and many thanks for using the discussion forums .
In relation to the scenario that you have described you mentioned that:
Once a user (via the MSS Inbox) clicks on the display form for travel request you are encountering a 404 resource not found error.
Ok so the first means of analysis is to ensure the UWL Destination Service Configuration is setup and maintained accordingly. Kindly review and consult the documentation below carefully.
SAP Note: 1133821 - UWL Destination Service configuration
After ensuring the destination(s) are setup accordingly and if the issue persists kindly restart the UWL service and clear the UWL cache to see if that resolves the issue.
In the destination configuration kindly ensure there are no discrepancies or misconfigurations.
Now have you navigated to your current connector setup and viewed the status columns to see if there are any exceptions appearing?
Lastly kindly check if the URL being called (at the request page) is correct.
Kindly update me as per your findings.
Kind Regards & All The Best
Troy Cronin - Enterprise Portal Support Engineer

Resource not found or internal server error when trying to edit location

Hi all,
ACS is appliance and version 5.2.0.26.7
The problem is after creating location under all locations.
When trying to click on the location name to edit location profile, there is an error page that shows
"ACS:Resource not found or internal server error"
But if click on the radio button and press the edit button at the bottom of page.
There is no problem.
Any on has the same problem?
Detail step and screen capture in attached file.

I can't find any CDETS that exactly match what you describe but up to patch 10 of 5.2 the follwoing CDETS related to NDGs are included:
CSCtx83260
NDG locations not showing up on GUI
CSCtu02752
ACS 5.2 patch 8 cannot display long lists of NDGs
CSCtu04594
ACS 5.2.0.26.7 - only 50 NDGs shown on GUI with more than 100 configured

While running servlets getting errors 404 or 505 resource not found

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.*
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

nammathamizhan wrote:
Hi all,
I'm novice to J2EE.
You're also a novice to this forum.
First, turn off the bold font.
Second, post your question once and only once to a single forum. You only waited an hour before reposting your question. That's not the way this works. Asking your question multiple times will not increase the likelihood that you''ll get an answer. As a matter of fact, you're guaranteed nothing at all. Give it your best effort and hope for success. This isn't a paid consultancy - we're volunteers.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
If you're correct, and it's deployed, that would suggest that the URL you gave is incorrect.
>
Now let me elaborate what i've done till now.Good info - almost too much.
%

Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

Can someone help me please? I am receiving this error everytime I attempt to execute my application:
LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
Attachments:
labview error.jpg ‏176 KB

We cannot help without additional information:
Are you running your code
...in the development system?
...as a standalone application?
...deployed to an embedded target?
If it is a built application, do you explicitly include dynamically called VIs in the build specification?
Who wrote the program? Do you have access to the code?
How is this VI called? Is there sufficient error handling?
Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
Is it running on the same OS used to develop it ...
LabVIEW Champion . Do more with less code and in less time .

Tomcat v4.1 - Resource not found 500 Error - Help!

Hi,
I am a bit new to Tomcat, but have a really quick question. I am trying to deploy a new single class file to an existing Tomcat 4.1 web application, however, I am using Rational Application Developer 7.0 to create and compile the class. When I deploy the new class to the Tomcat 4.1 web application, the page crashes with a 500 error "Resource not found".
What could be causing this error? When I put the old class back in everything works ok. I have even tried using identical code, so I know it isn't a coding issue. Could it be the JRE being used to compile the class is the wrong type?
Any help would be much appreciated!
Thanks :)

Can you please provide the full error message and stack trace if possible?
Could it be the JRE being used to compile the class is the wrong type?Yes it definitely could be.
What version of java is tomcat running on?
You can find out with the following jsp fragment:
Working with server: <%= application.getServerInfo() %><br>
Servlet Specification: <%= application.getMajorVersion() %>.<%= application.getMinorVersion() %> <br>
JSP version: <%= JspFactory.getDefaultFactory().getEngineInfo().getSpecificationVersion() %><br>
Java version: <%= System.getProperty("java.version"); %><br>

What does "resource not found" mean when loading VI?

I can't seem to open a .vi file. It says:
"Resource not found.
An error occurred loading VI 'dio_trigger_example.vi'.
LabVIEW load error code 8: Could not load VI resource."
I have LabVIEW 5.0 - do I need a newer version, or is the file not working? It is for digital IO using the DAQCard-6533. I was given this file by a NI technician....
Charles Brian Quinn

After more than 10 years later I have the same problem. How to open such VI?
=========================
Igor Titov, CLA
WebPager - put LabVIEW front panels into the web page
Labicom.net
Attachments:
Resource not found problem.png ‏184 KB

Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll

I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll. This is preventing me from transferring my information from my old phone to my new iPhone 5c. Can anyone help me??? A simple restart of the computer did not solve the problem.
Thanks :-)

I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!

BI IP - Upload flat file - "requested resource not found" when typing URL

Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
D

Hi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D

Can't Download from iTunes Store - "Requested Resource Not Found" Error

I am trying to download a couple of (free) apps for my iPhone and iTunes is throwing up an error saying "The requested resource was not found. There was an error in the iTunes Store. Please try again later." Is anyone else having this issue at the moment? Is the store down?

It has been a few hours now. Same problem. "Resource Not Found" error when trying to download apps from the iTunes store. Anyone else having this problem? Anyone NOT having this problem? Anyone?

Having an issue with itunes purchase, message shows "could not complete itunes store request, requested resource not found." My account has been debited for the price of the download, but I dont have the download.

Need some help, I was downloading an album when the message "could not complete itunes store request, requested resource not found." "Error in the itunes store please try again later." My account has been deducted for the amount of the album, but I dont have it downloaded on my computer. Please help!!! Thank you!!!

Does the purchases show in your Purchased list?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
Next contact iTunes by:
Contact iTunes

Error: Resource not found in FilterOptionCollection. Please help

Hi Experts,
I'm currently implementing Approve Requests at a customer.
I've got the service TASKPROCESSING pointing to ERP_WF. I can see the catalog SAP_FND_TC_TX1 and I've created a tile, pointing to my scenario as defined in the netweaver gateway.
When I go to launchpad the reference error message is displayed.
Details on the word file.
Error Resource not found Filter Option Collection - Approve Requests.docx - Google Drive
Thanks in advance!

Thank you Andre,
We finally solved it. I post the correction for future reference.
The problem was solved by changing the configuration on the assignment of the data provider to the data model.
ZTM_TGW_SVC_MODEL_0001_BE software version was DEFAULT, when it should've been /IWPGW/BWF.
The route in SPRO is: SAP Netweaver->Gateway>OData Channel>Administration>General Settings> Assign Data Provider to Data Model.

Outlook for mac, message HTTP error resource not found 18596

outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
Help appreciated!!!!!!!!

Same probelm any suggestions ????

Labview: resource not found ; Specifically a VI located in my LV 8.2 Project I am trying to download to my FP-2000 and run.

Similar Messages

Maybe you are looking for