LabVIEW RT 8.5.1 "reboot due to system error"
I'm running my app on a quad core RT desktop target. The executable runs anywhere from a few minutes to a few hours before the machine reboots. About half the time I get the "reboot due to system error" and the "software state: safe mode" messages. rtlog.txt has no record of the reboot.
Is there any way to get LabVIEW to log any useful data when this happens?
What actions can I take to track this down (other than disabling portions of my code to see what part might be causing it)?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Connect up a display to the RT chassi to see if you get any message there.
In addition, watch your memory useage. If you run out of memory, RT will just STB.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
RT target reboots due to system error
The RT target reboots and displays the following error after the normal setup info:
Reboot due to system error.
Redirecting output to log file.
I don't know where this "log file" is saved and I don't know why the rt engine restarts.
I have 3 PCI 6143 boards and I'm reading at 250 ksamples/sec. I'm storing the data to an RT FIFO (waveform dbl array type) and using TCP to send this to the host computer where I want to display in a graph. The vi on the target computer runs fine without any connection to the host computer. When the vi on the host computer starts up, however, problems start to happen.
The host computer gets the data from the target very slowly. It takes about 5 seconds for TCP Read to read the byte size. The byte size is about 600kb. After the byte size is read the rt engine mysteriously restarts and displays the message above. My system works fine if I change all the waveform dbl array types to DBL Array. The reason I want a waveform type is because the host computer is not getting enough data with the DBL Array. For example, instead of getting a steady, straight line in the graph, I get a line jumping from 0 to the value it's supposed to be over and over.
I'm using vis similar to the vis created by the RT Communication wizard for both the target and host communication.hi Kristi,
thanks for responding.
I'm using Labview 7.1 Real-time on a dell gpx 270 on a LAN (gigabit connection) using static IPs. I'm currently doing continuous analog acquisition on multiple channels (24 total). I have a normal priority loop managing the TCP connection, a time-critical loop within that acquiring data. On the host computer (another dell) I have all normal priority vis. I have 1 VI that contains 2 vis in it- a vi that handles the GUI and a vi that handles the TCP.
I gave up on using waveforms so i'm getting the y-component out of the 1D-waveform that i get from the daqmx vi and putting that into a 1D dbl array and storing it in an rt-fifo. By the upload, hopefully, you can see what i'm talking about. Without using waveforms the rt target does not reboot, but i still get jitter. The host computer (with the gui) seems to be reading an empty fifo more times than it has data. When I put a 100ms wait in the TCP loop on the host computer, I get the data slower, but no jitter. I don't know anything about timing so I'm guessing that's my major problem. Am I supposed to put waits inside of various loops?? I varied my time-critical loop wait time from 1ms to 3ms to see if anything would change, but no changes.
On a side note I will be acquiring data from a total of 13 6143 PCI boards from 5 different PCs when this is all done.
Attachments:
simplesystem.JPG 15 KB -
Reboot due to system error / Register dump from exception handler
hi,
I have a problem with Labview RT when using Reboot function.
The RT target (desktop) reboot but there is a message : Reboot due to system error. And if I reboot once again, the target become in safe mode.
Now, If I look at the log I obtain the following message see more in the log attached!
*** REGISTER DUMP FROM EXCEPTION HANDLER (code 0x80000003) ***
I don't understand why there is this message.
Anybody has an explaination?
Attachments:
Nouveau Document texte2.txt 6 KBjulesjay a écrit:
ok I didn't know that. I will wait for tomorrow.
NI france is not very efficient about labview Real time problems.
There is one or two experts and there aren't easily reachable.
So a lot of question I send stay with no answer.....
That why I hope someone will be able to help me.
Hi Julesjay,
After i have see your log file and the problem, i think NI FRANCE are working on your request for all problems you have in your application.
And i don't understand what you say that, because we have make test, we have send us informations for make different tests, and we are still working on your problem.
I know the problem are not resolved, but we are working for resolve it quickly.
I suggested you to contact the AE that are your service request for have more information.
Best regards,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France -
Specified Driver could not be loaded due to system error 5
Hello,
I am trying to run oracle 9i on my lap top. I installed the package from the website and got everything installed correctly. I checked my sqlnet.ora and tsnnames.ora files and the test connection in the ODBC driver is working fine.
However, as i try and connect to the database through my ASP application i get the error:
Code: 80004005
Specified Driver could not be loaded due to system error 5
I have been searching these forums for an answer and the closest solution i found was that something may be wrong with my path variable. I checked it and everything looks fine, it points to my /bin directory.
I am not sure if it is something wrong with my driver (though i installed the latest one available) or something else. I Would appreciate any help anyone can offer.
Thanks
samir.The user that IIS runs as doesn't have appropriate access to the Oracle directory or to ODBC. There's a good, recent Usenet thread on this
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=3d119df8%240%24234%24ed9e5944%40reading.news.pipex.net&rnum=2&prev=/groups%3Fq%3DASP%2Bsystem%2Berror%2B5%2Bgroup:comp.databases.oracle.*%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26scoring%3Dd%26selm%3D3d119df8%25240%2524234%2524ed9e5944%2540reading.news.pipex.net%26rnum%3D2
I'm assuming that you've verified that you can, say, create a new DSN with the Oracel driver and successfully test it with the "test connection" button.
Justin -
Due to system error, I couldnt backup one of the purchased game. Is it possible to get this game free?
Download Past Purchases
http://support.apple.com/kb/HT2519 -
I recently upgraded from 10g to 11g and upon this upgrade, a website of mine stopped working.
It is a classic ASP website. I added a "testdatabase" page to the website to test the basic functionality of opening a connection. I've pasted the testdatabase page below. Anyways, upon running this page, I get this error:
Specified driver could not be loaded due to system error 127: The specified procedure could not be found. (Oracle in OraClient11g_home1_32bit, D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL).
I have two other environments where I have done the same upgrade and the site works just fine. I have compared all the IIS settings in my other environments to that of the one suffering from the error. Also, in the IIS settings, I have made sure that "Allow 32bit" was checked.
D:\app\oracleadm\product\11.2.0\client_1\BIN\SQORA32.DLL is actually where this DLL resides.
I have also checked to make sure the environment variables are correct.
The very first environment variable in the PATH setting is D:\app\oracleadm\product\11.2.0\client_1\bin; and there are no other references to oracle in the PATH environment variable.
I have done a google search and I've seen that people also tell me to check ORACLE_HOME to make sure it's correct. I've checked this in both of the working environments and there is nothing there. There is also nothing there in the broken environment. What should be there? If anything?
I don't know where else to look. What could be causing this error?
<%
Option Explicit
Response.Expires = 0
Response.Buffer = true
Dim conn
Err.Clear
On Error Resume Next
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open "DSN=RPS11;UID=FFXQM;PWD=ffxqm6prd$"
If Err.Number <> 0 Then
Response.Write (Err.Description & "<br><br>")
Response.End
conn.Close
Set conn = Nothing
End If
conn.Close
Set conn = Nothing
On Error GoTo 0
%>As a temporary solution, add the Administrators group to the IUSR and IWAM userids and see if that works. If it solves the problem, then it IS a matter of setting the users privledges correctly.
-
Specified driver could not be loaded due to system error 126
I have some problem connecting to Oracle through ODBC. It's an ODBC error, but I cannot find anything to help me on the web so I hope someone already encounter this problem and can answer.
So I created a new Oracle Database (SID=orcl) on one of our database server, and a user KRISS with DBA rights. It is Oracle 9i. When I tried to create a new ODBC Data Source , system DSN :
Data Source Name : orcl
TNS Service name : orcl
User ID : kriss.
when I click on Test Connection, I have the following error message :
Unable to connect
SQLState=IM003
Specified driver could not be loaded due to system error 126 ( Oracle in OraHome90)
The configuration of my system is :
Windows 2000 Server SP3 5.00.2195
Oracle 9i
Any help would be great, thanks in advance,
KrissI found the answer in an other part of this forum, thank you Justin for :
'Note that Microsoft doesn't recommend using the Microsoft ODBC driver with an Oracle9 client-- they suggest sticking with 8.1.7.
Now that I use ODBC driver 8.1.7, I can connect to my Oracle 9i db !!! -
Hadoop ODBC linked server error: Specified driver could not be loaded due to system error 182
Hi,
I am trying to connect to a Hadoop server through a linked server in SQL Server. I downloaded and installed the Microsoft Hive ODBC driver - HiveODBC64.msi. But while I am trying to create the Linked server using this ODBC driver I am getting below error.
" Specified driver could not be loaded due to system error 182 (Microsoft Hive ODBC driver, D:\....\HiveODBC64.dll). (Microsoft SQL Server, Error: 7303)"
When I tested it locally and in another server, it is working properly. I am getting this error only in this server. looks like a dll error. But cannot identify where/what is the error. Could someone help me fix this issue.
Server info:
OS Name: Microsoft Windows Server 2008 R2 Enterprise Version 6.1.7601 Service Pack 1 Build 7601
SQL SERVER: Microsoft SQL Server 2008 R2(SP1)Hi LinkedServer,
According to your description, you want to create linked server to connect to a Hadoop server in SQL Server, and you have created it successfully in the test server, the problem is that you get the issue in the production environment, right?
Based on the error message, as you said it seems that the issue is related to the HiveOBDC64.dll assembly. Since you have done it on the test server, you can copy and replace HiveODBC64.dll to production server in the C:\Program Files\Microsoft Hive ODBC
Driver\lib directory. Or you can reinstall the Microsoft Hive ODBC driver. Here is a blog which describe how to create a SQL Server Linked Server to HDInsight HIVE using Microsoft Hive ODBC Driver step by step, please refer to the link below to double check
if your steps are correct.
http://blogs.msdn.com/b/igorpag/archive/2013/11/12/how-to-create-a-sql-server-linked-server-to-hdinsight-hive-using-microsoft-hive-odbc-driver.aspx
Regards,
Charlie Liao
TechNet Community Support -
Discussions Account couldn't be updated due to system error?
Like everyone else, I was excited to check out the new Support Communities design and functionality when it was launched on Saturday. Unfortunately, when I tried to sign in, I got a message that said: "We're Sorry. Your account couldn't be updated due to a system error." It gave me a short form to fill out for help. I did that and still am not able to sign in. Right now, I'm writing from an old Apple ID in order to post this message. The ID that I normally use (and can't use now) has lots of posts, points, etc, and I really need to recover that.
Interestingly, if I search for the username associated with that Apple ID, it comes up and shows all of my posts and my profile, with all of my points intact. So, the information is still there...I just can't access it. Also, the ID works everywhere other than the Support Communities (such as iTunes Store and Apple Store online).
Has anyone else run into this problem? If a Host happens to see this, I'd love any suggestions as to how to get this straightened out. I was quite active on the old discussion boards and would like to continue to be on the new version!I got an email directly from the apple person who manages the support communities. He's been helping lots of people out with the transition. It turns out the root of my problem was having the same email address associated with the two different Apple IDs as the "primary email address." If you have two IDs, that could also be your problem. Make sure they all have different email addresses.
-
Server rebooting due to JAVA error.
Hi
I am sukrut and I have been experiencing some problem on my Fire V880 system.Actually from last day's my server is rebooting auotomatically and when I am trying to investigate the error I am getting following output.
BAD TRAP: type=31 rp=2a1026247c0 addr=0 mmu_fsr=0 occurred in module "unix" due to a NULL pointer dereference
Thanks
SukrutJan 5 15:02:51 nova ^Mpanic[cpu0]/thread=3000854d740:
Jan 5 15:02:51 nova unix: [ID 340138 kern.notice] BAD TRAP: type=31 rp=2a10238a7b0 addr=0 mmu_fsr=0 occurred in module "genunix" due to a NULL pointer dereference
Jan 5 15:02:51 nova unix: [ID 100000 kern.notice]
Jan 5 15:02:51 nova unix: [ID 839527 kern.notice] oracle:
Jan 5 15:02:51 nova unix: [ID 520581 kern.notice] trap type = 0x31
Jan 5 15:02:52 nova unix: [ID 101969 kern.notice] pid=15679, pc=0x10122a58, sp=0x2a10238a051, tstate=0x80001601, context=0x455
Jan 5 15:02:52 nova unix: [ID 743441 kern.notice] g1-g7: ff00, 2000, 0, ffffffff00000000, 0, 0, 3000854d740
Jan 5 15:02:52 nova unix: [ID 100000 kern.notice]
Jan 5 15:02:52 nova genunix: [ID 723222 kern.notice] 000002a10238a3c0 unix:die+80 (31, 0, 10415278, 0, 2a10238a7b0, c458e000)
Jan 5 15:02:52 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000008 0000030001d27cc0 0000030003363838 0000030001d44000
Jan 5 15:02:52 nova %l4-7: 000000000000000a 0000000000000020 0000000000000000 0000030003363708
Jan 5 15:02:52 nova genunix: [ID 723222 kern.notice] 000002a10238a4a0 unix:trap+8b8 (0, 1, 5, 0, 2a10238a7b0, 0)
Jan 5 15:02:52 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000001 0000030002248038 00000300065ecac8 0000000000000000
Jan 5 15:02:52 nova %l4-7: 0000000000000031 0000030008cec0e8 0000000000010000 000002a10238b520
Jan 5 15:02:53 nova genunix: [ID 723222 kern.notice] 000002a10238a5e0 unix:sfmmu_tsb_miss+66c (10429b30, 0, 300001aff88, 0, 300001aff88, 19)
Jan 5 15:02:53 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000000000000004 0000000000000010 00000310001ff100
Jan 5 15:02:53 nova %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000003
Jan 5 15:02:53 nova genunix: [ID 723222 kern.notice] 000002a10238a700 unix:prom_rtt+0 (30000468000, 300050aef18, c211c000, c211a000, 300050aef18, c211a000)
Jan 5 15:02:54 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000002 0000000000001400 0000000080001601 000000001001a898
Jan 5 15:02:54 nova %l4-7: 000000001044bc20 000000001044bc00 0000000000000000 000002a10238a7b0
Jan 5 15:02:54 nova genunix: [ID 723222 kern.notice] 000002a10238a850 genunix:vmem_xalloc+4d8 (30000468000, 30000468408, ffffff, ffffffff, c0000000, c0000000)
Jan 5 15:02:54 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030003973038 ffffffffffffe000 0000030000468000 0000000000002000
Jan 5 15:02:54 nova %l4-7: 00000300050aef18 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:02:54 nova genunix: [ID 723222 kern.notice] 000002a10238a980 pcisch:pci_dma_map_impl+91c (1, 1, 1, 0, 30003972f48, 3000018cc50)
Jan 5 15:02:55 nova genunix: [ID 179002 kern.notice] %l0-3: 000002a10238ac20 0000000000000001 00000300001b9688 0000000000000001
Jan 5 15:02:55 nova %l4-7: 0000000000000001 0000030003973038 0000000000000000 0000000000000000
Jan 5 15:02:55 nova genunix: [ID 723222 kern.notice] 000002a10238aab0 pcisch:pci_dma_bindhdl+38 (3000018d190, 3000018cc50, 30003972f48, 2a10238ac20, 30003363718, 30003363730)
Jan 5 15:02:55 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000018d190 00000300021f5008 0000000008000000 000003000586cf44
Jan 5 15:02:55 nova %l4-7: 0000000000000000 0000000000000004 000000001041cdc8 0000000000000000
Jan 5 15:02:55 nova genunix: [ID 723222 kern.notice] 000002a10238ab70 genunix:ddi_dma_buf_bind_handle+e8 (30003972f48, 3000586ce30, 12, 0, 0, 30003363718)
Jan 5 15:02:56 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000046f440 00000000000000f9 00000000000000f9 00000300021f5048
Jan 5 15:02:56 nova %l4-7: 00000300021f5068 0000030007d3db20 00000300021f4f70 0000000008f9c010
Jan 5 15:02:56 nova genunix: [ID 723222 kern.notice] 000002a10238ac60 glm:glm_scsi_init_pkt+1ec (30003363708, 30003363718, 0, 0, 0, 10)
Jan 5 15:02:56 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000586ce30 0000030001d27cc0 0000030003363838 0000030001d44000
Jan 5 15:02:56 nova %l4-7: 000000000000000a 0000000000000020 0000000000000000 0000030003363708
Jan 5 15:02:56 nova genunix: [ID 723222 kern.notice] 000002a10238ad20 scsi:scsi_init_pkt+54 (30001d27cc0, 30001d047d0, 10220b0c, a, 20, 10)
Jan 5 15:02:57 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010253dfc 0000030002248038 00000000e5798000 000003000430cde8
Jan 5 15:02:57 nova %l4-7: 000003000430cde8 00000000e5798000 000002a763904000 000002a10238b520
Jan 5 15:02:57 nova genunix: [ID 723222 kern.notice] 000002a10238adf0 sd:make_sd_cmd+120 (10220b0c, 3000586ce30, 0, 30001d047d0, a, 0)
Jan 5 15:02:57 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030008cec0e8 0000000008fa0290 0000000000000010 00000000e5798000
Jan 5 15:02:57 nova %l4-7: 00000300002c9f50 0000000000000000 00000310046cc600 0000030002fe1890
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238aec0 sd:sdstart+2cc (ffffffffffffffff, 0, 1, 1000000, 10000, 0)
Jan 5 15:02:58 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030001d04b2e 0000000000000005 0000030001d049a0 0000030001d047d0
Jan 5 15:02:58 nova %l4-7: 0000030001d048d0 000003000586ce30 0000000000000000 0000000000000000
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238af70 sd:sdstrategy+670 (30001d048d0, 10156520, 2a10238b0d8, 0, 0, 3000586ce30)
Jan 5 15:02:58 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030001d047d0 0000000000000000 0000000000002000 000003000430cd58
Jan 5 15:02:58 nova %l4-7: 000002a763904000 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:02:58 nova genunix: [ID 723222 kern.notice] 000002a10238b020 genunix:bdev_strategy+94 (1042fe48, 3000586ce30, 20, 0, 0, 0)
Jan 5 15:02:59 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010218e2c 0000030008e54000 000003000430cde8 000003000830aec0
Jan 5 15:02:59 nova %l4-7: 00000300001b99c0 000002a763904000 0000000000000000 0000000000000000
Jan 5 15:02:59 nova genunix: [ID 723222 kern.notice] 000002a10238b0f0 rdriver:StratStart+2bc (300021f4f70, 30007d3db20, 20, 0, 10419288, 2)
Jan 5 15:02:59 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 00000300021f5008 0000000008000000 000003000586cf44
Jan 5 15:02:59 nova %l4-7: 0000000000000000 0000000000000004 000000001041cdc8 0000000000000000
Jan 5 15:02:59 nova genunix: [ID 723222 kern.notice] 000002a10238b1d0 rdriver:StratOp+44 (300021f4f70, 30007d3db20, 20, 0, f0, 0)
Jan 5 15:03:00 nova genunix: [ID 179002 kern.notice] %l0-3: 00000000104a6c00 00000000000000f9 00000000000000f9 00000300021f5048
Jan 5 15:03:00 nova %l4-7: 00000300021f5068 0000030007d3db20 00000300021f4f70 0000000008f9c010
Jan 5 15:03:00 nova genunix: [ID 723222 kern.notice] 000002a10238b290 rdriver:rd_strategy+218 (30007d3db20, 3000854d740, 2a10238b438, 0, 0, 1ef03)
Jan 5 15:03:00 nova genunix: [ID 179002 kern.notice] %l0-3: 00000300021f4f70 00000000ffffffff 0000000000000000 000002a763906000
Jan 5 15:03:00 nova %l4-7: 0000000000000000 00000300002c9f50 000000001041d000 00000310046cc600
Jan 5 15:03:00 nova genunix: [ID 723222 kern.notice] 000002a10238b380 genunix:bdev_strategy+94 (1042fe48, 30007d3db20, 40, 1, 310046cc600, 2000)
Jan 5 15:03:01 nova genunix: [ID 179002 kern.notice] %l0-3: 000000001028a2c0 0000030002248038 00000000e5798000 000003000430cde8
Jan 5 15:03:01 nova %l4-7: 000003000430cde8 00000000e5798000 000002a763904000 000002a10238b520
Jan 5 15:03:01 nova genunix: [ID 723222 kern.notice] 000002a10238b450 ufs:ufs_getpage_miss+2e4 (30007d3db20, 310046cc600, 1, 2000, 2a10238b750, 3000430cd58)
Jan 5 15:03:01 nova genunix: [ID 179002 kern.notice] %l0-3: 0000030008cec0e8 000002a763904000 000003000430cde8 00000000e5798000
Jan 5 15:03:01 nova %l4-7: 00000300002c9f50 0000000000000000 00000310046cc600 0000030002fe1890
Jan 5 15:03:01 nova genunix: [ID 723222 kern.notice] 000002a10238b540 ufs:ufs_getpage+6b0 (2000, 1, 3000430ce98, 1, 1, 2000)
Jan 5 15:03:02 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000002000 000003000430cde8 0000000000002000 000003000430cd58
Jan 5 15:03:02 nova %l4-7: 000002a763904000 0000000000000000 000002a10238b750 00000000e5798000
Jan 5 15:03:02 nova genunix: [ID 723222 kern.notice] 000002a10238b680 genunix:segmap_fault+110 (2000, e5798000, 2a763904000, 0, 0, 1)
Jan 5 15:03:02 nova genunix: [ID 179002 kern.notice] %l0-3: 000000001017550c 00000300000cac00 000003000430cde8 00000000e5798000
Jan 5 15:03:02 nova %l4-7: 00000300001b99c0 000002a763904000 00000300001aff88 0000000000000000
Jan 5 15:03:02 nova genunix: [ID 723222 kern.notice] 000002a10238b770 genunix:segmap_getmapflt+42c (2a763904000, 2a763904000, 300008db860, 4600, 10443640, 10443840)
Jan 5 15:03:03 nova genunix: [ID 179002 kern.notice] %l0-3: 00000000e5798000 00000000e57a8000 000003000430cde8 000000006007b1e5
Jan 5 15:03:03 nova %l4-7: 00000000000008c0 00000000018c287c 00000000e5798000 00000300008db860
Jan 5 15:03:03 nova genunix: [ID 723222 kern.notice] 000002a10238b840 ufs:rdip+2ec (e5798000, 0, 3000430cea0, 2a10238bac0, 0, 3000430ce98)
Jan 5 15:03:03 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0000030003032000 0000000000000001 0000000000000000
Jan 5 15:03:03 nova %l4-7: 000003000430cd58 000002a10238bab0 0000000000002000 000000001041b900
Jan 5 15:03:03 nova genunix: [ID 723222 kern.notice] 000002a10238b930 ufs:ufs_read+ec (30001049d48, 2a10238bab0, 30002fe1890, 3000430cd58, 0, 8)
Jan 5 15:03:04 nova genunix: [ID 179002 kern.notice] %l0-3: 000003000430ce98 0000030008e54000 0000000000000003 000003000830aec0
Jan 5 15:03:04 nova %l4-7: 0000000000000000 0000000093c9459c 0000000097e5abb0 0000000000000000
Jan 5 15:03:04 nova genunix: [ID 723222 kern.notice] 000002a10238b9f0 genunix:pread64+170 (2043, 30007c92820, 195, 3000430cde8, 2000, 2000)
Jan 5 15:03:04 nova genunix: [ID 179002 kern.notice] %l0-3: 0000000010170630 0000000000000000 00000000e5798000 0000000000000000
Jan 5 15:03:04 nova %l4-7: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
Jan 5 15:03:04 nova unix: [ID 100000 kern.notice]
Jan 5 15:03:05 nova genunix: [ID 672855 kern.notice] syncing file systems...
Jan 5 15:03:34 nova unix: [ID 836849 kern.notice]
Jan 5 15:03:34 nova ^Mpanic[cpu0]/thread=3000854d740:
Jan 5 15:03:34 nova unix: [ID 715357 kern.notice] panic sync timeout
Jan 5 15:03:34 nova unix: [ID 100000 kern.notice]
Jan 5 15:03:34 nova genunix: [ID 353387 kern.notice] dumping to /dev/md/dsk/d5, offset 429588480
Jan 5 15:04:17 nova genunix: [ID 409368 kern.notice] ^M100% done: 47759 pages dumped, compression ratio 2.85,
Jan 5 15:04:17 nova genunix: [ID 851671 kern.notice] dump succeeded
Jan 5 15:05:02 nova genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_117350-15 64-bit
Jan 5 15:05:02 nova genunix: [ID 913632 kern.notice] Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Jan 5 15:05:02 nova genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:b:7:77
Jan 5 15:05:02 nova unix: [ID 389951 kern.info] mem = 4194304K (0x100000000)
Jan 5 15:05:02 nova unix: [ID 930857 kern.info] avail mem = 4075282432
Jan 5 15:05:02 nova rootnex: [ID 466748 kern.info] root nexus = Sun Fire 880
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch1 at root: SAFARI 0x8 0x600000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch1 is /pci@8,600000
Jan 5 15:05:02 nova qlc: [ID 171021 kern.info] Qlogic FCA Driver v20040825-1.40 (0)
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch0 at root: SAFARI 0x8 0x700000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch0 is /pci@8,700000
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch2 at root: SAFARI 0x9 0x700000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch2 is /pci@9,700000
Jan 5 15:05:02 nova rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Jan 5 15:05:02 nova genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Jan 5 15:05:02 nova qlc: [ID 637753 kern.info] NOTICE: qlc(0): Firmware version 2.1.140
Jan 5 15:05:03 nova qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0): Loop OFFLINE
Jan 5 15:05:03 nova pcisch: [ID 370704 kern.info] PCI-device: SUNW,qlc@2, qlc0
Jan 5 15:05:03 nova genunix: [ID 936769 kern.info] qlc0 is /pci@8,600000/SUNW,qlc@2
Jan 5 15:05:03 nova genunix: [ID 936769 kern.info] fp0 is /pci@8,600000/SUNW,qlc@2/fp@0,0
Jan 5 15:05:05 nova qlc: [ID 686697 kern.info] NOTICE: Qlogic qlc(0): Loop ONLINE
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 13=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 14=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 15=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 16=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 17=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 18=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova fctl: [ID 517869 kern.warning] WARNING: 19=>fp(0)::fp_adisc_intr: Perform LOGO.cmd_flags=0, fp_retry_count=5, ulp_pkt=0
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd0 at fp0: name w21000004cf789d7a,0, bus address ef
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd0 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf789d7a,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf789d7a,0 (ssd0) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd1 at fp0: name w21000004cf78a217,0, bus address e2
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd1 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a217,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a217,0 (ssd1) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd4 at fp0: name w21000004cf78a242,0, bus address e4
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd4 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a242,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a242,0 (ssd4) online
Jan 5 15:05:05 nova scsi: [ID 799468 kern.info] ssd3 at fp0: name w21000004cf78a0a7,0, bus address e0
Jan 5 15:05:05 nova genunix: [ID 936769 kern.info] ssd3 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a0a7,0
Jan 5 15:05:05 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:05 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a0a7,0 (ssd3) online
Jan 5 15:05:06 nova scsi: [ID 799468 kern.info] ssd2 at fp0: name w21000004cf78a225,0, bus address e1
Jan 5 15:05:06 nova genunix: [ID 936769 kern.info] ssd2 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a225,0
Jan 5 15:05:06 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:06 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a225,0 (ssd2) online
Jan 5 15:05:06 nova scsi: [ID 799468 kern.info] ssd5 at fp0: name w21000004cf78a3c6,0, bus address e8
Jan 5 15:05:06 nova genunix: [ID 936769 kern.info] ssd5 is /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a3c6,0
Jan 5 15:05:06 nova scsi: [ID 365881 kern.info] <SUN36G cyl 24620 alt 2 hd 27 sec 107>
Jan 5 15:05:06 nova genunix: [ID 408114 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf78a3c6,0 (ssd5) online
Jan 5 15:05:06 nova scsi: [ID 243001 kern.info] /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp0):
Jan 5 15:05:06 nova ndi_devi_online: failed for scsiclass,0d: target=dc lun=0 ffffffff
Jan 5 15:05:07 nova swapgeneric: [ID 308332 kern.info] root on /pseudo/md@0:0,2,blk fstype ufs
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@1 (glm0):
Jan 5 15:05:07 nova Rev. 4 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@1, glm0
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm0 is /pci@8,700000/scsi@1
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@3 (glm1):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@3, glm1
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm1 is /pci@8,700000/scsi@3
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@3,1 (glm2):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@3,1, glm2
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm2 is /pci@8,700000/scsi@3,1
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@5 (glm3):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@5, glm3
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm3 is /pci@8,700000/scsi@5
Jan 5 15:05:07 nova scsi: [ID 365881 kern.info] /pci@8,700000/scsi@5,1 (glm4):
Jan 5 15:05:07 nova Rev. 5 Symbios 53c875 found.
Jan 5 15:05:07 nova pcisch: [ID 370704 kern.info] PCI-device: scsi@5,1, glm4
Jan 5 15:05:07 nova genunix: [ID 936769 kern.info] glm4 is /pci@8,700000/scsi@5,1
Jan 5 15:05:08 nova scsi: [ID 193665 kern.info] sd15 at glm1: target 0 lun 0
Jan 5 15:05:08 nova genunix: [ID 936769 kern.info] sd15 is /pci@8,700000/scsi@3/sd@0,0
Jan 5 15:05:08 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 43084 alt 2 hd 64 sec 64>
Jan 5 15:05:10 nova scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Jan 5 15:05:10 nova genunix: [ID 936769 kern.info] sd6 is /pci@8,700000/scsi@1/sd@6,0
Jan 5 15:05:12 nova scsi: [ID 193665 kern.info] sd125 at glm1: target 0 lun 2
Jan 5 15:05:12 nova genunix: [ID 936769 kern.info] sd125 is /pci@8,700000/scsi@3/sd@0,2
Jan 5 15:05:12 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 17232 alt 2 hd 64 sec 64>
Jan 5 15:05:12 nova scsi: [ID 193665 kern.info] sd126 at glm1: target 0 lun 3
Jan 5 15:05:12 nova genunix: [ID 936769 kern.info] sd126 is /pci@8,700000/scsi@3/sd@0,3
Jan 5 15:05:12 nova scsi: [ID 365881 kern.info] <Symbios-StorEDGEA1000-0301 cyl 17232 alt 2 hd 64 sec 64>
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver1 at rdnexus2: target 0 lun 0
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver1 is /pseudo/rdnexus@2/rdriver@0,0
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver3 at rdnexus2: target 0 lun 2
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver3 is /pseudo/rdnexus@2/rdriver@0,2
Jan 5 15:05:13 nova scsi: [ID 193665 kern.info] rdriver4 at rdnexus2: target 0 lun 3
Jan 5 15:05:13 nova genunix: [ID 936769 kern.info] rdriver4 is /pseudo/rdnexus@2/rdriver@0,3
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_trans failed
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_raid failed
Jan 5 15:05:13 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_hotspares failed
Jan 5 15:05:14 nova genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_sp failed
Jan 5 15:05:14 nova pcisch: [ID 370704 kern.info] PCI-device: ebus@1, ebus0
Jan 5 15:05:14 nova platmod: [ID 531893 kern.warning] WARNING: Failed to install "gptwo" driver.
Jan 5 15:05:22 nova ebus: [ID 521012 kern.info] todds12870 at ebus0: offset 1,300070
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] todds12870 is /pci@9,700000/ebus@1/rtc@1,300070
Jan 5 15:05:22 nova rootnex: [ID 349649 kern.info] mc-us30 at root: SAFARI 0x0 0x400000 ...
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] mc-us30 is /memory-controller@0,400000
Jan 5 15:05:22 nova rootnex: [ID 349649 kern.info] mc-us31 at root: SAFARI 0x2 0x400000 ...
Jan 5 15:05:22 nova genunix: [ID 936769 kern.info] mc-us31 is /memory-controller@2,400000
Jan 5 15:05:24 nova pcisch: [ID 370704 kern.info] PCI-device: usb@1,3, ohci0 -
ODBC driver could not be loaded due to system error code 1114
Hi!
We have an application with an ODBC connection. The ODBC connection is working properly in my developer machine, via remote desktop and using it directly, in my test machine (virtual machine, accessed by remote desktop), and in the far test place, accesed by remote desktop, used by admin user or normal user. But if the tester uses the far test machine (Win XP SP3) directly, the app can't create ODBC connection: 1114.
Instant client directory is in the path, sqlplus is working correctly used directly or via remote desktop.
I tried Instant Client 11.2.0.3.0, 11.2.0.2.0, 11.1.0.7.0, 10. 2.0.4, 10.1.0.5, downloaded from Oracle web site.
We did a test with process monitor. Via remote desktop loaded the sqora32.dll, called may times IRP_MJ_READ - I don't know this operation, and continued loading the dependencies: oci.dll, OraOCIEI11.dll and so on, the result was OK. Directly accessed the test computer, the sqora32.dll was loaded but did not called the IRP_MJ_READ operation. Found and loaded the oci.dll, found the OraOCIEI11.dll but did not loaded. Not tried and failed but did not loaded. And the result was 1114.
Directly loading the driver dll, LoadLibrary failed and GerLastError reports 183 - ERROR_ALREADY_EXISTS.
There is Remote Desktop group on the test machine, of course, but there is not specified any special security settings for it. I checked groups, the instant client directory and it's dlls.
I haven't any really fine idea.
ImreXP System error 1114 is, I believe, "A dynamic link library (DLL) initialization routine failed." That could mean several things, including (but not limited to):
1) The setup file that you tried to install is corrupt and a re-download is needed;
2) the .dll your install requires is corrupt, and a system re-install is suggested;
3) the .dll your install requires is too old or too new and a different version of the download is required.
Hard to tell from the actual messages, OS and Oracle version information and other useful stuff you have [not] posted. -
ERROR [IM003] Specified driver could not be loaded due to system error 1114
I'm seeing this error when I try to run an ASP.NET project within visual studio 2008. I've just upgraded to Windows 7. This all worked, of course, under XP.
I'm using Oracle 10g. I can connect to the databases using SQLDEVELOPER. All of my ODBC Datasources test fine.
The rest of the error is (Oracle in OraClient10g_home2, C:\oracle\product\10.2.0\client_2\BIN\SQORA32.DLL).
The file is there. I opened up the permissions on the Oracle directory, so I don't think it's permissions related. I've seen a few similar errors in the forums, but no valid solutions. What's going on here?Is the 10g database on the local Windows 7 server ? If so, 10g is not supported/certified on Win 7, so things may or may not work.
HTH
Srini -
Specified driver could not be loaded due to system error 1111 (Oracle in XE
Trying to connect to Oracle DB from VB6
DSN will register and test is successful in ODBC Data Source Administrator but receive above error msg when trying to connect.
Connect_String = "DRIVER={Oracle in XE};UID=hr;PWD=hr;DBQ=XE;DBA=W;"
Connect_String = "dsn=XE Connect;UID=hr;PWD=hr;DBQ=XE;DBA=W;"
(neither works, same error)
receive same error when trying to connect from MS Access to Oracle via ODBC
W2k Professional sp4
VB6 sp6
Anyone have a solution?
ThanksAre you sure the db is up & running?
Has it worked before?
Can you access the database manually?
Have you tried to restart the OATS application service?
Have you checked if there is a OTM schema in the XE instance?
What is the ATS version?
What is your operation system?
What is your locale?
JB -
Remote system reboots due to error when exporting config.
I have a PXI-8196 controller operating on a network in a PXI-1052 chassis. I am trying to export the config and the remote system reboots due to system error.
Your Computer looks to be a Late 2010 iMac, if so is the RAM spec as shown below?
Maximum Memory
16 GB
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM -
"System error KERNEL.446571: 1528: Internal error detected by SMP multi-tasker" in LabVIEW RT 8.5
When I try to run my startup executable on LabVIEW RT 8.5 I get the message "System error KERNEL.446571: 1528: Internal error detected by SMP multi-tasker". What does this mean? How do I get around it? Has anyone else seen something simliar?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
EndigitJust crashed again with the same error. This time it was accompanied by a support.cpp error line 1112. The data in the error log file (rtlog.txt attached) doesn't seem to correlate with the crashes I'm seeing. I think a lot of the crashes aren't getting logged at all. The latest development is crashes after it's been running a while (1528 & 1510 happen on startup). The RT desktop simply reboots without showing or logging an error. Any way to track that down? Does this file mean anything more to you than me? I don't feel like I have enough material or info to create an SR.
Thanks,
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Attachments:
rtlog.txt 548 KB
Maybe you are looking for
-
My itunes is asking for a kind of pasword while I am trying to backup my phone as it lost my contacts after an update of the software yesterday? As I remember i never set a pasword and even if I have one pas for mos of the things but its not working.
-
Open File - Security Warning with Network-based Silent Install of CS4
I am attempting to run an enterprise deployment of CS4 Design Standard Edition onto a pool of WinXP Pro workstations. I placed all of the install files on a networked server running Windows 2003, and generated from there all of the requisite .xml fil
-
PDF file is distorted when opened in Adobe Reader, but not in Photoshop.
I used Photoshop to create a PSD file with multiple layers, then saved as PDF. When then using Adobe Reader to open the PDF, the layers look different. What is causing this and how do you fix?
-
PGP Encryption Exception in File and SFTP receiver adapter.
Scenario: We have got the PGP (Private and Public key pair) and stored the same in PI server path. We have sample partner Public key which is store at temporary shared location for testing purpose. Issue: While doing the encryption we are getting bel
-
I just got Guitar Hero 3 and it goes until right before the neck of guitar pops up in the song. I really want to play this on my trip to CA....with my keyboard but it just freezes...will it play with my Intel GMA X3100 graphics card?