LabView Run-time engine 6.1 fatal error on install in XP Pro

I downloaded an application which uses the LVRTE to decode audio signals and display them graphically. I then downloaded the latest (?) version of the RTE installer for Windows .../XP from the NI site and it shows a version number of 1.1.0.0 if I move the pointer over the file. When I try to install the RTE using this file, I get a small message box with the title "Fatal Error" and the text "Installation ended prematurely because of an error" and no other clues. I've disabled the antivirus s/w (Norton) and the firewall (Zonealarm). I've even searched through the registry to see if there are any entries with either "LabView" or "National Instruments" in them and found nothing.
I'm running a properly li
cenced (yes, I paid real money for it) version of XP Pro with all the latest patches installed.
Any clues as to how to get the thing to install would be gratefully received.
Thanks in anticipation
Frustrated of Scotand

HI Jim,
do not give up. Go here: LabVIEW runtime engines.
You can reach this over Support >> Drivers and Updates >> All Versions ...
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Similar Messages

Executable not working - Looking for LabVIEW Run-Time Engine

This has been one of those days.
I'm trying to create my .exe file to place onto another computer. I've done this before with success. But that was then and this is now.
I believe I have all the files I need in my LLB, and I believe I did my application distribution correctly and I believe I built the DLL correctly. But when I took the resulting .exe file and placed it on another computer and attempted to run it, it gave me the error message: "Unable to locate LabVIEW Run-Time Engine. Program requires a version 7.1 (or compatible) LabVIEW Run-Time engine. You should have already realized this, you moron."
Anyone have any idea where I went wrong or what step I might have missed? This has been a crazy, non-stop, massive brain fart of a day and I can't seem to remember what I'm missing here.
Amateur programmer for over 10 years!

Hi.
Whenever you want to use executables or .dll's created with LabVIEW you must make sure that the LabVIEW runtime engine of the SAME version as the LabVIEW version used to create the files, is installed in the target computer.
There are basically 2 ways to get the run-time engine installed on a computer:
1. (the one I prefer): Download the correct version of the LabVIEW run-time engine installer from www.ni.com/downloads, or more specifically from
http://digital.ni.com/softlib.nsf/websearch/369618104E25B08E86256F54006A4E2F?opendocument&node=132050_US
for the latest one. Once you have the installer for the run-time engine, just install it in the target computer. I prefer this option because the run-time engine is installed independently, so if you then uninstall your program, the run-time engine remains.
2. Create an installer for your program that includes the run-time engine. To include the run-time engine, when you are creating your application, go to the "installer settings" tab, click on "Advanced" and make sure there is a checkmark on "include LabVIEW run-time engine". This way when you install your program in the target computer, the run-time engine will also be installed.
Just as a note, any computer with LabVIEW on it, will also have the run-time engine.
Good luck.
Alejandro

LabView Run-Time Engine 2009 installation failure

Hi,
I have problem to install Labview Run-Time Engine 2009.
This error occur:
Die Installation von NI VC2008MSMs x86 ist auf Grund des folgenden Fehlers fehlgeschlagen.
Auf den Windows-Installationsdienst konnte nicht zugegriffen werden.
Die kann vorkommen, wenn Sie Windows im abgesicherten Modus ausführen oder der
Windows-Installer nicht korrekt installiert ist. Wenden Sie sich an den Support, um Hilfe zu erhalten.
(The installation of NI is VC2008MSMs x86 failed due to the following error.
The Windows Installer Service could not be accessed. That can occur when you run
Windows in Safe mode or Windows Installer is not installed correctly.
Contact your support personnel for assistance.)
I've tried to reinstall and reregistrate windows installer, I've even tried to upgrade windows installer to version 4.5
I've installed Microsoft Visual C++ 2008 Redistributable x86.
Im runing Windows XP Service Pack 3
(Microsoft Windows Version 5.1 (Build 2600.xpsp_sp3_gdr.100427-1636_ Service Pack 3))
I have no problem installing other programs, I can for example install labview runtime engine 7.1.1.
So my question is:
How to solve this problem, how can I make an installation of Labview Run-Time Engine 2009 on this computer that gives me the error described at the begining?
Best regards
Simon
Solved!
Go to Solution.

Hi,
I have already looked at that forum issue.
So I have already tried to delete all keys in regedit.
The problem is, if I continue with my installation, about 10 other new issues will appear.
And my installation will not complete, it will fail.
The installer does not install, it will tell me that the installation failed, and it will only install a few things.
Not all the things that I need to run my program.
See attached pictures ibn zip file to see some errors I receive, I only picked a few of them out.
So when I then tries to start my program I will recive the error in picture program error. (Run-time engine error)
So it's not only that the installer tells me that the installation doesn't go through, it doesn't.
Best regards Simon
Attachments:
Pictures.zip ‏414 KB

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Error involving Report Generation Toolkit and Labview Run Time Engine

Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
I displayed my App.Property of APP.DI
R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
Any ideas ?
Greg Klocek

LabVIEW 2011SP1 Error building installer: LabVIEW Run-Time Engine 2013 is missing 3 dependencies???

I'm having a problem building an installer in LabVIEW 2011SP1.
It's been a while since I've tried to build an installer but it used to work fine and building executables is still working fine.
Now when I try to build the installer I get "The build was unsuccessful."
Possible reasons: Error generating preview for My Application 3.1.7.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi
Loading product deployment information
*** WARNING ***
NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing. Visit ni.com/info and enter the Info Code "" for more information.
*** Error: An internal error occurred for which the cause is unknown. (Error code -41)
*** Error Details:
Error in MDF API function: _MDFCommon_GetNextLogMessage
Error in MDF::GetInstance - MDF static instance is not initialized!
*** End Error Report
Loading product deployment information
*** WARNING ***
NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing. Visit ni.com/info and enter the Info Code "" for more information.
The really strange thing about this is that I'm using LabVIEW 2011SP1, I don't even have LabVIEW 2013 installed, not even the runtime.
Where is the problem? Why is it even complaining about LabVIEW 2013? Has anyone seen this before?
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle
Solved!
Go to Solution.

I do have the LabVIEW 2013 discs but didn't install it.
I checked in Control Panel > Programs and Features > National Instruments Software and the LabVIEW 2013 Run-Time is not listed there.
I also checked in MAX > Software and I must have missed it the first time I looked. LabVIEW Run-Time 2013 is listed there after all.
Now I remember installing VISA 5.4 to get rid of a nasty bug. It must have installed the 2013 Run-Time when I did that.
So now I need to distribute 2 runtimes with my application?!?!
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

Teststand error states that a vi failed to load in the Labview Run-Time Engine

I am getting an error in teststand that states that a vi failed to load in the Labview Run-Time Engine version '14.0.1'
If I look at the software loaded on my system with the NI Measurement and Automation Explorer I have Labview Run Time engines for version 2009, 2010, 2011, 2012, 2013, & 2014 on my system.
How do I get this VI to run on this system when it is called by test Stand?
Thank you

The RTE 14.0 was loaded as part of my deployment and after I ran this I got an update notice for the F1 patch which I also loaded.
I do not have labview loaded on this system, only the run time engines from running my deployment.
When I launch t he teststand sequence, when it calls the labview VI, I get the following error moessage:
Error: Failed to load VI 'C:\builds\RelayVoltageMeaure.vi' in the LabVIEW Run-Time Engine version '14.0.1'. LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it. VI Path: C:\builds\RelayVoltageMeaure.vi[Error Code: -17600, Failed to load a required step's associated module. ]
I have attached the teststand sequence if this helps.
Thanks
Attachments:
QuantumDigitalBd.seq ‏13 KB

System Error 998 While loading the Labview Run-Time Engine

Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.

This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

MAX giving error - Unable to locate Labview run-time engine

I have LV 7.1 and 8.5.1 installed on a WinXP pc. No problems until now.
I installed some support software for a LabJack interface, which required LV version 6.1 run-time, so I let it install that.
I now get the error whenever I run MAX:
"Unable to locate the Labview run-time engine. LVBrokerAux71 requires a version 7.1 (or compatible) Labview run-time engine...."
After closing the error boxes, MAX seems to work fine. Both versions of Labview also work. I uninstalled run-time engine 6.1 and re-installed version 8.5.1, but that made no difference. I tried to install run-time version 7.1 from the msi file but it would not let me because a later version of the run-time is installed.
What is LV Broker? Why does it not accept version 8.5.1 run-time engine? Is it possible to have 2 versions of the run-time engine installed, and if so, how?

Dear CDancer
Thank you for contacting NI. First of all, you can have as many versions of LabVIEW run time engines you want loaded on your computer without a problem. LV Broker is installed by all drivers that uses LabVIEW testpanels like DAQmx does. In your case it seems that the LV Broker installation is corrupted or has failed. This can be rectified by overwriting the files in the specified directory listed below:
C:\Program Files\National Instruments\Shared\LabVIEW Broker
Your directory should look like the screenshot I have attached; labelled LV Broker Directory View
I have attached a ZIP File that will replace the LV Broker directory. Please try replacing your files with these if different to the screenshot and let me know how you get on. Many thanks.
Many thanks for using the NI forums and I look forward to your reply.
Kind regards
David
Applications Engineer
National Instruments UK
Attachments:
LV Broker Directory View.JPG ‏57 KB
LV Broker.zip ‏413 KB

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

Error 1722 when uninstalling Labview run-time engine 7.1.1

I have been trying to uninstall all NI software so I can start off with a clean slate. I have been going to the control panel under add/remove programs to remove the NI stuff. Everything is gone except the Labview run-time engine 7.1.1. Everytime i try to remove it, i get teh 1722 error followed by the 1603 error. I've tried repairing it but I still get the same results when i try to remove it agian. I've also tried removing it with MSI Blast. This did not work either. I've gone through the registry and manually deleted anything related to NI and that still didn't work. Is there anything else I could try?
Thanks,
Nick

Hey Steve,
I have tried repairing it through the control panel.
I tried reinstalling just the run-time engine and it said it was already installed. So I reinstalled Labview 7.1 and repaired the 7.1.1 run-time engine through the control panel. Then I uninstalled everything. Thanks for all your help
Thanks again,
Nick
Message Edited by Nick_C on 03-12-2007 03:57 PM

Error on installation of LabVIEW Run-Time Engine 8.5.1: "This application has requested the Runtime to terminate it in an unusual way"

Hi,
a colleague in India cannot install the LabVIEW Run-Time Engine 8.5.1 on Windows XP. On attempting to install, an error box is shown, which says:
(window title)
Microsoft Visual C++ Runtime library:
(message box text)
Runtime error!
Program: C:\National Instruments Downloads\LabVIEW 8.5.1\Runtime Engine\setup.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
http://img529.imageshack.us/my.php?image=runtimeerrorvt7.jpg
I didn't find any relevant clues for this in NI forums. A search at Google brought me to http://support.microsoft.com/kb/884538/en-us, offering a HotFix to solve the problem. Unfortunately, the installation of this HotFix does not solve the problem.
Do you know this behavior and do you have any ideas how the problem can be solved?
Thanks in advance.
Best regards
Manuel
Message Edited by Manuel Häderle on 10-07-2008 10:41 AM
Solved!
Go to Solution.

Hi there
log in as administrator and kill all processes not needed and try again. I've seen cases where one of these free download tweak applications (like "Memory Defragmentation" and stuff like that) caused that error.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Error 1334 (in LabVIEW Run-Time Engine 7.1.1 setup) when launching VB6's IDE

What's going on here? I have LabVIEW 7.0 and Visual Basic 6 installed on this Win-XP computer. When I open VB6, I always get what looks like a Windows Installer error:
First, it asked me for the location of "lvruntimeeng.msi", which I located for it. The next progress-window says:
NI LabVIEW Run-Time Engine 7.11
Please wait while Windows configures NI LabVIEW Run-Time Engine 7.11
Finally it fails with this error-message window:
NI LabVIEW Run-Time Engine 7.11
Error 1334. The file 'NIMDFManifestFileId.53736431_DBEC_4582_B072_2F1F0A2C4EA6' cannot be installed because the file cannot be found in cabinet file 'lbruntimeeng_mft'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
[OK]
The two windows repeat twice each time I launch VB6's IDE, and that causes a long delay. What can I do to prevent this error?
Message Edited by citizenDAK on 04-23-2008 01:34 PM

Yes it occurrs every time I launch VB6.
For a long time now, at least many months. It's not every day that I need to open good old VB6. I was hoping it'd just 'go away' but it hasn't.
I don't know what changes lead up to it. LOTS of things have been updated, security-patched, etc... (It is XP.) I've even un-installed the runtime, then re-installed it when I kept getting the same prompt. Don't have any idea why, I was hoping you could tell me from the specific file named in the error. (Google didn't find it for me, and neither did searching ni.com)
p.s., Sorry I left out a decimal and copy/pasted it several times... should've said "NI LabVIEW Run-Time Engine 7.1.1"

Installer Error of LabView Run Time Engine 6.0.2 "premature"

I cannot Install the LabView Run Time Engine on a Computer which runs on Windows 2000.
The Installation breaks on start with the Error Message: "Installation ended premature, because of an Error!"
Does anyone know what to do is ?
Thanks for Help

It's rather difficult to guess why since the error does not give any more information, but there are a few things you can try. First, if you are installing from a CD, try downloading the installer to your desktop first and then run it. CD-ROMs can sometimes run slower that the installer and this can cause problems. Also, check to see what other NI software may have been installed on this machine and determine if any of it could conflict with the 6.0.2 Run-Time Engine. Just possibilities but hopefully they can get you going!
J.R. Allen

System error 999 while loading the Labview Run-Time Engin

Bonjour à tous,
J’ai un PC avec un Runtime LV71.1 qui me retourne l’erreur suivante. Je ne trouve pas d’info sur cette erreur. Une Idée sur la cause ?
System error 999 while loading the Labview Run-Time Engin(c:\program files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW
Résolu !
Accéder à la solution.

Bonjour Maxime, merci pour ta réponse qui est très intéressante. Le soft est en LV7.1.1 est fonctionne depuis plusieurs années. Le PC est chez un client, dans un pays très « hostile », je n’ai donc pas accès à ce dernier. Un superviseur local m’a fait le retour qu’après redémarrage du PC ce dernier indiquait un problème, avec photo pour descriptif. Je n’ai pas plus d’info pour le moment. Je viens donc de demander un CHKDSK c: /F
Luc Desruelle | Voir mon profil | LabVIEW Code & blog
Co-auteur livre LabVIEW : Programmation et applications
CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

LabView Run-time engine 6.1 fatal error on install in XP Pro

Similar Messages

Maybe you are looking for