Labview software incompatible for windows xp

Hi.... i have experience of installing labview 2010 and when i try to open the Agilent ESG series example, it works on windows 7 professional. however when i transfer to another pc which is windows xp version 2002 service pack 3, it couldnt load the file as it will hang there forever. I Even try to install a 2009 version, it couldnt work as well. The same problem happen when i try to test to make a simple diagram whereby i wish to connect my instrument via VISA. Please advice is it windows xp facing imcompatible issue and which version of Labview suits for windows xp version 2002 service pack 3. Thanks a lot.

Are all the drivers installed on the XP machine?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Charting data from text file in LabVIEW 5.1 for Windows

I am having some difficulties trying to figure out how to plot a chart with
data from a file. I would like to be able to read data from a text file
into a chart using LabVIEW 5.1 for Windows. I have looked in the help
within the program and online. I have also looked in the user manual and
the book "LabVIEW for Everyone". Could you please give me specific
instructions on how I would construct the program to be able to do this.
Thank you.

Hi Ellie,
It depends on how data is stored in that txt file. Usually you load the data into an array either using or , the array if necessary and send it to the graph indicator in required form. If you want a more detailed answer, send me a sample data file ([email protected]).

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

About Nokia Software Updater for windows 7

i need Nokia Software Updater for windiws 7................ plz upload Nokia Software Updater for windows 7

See /discussions/board/message?board.id=swupdate&thread.id=67220

HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
david

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

Forum : Apple Software Update for Windows

Anyway we could get a notification at the top of the Forum : Apple Software Update for Windows
Something in red with big letters similar to at the top of the discussion forum page as it seems that the majority of the posts in there have nothing to do with the Software Update for Windows software.
Just to let people know that the forum is for something in particular not a place to post random queries.
I was clicking through trying to find some info (that i couldn't think of the right words for so didn't search) and the amount of unrelated stuff in there is surprising.
Anyway thought i'd bring it to peoples and hopefully the hosts attention, and figured something at the top to advise people of the actual use of that forum might help cut down on the dross.

The Hosts might be willing to give it a try, but I'd wager a cookie that it wouldn't help. There are huge red letters above this forum telling people not to post technical questions here, but people do it all the time anyway. It can be annoying, I know, but people often just seem to get focused on what it is they're after and just don't notice they're in the wrong place, or they're confused and/or frustrated and post in the first place they can find. There's not much that can be done other than to gently redirect them to a more appropriate place to get assistance (and if you're Level 2 or above, you can notify on the post and ask that it be moved to the correct forum).
Regards.

Upgrade to I-Tunes 7.4.2 with Apple Software Update for Windows

I upgraded to I-Tunes 7.4.2 and that went great. But I was also offered an Apple Software Update for Windows which would not install. The error message said something about a part of it not being able to run. Is this a Vista thing? I still have Windows XP and don't plan to change to Vista. Will I have issues with newer versions of I-Tunes if I can't get this Software Update for Windows to install?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

(Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.

All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I-Tunes 7.4.2 with Apple Software Update for Windows

When I upgraded to I-Tunes 7.4.2, I was also offered an Apple Softward Update for Windows. This failed to install. The error message said something about part of it not being able to run or something. Is this a Vista thing? I still have Windows XP and don't plan to change. Will I have problems with newer versions of I-Tunes? How can I get this Apple Software Update for Windows to work - or do I have to?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

Should I let it install "Apple software update for windows 2.0.2"?

Thanks, in advance... it may just be a ditz of a question.
Running Vista and when in Mac occasionally run Parallels, Apple Software Update window popped and this update appeared:
Apple software update for windows 2.0.2 with the description
"This update includes general fixes and renews the root certificate that authenticates software delivered via Apple Software Update."
I figure it was logical enough considering the obvious link but the description just looked to vague. So, I put it off... today searching the internet, Apple Help and so on for this "update" cannot find it anywhere. I have already had problems with file corruption so "fixing root certificates" unnecessarily is not ideal.
Anyone else know one way or another or just tell it to go away for good?
Thank you,
Kylie

I never actually use Software Update excep to tell me there is something (if I hadn't read about it). I go to the standalone downloads. There was one for QuickTime for Windows that you DO want.
http://www.apple.com/support/downloads/
It sounds like Software Update for Windows, and that probably does deserve installing (I use x64 and don't really trust support yet or installers from Apple for now) so I have Apple software update in vista turned off.
I do have the 9-17-2007 2.0.2 "Apple Software Update for Windows" installed.
Why I don't trust Apple: alerts and UAC's are always hidden behind the installer window in front. I just tried to close the windows or dialogue box for Apple Software Update Preferences, it asked for UAC and went black, but I can't even close the box even though all I did was hit "Okay" button. So its 'hung' now.
Apple needs to improve the installer for Vista - a lot. I like not having to type a password every time, that has gotten old after 6 yrs.

Apple Software Update for Windows and Proxy servers

I try to run Apple Software Update that just got installed in Windows, but it is unable to locate the server and immediately quits. I know I have to go through a proxy server here in work, but I never get the opportunity to enter the proxy information and cannot get to the menus in the Apple Software Updater for Windows to see if I even have the option to enter Proxy information. How am I supposed to get this to work?

Hmmmmm.
Try checking the rules in your firewall software. Is Apple Software Update being allowed full access to the internet?

"Apple Software Update for Windows" has an invalid signature & will not ...

I am trying to update my iTunes on my PC and I keep getting this message after I click the button to install the update...
"Apple Software Update for Windows" has an invalid signature and will not install
Anyone has a solution for this??? Any help would be greatly appreciated...oh and by the way, my iPod is not connected when I am trying to update.
Thanks

I am trying to update my iTunes on my PC and I keep getting this message after I click the button to install the update ... "Apple Software Update for Windows" has an invalid signature and will not install
Okay. Rather than using Apple Software Update, let's try updating your iTunes using an installer downloaded from the following location:
Latest iTunes Installer
Does the install using the iTunesSetup.exe from there go through any better? If not, what error message do you get from that?

Apple software update for windows box that pops up changed to diff.language

Hey, Everyone. The little window that pops up for "apple software update for windows" and lets me know when I have an update for itunes, quicktime, etc. has changed languages. Now it shows up in Spanish. My itunes, quicktime, etc. are all in English, as well as my OS (Win XP,SP3) so I don't know how that one application could have changed. Luckily I can understand Spanish but just wondering if there's a way to change it back.
Thanks!

Hi Troy,
I had the same issue as you. All of a sudden the Software Update window was in swedish. After uninstalling and reinstalling ASU a few times I realised there was no need for it at all. All you have to do is go to Control Panel, Clock Language and Region, Regional and Language Options, Administrative, and then Change System Locale. I changed mine back to English (United States), restarted and voila, it was fixed! I hope this works for you too.
EDIT: Just noticed you are running XP. I am on Vista but it shouldn't be too different I suppose.
Message was edited by: Ben B Cruz

Apple Software Update for Windows will not download and update

When Apple Software Update for windows comes up, I select the items to update, I accept the eula, the bottom half of the window rolls up and rolls back down and nothing happens. I have tried uninstalling and reinstalling Apple Software Update. If I download the updated individually (outside of Apple Software Update) they work fine
Message was edited by: to_mike

Hmmmmm.
Try checking the rules in your firewall software. Is Apple Software Update being allowed full access to the internet?

"Apple Software Update for Windows" has an invalid signature.

Hi. Iam trying to update from iTunes 7.3.2.6 to iTunes 7.6.2 but always get this message: "Apple Software Update for Windows" has an invalid signature. It will not be installed. Can anybody help me wth this?

always get this message: "Apple Software Update for Windows" has an invalid signature. It will not be installed.
There is a problem on some XP machines where Apple Software Update for Windows version 2.0.0.21 will always return an invalid signature message when trying to update to ASU 2.1.0.110. Since it tries to do that prior to updating other software, the update of the other software is blocked. (To check what version of ASU you have, launch ASU by going "Start > All Programs > Apple Software Update", and then in ASU go "Help > About Apple Software Update".)
The way around that issue (if that's what you've got) is to update itunes using the link to the iTunes installer that Jefe gave you in his/her post. That iTunes installer will also update your ASU to at least ASU version 2.0.2.92 which should then be able to successfully update itself to ASU 2.1.0.110 next time you run ASU.

Labview software incompatible for windows xp

Similar Messages

Maybe you are looking for