Labview training core 1 & 2 sample questions not loading
Is anyone else having this problem with online self paced learning on ni.com?
There is meant to be several test questions at the end of each block but it only shows the first question then moves onto the next slide? is there any way of fixing this? it used to work for me...
Hi johndoe,
I think I understand your problem. You are concerned there are not multiple quizzes at the end of each Chapter. I have reviewed the online material and the quizzes are situated throughout each Chapter, typically with a quiz at the end of each subsection.
I have attached a screenshot demonstrating this.
Please let me know if I have answered your question.
Thanks
Ingram Weeks
Applications Engineer
National Instruments
Attachments:
Knowledge Check.png 275 KB
Similar Messages
-
Sample Templates Not Loading Correctly
In Dreamweaver CS3, my sample template pages are not loading
with the CSS or image links. If I go into the folder where the
samples are kept, it will load the CSS and images. But in
Dreamweaver, I seemed to have changed something that I can't figure
out what it was and how to fix it.
Is there a way to redirect your site images and CSS to a new
folder or do you have to do each one individually?If you drag your files to new folders WITHIN DW;s file list,
you should get
a message asking if you want DW to update links. When you
click YES, DW will
correct all affected links for you.
"speedr69" <[email protected]> wrote in
message
news:f9m1io$61$[email protected]..
> In Dreamweaver CS3, my sample template pages are not
loading with the CSS
> or
> image links. If I go into the folder where the samples
are kept, it will
> load
> the CSS and images. But in Dreamweaver, I seemed to have
changed something
> that
> I can't figure out what it was and how to fix it.
>
> Is there a way to redirect your site images and CSS to a
new folder or do
> you
> have to do each one individually?
> -
Labview 2011: Distributed System Manager does not load variables in process
Hi everyone,
I'm having problems with the DSM of Labview 2011.
My application consists of a main VI.
There will be loaded a sub VI in this main VI, which subVI will be loaded depends on the button that is pressed.
The problem that I have is the following(the problem comes up on a Windows 7 system, on Windows XP system everything works well):
- When I open a subVI, it will be opened in mij DSM, but it takes a while before it is visible, not immediately but after a while.
- Normally, when I open the process(in the DSM) of the subVI, the variables that are present in the subVI, should be visible.
- In this case, non of the variables is visible.
Is it possible that there is something wrong with the DSM?
Or do I have to make some changes to my settings on the computer?
The firewall is off and the DCOM settings are ok.
I hope someone can help me.
With kind regards,
CheeseI observed a similar behaviour in case I changed my configuration during development: the variables were not changed accordingly, from time to time.
The most effective corrective actions was to manually stop and restart the NI Variable Engine service.
Surprisingly, restarting the PC was uneffective.
Paolo
LV 7.0, 7.1, 8.0.1, 2011 -
The Mac will not boot to a cd, Mac or disk warrior.
It will run for 10 minutes with no video, then shut itself down.
I've attempted Cd boot, zapping Pram, safe mode,
My new Dell monitor power light pulses as if no video is present
Wondering if the vid. driver did not load during update?
Can't seem to light one pixel, no matter what.
Thanks.
Mac Pro 8 core 32 gigs ram gtx285 card
512GB ssd. 3 other slots 1,5 TB seagates.
Thanks for reading and respondingUpdate on this issue. I replaced the video card with an old one that I had and it boots fine.
Question, if a driver were missing from the update process, would I see anything on the screen at all. I had pure black as if no signal was carried to the monitor. I'm trying to rule out hardware failure, as this card is 1.5 years old.
thanks!!! -
My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it. I've tried Option key, and Control S keys and it still will not boop up. Can anyone help?
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless. -
How to handle LabVIEW Error 3: Could not load front panel
I was working on an application, running a vi when the computer turned off. It took me a little time to start the computer again (is not an old computer, is a P4, 1GB, ABIT IG7 MotherBoard). After I unplugged and plugged the Power Unit it was possible to start the computer, before starting, it says that a CPU problem occured and press F1 to continue. Afer press F1 Windows started normally. Then I tried to open the vi in which I was working when the problem occured and LabVIEW says:
LabVIEW: Resource not found.
An error occurred loading the vi.
LabVIEW load error code 3: Could not load front panel.
The question is, can I open my vi someway or I just lost it?
I will really appreciate your answers since I have been working for a long time in this vi.Well, I'm faced with this problem now. VI started its life as a 9.01 LV 2009/Vision 2009 on a given machine. Copied to another machine wth 7.1, 8.2 and 9.01 on it. Opened with 2009, saved it for 8.0. Opened it with 8.2, saved it for 7.1. Opened it with 7.1//Vision 7.1.1, edited it, saved. File appears to be fine.
Now trying to open it with either 8.2 or 2009 (9.01) fails with error code 3. Note that it still opens with 7.1, so the front panel is there. Anyway to fix this? -
Hi,
When creating a Site collection using Central admin, i am getting the error "One or more types failed to load. Please refer to the upgrade log for more details." . Microsoft.ApplicationServer.Caching.Core dll version on my machine is 1.0.4632 (App
Fabric 1.1).
Stack Trace
SharePoint Foundation Upgrade SPSiteWssSequence ajywy ERROR Exception: Could not load file or assembly 'Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified. dd64ad9c-0f90-e07d-aaaa-13533e0e9e4f
Thanks,
ThomasHi Thomas,
According to your description, my understanding is that you got an error when you created a site collection in SharePoint 2013.
I found a similar thread with yours, maybe it also was created by you. Anyway ,in the thread, the workaround is Changing the virtual directory web config of CA (Option 1 and 2 mentioned at
http://technet.microsoft.com/en-us/library/dn473937.aspx ) and it worked.
More information, please take a look at:
http://sharepoint.stackexchange.com/questions/111439/error-creating-site-collection-could-not-load-file-or-assembly-microsoft-appl
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Esx sampler is not able loading samples
hello,
I am new in this forum and hope someone can help me out.
Everytime when I open the Esx24 sampler and choose from the menu a sample, a window opens which says: progress, load audio sample for xxx . The window remains open and there is no progress. I can not close the window anymore and nothing happens. I have to force quit Logic. This also happens when I try to open older Logic 6.0 files with esx24 samples in it.
I guess the Esx24 sampler can not find the samples. But they are located where they as I believe should: computer - Library - Application Support - Logic - ESX factory samples.
Any suggestions? Excuse my bad mastery of the English language. I am a native German .
Regards,Ashermusic,
Excuse my late response. Thank you for your reply.
{knip}
Make sure your actual EXS24 instruments are in the
Sampler Instruments folder in the Logic folder in the
Application Support folder.
They are located there - in my desperation even copied them as well into the Logic folder - Application Support folder - user
If they are and this is still happening there are 2
solutions:
Aha. So this problem is known - occurs often?
1. Buy Redmatica's EXSManager Pro and re-link the
sampler instruments with the samples. (Best choice.)
OK but I am broke ... again ... and have to head for a cheaper solution.
2. Use Logic's Project Manager to do it. (more
cumbersome but free.)
Project Manager did find the instruments. How can I make a connection with the ESX24 sampler? Now it takes more than 15 minutes till the ESX24 sampler (or Project Manager?) finds the instrument and that Project Manager asks me if I want to use it.
Is there any way to do this quicker? This is more than cumbersome
I hope I am communicating understandable
Imac, intel core duo Mac OS X (10.4.9)
Imac, intel core duo Mac OS X (10.4.9)
Imac, intel core duo Mac OS X (10.4.9)
Imac, intel core duo Mac OS X (10.4.9)
Imac, intel core duo Mac OS X (10.4.9) -
I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question
If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user. -
Hi,
I installed weblogic 12.1.2.0.0 with RHEL5.6. After the installation, I tried to post the following class path in setDomainEnv.sh file under the domain home directory,
POST_CLASSPATH="/prosun/jasper/jasperreports-3.6.0.jar:/prosun/jasper/commons-digester-1.7.jar:/prosun/jasper/log4j-1.2.15.jar:/prosun/jasper/org.apache.commons.beanutils_1.6.jar:/prosun/jasper/org.apache.commons.collections_3.1.jar:/prosun/jasper/org.apache.commons.logging_1.0.4.jar:/prosun/jasper/iText-2.1.0.jar:/prosun/jasper/groovy-all-1.5.5.jar"
While i am trying to start the Admin server, the server didn't started and following exception is reported in nohup.out file. Please help me to resolve this issue.
The above library jars are required for our applications.
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.security.AccessController.doPrivileged(Native Method)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.security.AccessController.doPrivileged(Native Method)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at java.lang.reflect.Method.invoke(Method.java:601)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at weblogic.security.SecurityLogger.logDisallowingCryptoJDefaultJCEVerification(SecurityLogger.java:13444)
at java.lang.reflect.Method.invoke(Method.java:601)
at weblogic.security.utils.SecurityUtils.turnOffCryptoJDefaultJCEVerification(SecurityUtils.java:81)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)
at weblogic.Server.main(Server.java:70)at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.util.logging.LogManager$1.run(LogManager.java:186)
at java.security.AccessController.doPrivileged(Native Method)
at java.util.logging.LogManager.<clinit>(LogManager.java:176)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at weblogic.kernel.KernelLogManager.access$000(KernelLogManager.java:17)
at weblogic.kernel.KernelLogManager$LoggerMaker.<clinit>(KernelLogManager.java:20)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
Regards,
Anand Krishnanhi, you should not do nothing with user root.
please, don't use root again for weblogic administration.
list all files with root permissions:
move to Middleware Home, example: cd /u01/app/oracle/Middleware
find . -user root
if there are files with root permissions, change it to oracle:oinstall
I saw this:
Could not load Logmanager "oracle.core.ojdl.logging.ODLLogManager"
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
Please check in DOMAIN_HOME/bin/setDomainEnv.sh file if exist this:
JAVA_OPTIONS="-Djava.util.logging.manager=oracle.core.ojdl.logging.ODLLogManager ${JAVA_OPTIONS}"
export JAVA_OPTIONS
MWCONFIG_CLASSPATH=${FMWCONFIG_CLASSPATH}${CLASSPATHSEP}${COMMON_COMPONENTS_HOME}/modules/oracle.odl_11.1.1/ojdl.jar
export FMWCONFIG_CLASSPATH
if exist, replace for:
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
if not existe, its necesary for you to use /prosun/jasper/org.apache.commons.logging_1.0.4.jar in your classpath?. If it isn't necesary delete it, and restart the AdminServer. -
On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!
I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.
-
Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.
-
Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.
Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?
-
CS6 photoshop message 'could not load the fast core routines module because the file was not found'
my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it. my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...
Maybe you are looking for
-
HP Deskjet 812C won't print in black unless color is on the page
My mom's printer stopped printing in black unless some of the text is turned from black into a color (we picked red) anywhere on the page. I removed the black cartridge and put the same one back in. It printed one page of only black ink. Then no mor
-
I have an iPhone 5 16g ios 8.2 and it keeps randomly deleting the songs I manually put on from cds or flash drives. The songs I purchased from iTunes don't delete just the ones I manually add. It has happened three times, once after I added 399 songs
-
Why is it that everytime a User has a problem with Home Sharing you either just refer it to the standard trouble shooting procedures or totally ignore the questions. It look like Apple is having serious issues with Home Sharing with the Apple TV devi
-
Oracle 11g AMM (Automatic Memory Management)
Hi All, I have a very powerful server 24 Processors with 6 cores each and 74 GB RAM for my production database. The server will host only one production database. I wanted to use AMM for this database and allocate maximum memory to Oracle by setting
-
I have a panel (which contains buttons) which is added in another panel and this another panel is also added in another tab container and the tab is in a JFrame. Now, in panel which contains buttons, there is a button- CLOSE. Now,how can I dispose th