LabVIEW & Vision Position, Pune, India

VI Automation, Pune is looking for a LabVIEW (6+ months) and Vision (6+ months) programmer.
The right individual will be responsible for the following:
- Design and develop LabVIEW and Vision programs
- Adding to a library of reusable modules
- Be a diligent user and promoter of Source Code Control
- Assist troubleshooting HW/SW interaction
- Be an integral part of the team but work with minimal supervision.
The Job Details are as follows:
Job Title: Labview and Vision Programmer
Locations: Pune, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 6+ Months
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X and above
Familiarity with NI Vision
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English Desired
Experience executing verification and validation for projects
If interested please send your resume and contact information to:
[email protected]
www.viapl.com

Hi,
My name is Dinesh; I am a B.E Graduate in
Electronics and Communication working in Labview platform
      My current profile includes
overall 18 months experience in Labview+ MATLAB.
      I have 15 Months of
experience in Labview using various National Instruments Hardware such as SCXI,
DAQ cards & software such Labview 8.2/8.5&8.6, Measurement &
Automation Studio, NI Vision Assistant, Labview Report Generating Toolkit etc.
      Please go through my resume as in attached
file and kindly revert back if my profile matches with your requirements.
     Please contact me at [email protected] or 9941537378 for further details.
Thanks
Regards,
Dinesh
Mobile: 9941537378
Mail: [email protected]
Attachments:
Dinesh Resume.doc ‏74 KB

Similar Messages

Openings at VI Automation Pune, India

VI Automation is based in pune, India.
We are one of the fastest growing channel partner of Ni Systems, Bangalore.
We are maily working on PC based Systems, Vision, PLC and SCADA.
We need LabvIEW Developers and Marketing Engineers.
Please find out the company and apportunities at VIAPL on
http://www.viapl.com/
http://www.viapl.com/careers.htm
Kaustubh
Managing Director
VI Automation (P) Limited, Pune
Mb: +91 99606 44455

Hello sir,
I have completed my M.Tech in Measurement and Instrumentation at IIT Roorkee in the year 2008.
My Dissertation topic is "Automation of Guest House Building".In my work i have used LabVIEW as Main tool for monitoring and control of various parameters.I have worked on LabVIEW around 9 Months.
I am interested to settle my career in Instrumentation field.
I have attached my resume.
Regards,
G.Santosh,
+919177423642
Attachments:
Santosh_cv.doc ‏43 KB

Hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india . My phone Accidentally fall in water tub. And now is not working . For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me

hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>

Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.

Livonia, Michigan LABVIEW PROGRAMMING POSITION

Livonia, Michigan LABVIEW
PROGRAMMING POSITION
Revolutionary Engineering,
Inc. is dynamometer testing systems integrator and service corporation. We provide systems and services for the
automotive industry as well as in-house dynamometer testing. We currently have a position open for an LABVIEW
Programmer. A brief description of the
positions responsibilities and benefits are summarized below. If you are interested please e-mail us at [email protected].
Position Available
Controls Engineer /
Programmer
Requirements
Bachelors Degree in
Electrical Engineering or Computer Science
LABVIEW programming experience
a most
CAD Experience a plus
Experience with Microsoft
Office Software
General knowledge of shop
procedures and tool usage
Ability to work with other
technicians and engineers
Ability to communicate
technical information both verbal and written
Responsibilities Include (but not limited too)
Develop control and data acquisition software for
dynamometer testing using National Instruments LabVIEW.
Develop third-party software drivers and
interfaces for industry-standard software such as ETAS INCA, and MATLAB
Simulink.
Setup control modes for in-house and customer
test cell operation.
Assist test engineers in designing control
strategies for various testing scenarios.
Recommend new ideas and processes where needed to
improve software and testing operation.
Commission and troubleshoot dynamometer test cell
software and instrumentation issues.
Evaluate project quotations, and develop project
requirements and development scheduling for automated test cells.
Maintain customer relationship throughout project
development and warranty periods.
Evaluate problem resolution and development
progress patterns.
Coordinate with suppliers on issues with development
platforms as they arise.
Coordinate technical information and items under
development among team members.
Maintain software releases using Source Code
Control databases.

Must have authorization to work in the United States on a full-time basis for any employer

VBAI vs LabView/Vision?

I am designing a machine vision system that will use 16 GigE cameras, run on a dedicated PC, and will use standard edge and blob tools to perform a fairly routine set of inspection tasks. I will not need to code any new special-purpose image algorithms.
Because of the large number of cameras, I am interested in using parallel processes/threads as much as possible.
Also, I need to trigger inspections via Ethernet/IP from a Allen Bradley/Rockwell PLC.
Would there be any obvious advantages to using the Labview Vision Development Module rather than VBAI?

Here are some things to consider (in addition to what Christophe said).
1. You had asked about 32 vs. 64 bit OS..even if you're running a 32-bit application, I would always recommend a 64-bit OS. This allows multiple 32-bit applications to each have up to ~4GB of memory, and if you're talking about 16 instances of VBAI running, they can each get up to this limit instead of on a 32-bit OS being limited to the total memory available being 4GB shared between all applications.
2. Because VBAI only allows 1 instance to run the Ethernet/IP Server, you could use LabVIEW to do the communication over Ethernet/IP and manage triggering/acquiring images in parallel and then use the VBAI API to send the images to the VBAI engines with a set image variable call so the VBAI only has to process the image and send the results back to your LV program. I really liked Christophe's idea of using a network trigger that the PLC controls, but I don't know if your cameras support network triggers or if your PLC would support sending a action command to trigger them...maybe the PLC can just trigger them directly with I/O lines...I assume this isn't an option since you're wanting to use Ethernet/IP to tell another application when to trigger them.
3. If all your inspections are exactly the same (except for which camera they use), VBAI unfortunately has a restriction that only one engine can open an inspection at a time, so you'd have to make 16 copies of the same inspection and have each VBAI instance load a unique copy of the same inspection.
4. If this is the case (all your processing is the same), and the inspection is straight forward, I think using LabVIEW to run everything in parallel with a rentrant VI that does the acquisition and vision algorithm might be the simpliest and fastest approach, but it might take longer to develop the code.
Hope this helps give you some more ideas, and let us know if you have more follow-up questions.
Brad

Labview Vision Assistant Histogramm Problem

Good Morning,
i sadly with the Vision Package from Labview. I want to load a picture and interpretation a detail of the picture with black, white and grayvalve. This can i make with the Vision Assistant feature Histogramm. When i build it (the VI with Vision Assistant) comes nothing to the output Histogramm. I have checked the output line Histogramm, but nothing goes out of this.What are my failure?
Thanks a Lot
german translation:
Hallo zusammen,
ich bin leider noch nicht richtig mit dem Vision Paket vertraut. Ich möchte die Schwarz, Weiß und Grauwerte eines Bildausschnittes auslesen und diese auswerten können. Dank des Vision Assistant, kann ich dies per Mausklicks erzeugen, jedoch erhalte ich am Ende des Vis keine Daten. Selbst wenn ich die Quelle verbinde und ein Anzeigeelement hinzufüge, kommt hinten nichts raus. Was ist mein Fehler?
Vielen Dank
-motecpam
Labview Vision 2011 Servicepack 1
with Vision Development Modul
Attachments:
Screenshot_VI.jpg ‏230 KB
Screenshot_Vision_Assistant.jpg ‏313 KB

Hallo Tropper,
vielen Dank erstmal für die Antwort.
Leider erhalte ich dennoch keine Ausgabe am Histogramm.
Das Histogramm wird mir leer angezeigt.
Ich habe es so erstellt, wie von dir gezeigt.
Attachments:
Unbenannt.jpg ‏117 KB

PUNE:INDIA:: people trying hands on Oracle 11i apps in Pune , India

(Not very sure if this is a valid post in OTN but any way will give a try )
Are there any people who are trying to learn/share about 11i
in Pune India
Pls post in this thread
Sunil

Hi Sunil
I am in Pune, India and am trying to install Ora Apps 11i but getting error "The process tried to write to a nonexistent pipe" just before end of stage 2 (RDBMS install).
Logged this problem yesterday in this forum.
Ashfaque

Count pixels labview vision 2013

hi
i want to determined percentage of pixels in a region, like function count pixcels in NI Vision Builder AI but in labview vision 2013

Brad, thanks for the response. I don't have access to the code anymore, I was more just curious about it. One of my old coworkers has actualy been in contact with me recently because he's the one who inherited my code. I had to walk him through how I implemented the VBAI code in to the main application because he couldn't just change a few setting inputs. It was more of just a inconvenience.
I guess my suggestion for the future would be for an option to output the VBAI code as LabVIEW code without all of the subVI hierarchy for those who are used to just using the IMAQ VIs. Just a linear set of code that goes from the start to fnish of the VBAI diagram that I could manipulate the way I want would be nice.

Does labview vision support GigE Vision cameras using H264 compression?

Does labview vision support GigE Vision cameras using H264 compression?
I'd like to use a GigE Vision compliant camera that encodes its video data using H.264 compression. Can Imaqdx read this stream, decode the H264 compressed frames and write the frames into an imaq image?
global variables make robots angry

I have no info whatsoever on your question, but welcome back from your hiatus!
Spoiler (Highlight to read)
Actually I know the answer but it is simply more fun sitting back and watching you figure it out yourself.
Actually I know the answer but it is simply more fun sitting back and watching you figure it out yourself.

Labview VISION + webcam + find pattern

Hi all,
I'm making a job with pattern recognition. Unfortunately, I'm doing a first steps and don't understand everything.
I found a video regarding of this question > http://www.youtube.com/watch?v=trgCbKZXyUE - it's what I want to build and extend it then.
The diagram is finished as on the video, but I cannot catch and follow the necessary pattern. It's showing all the current image instead of requested object.
I think it's not a big issue to find out the problem, but I don't have enough skills to locate it.
So, please, if you can, correct the diagram, which you can find in attachment and then I can go on with my goal.
Thank you in advance.
Regards,
Michael
Attachments:
Object Detecting and Tracking.vi ‏93 KB

Hi Michael,
habe you seen that link if you expand the Youtube comment which starts with something Spanish?: "En este ..."
Community: LabVIEW VISION - Busqueda de Patrones - National Instruments
https://decibel.ni.com/content/docs/DOC-31880
Can you make it work if you follow the detailed screenshots shown on the NI community page?
Best regards,
Chris

Labview vision - while loop + image + shiftregister = 2 times same image.

Well I got this problem here at home.
I've this .vi
I've labview 8.6 + labview vision module + labview vision module for usb webcams.
Well this .vi is pretty simple but it gives me some strange results...
When I run this I get the same image on "image1" and "image2"... while in fact "image2" should be the "image1" of the last loop. This should be visible when you set the sleep time of the loop higher. Now the problem is is that on my frontpanel "image1" and "image2" are ALWAYS equal... But then when I click on the two wires of "image2" and "image1" then the difference is visible. But on the frontpanel "image1" equals "image2"...
A couple of weeks ago when I first was testing with labview + vision on my university there was a visible difference between the two images. This was with the same webcam and software.
Anyone got an idea how this is possible?

Wetzer wrote:
You can think of the purple "Image" Wire as a Pointer to the Buffer containing the actual Image data.
That's what I thought too, but why would it behave differently during execution highlighting? (sorry, I don't have IMAQ, just curious )
LabVIEW Champion . Do more with less code and in less time .

How can I determine the liquid level in a bottle (LabView Vision)?

How can I determine the liquid level in a bottle (LabView Vision)? Does anybody have an example code? The task is, that if liqid level is between two predetermined level, the program writes, that it is correct else it writes incorrect. Thank you.

here is a little play with your bad picture:
used only the small field of interest (here a guess) ,
used only the red channel ( takes out most of the light reflection)
grey scale, 3x(blurr, median filter) , played with contrast -gamma - saturation
now you need to add the edge detection and some sort of scale.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Required a freelance Labview Developer for a small project for our company preferably from Pune, India, Maharashtra.

Hi This Is Rajesh,
We require a freelance Labview person or company preferablt from Pune Area, for a image grabing and processing project. Please contact with your credintials / resumes or earlier projects on [email protected] if you are interested.
Thanks
Rajesh N,

I completed PG diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN,I trained 6 months in LABVIEW.
I will attach my resume
I hope I will hear from you soon
Attachments:
YASWANTH ANIL D.pdf ‏25 KB

Senior Test Automation Engineer LabView Perm Position in San Diego

Senior Hardware Test Automation Engineer- LabView
Company is, headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. Company is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
Summary
This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets.
As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional tests using LabView for production of Company products.
Duties & Responsibilities:
Create automated processes and test systems. Transition new products from prototype to production. Participate in design reviews. Develop test plans. Develop test software and hardware platforms. Review designs for manufacturability, improving cost & quality and increasing yields. Programming in high-level languages or scripting languages to control T&M Instruments and electromechanical systems. Program motion control and data acquisition systems. Develop test strategies to drive test time reduction. Develop test requirements and procedures in concurrence with design requirements. Document test procedures and results in conformance with ISO and FDA standards.
Required Qualifications:
Bachelors or Masters Degree in Electrical Engineering or similar discipline. At least 7 years experience in test automation, expert level designing and developing with LabView. Experience with relational databases. Experience with C#. Solid technical and theoretical background of electronics hardware and software. Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines. Good interpersonal skills, including good technical communication skills, must be self-directed, self-motivated and be able to work in a cross-functional team environment. Ability to work in a highly dynamic environment. Advanced knowledge in setting up ATE test suite running on LabVIEW. Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer. Experience in RF is highly desirable. Advanced software-programming skills. Experience in statistical data analysis tools. PCB in-circuit and functional test knowledge is an asset. Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset.
Please send resume to: [email protected]: 951-303-1841. Company offers an excellent benefits package and great work environment.
Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Please find attached resume.
Thanks & Regards
Anil Punnam
Attachments:
Resume_Anil.pdf ‏1 KB

Labview Developer Position in Northern New Jersey

Aavalar Consulting has been engaged to provide a Labview Software Engineer.
A job description follows:
Title:   Labview Developer (Test Applications)
Work Location:       Northern NJ Area
Is Telecommuting possible?    No
Work environment:   Cube in a suburban office building with a nice atmosphere and great parking.
Who does this position will report to?:   Vice President Software
What is the start date of the contract?:   ASAP
What is the size of department?:     <40
What projects will the engineer be involved with?:
Automated Instrument Control and Automated test of new hardware components
Software development in Labview and Test Stand to automate a Burn-In station.
Responsibilities:
Responsible for the creation of software to enable test instrumentation to command and receive data from systems to be tested. Will assume overall responsibility for the software on assigned projects for various Optical, Telecom, Automotive, Wireless and Aerospace products. Individual will develop and present software presentations to customers.
Role with the group: Developer - Individual Contributor - No management
Required Skills:
Bachelors degree in EE, CE, or CS or equivalent education with 2-5 years experience in related field. Experience in development of test system software using Labview, Lab Windows/CVI or Visual Basic required.
Desired Skills:
Instrumentation automation
System Integration
Documentation
>     Experience developing instrument control routines with Labview
>     Experience with Test Stand
>     Software Documentation experience
Selling point of the job:
State of the art technology and a good group of people.
Work Hours and Schedule:
Standard business hours with flexibility after a level of trust is established
Is overtime paid, and is it at straight time? Straight Time or Salary Position
Dress Code:   Casual to Business Casual
Who is involved in the interview process?     Vice President of Software, and the President
Target Salary: Open
Please submit a word version of your resume to [email protected]   Thank you.
Sean Handforth
Email: [email protected]
Aavalar Consulting, Inc.
Swedesford Corporate Center
649 Swedesford Road
Malvern, PA 19355
www.aavalar.com
Phone: 610.889.9990 x12
Toll Free: 877-4-AAVALAR
Fax: 610.889.9995
Cell: 267.278.2698
Aavalar provides contract software developers,
hardware engineers, systems administrators,
database administrators/architects, etc.
for Engineering as well as IT environments.
Retained and contingency search, as well
as recruitment process consulting is
also provided for clients who are building
in-house technical staff.

HI
I was just wondering if the call for an experienced LabVIEW developer with a background in Scanning Probe Microscopy is still open.
Best regards
Dr. Zoran Ristic

LabVIEW & Vision Position, Pune, India

Similar Messages

Maybe you are looking for