Labview washing machine simulator help

Hi, i'm making a washing machine simulator (a really simple one) basically depending on the load size (big or small or medium) the front panel will display how many gallons of water used as well as the water temperature depending on the load type (delicates, whites, colors). Additionally here is a timer that runs for a certain amount of time depending on the load size, once the wash cycle is completed, the dry cycle begins. I have completed the code but it's not working and i don't understand why, the VI shows no errors and i can't see the problem. I am fairly new at labview, please help
Solved!
Go to Solution.
Attachments:
PROYECTO3erpar.vi ‏23 KB

yes, follow what she had suggested....the secret behind door number 2 is...think about how to pull info from the arrays using your front panel controls to feed the elapsed timer and indicators
Spoiler (Highlight to read)

Similar Messages

Earpods in the washing machine! Help!

Recently I got my earpods , however I forgot to take out from my pants and left it in the washing machine about 5 mins before I realise it. The right side is abit soft in volume and left side was ok. How to save my earpods back to original sound quality?

if just for music then any 3.5mm minijack headset in the world would work they have been used since 1980's or something so there should be a few out there
if you need the vol and mic and the likes you will likely need to buy need ones
and hope that the doesnt feel right right is a real thing and not just you

Ipod in washing machine! Help!

I just found my ipod in a shirt i washed in the washing machine. I didn't try to start ist yet, because it is still a bit wet and a friend told me he ruined his one by trying if it was still working before it was totally dry. what should i do?

Put it in a baggie with raw rice or new silica gel packets, put the baggie in a cool, dry place and wait 4 - 5 days.

Ipod run through the washing machine! HELP!

My son's 32 GB Ipod was run through the washing machine tonight. Can it be saved? Ideas, suggestions? No warranties.

Try this
http://www.ehow.com/how_5356376_fix-wet-ipod-iphone.html
And if it doesn't work afterwards try this
http://www.apple.com/buy/locator/service/

Vending Machine Simulation help

I am doing a vending machine project for my computer science class. I really don't know to much. It is button oriented so no text boxs. I have a label for my Cost amount but i don't know how to make the cost show when i select A1. What do i do?

I am doing a vending machine project for my computer science class. I really don't know to much. It is button oriented so no text boxs. I have a label for my Cost amount but i don't know how to make the cost show when i select A1. What do i do?
I presume that A1 is button 1 in column A.
You would probably start by creating a separate button click event handler for each button, by double-clicking the button in the designer. A template event handler for the click event will be created. Now add the code
LabelCost.Text = A1Cost.ToString
You night want to get fancy and format it as dollars and cents. The problem is that it will become impractical to keep a separate variable for each item cost, and you will probably need a description for the item as well as cost. Also, that code
needs to be repeated for every button. A better approach is a collection of some sort for the products - a dictionary is convenient - and a common handler for all buttons.
Option Strict On
Public Class Vending
Dim Products As New Dictionary(Of String, Decimal)
Dim Selection As String = ""
Dim ItemCost As Decimal = 0D
Private Sub Vending_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Initialise Products
Products.Add("Apple", 1.2D)
Products.Add("Banana", 2.4D)
Products.Add("Orange", 1.5D)
'Initialise Buttons
A1.Text = "Apple"
A2.Text = "Apple"
A3.Text = "Banana"
A4.Text = "Banana"
A5.Text = "Orange"
A6.Text = "Orange"
End Sub
Private Sub Button_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles _
A1.Click, A2.Click, A3.Click, A4.Click, A5.Click, A6.Click
Dim B As Button = CType(sender, Button)
Selection = B.Text
ItemCost = Products(Selection)
LabelSelection.Text = Selection
LabelItemCost.Text = ItemCost.ToString
End Sub
End Class

My iphone 5 has been accidentally put in washing machine iv dried it out but the screen has water behind the glass i don't know what to do replace the screen or buy new phone help

my iphone 5 has been put in washing machine by accident and i have dried it out it works but there is water behind screen pleasehelp dont know what to do i can repair would it be best to buy new screen
HELP!!!!

It is likely that the device has unrepairable harm done to it having it washed in the washing machine. However, one thing that could be tried would be to have the device placed in a glad bag full of un-cooked rice and leave it there for 72 hours to see if this will absorb residual moisture showing up on the display glass. It could be assumed that if there is that much moisture showing it's unlikely attempting to draw out moisture will be sucessful.
Good luck.

My Iphone 4 has been put in the washing machine by accident - help!

My Iphone 4 has been put in the washing machine by accident - is there any way it can be saved!!

Most likely it has suffered hardware damage in which case you'll need to take or send to Apple and pay for replacement, either under your AppleCare+ plan if you purchased the plan or by paying Apple's standard out-of-warranty replacement charge:
http://www.apple.com/support/iphone/service/faq/
Regards.

Nano and washing machine --help!

So, my daughter sent her ipod nano through the washing machine and it now filled with water. Obviously this is something Apple won't deal with directly, so I appeal to cyberspace. Any ideas on what can be done? How do I open the ipod to dry it out? My 1 year warrantee being voided at this point is not much of a concern. Any and all ideas are welcome. Thanks.

just let it sit for about 2 to 3 weeks it may dry out but it is probably damaged beyond use
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Ipod 4th gen went into washing machine Help?

My son's ipod was in his jeans pocket and I put into the washing machine - not in there long - what can I do?

Do not try to turn it on or charge it. That would likely kill it.
Let it dry for a week or so, then try it.

Is there any hope for a Nano 6th gen that went through the washing machine?

Is there any hope for a Nano 6th Gen that went through the washing machine? All of the devices contents are showing up in iTunes when connected but the device itself is not working.

Hello kpratta,
There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
www.apple.com/support/ipod/five_rs/
This has the best chance. The rice absorbs any liquid in the ipod.
Hope this helps.
~Julian

IPhone + Washing Machine = constant reboot??

Hey Guys,
As the title suggests, my iphone had a run in with the washing machine last week... it was in there for 10 or so minutes before i noticed and retrieved it... i dried it using the rice + blow dryer method for 4-5 days and then tried turning it on... much to my surprise and pleasure the oh so familiar apple logo appeared. Unfortunately it didn't go away, and then the little cog wheel started spinning and eventually the iphone turned off, but then instantly turned back on again... this goes on for as long as its got power... each incident is of different times (ie, could be 2-10-30 mins before rebooting). i tried restoring it, twice, but both times, after its rebooting to finish, the cycle starts over again. the first time it was very difficult to get itunes to recognising it, the second, i put it into DFU mode and itunes did its usual thing - mind you the screen was blank while in DFU, but did show the usual restore things.
Any ideas??
I may be going out on a limb here =P but im assuming that 'water damage' isn't covered in the standard warranty. And if so, what are my options if the iphone is dead, considering im not likely going to fork out AU$800 for a new one to replace it.
I live in Australia and on an Optus 24 month plan with about 19 months left (if that makes any difference.)
Please Help,
And thanks in advance,
Farley

Thanks for your help...
I Sent it off to Apple for 'repair' using the OOW service you mentioned. Still waiting for it to be returned/replaced however i would just like to point out how efficient and easy it was with them. Just called up and within minutes i was ready to send it off for 'identification of problem'.
If anyone happens to fall into a similar situation (and i hope that you don't) its worth considering when all else fails. Compared with the price of a new iphone, this isn't too much to ask for to bring your 'baby' (sorry, i count help myself) back to life.

Ipod nano in a washing machine

is there any hope for a 6th generation nano that went through the wash machine??

Oh boy. Check this article (check the rice method, i've heard it works [sometimes]) for help! If doesn't work, then try rapping the ipod in a towel and letting it set in sun all day!

Worst customer service for delivery of washing machine

We ordered a washing machine online on Sunday that was to be delivered today (Tuesday). when the delivery guys showed up they said they could not install our new washer because we didn't buy a new pedestal. THey would not put on our existing pedastal because they were a "contractor" of Best Buy, but they said to call a store and schedule a service technician to come out to install it for us and assured us that would work. My wife spent 2 hours on the phone with various team members of Geek Squad and then I took over as they needed to talk to the "purchaser." I was on the phone with them for another hour and after a lot of back and forth I finally got a Geek Squad 4th level support person (Tony P) that said he talked to the warehouse and that if I called back after 4 or 5 p.m. that they would schedule someone to come out. I called back at that time and I was transferred to the warehouse. The gentleman I talked to at the warehouse said there was no way that anyone would come out. I told him that I am getting the run around and I am not satisfied and someone needs to get this elevated. He was very rude and did nothing...I called back to the Geek Squad line to try and reach Tony P, but he was gone for the day so someone else started to help me....she called the warehouse and the warehouse personnel were rude to her too. she was going to file an internal complaint. I apologize for the long message, but we are most likely going to return the washing machine and not buy anything from Best Buy again.

Hello mdog,
I apologize for the apparent tardiness of my reply. We do our best to address our customers' concerns as promptly as possible and in the order in which they are received.
I was disheartened to read about your washer delivery experience. and your subsequent numerous attempts to have your installation completed. In similar circumstances, I know that that I would be very aggravated as well. Were you given an explanation by the warehouse staff or the delivery team as to why your new washer could not be placed on the existing pedestal?
While I understand why you might have chosen to do so, I was very dismayed to read that you have elected to make your purchase through a competitor and return the washer you've already received. It is my hope that you will one day give Best Buy another chance to win you over.
Please know that I'm very grateful that you took the time to share your concerns with us.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Yesterday i accidenttly Washed my ipod touch in the washing machine!!! What do i do??

Yesterday, i accidently washed my iPod touch in the washing machine!!! help me!!

Do not turn on or charge until it is dry. To dry place the iPod in a sealed container with a desiccant (uncooked rice works) for a week and change it daily. The try:
iPod touch: Hardware troubleshooting
It may or may not work OK afterwards.

What do I do when my ipod goes through the washing machine?

my ipod shuffle went through the washing machine, earbuds and all.Can someone tell me how to properly dry it out or care for it?

When electronics get emersed in liquid, it's not the actual water that causes them to break (although if you spilled something like coke with a bunch of sugar, the sugar would stay in the device even after the liquid of the coke dissolved). What breaks the device is if either it was on when it was emersed in water, or if you turn it on before all the water can evaporate. If so, the water will conduct the electricity between the wires and short circuit the device. If you weren't thick enough to try and turn your device on immediately after you took it out of the washing machine, then it should be fine if you just let the water evaporate. Another technique (to make the water evaporate faster and, on rare occassions, to save a device if you've turned if on while there was still water in it) is to put the device in rice and let it sit overnight. Hope this helps.

Labview washing machine simulator help

Similar Messages

Maybe you are looking for