Labview webcam Problem

Could anyone help me, please?
I've download LabVIEW webcam library from Peter Parente'Homepage
http://www.cs.unc.edu/~parente/labview/webcam1.4.zip
I use my webcam to capture indicator display screen but the charactor that i get is reverse (like look in the mirror)
Could anyone suggest me how to solve this problem? Is there any VI to flip the image and can use with Peter's Libray? I use LabVIEW 6i,sir
Thank you very much
Attachments:
display_capture.JPG ‏9 KB

Hi Prart
1.- If you have IMAQ vision 7.1, download USB IMAQ driver fron this web and will have no such problems.
2.- If not, convert your image to a 2D array an see attached picture about how to revert image.If it does not run for you, try transpose 2d arrrays.
Hope it helps
Cheers
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
mirror.jpg ‏20 KB

Similar Messages

Need help: Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness

Hello, dear all
Please help me!
Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness?
nsOutGoing=new NetStream(nc);
nsOutGoing.attachCamera(m_camera);
nsOutGoing.publish(filename, "record");
I want to control the Brightness,Contrast,Saturation and Sharpness for the recorded flv file.
At present, I only can control the videodisplay object, but I can not able to control Camera.
Thanks very much!!
kimi
MSN: [email protected]

Can I change a Video object to to Camera object, If yes, How do??
nsOutGoing.attachCamera(video as Camera);// it does not work rightly
thanks

Webcam problem pavilion dv6

this is pavilion dv6. my webcam doesn't start manually or automayically on internet. cyberlink webcam has been installed as the software. what do i do?

Hi @Madwho,
Welcome to the HP Support Forum!
I understand that you are having webcam problems. I am happy to help you, but it would be best to get the full product number and OS version. Please read the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
See the following pages I have found that should assist you with this problem. I am including some pages on several possible problems to try to cover most of the bases as I do not know your OS and full computer. Hopefully one of these shots will hit the basket.
Webcam Troubleshooting (Windows 8)
Webcam Troubleshooting (Windows 7)
Fixing Webcam After Changing the Operating System
Webcam Drivers
YouCam Quick Setup
Using CyberLink YouCam to Capture Videos and Pictures, using the Webcam (Windows 8)
Testing a Webcam Using YouCam
Please let me know if this helped at all or if you need more. If you do please post any results or error messages you had, plus the product number and OS versions as I mentioned in the beginning.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Dv6-1030us Webcam Problem

I have a dv6-1030us computer and it seems since I installed Vista Service Pack 2 the built in webcam works intermittently. (I noticed the problem too long after I installed SP2, so I have no easy route back to SP1) Most of the time it simply doesn't work; when you open the HP MediaSmart webcam program, your hear the sound of a usb device unplugging and get an alert that the "Connection to the video device was lost". If you check device manager the webcam still shows up as there and I don't see anything else missing.
Occasionally - and I have not been able to reproduce a chain of actions that are repeatable to help solve the problem - the camera does work. Probably less than 5% of the time. I have called customer service and they said other people are reporting a similar problem, but I have yet to see anyone post. I am wondering if I simply have a hardware failure with the camera. I have updated all drivers and have the latest bios version f.24. Any suggestions?

I've had this laptop for two years without a webcam problem. Upgraded from Vista to Windows 7. My webcam stopped working. If I go into HP MediaSmart Webcam it shows an image for a few seconds and then it loses its connection. I can't get it to work in the latest version of Skype anymore. It's not even an option to choose from. The only option is a Cyberlink webcam filter that I've never noticed as an option before. Any suggestions?

Hp notebook G62-b25SA Webcam problem.

G62-b25SA
XR524EA#ABU
Windows 7, 64 bit.
I have never been able to use my built-in webcam. I have installed the latest Youcam drivers and still an error message - "No webcam detected, if you are using an integrated camera make sure that it is turned on".
I have also followed instructions on this website - I have gone to Device manager and "scan for hardware changes" but I never get an icon for "imaging" hardware.
I know the computer has the hardware as my parents have an IDENTICAL computer - bought from the same shop at the same time!
Please help!

Hi
You have a couple of options as I see it please try these steps might help you to fix the issue.
Fixing Webcam Problems in Windows
Testing a Webcam With MediaSmart in Windows
If both these links does not work then you might have to call HP Techincal support and get the part replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

LabVIEW webcam

I have posted a freeware library library that is capable of grabbing images from any USB webcam in Windows 98/2000/XP and displaying them on the front panel. A number of conversion tools are also included to convert the webcam images to and from the IMAQ format for image processing and display.
The library can be downloaded from http://www.mindofpete.org/ under the Ideas section and LabVIEW webcam library.
Pete

Pete,
This is a very nice toolset. If you are interested in developing more open source LabVIEW software, check out OpenG.org .
-Jim Kring

Lenovo usb webcam problem

I have a Lenovo usb webcam. I believe all was fine out of the box until I started also using Logitech usb headset. Now not working with or without headset. No idea why headset would matter, but that's the only relevant event I can think of.
dmesg | tail
yields
usb 1-1: new high speed USB device using ehci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
gspca: probing 17ef:4802
vc032x: check sensor header 20
vc032x: Sensor ID 143a (3)
vc032x: Find Sensor MI1310_SOC
gspca: probe ok
gspca: probing 17ef:4802
And
cat /dev/video0
cat: /dev/video0: Input/output error
And
mplayer tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0 -fps 15 -vf screenshot
MPlayer SVN-r29411-4.4.0 (C) 2000-2009 MPlayer Team
137 audio & 299 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: Lenovo USB Webcam
Capabilites: video capture read/write streaming
supported norms:
inputs: 0 = vc032x;
Current input: 0
Current format: unknown (0x4745504a)
tv.c: norm_from_string(pal): Bogus norm parameter, setting default.
v4l2: ioctl enum norm failed: Invalid argument
Error: Cannot set norm!
Skype, for example, knows that I have a lenovo usb webcam in preferences but can't test the webcam.
This problem is robust to reinstalling the system.

Hello davidoff!
Did you read this ?
http://wiki.archlinux.org/index.php/Webcam_Setup

Lenovo 3000 N200 0769-K2G webcam problem

Hi All,
I bought this machine a while back with Vista OS. Downgraded to XP and my problems began. Couldn't find webcam driver so went back to Vista Business and still cant seem to work out the issue. In device manager I've got Intel (R) ICH8 Family USB Universal Host Controller 2830, 2831, 2932, 2834, 2835, 2836 and 283A in addition to 7 USB Root Hub (if that info helps).
someone suggested using Yawcam, tried that but no luck. There is no webcam driver on lenovo website which is strange. Please help.
SH

there should be a key to activate the camera. ( fn + something )
check your manual or take a look at the f keys for camera icon.

Labview Graph Problem

Hello,
I have a problem with a tool witch takes excel columns and plots graphs.
The problem is that when i create the png of the graph it additionaly appears the poit (0;0) witch should be on graph.
In the preview i can't see this point. I attached an example.
Attachments:
Daimler Star22_unknown_unknown_unknown_ACCX_Offset vs temp.png ‏13 KB

Have you tried putting a probe onto the data going into the graph to check there aren't any extra data points (i.e. at 0,0)?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

LabView installer problem : undetected CRIO in MAX

Hello,
I'm working on a data acquisition project in LabView 2010 SP1 composed by a LabView Host program (XP SP3 PC) and a CRIO acquisition module. They communicate together through Shared Variables and Network Streaming.
I made an installer of my Host project composed by: runtime 2010 SP1, MAX, NI-RIO 3.6.0 driver and Microsoft Silverlight .
I created this installer on my Dev PC and installed it to a Client PC (see the joint image). The whole program works on the Client PC and the data exchange (Shared Variables and Network Streaming) is OK.
The problem is that the CRIO is not detected by MAX in Remote Devices. On the other hand, when I use the NI Network Browser, it works well (it detects the CRIO).
The other problem is that, even if I have installed the NI-RIO 3.6.0 driver, the RIO Device Setup is not present on the Client PC.
If I install all the standard drivers from the NI device Drivers DVD, it installs everything and then the CRIO is well detected and the RIO Device Setup is also installed.
My conclusion is that I haven't included all the necessary packages in my installer.
What are the necessary components to install in order to have:
the CRIO fully detected
the RIO device setup installed
Must I also install some DAQmx components ?
Thanks in advance for your help.
Attachments:
Ni-programs.jpg ‏87 KB

There is a difference between a network and subnet. I have a similiar problem where I can see the device but can not configure it. You can tell if you are on the same subnet by retireving the ip address for the client and get the subnet mask of the client machine. The example is the following:
client machine ip address 192.168.20.37 subnet mask 255.255.255.0
CRIO machine 192.168.22.15
They are not on the same subnet. If subnet is 255.255.0.0 it is on the same subnet.

Labview Synthesiser: Problem outputting sound via MacBook soundcard

Hi all!
First time posting here, hopefully i'm in the right section of the forum. Anyway, i'm a part time student and currently studying a module on Labview in university. As a mini project i decided to build a synth using Labview. I've it mostly built but i'm having a bit of trouble outputting sound to the soundcard. I'm also having a bit of trouble getting the waveforms to play for a longer time period.
I was sort of copying the setup of one of the example VIs (generating sound vi i think) and another vi i found online but i can't seem to get mine to work using my synth design. I've two problems, one is that the waveform only plays for a very short time but the main problem is that i'm getting an error (error 4803) saying the soundcard cannot accomodate the specified configuration but as far as i can see my setup is more or less the same as the generating sound vi (which works on my fine macbook). Obviously i'm missing something so i decided to come on here and ask for help.
I'm guessing the datatype connected to my sound output configure vi could be causing a problem since it has a red dot on the input terminal. Any suggestions on how i should fix this?
I've my vi attached. Any help would be appreciated!
Cheers!
Edit: I've already fixed the error 4803 problem. Had to change the input to the sound output configure sub vi. Now i just have to figure out how to get the sound to play for longer. Any ideas anyone?
Solved!
Go to Solution.
Attachments:
LabVIEWSynth.vi ‏94 KB

OK. You have several problems.
The cluster order in your Format cluster is Rate, Bits, Channels while the order in the "sound format" cluster on Sound Output Configure.vi is sample rate (S/s), number of channels, bits per sample. LabVIEW connects clusters according to the cluster order. How to avoid this: Pop up on the sound format conpane terminal on the Sound Output Configure.vi icon on the block diagram and choose Create Control. That will put a control with the same names and cluster order on the front panel. You can edit the names if you wish as long as you do not change the cluster order. The alternate is to Unbundle the data from your cluster control and then bundle it to the input cluster. I show this in the modification of your VI attached.
The VI does not respond to the Stop button until the event structure executes, which only happens when a key is pressed. Fix: Add an event case for the Stop Value Changed event. I show this in the modification of your VI attached.
The VI does not recognize changes in Octave, Amplitude, Osc Select, or Filter Frequency until the second keypress after changing any of these controls. Why? Dataflow. Those controls are probably read within microseconds after an iteration of the for loop starts. They are not read again until the next iteration regardless of when or how many times they are changed. The loop will not iterate until the Event structure completes, which only happens when a key is pressed. The Fix: Event cases for Value Changes on those controls. Note that this does not work because now there is no defined frequency. So, you also need some shift registers. Because of the problems mentioned, I did not put this into the modified VI.
Next, the event structure freezes the front panel until the code inside has completed. This becomes quite apparent when you set the duration to 2 seconds and press several keys quickly. The fix to this and the problem in the paragraph above is a parallel loop archtitecture, such as the Producer/Consumer Design Pattern.
Not a problem but a different way of doing something: Use Scale by Power of 2 from the Numeric palette in place of the case structure connected to Octave. I show this in the modification of your VI attached.
Now to your question about tone duration: The duration of a signal generated by the Sine Waveform.vi and the others is determined by the sampling frequency and the number of samples. You are a student so you can do the math. You need to adjust the number of samples because the sampling frequency is fixed.
The modified VI works fine on my iMac.
Lynn
Attachments:
LabVIEWSynth.2.vi ‏89 KB

S-10 Webcam Problem

I have googled and searched the whole forum before posting this, but I haven't found any solution to my problem
My problem is simple but irritating, my webcam haven't been recognized by windows 7, as it shows as "Unknown Device" under device manager
I have tried updating the driver, installing the bison camera of the other s10 model (don't recall the specific model), uninstalling the driver then restarting .... No luck, windows 7 still notifies me as there is an unrecognized USB device
The following info is in the driver status: Windows has stopped this device because it has reported problems. (Code 43)
can anyone help me please ?

tried that, no luck

Labview timing problem

I'm kind of stuck with a bit a problem in Labview 7 (base ed.). I've got a PCI-6036E that can sample at 200KS/s with a 24bit onboard timer.
I've got to set up an experiment that monitors a current indirectly through a potentiostat (1A = 1V scale). The program needs to integrate the current/voltage with respect to time until it reaches a specific value and then tells the program to generate an analogue signal output (this will over and over)
Surely it should be quite straight forward to read a voltage on one of the inputs, summing this value in a loop until this limit is reached, then outputting a voltage.
The problem is I'm not quite sure how to approach this considering that I need a time interval of the loop to be ~1-10 microseconds.
Many thanks,
Paul

The only way you're going to get microsecond loop speeds is to move up to the new FPGA board, currently only available for PXI.
Under Windows, or any GUI OS for that matter, loop speeds and determinism get shaky in the double digit milli-second rates, and anything less than 10 mS is really not reliable. LabVIEW Real Time can get much better loop timing, but you're still limited to the milli-second rate as the CPU can't process any faster than that.
Anything running on the FPGA is running in hardware and extremely fast and deterministic loop times are possible. I�ve run them in the nano-second range just doing some testing. Data from applications running on the FPGA can be accessed from La
bVIEW Real Time, LabVIEW or both so you can control what�s going on.
Your best bet would be to either call NI or your local NI rep and have them get you some more info.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Labview addons problem

While opening an existing project, I have been prompted to find the control named "Telnet Session.ctl". The labview is trying to load it from "\addons\internet\telnet\telnet.llb\Telnet Session.ctl", but couldn't find it. What should I do? I also see this box during the process.
Solved!
Go to Solution.
Attachments:
addon.png ‏15 KB

Thanks Dennis. In will have a deeper look into the problem. For now, I think it needs telnet functions since one of the error I am getting is SubVI 'Telbet Read.vi'ubVI is misssing. Another is 'type Definition 'telnet_handle': type definition not found or contains error' and many more.

Labview memory problem

I have an application generated by IOTech for using their analog I/O Card with LABVIEW 7.1. When I start the application. My task manager shows Labview.exe size about 30000K. Then after it goes on increasing with no final limit. This causes my PC to slow down and some time to crash situation. What is the reason for such huge memory increase, I dont understand. The file is attached here with with a hope to get solution.
Thanks.
Attachments:
DaqBoard 1000 High Stress_v71.zip ‏1056 KB

That is chowing down 1.8 Meg a minute so that would be a problem. You options are:
Add more memory to a point where you can complete a test
Set break points in the program to identify what step or steps are allocating the memory. Once identified you can make a decision to limit total memory consumed (use delete array at certain size) or FIFO data to disk to to prevent PC from crashing.
Hope this help,
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Labview webcam Problem

Similar Messages

Maybe you are looking for