Labview will not recognize Sony camera connected via ethernet.

I have a Sony camera, model XCG-SX97E, and have been trying to interface it using Labview. I was told that the easiest way to do so is using the NI Vision packadge. However it became quickly appearent that Labview will not recognize the camera at all. It is connected via ethernet directly to my computer. I have tried using NI MAX and Instument I/O assitant, neither of which displayed ethernet or the device as an option. I have never tried to interface a third party device before and am at a loss at how to proceed. If it helps to know, my computer has only one ethernet port, which is taken up by the camera when connected, and it has an Intel 82479LM Gigabit ethernet network connection.

After talking to tech support, I have dont the following:
1) Uninstalled Sony drivers
- This allowed the camera to show up in MAX
2) Created a homemade cross over cable because I do not own one
3) Disabled my firewall
Now, when I try to acquire an image in MAX, I get the error 0xBFF69031: "The system did not recieve test packet from the camera."
I have tried all the suggestions listed on http://digital.ni.com/public.nsf/allkb/4D0ECFAA9AD9FF3E8625792600551A1E and have had no luck.
I am now going to try the solutions found in this thread: http://forums.ni.com/t5/Machine-Vision/0xBFF69001-0xBFFF800B-errors-with-GigE-JAI-CV-A10GE/td-p/1742...

Similar Messages

HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
Thanks

Hi,
Did you solved this problem?
I have the same situation here...
Regards

Aperture will not recognize my camera

I am having two issues with Aperture that just started happening.
First... I use to store all my photos on my external HDD. Now, I've disconnected that HDD and am storing my master aperture library on my internal HDD. I've changed my library preferences. That's the only change I've made recently.
#1 problem. Aperture is taking forever to start running. When I click on the icon it easily takes a few minutes for Aperture to load.
#2. When I select File>import it easily takes 2-3 minutes for aperture to bring up the import window and when the import window does load it will not recognize my Nikon D70 slr at all. However, after being connect for, maybe, 10 minutes all the sudden aperture will recognize my camera.
Any ideas?
Thanks!

I have been using a Nikon 5700 camera for the last five or six years. Aperture couldn't recognixe the RAW files. I have been fiddling around trying to figure out what to do, bought software to convert files, copying, altering preference files, etc. What a pain. I just installed Lightroom and saw my entire photo library for the first time since I got my MAC

IPhoto 11 will not recognize my camera or card reader

My new iMac with iPhoto 11, on Lion, will not recognise my camera, a SanDisk card reader or, for that matter, my iPhone 4.
It means that I cannot put new photo's into iPhoto.
From other forums and threads there seems to be an Apple issue but no fix.
Any ideas?
Thank you

The point of using a Different Account on your Mac is that it will tell us if the applications are sound or not. If the problem occurs in another User account we'll know the issue is systemic. If it doesn't then we know the apps are sound and the issue is something in your account.
Basic troubleshooting: try the same things using different cables. If the cable is faulty then that's how we'll know. That fact that other features work using this cable means nothing. A connector cable has several strands. One could be damaged.
Ditto for using different USB ports on the machine.
Regards
TD

Help! Computer will not recognize my camera at all!

Hello, everyone. This is my first post, and I am at a loss as to what to do.
I've had my camera for over a year, and I have never had any problems before uploading pictures from my camera to my PowerBook. However, all of the sudden, last night, my computer decided it didn't want to recognize that I had my camera connected! Both iPhoto 4.0.3 and Image Capture are unaware I have my camera connected. The camera I'm using is a Kodak EasyShare Z730.
Any suggestions as to what I should do? I've tried plugging it in a different USB port, and I've tried restarting the computer.
Any ideas would be wonderful!
Thanks in advance!
PowerBook G4 Mac OS X (10.3.9)

Can you temporarily connect some other USB device to verify that your PowerBook's USB ports are in working order? Do you have another computer to which your camera can be connected to verify that a working USB connection is being made from the camera?
If we can somehow eliminate a hardware issue, then you can focus on software. Have you tried creating a new admin user account? If the new account recognizes your camera, it would narrow the problem down to something within your regular user account.

ITunes will not recognize my internet connection

I purchased an IPhone and downloaded ITunes. It downloaded correctly (as far as I can tell) and will sync the IPhone, but... it will not register the IPhone because it says I have no internet connection. I am connected to the internet! Also, even though I created an App Store account (login), everytime I try to download and I enter my account info.. it says "Authorization failed. Please connect to ITunes". I'm lost cause I can't seem to connect to ITunes..

Problems connecting to the iTunes Store often stem from issues with the Windows firewall or a firewall in a router, a privacy filter (such as McAfee Internet Privacy Service or Norton Internet Security), an antivirus/antispyware utility, or a download accelerator. Start here:
iTunes for Windows: iTunes Store Connection Troubleshooting
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators, or Firewalls
Tunes for Windows could not establish a secure connection to the iTunes Store
iTunes for Windows: Possible iTunes Store Errors
for some basic tips to start isolating the cause of the problem. What you may need to do is temporarily disable any such service and see if that fixes the problem. If so, then if it's a firewall/Internet filter that's causing the problem and you'll need to set the offending service to allow iTunes to connect to the iTunes Store.
Hope this helps.

IMovie 7 will not recognize logitech camera

I have iMove 7 and just bought a Logitech QuickCam Vision Pro. When I brought up iMovie, it wouldn't recognize the camera. What preference did I forget?

You might try posting to the iMovie 08 discussion. This one's concerned with iMovie 4 and earlier.

My PE 9 will not recognize my internet connection

mY pe 9 WILL NOT ricognize my internet connection

What messages is it giving? If the problem is logging in, then that will be because Adobe shut down photoshop.com last year so there is nothing to log in to - you can just ignore the failed log in attempts.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Macs not seeing Time Capsule connected via Ethernet to router

Just bought a new Time Capsule to replace one where the hard disk failed. I have a fibre router which is my primary WiFi network and the Time Capsule is connected to that by Ethernet. The Time Capsule shows up in the Wired connections of the router so I know that the router can see the TC. I have the Time Capsule set up to supply a separate WiFi network under a different SSID for legacy purposes as I have devices that are configured to that SSID before I got my new router.
The new TC will not backup successfully unless the Macs are connected to the TC SSID, failing with the message that the Backup Disk cannot be found. This is different from the behaviour of the last TC where the Macs would see the network drive even when connected to the router SSID.
I'm sure there is a simple setting that I'm missing that would just make this work, but I can't work it out...

There are some issues which have popped up with the TC and some routers.. particularly that the WAN connection is not working correctly.
Try using one of the LAN ports on the TC and see if that helps.
Also open the Network utility in the computer and run the netstat scan .. it looks like this.
Locate the TC on the computer that is having issues.
Then ping it.. use the full domain..
eg in terminal mine is ping tcgen4.local
I think you should rename the TC to all smb names.. ie short, no spaces pure alphanumeric as it simply works better.
Then if the TC shows up in the ping, mount the hard disk manually,
In finder, Go connect to server and type
AFP://TCname.local (use the full domain name of the TC from the netstat scan).. or use the IP you get when you ping it.. although that is going to keep changing unless you can lock it.

Image Capture will not recognize my camera or iPhone4?

After recent updates the image capture now reads "no camera or scanner selected" when my iPhone 4 and/or digital camera are connected. Why? Help? Anyone else with this problem...please have a solution!

Rebecca have you had the chance to restart or do a SMC reset? If not then please do see if that helps.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
Roger

OSX will not recognize my camera

I have a Nikon D70 SLR. It is using a compact flash card to store the images.
I connect it to my computer using a USB cable and Aperture to download the images.
When I connect the camera to my computer I do not get a little Hard Drive icon to appear on my desktop. With other people's camera when I connect the camera I get and icon. Why doesn't it happen with my camera?
Any help is appreciated.
Thanks!

OK.
Thanks guys. While trying to answer your questions I found the answer.
There was a setting on my camera for the USB connection.
It was either PTP
or Mass Storage
I set it to Mass Storage instead of PTP. Do you guys know the difference?
Thanks again.
-Drew

My Mac and/or iPhoto will not recognize my camera.

So I shot pics in RAW yesterday and when I hook my camera it is not recognized. This happened the other day also when I shot in RAW. What would be the problem?

Did you apply the Digital Camera RAW Compatibility Update 2.2? If so the following may help:
"Source:http://discussions.apple.com/message.jspa?messageID=8142169#8142169
Page Title: Apple - Support - Discussions - Can't import Canon RAW's (400D) to ...
Date: Wednesday, September 24, 2008 7:26:47 PM
This might work (from Clem who figured it out):
Delete the file: System/Library/CoreServices/RawCamera.bundle then (re)install the previous version.
Get the previous version here:
http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
Restart your computer. "
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

TS4006 itunes will not recognize when I connect my ipad

Itunes has stopped recognizing myipad when i connect to my PC

That support document was for if the iPhone was not recognized by iTunes. You say now that it is, and that is why you do not see a solution.
I'm not sure about the setting for opening iTunes, because I have automatic syncing turned off. That can be especially important if you are having issues with the phone. An automatic sync can delete things when syncing with an empty calendar, or contacts list. I've always opened my iTunes manually, but you can also uninstall iTunes and reinstall it. If you are using Windows, you need to do this by following this support document exactly. http://support.apple.com/kb/HT1923

My mac book will not recognize my camera to upload my pictures

I have no idea how to get or make Iphoto on my mac because i bought my mc used. I also cannot get exe files to run. Does anyone PLEASE know where I can get this stuff?

Marcie, I apologize that I didn't realize that I was talking to the same person on two different threads....I never put two and two together. Have you tried a different USB cable to the optical drive? Other than that it would appear that the drive you bought isn't going to play nice with your mac. Most, not all usb optical drives will work without a hitch, some just won't. Can you return that drive and buy one from a Mac specialist like OWC....someone that will guarentee that their drive works with a mac.

My iMac will not recognize my camera

I have a Nikon and an iMac OS x 10.7.4 For what ever reason my computer quit recognizing my camera. It was working then it was not. I have restated it. I have charged the battery on the camera. I have relocated the USB cable to the back of the computer. I do not see the icon in my device section. Any Ideas out there?

Most likely it is the CDs and DVDs Application System Preferences. If you don't have the Finder opening it, it won't appear on the desktop. This user tip explains how it might disappear in other methods, because any removable media won't be able to be ejected by the Finder unless it knows to show that kind of media in the correct location:
https://discussions.apple.com/docs/DOC-1015
You posted to the iMac PPC forum. I'll have a moderator move the thread.

Labview will not recognize Sony camera connected via ethernet.

Similar Messages

Maybe you are looking for