LabVIEW with Wibu Key

I have searched this forum and have found the Wibu-Key method of Software Protection mentioned, but no one seems to have mentioned any actual Interface Method / Examples of HOW to tie it into LabVIEW.
So far, Wibu Systems does not have any examples of interfacing with LabVIEW.
Can anyone that has used the Wibu-Key with LabVIEW provide me with some suggestions or examples??

slbLV,
Personally I have not used Wibu, but from the posts from waldemar.hersacher it seems that the Wibu implementation that he was speaking of was for C based programs. There are quite a few good posts about copy protection in LabVIEW though if you search for that. Here is one that I came across.
Application Copy Protection
Hope this helps!
Andy F.
National Instruments

Similar Messages

CodeMeter or WIBU-KEY runtime system is not installed

Hi,
I've got a labview program named "application.exe" and when I launch it, the error "CodeMeter or WIBU-KEY runtime system is not installed" appears.
I can launch Labview.exe, no problems...
Labview version installed: 11.00
Program application.exe created with Labview 8.6
Any ideas?
Thanks a lot

Hi Greg,
Thank you for using the NI discussion forum.
Did you try to install the CodeMeter and WibuKey runtimes (http://www.wibu.com/en/downloads-user-software.html)?
It seems not to be a problem with LabVIEW, but with the software protection dongle used by your program.
Best regards.
Audrey_P
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Journées techniques : des fondamentaux aux dernières technologies pour la mesure et le contrôle/comm...

How can I connect LabView with a PLC S7-300?

I want to use LabView with a PLC S7-300. I think I can use a PC card or RS 232 with a HMI interface.What is the difference? I think I need an OPC server (I don´t know who sell it, National Instruments or Siemens) and I don´t know if I need anything else than LabView6i.
Thank you.

Alicia,
Ben's answer is absolutely correct. "Profibus" is the key word here, and a search of "profibus" from ni.com will provide quite a bit of information. I went ahead and pulled out the main items below. Follow the link below for product catalog info on the plug-in cards and interface software (the OPC Server) required.
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=bymn&cid=1315
For a step-by-step configuration tutorial, please follow this link:
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&BA7CB7B0FFBEA12286256A32005B2BEA&cat=103057DD6D5AE678862568630016C98C
And finally, for examples on how to communicate with this OPC Server, or any other OPC Server for that matter, LabVIEW has some shipping examples. From LabVIEW, goto "Help >
> Communication >> Datasocket OPC". A good one here is the "Demo OPC Client" program, which uses a software OPC Demo Server that installs with LabVIEW. You could pull that open and work with the LabVIEW programming now before you even have the hardware.
Regards,
Greg Caesar
National Instruments,
Applications Engineer

How do I turn on long press keyboard to write the same character many times with one keystroke only? I can only write 1 letter at a time with each key press. To write "aaaaa" I need to press 5 times the A key. I didn't use to do this.

I know this has something to do with INSERT key in Windows I guess. But suddenly I was using Mac OS X Lion and a keyboard sign appeared in the top bar, and the keyboard didnt work as it usually does. I mean, I wanted the long press key to write multiple caracters of course. Please help!

It's now a hidden option that can be turned on with a terminal command. The easiest way to do this is to download TinkerTool from this site:
http://www.bresink.com/osx/0TinkerTool/download.php5
Then go to Tinkertool > General tab > Select "support key repeat".
Logoff and login again.
Regards,
Captfred

Issue in Data from DSO to DSO Target with different Key

Hello All,
I am having Issue in Data from DSO to DSO Target with different Key
Source DSO has Employee + Wage + Post numner as key and Target has Employee + Wage Type as key.
DSO semantic grouping works like Group By clause in sql, is my understanding right ?
Also if someone can explain this with a small example, it would be great.
Many Thanks
Krishna

Dear, as explained earlier your issue has nothing to do with semantic grouping .
Semantic grouping is only usefull when you have written a routine in the transformation for calculations and in error handling .
Please go through this blog which explains very clearly the use of semantic grouping .
http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/06/16/semantic-groups-in-dtp
Now coming to your above question
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          cc          300
If we have semantic group as Employee . If we have Employee as key of the target DSO and update type as summation .
then target DSO will have
Emp                Amount
100                 700
200                 200
In this case Wage type will be the last record arriving from the data package . If the record 100 cc 300 is arrivng last then wage type will be cc .
2) Case 2
DSO 1
Employee WageTyp Amount
100          aa          200
200          aa          200
100          bb          400
100          aa          300
if we do Semantic grouping with Emp and Wage Type   If we have Employee and wage type as key of the target DSO and update type as summation .
then target DSO will have
Emp     Wage      Amount
100          aa          500
200          aa          200
100          bb          400
Hope this helps .

Crystal Report with Compound Key

Hi,
I have Characteristic with Compound Key in SAP BW 7.0. This Characteristic use to store the Purchase Order Item Line. The Compound Key is the Purchase Order Document.
So I will have the following fields created for this Characteristic:
Compound Key (Purchase Order Document) 5600001982, Purchase Order Item Line 10
I created a Query for this Characteristic and I have the following as result:
10 ...
20 ...
30 ...
All works fine.
Now I created the Crystal Report from this Query. When I display this Characteristic in Crystal Report, I have the following:
5600001982/10
5600001982/20
5600001982/30
Is this a bug or Crystal not support the Compound Key?
Please advise, thank you.

Hello,
Did you get this resolved.
Were you able to display characteristics in Crystal without the compounding characteristic.
Thanks.

Crystal Report and InfoObject with Compound Key

Hi,
I have Characteristic with Compound Key in SAP BW 7.0. This Characteristic use to store the Purchase Order Item Line. The Compound Key is the Purchase Order Document.
So I will have the following fields created for this Characteristic:
Compound Key (Purchase Order Document) 5600001982, Purchase Order Item Line 10
I created a Query for this Characteristic and I have the following as result:
10 ...
20 ...
30 ...
All works fine.
Now I created the Crystal Report from this Query. When I display this Characteristic in Crystal Report, I have the following:
5600001982/10
5600001982/20
5600001982/30
Is this a bug or Crystal not support the Compound Key?
Please advise, thank you.

a

BEX - Get Open Items with a key Date

Hi Gurus,
Im working with the Cube and ODS for AR Line items (0FIAR_C03- 0FIAR_O03) and i need to create a report that shows the Open items by Customer with a Key Date.
I did the query that shows all the open items by customer, and i want to know where can i put the filter to input a key date, and only shows the open items until that date.
Thanks in advanced, i really appreciate your help

Hi Marcos,
When you have created the Restricted keyfigures for Open Items, You have to add the date characteristic on which you are looking open item and add the variable there.Here you have to use a variable of type Interval and select the operator "<" the date of the Variable.If you go through, there are standard variable for keydate, which you can use directly.
Hope you got the idea
Regards
Happy Tony

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

I need help with Creating Key Pairs

Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC�� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm��9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B��T� xp ��ccR}o��[!#I��lo��
��^"`8�|��Z>��&
d ��"B��
^5��a��jw9��D��D�)�*3/h��7�|��I�d�$�4f�8_�|��yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.

I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
}

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Maintenance View for custom table with foreign key relationship

Hi Folks,
I have created a custom table with foreign key relationship with other check tables. I want to create a maintenance view / tablemaintenance generator. What all things I need to take care for the foreign keys related fields while creating the maintenance view / tablemaintenance generator.
Regards,
santosh

Hi,
You do not have to do anything explicitely for the foreign key relationships in the table maintainance generator.
Create the table maintainance generator via SE11 and it will take care of all teh foreign key checks by itself.
Regards,
Ankur Parab

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

Mapping in OWB with primary key and foreign key relationship

Hi all,
I am new to this datawarehousing field. I have just started my career. I have to now create a mapping in owb where a table has a field which is a primary key of another table in the same staging area. If you guys could help me out with the a method it can be created that would be very helpful to me.
I thought of 2 ideas,
1. If I can use a look up, but then I am not sure if i can use a lookup for primary key, foreign key relationship. If I can use also, I do not know how to use that.
2. What if I can directly take that the first table and link the primary key of that table to the second table which uses that primary key of the first table as one of its fields.
I do not know how feasible these methods are. Please guys help me out.
Thanks in advance.

I have a similar case where table a and table b having relation but table a got inserted with data and table b is empty so there no values for foriegn key column in table b to realte with table a.
Now i want to load table b foriegn key with primary key column values of table a.
how can we do this in owb
thanks
kumar

LabVIEW with Wibu Key

Similar Messages

Maybe you are looking for