Labwindows/cvi graphic format

Hi,
Does anyone know how to convert an IntensityPlot to a graphical format known
by Word (e.g.pcx, tif, bmp, jpg,...)
thank you in advance.
Bjorn

Hi,
there are two pssibilities:
CVI includes functions to get panels, graphs as memory bitmaps and it is fairly
simple to make it into a bmp and write it to a file.
Another possibility we used is to print panels to a temporary file using for
example a postscript printer driver. Then you get a nice mixture of vector
graphics elements (for the labels, grids etc.) and bitimages.
Dieter
Bjorn schrieb:
> Hi,
>
> Does anyone know how to convert an IntensityPlot to a graphical format known
> by Word (e.g.pcx, tif, bmp, jpg,...)
> thank you in advance.
> Bjorn
Attachments:
dieter.vcf ‏1 KB

Similar Messages

Labwindows CVI problem

hello I´m trying to create an installer for an application created in a previous version of Labwindows CVI that a dont know becasuse i receive just de sources files, i´m working with 2010 version, the problem is that the application run perfect in debug mode but when i run it in release mode the application doesnt work, only the icon in the taskbar is showed but the graphic interface never appears, someone can help me with that
Solved!
Go to Solution.

I check all source files an there is no any #ifdef that could cause problems, the program is correct because is running in an old PC, what i am doing is trying to create an installer to change the program to a new PC, what i receive was just the folders project that are in that machine, but i can do work the program in my machine.

LabWindows CVI 2009 Word_Rpt routines: Document is corrupted: Error reported: The MSWORD.OLB file cannot be opened.?

Using WordRpt support routines with a C application in LabWindows CVI 2009 to format Word files, an error sometimes occurs resulting in the document format being corrupted. An error is generated: The MSWORD.OLB file cannot be opened. I don't know why or how to correct this problem.
Any help you can provide would be appreciated!

Hi LPR1,
Do you have an application that reproduces this. If so, do you mind posting it?
Regards,
Hassan Atassi
NI Community Project Engineer

Error transact.cpp when load LabWindows CVI DLL

Hie,
I'm a "newbie" about LabView, and I would like to call a simple LabWindows CVI DLL from LabView. Then for this
I did also a very simple VI (I think : 2 buttons, the first to call my DLL function and the second to quit
my VI). I define my DLL as indicated by NI, all seems OK. After placing and defining parameters about my
DLL function in the diagram, If I "double clic" on the DLL icon in my diagrram, I obtain :
"Failure Transact.cpp, line 1132 ...blabla...blabla".
Another Time, I obtained a message (when I try to run) about
"not enough memory"
the solution is then to kill LabView Process or shunt Down !!!!!
I've tried my "mini" projet on tow systems and I obtained the same results :
Wind
ows 2000 and Windows NT
LabView 6.0 et Lab Windows CVI 6.0
144 Ram and 256 Ram in the two PC and not another application running during my test :
I think then I should have enough ram to do this !
I did not see my problem
thank a lot in advance for any help
file attachement contain hardcopy of VI
Thierry
Attachments:
Bug_Memory_LabView.doc ‏56 KB

Hie,
Now It's OK !!
After submitting my problem to NI, NI has transmitted to me a simple program :
a VI which simply calls a function in a DLL (which loads an UIR), and their solution runs.
Their solution is the "same" as mine except in mine, I have added calls to "MessagePopup"
just to study how running my program like this (see "// Here ->x" ) :
Extract of my code in my DLL :
int __stdcall DllMain (HINSTANCE hinstDLL, DWORD fdwReason, LPVOID lpvReserved)
int iValue=0;
switch (fdwReason)
case DLL_PROCESS_ATTACH:
"// Here ->1" MessagePopup ("Avertissement", "DLL -> Init Ressources DLL LabWindows");
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
break;
case DLL_PROCESS_DETACH:
"// Here ->2" MessagePopup ("Avertissement", "DLL -> Free Ressources DLL LabWindows");
if (!CVIRTEHasBeenDetached())
CloseCVIRTE ();
break;
The problem is located to the line "// Here ->"
When I drag the icon "Call Librairie function" in the diagram of my VI and I define parameters,
immediately a "link" is established between LabView and the DLL, the __stdcall DllMain is called !
then LabView Environnement failed !, you have then to kill the LabView Process !
By changing the "MessagePopup" functions with tracks (*) in a file, I can "debug" my program and I will
have never this artefacts.
change line // Here ->1 with TraceMsg("DLL -> Init Ressources DLL LabWindows");
change line // Here ->2 with TraceMsg("DLL -> Free Ressources DLL LabWindows");
void TraceMsg(char *szBuffer)
int iValue=0;
int iHandle=0;
iHandle = OpenFile("D:\\Thierry\\Formation LabView-LabWindows\\trace.log",
VAL_WRITE_ONLY, VAL_APPEND, VAL_ASCII);
iValue = WriteLine (iHandle, szBuffer,strlen(szBuffer));
iValue =CloseFile (iHandle);
Thierry

Entering numeric values with suffixes in Labwindows CVI (e.g 100 kHz instead of 100e3 or 100000 )

is there any practical way of entering numeric values with suffixes in Labwindows CVI in order to prevent user from struggling with '0' es.

In LabVIEW there is another Display Format called "SI Notation" that is exactly what you're looking for.
Maybe you can add a feature request in CVI Idea Exchange Forum and ask NI to add this Display Format in CVI too.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Visual Studio or LabWindows/CVI?

I have a bit of a dilemma.
I currently own Visual Studio 2010, IMAQ Vision Development Module 2013, and Measurement Studio (not sure of version). I currently do all of my programming in VB.net. Because IMAQ VDM is stuck in .Net framework 3.5 and there will be no further .net development by NI, I need to plan for the future. My applications need run on Win 8, 9, 43, or whatever my company decides to migrate to from Win 7.
My understanding is that the NI modules I currently own will work with LabWindows/CVI. Correct? I also believe I can use them with C++ using the VS IDE. Is this also correct?
Within my applications I do a lot of interfacing with Excel, writing text files, and interfacing to non-NI devices (cameras, DAQs, scanners, etc). I am able to do these things pretty easily using VB.net using vendor-provided SDK's.
Therefore, my question is this...given the investment I have in software already, do I gain anything by migrating to LabWindows/CVI? What do I lose?
I should point out that regardless of the path I choose I will need to bone up on my programming skills in the corresponding language.
Thanks for all your help!

Hello Steverino!
Here are some advantages when using LabWindows/CVI over Visual Studio, which make the product more suitable for various industry-related applications:
You are correct, LabWindows/CVI integrates with the NI platform: NI hardware and software, like TestStand or LabVIEW (e.g. debugging source code from one software to another, seamlessly).
NI hardware and third-party hardware connectivity.
OpenMP support.
CVI integrates with intrument control.
CVI Run-Time benefits from User Protection.
Run-Time checking (e.g. for uninitialized variables).
Scientific User Interface Controls and GUI Editor.
Advanced debugging capabilities:
Remote debugging support from ADE.
Real-Time debugging support from ADE.
Memory leak detection using the LabWindows/CVI Resource Tracking Window.
Just-In-Time debugging.
Deployment: build custom installers and patches that you can ship as stand-alone easy-to-use installers.
LabWindows/CVI libraries: Advanced Analysis, Toolbox, Connectivity (Network Variables, Network Streams, DataSocket), etc.
Support for LabWindows/CVI Toolkits: SQL Toolkit, Vision, PID, RT.
Regards,
- Johannes.

Software Development Engineer positions at Hysitron, Inc. in Minneapolis (LabWindows CVI exp preferred)

Software Development Engineer
Hysitron, Inc. is a premier scientific instrument manufacturer. Founded in 1992 with headquarters located in Eden Prairie, MN we are committed to promoting nanotechnology by developing advanced transducer and control technology. This leadership has made Hysitron the world leader in nanomechanical test instruments. The TriboIndenter®, TriboScope®, Ubi, and other Hysitron innovations have opened new horizons for scientists interested in investigating and understanding mechanical properties of materials at nano-scale. Hysitron fosters an environment and culture where innovation flourishes, teamwork is encouraged, and superior performance is rewarded.
Hysitron invites applications for multiple software development engineer positions from those aspiring to explore and succeed in the nano world. Hysitron, Inc. is an Equal Opportunity Employer M/F/D/V
Job responsibilities
The software development engineers would be responsible for developing test and measurement software applications for nano-mechanical testing instrumentation. Job deliverables would include:
-          Develop software applications in C based Labwindows CVI for Hysitron Instrumentation
-          Support the development of applications to address challenges in instrument automation and control
-          Test software applications using debugging and simulation tools
-          Perform software releases and software quality assurance activities
-          Participate in the design of new software products
-          Perform maintenance activities for existing products
-          Adapt and deliver on quality software development practices
Minimum qualifications
-          BS in Computer Science/ Computer Engineering/ Equivalent Scientific or engineering discipline
-          Min of 3 yrs experience in Instrumentation software development in an industrial or R&D environment
-          Expert at programming language C, knowledge of C++
-          Working knowledge of various communication protocols, e.g. USB, RS232, IEEE, RS485, TCP/IP, Modbus
-          Knowledge of general software design/documentation processes in test and measurement systems
-          Proficient problem solving skills
-          Strong analytical and technical skills
-          Excellent communication and interpersonal skills
Preferred Qualifications
-          Proficient with LabWindows CVI and XML
-          Working experience with DSP(Code Composer Studio) and/or FPGA level programming
-          Exposure to digital electronics and instrumentation
-          Working experience in Robotics interface programming
-          Experience with Controls/Automation engineering
Application and Information
Qualified candidates should send a letter of application and their resumes to (please include ‘SW Engineer’ in subject line):
Hysitron, Inc.
10025 Valley View Rd
Eden Prairie, MN 55344 USA
Phone: (952) 835-6366
Fax: (952) 835-6166
E-MAIL: [email protected]
Web: www.hysitron.com

This position is still accepting resumes/CVs.

How do I send e-mail to a distribution list using LabWindows/CVI?

I need to be able to send e-mail to a user-defined distribution list using LabWindows/CVI? Has anyone done this? Any ideas where I could look?

I commented on something similar to this awhile back. My issue was that I had the base version and didn't have the Internet classes. So this external app worked like a charm
It has a lot of command-line inputer options to use as well.
http://forums.ni.com/t5/LabWindows-CVI/Need-Help-for-Sending-Email-with-LabWindows-8-5-or-9/m-p/1095...

How to use CAN256 and CAN257 in Labwindows CVI?

I am trying to learn about CAN programming in LabWindows CVI. None of the samples do anything other than generate cryptic error messages. I do not have a card or interface device yet, but reading in the help files I found this:
"NI-CAN provides a virtual CAN card with two interfaces, CAN256 and CAN257. The two virtual interfaces are connected by a virtual bus. When you write CAN frames to one virtual interface, those frames are received by the other virtual interface, and can be read as channels. This feature allows you to read and write CAN data in the same manner as two real CAN interfaces connected by a real CAN cable. The conversion does not require real NI CAN hardware, and your application is not required to check for specific CAN IDs."
I modified the Waveform ouput project and add CAN256 to the dropdown in the uir file. However when I run it, I get the same error message as always, error -1074388725.
Is there an example CVI code someplace to demonstrate the use of these virtual channels?

Thanks Drew.
Ultimately, my customer provided me with a WriteCAN256.vi and ReadCAN257.vi that were perfect for my needs. The WriteCAN256.vi along with my NI USB 8473s allowed me to provide data collection on multiple CAN devices and to verify that my Software can handle all data types from CAN devices.
Note: My customer allowed me to share his .vi's. They are enclosed ...
Best Regards,
Don W
Attachments:
CanBus Read (Frames)_85.vi ‏55 KB
CanBus Write (Frames)_85.vi ‏48 KB

How to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum();

Hi All,
Any one know how to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum() ?
Thank you.

Do you ave some documentation about that dll?
Have you looked into dll properties searching for vendor name? Maybe you can look int vendorìs site and obtain some help.
Ultimately: are you forced to use that dll or can you use any software to calculate the checksum? There are several CRCs that you can use: provided you know which is the type used you could find an algorithm to calculate the CRC and check an existing one.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to set a DMA transfer type for PXIe-6536 in LabWindows/CVI?

I have a PXI chassis PXIe-1078 with a controller PXIe-8115 running under Windows 7. The digital output board is PXIe-6536.
I use a function DAQmxSetChanAttribute to set a property DAQmx_DO_DataXferMech to a value DAQmx_Val_DMA, since I want to use a direct memory access data transfer. This wokred well with a PCI-6534 board using the same LabWindows/CVI code before migrating it to the PXIe system.
Unfortunately, running this code on the PXIe system reports a DAQmx error -200452: "Specified property is not supported by the device or is not applicable to the task".
The task is created in the following simple way (the board name in MAX is 'Dev1'):
   DAQmxCreateTask ("digTask", &digitalTask);
   DAQmxCreateDOChan (digitalTask, "Dev1/port0:3", "DIG_CHANNELS", DAQmx_Val_ChanForAllLines);
   DAQmxSetChanAttribute (digitalTask, "", DAQmx_DO_DataXferMech, DAQmx_Val_DMA, 15);
How can I solve this problem? How is it possible to choose between different transfer types?
Thank you in advance for any hint!

Hi CavityQED,
The PCI-6534 is a "Digital I/O" board while the PXIe-6536 is a "High Speed Digital I/O" board, that's why they don't have the same properties.
By the way you can use DMA transfer with this method :
http://zone.ni.com/reference/en-XX/help/370520J-01/hsdio/direct_dma/
Let me know if it helps you.
Regards.
Mathieu_T
Certified LabVIEW Developer
Certified TestStand Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014

Print preview in abap list format (OMLV) - Need preview in graphical format

Dear All
I am facing a problem with the print preview. (transaction code OMLV)
When i am clicking on print preview button the system is displaying the output in a ABAP list format.
and also the printout shows only the ABAP content.
Pl. advise on how to view the print preview in a graphical format and not in the ABAP list format and pl. let me know the setting to print the spool in the graphical format.
Thanks,
Maxx

Hi,
this problem is not only related to warehouse. even the print preview spool for GR/GI slip in t-code SP01 shows as ABAP list and not as graphical screen.
my question is why does the system shows the print preview for spool as an ABAP list instead of graphical view.
pl. advise
Thanks,
Maxx

How to get bar graph in word in labwindow/CVI ?

how to get bar graph in word in labwindow/CVI ?

ashwinic9,
spawning your question over more and more threads (the present one, this one and this other one) won't give you a faster answer; instead, it will irritate forum users!
Especially if you have at your disposal a fast way to perform a test. I pointed you some days ago to word report example, that writes a table to a word document: did you tried changing the graph into a bar graph and generating the report? I have done it for you and the result is OK, as you can see in the attached document.
Now, since the example works well, there must be something in your particular situation that prevents the graph to be shown; that is: you must add some more data on your actual problem and maybe a small example that exposes the problem.
But please: keep active only this discussion and let the other threads die!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
wordreport.doc ‏38 KB

I would like to know how to transform an API C++ application in MFC C++ application to use the measurement studio components or Labwindows CVI

I don t know the way used to transform a C++ with API program in an MFC application using measurement studio or Labwindows CVI.
Thank you for you help.

You can use the Measurement Studio Add/Remove Components Wizard to add Measurement Studio components to your C++ application. For more information, see the "Adding and Removing Components from Measurement Studio Projects Using a Wizard" topic in the Measurement Studio reference. You can find it in the table of contents under:
Visual C++ Help
Tutorials
Measurement Studio for Visual C++ 6.0
If you're using the Measurement Studio update for Visual C++ .NET, this topic will be under:
Visual C++ Help
Tutorials
Measurement Studio for Visual C++ .NET
- Elton

I used to working with Labwindow CVI and i would like to know how can i use the commands "loadpanel" and "Displaypanel " in Labview. Using Invoke Nodes?

I want to make another panel appears and runs, but i don´t want to use a subpanel. So, i would like to use somenthing similar to Loadpanel and Displaypanel, that you can use in Labwindows CVI, but in Labview, is ti possible?I hope your answers, thank you!!!

Hi Bichillo,
I posted an example here.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000014570100&HTHREAD=000087828&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
It demonstrates how to do what you are asking.
I do not mind you laughing at the code.
Have fun!
Ben

Labwindows/cvi graphic format

Similar Messages

Maybe you are looking for