Lacie 1TB external HDD recently stopped doing Time Machine backups. Disk Utility recommends that the disk needs to be repaired.

I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
It recently stopped doing the backups, so I checked Disk Utility and it recommended that I repair the disk. How long does it take for Disk Utility to repair a 1TB external HDD?
Other things to consider:
- Cant find the disk in the Finder, I used to be able to do that before.
- When I tried to go a Time Machine backup, it said the disk was not available.
Upon using disk utiliy, I successfully verified the disk. Then I initiated the disk repair process.
The current status:
- checking file system
- Volume repair complete
- Updating boot support partitions for the volume as required.
The progress bar says "Verify and Repair volume "LaCie"" - the progress bar does not indicate how much has been done or how long it will take.
Capacity: 1 TB (1,000,204,476,416 Bytes)
Mount Point: Not Mounted
Format: Mac OS Extended (Journaled)
All other status fields blank.
Any one know how long it will take for Disk Utility to repair the external HDD? Any other ideas as to how I can get the Lacie HDD to reconnect with the Macbook and resume normal operations? i.e. Time Machine backups, accessing contents through the Finder.

purduegrad_macguy wrote:
I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
Mine Failed after 3 years and 4 months of using it as a Dedicated TM Backup drive...
When I used Disk Utility for repairs... it went from 7 minutes to 4 hours and after about 10 minutes it was saying 40 hours...
So I just replace it with a New EHD...

Similar Messages

  • HT3275 My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

    My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

    That is our most common error.. ever since Mountain Lion came along with its inability to remember beyond a few hours. where the devices are located.. and so forgets to dismount properly.
    Look at the right hand.. More Like This.
    A simple restart fixes it. ie pull out the power cord.. count to 10.. plug the power cord back into the TC.
    More details C12 here.
    http://pondini.org/TM/Troubleshooting.html

  • Time Machine backup not completed with error "The disk was not ejected probably..."

    I have been using an UBS 3.0 capable external 2.5" hard drive from Lacie to backup my old 21.5" iMac for the last 2 years without problem.
    Recently I bought the new late 2013 27" iMac running 10.8.5 and try to migrate the data from the Time Machine backup without success. After a while, Mountain Lion complained with the below error and only data before this message appear were migrated. When I connected the same disk back to my old iMac and ran disk utility, everything looks fine and I was able to complete the TM backup. Eventually, I managed to migrate the data using network copy, instead of TM backup.
    Now that my new iMac is back online and I tried to setup Time Machine backup using the same 2.5" Lacie drive, the same error message appeared again in the middle of TM backup (after 3 minutes).
    Wonder if anyone ran into the same issue and if there is an issue with the UBS 3.0 port on the new iMac, or there is a work around to this problem.
    Any help or pointer would be highly appreciated.
    Cheers,
    Richard

    The system is losing connection with the drive for some reason, likely because the drive is losing power and unmounting, but there could be other reasons as well. Do you have access to an external power supply for the drive? If so then connect tthat so it is not relying on the USB bus power to keep the drive running. I have also found this to happen with some USB 3.0 enclosures, and it appears to be a compatibility issue with them and Apple's USB 3.0 drivers, so another option is to get a USB 2.0 hub and use that for the connection. Things will not run at USB 3.0 speeds, but the drives will not continually disconnect.

  • I need to reinstall Mountain Lion from a Time Machine backup, but it says that the last backup is 6 months old

    Hi, I need to reinstall Mountain Lion on my MacBook Pro, so I made a backup yesterday and today I tried to reinstall everything from that backup.
    To my surprise, Time Machine says that the last full backup was made on February!
    I've always made regular backups during these months on my Time Machine HD, what can I do to reinstall everything from the backup I made yesterday?
    Thank you very much.

    Most likely, some folders were inadvertently excluded from your backups, and as a result you can't restore your data in Recovery, Setup Assistant, or Migration Assistant.
    Starting from a fresh installation of OS X, set up a new administrator account and log in. Follow the instructions on this page to associate your existing backups with the new installation.
    You should now be able to enter Time Machine and restore your user data from a snapshot.* I suggest you do this in two stages. Quit all applications except the Finder before you begin.
    Restore all the visible items at the top level of your home folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
    Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
    You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
    *If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
    Browse Other Backup Disks...
    from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
    Show Time Machine in menu bar

  • External usb disc used for Time Machine backup disconnects when Mac has been into sleep mode

    I use a 1Tb External usb disc used for Time Machine backup which works fine, but when the Mac goes into sleep mode & powers back on I get a message stating that you should always eject the Drive before removing.
    Any suggestions on how to get around this problem would be welcome

    Look at the root of your hard drive for a folder called Backups.backupdb.
    Or, a sparse bundle disk image for one of mobile computers that might have tried to back up to your Mac.
    If you have those, remove them and try again.

  • Lacie 1TB External HDD just went ghost

    I was using my computer this afternoon and ejected my harddrives to take the MBP to another room. When I mounted everything back, my Lacie 1TB USB 3.0 HDD just didn't mount. I have 2x of the same HDD and a WD 2TB. All of them are Mac Journaled, one Lacie is configured as Time Capsule and the other is just backup for music, FCP files, etc.
    I've switched USB ports, USB Cables, everything. It doesnt show up on Disk Utility either.
    It always asked to Force Eject as Spotlight was forever indexing this HD.
    Any thoughts?

    purduegrad_macguy wrote:
    I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
    Mine Failed after 3 years and 4 months of using it as a Dedicated TM Backup drive...
    When I used Disk Utility for repairs... it went from 7 minutes to 4 hours and after about 10 minutes it was saying 40 hours...
    So I just replace it with a New EHD...

  • How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

    I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive.  Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
    However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box.  This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size.  So I am not really any better off:
    E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available.  Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
    Does anyone know how to resolve this issue without upgrading to OSX 10.6?

    First, how did you prepare your new drive?  See:
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
    Next, clone your old TM volume:
    Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Update to 10.9.3 Stopped My Time Machine Backup from Working

    Hi. Just now I upgraded my Mac from 10.9.2 to 10.9.3.
    I also use Time Machine to back up my Mac to an external drive and I've been using it for years.
    One result of the update from 10.9.2 to 10.9.3 is that I'm now unable to back up to my Time Machine drive. I successfully backed up to it earlier this afternoon at 3:17PM (it's now 4:32PM), but I'm now getting this error message:
    "Time Machine couldn't complete the backup to 'Time Machine Backup.'
    Files can't be copied onto the backup disk because it is read-only. You may need to repair or erase the disk using Disk Utility. If the disk can't be repaired, select a different disk for backups.
    Last successful backup: Today, 3:17PM"
    I shut down my Mac and restarted it, thinking maybe the error would go away, but it hasn't.
    Did 10.9.3 somehow make my Time Machine backup drive read-only? Is there a way to change it back so that it also has write permissions? I can't figure out how to do it. Or am I going to have to erase the drive?
    Thanks.
    M

    I've had intermittent read-only unable to auto-back-up to an external hard drive in general without the OS number considerations as well. Sometimes just a reboot of the computer and/or the drive reset it. As others stated, I also went into disk utility and checked the disk...which took 30 minutes or so. It then always auto-reinstated my ability to write to the disk as well as ungreyed the write permission below it (still in disk utility) so I could click which setting I wanted, and allowed me to use the other info gui to also change the permissions (which was locking me out before the long disk check). I had alternatively tried to use the terminal to chmod my write permissions to that drive, emulating exactly the other drive permissions (which did work), but I was unsuccessful. After doing the long check disk process as above, however, it did show the command line permissions to be exactly as the working disk, surprise surprise. Maybe I could have sudo-ed the chmod command (I didn't try that before giving up and doing the long disk check process) right away. If so, my advice would be to find the path to the disk by using a file inside it (you can drag something to the terminal to auto-write the path), use ls -l to look at the permissions you want to emulate, and sudo chmod [permission] [file] using this wiki http://en.wikipedia.org/wiki/Chmod.

  • I have a 250GB western digital external hard drive for my time machine backups. if i just want to backup and recover my photos and movies how do i do that with time machine?

    I have a 250GB western digital external hard drive for my time machine backups. I did not download the software that came with the external HD. If I only want to backup my photos and movies from my Macbook how do I do that in Tme Machine with my external HD?

    Format the HDD in Disk Utility>Erase to Mac OS Extended (Journaled) and the open System Preferences>Time Machine and set up the external disk as the Time Machine HDD.  Then look at the Options, and exclude what you do not want backed up.
    Ciao.

  • HT201250 Does Time Machine backup and restore Bootcamp?

    I am replacing defective hard drive in an iMac that I primarily use as a pc under Bootcamp.  I have to find some way to clone and restore the bootcamp partition.  I was told today by a Genius at the Apple store that I should buy a 2 TB external (which I did for $150)  and run Time Machine.  He assured me that my bootcamp partition would be backed up along with the entire mac partition and that I would be able to restore everything perfectly on the new hd. Now that I am home and continuing my research, I can't find anywhere that says it will work.  Documentation on Time Machine fails to  mention bootcamp.  So, does Time Machine backup and restore bootcamp or not?  And will it be bootable after the restore?  Help!

    I think you've got it! I have never used WinClone so I cannot attest to how well it will work, but it's pretty much all lthere is. You will have to create a new Boot Camp partition on the new drive, and it should be the same size as the partition you cloned.
    Be sure you prep the new hard drive:
    Drive Preparation
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Quit DU upon completion and return to the installer. Now install Snow Leopard or restore from your Time Machine backup.

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • Does Time Machine backup items on the time machine disk?

    If I designate disk B as my Time Machine disk, are items on disk B, that aren't part of what Time Machine puts there, backed up?  In other words, can I use a disk for both storage and Time Machine backups and have those stored items backed up too?

    If you intend to use disk B as both a Time Machine Backup Disk and a Data disk to hold your files, the only way to do that would be to partion the Disk B volume.
    How do I partition an external hard drive ?
    When an external is connected to a mac, the computer sees that Hard Drive as a Volume. Paritioning the volume is the ability to "Split" the volume in more parts that are limited by size. Time Machine will use the entire partition of a volume if the whole volume is used as a single partition. If you use the right tools and "Split" the external hard drive in smaller logical volumes then you can comfortably use the external hard drive for both your Time Machine Backups and your Data that you want to carry on an external drive.
    The easiest way to partition a volume in more the one partition or logical volumes is to use the Disk Utility application that comes with every mac. Use the Finder to go to your Utilities folder and open Disk Utility, or search for it in Spotlight.  Whit Disk Utility you can select your external Hard Drive and either change the partition to add a second one or erase all data on the existing external hard drive and create 2 Partitions that you can adjust in size. Remember Make sure you understand that if you choose to erase the existing external drive to make room for a new partition , that all data present on the external drive will be deleted.
    Now that you have your two new partitions you can assign one to Time Machine and use the second one for Data. And with Time Machine Options you will be able to exclude or include your new external data partition to backup to your new Time Machine Backup Partition !

  • Does Time Machine backup iCal?

    I had a problem with some lost todo items the other day and checked to see if I could see a backup calendar as a quick way to solve the problem. If I am on address book and enter time machine, I see backups of my old address books and if I am on mail, I get all my old mail messages on the screen (though the todo item is grayed out), but if I am on iCal, I simply get the Finder window.
    Does Time Machine backup iCal or do I need to do a manual backup and then let Time Machine backup that file from finder?

    Since reading some of the first messages, I have been backing up my calendar each week and putting the backup file in my documents folder. I know that file is backed up, so I assume in case of a major problem, I could pull it from Time Machine and restore the data.
    Out of curiosity, though, I explored the folders in my library/calendar path and found a number of folders, each containing a file that was dated either today or within the last few days. I assume each folder is for a different calendar and that in case of total disaster, I could restore these from Time Machine.
    My question at this point: When I export the calendar from iCal, if the All Calendars option is checked, am I safe in concluding each of the separate calendars would be there? If I accidentally had one calendar highlighted, would only that calendar be backed up?

  • Accidentally converted my external hard drive to a time machine backup

    Hi there, got a problem. I accidentally converted my external hard drive to a time machine backup and it re-formats my hard drive. What should i do to get back my data? It happened during my first time using a Mac book Air...
    Please help. Thank you.

    As Link pointed out in that thread, there's a lot excluded:
    Dec 26 12:29:11 Branch-iMac com.apple.backupd[3876]: Backup content size: 340.7 GB excluded items size: 256.3 GB for volume Media Server
    Thus there should be about 80 GB that's included.
    And part of it WAS backed-up:
    Dec 26 15:43:56 Branch-iMac com.apple.backupd[3876]: Copied 3986 files (13.6 GB) from volume Media Server.
    He's also shown some things that aren't being backed-up, and suggested a couple of things to do, but you haven't responded to his last post.

  • HT201250 Every time I add/delete music to itunes, does time machine backup my entire library?  If so can I limit backup just to added music?

    Usimg time machine-every time I add/delete music in itunes library does time machine backup entire file? If so,an I set it up to just backup added music?

    It shouldn't be backing up the whole thing again, just the changes.

Maybe you are looking for