LaCie 500g Big Disk getting hardware error on new Mac Mini

I accidentally unplugged the power cord on my new MacMini (it looks and feels very much like a firewire cable!) After that my LaCie Big Disk became unsearchable. It WILL mount with both Firewire and USB2.0 cables. I ran Disk Utility. I do not get the option to repair ANY permissions on either the Volume or the Disk itself only the option to "Verify Disk" or "Repair Disk". The resulting error is posted below. It is no longer searchable on the OS 9.2.2 G4 computer either.
I DO have the latest software updates. This external LaCie hard drive was Mac HFS+ formatted and working previously on OS9.2.2 and I will need to switch it back and forth between the OS 9.2. computer and my new MacMini. Have I any other choice but to reformat? If so which format will allow back and forth usage between OS 9 and OS X?
Disk Utility Error:
"Verify and Repair disk “LaCie 500 GB”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Mac Mini1,1 Mac OS X (10.4.5) 2 g ram, SuperDrive, LacieBigDisk external"
Mac Mini Mac OS X (10.4.5) 2 gb memory, SuperDrive, Intel DualCore

Hi Kim, I had a similar (although not exactly the same) experience to yours when I first got my LaCie (which is a d2, 250 GB) and accidentally cut power (with the power button on the HD itself) to the disk while my computer was in sleep mode. Since it was my boot drive, I also got kernel panics, and the only way I was able to get rid of them (and get a working system) was an Erase & Install of OS X. Fortunately, I was able to retrieve all my files, but you seem unable to browse it anymore, I guess that's what you mean when you say it isn't "searchable". Hope you had a good backup solution ...
What Disk Utility reports - Invalid Node Structure - is exactly the same issue I had, and Disk Utility doesn't seem able to repair it easily. Since you don't seem to use the drive to boot, you can simply reformat it using Disk Utility. I would suggest HFS+, and if you want to boot OS 9, select the "Install OS 9 drivers" option.
BTW I'm not sure whether you can get a dual-boot OS 9/OS X for Intel system (in case you'd be interested), because booting off an external drive on a Macintel requires the drive to be formatted with the GUID partition scheme, whereas OS 9 porbably only works with Apple's partition scheme.

Similar Messages

LACIE 500g Big Disk Extreme -Daisychain or not

I have three LACIE 500g drives (and 2 smaller 250's) that I will be using to edit a small feature. I was wondering if(due to space issues) there is any downside to connecting one to the firewire 800 port on my computer and then daisychaining the rest off of that one, each connecting into the next. Am I losing anything (spoeed etc) by doing this rather than connecting each on into the computer inividually?
Dave

You'll gain throughput only if you built a striped array (RAID) and use a third-party FW800 card to connect the additional drives. You will also be at greater risk of data loss with a RAID (at least the type of RAID provided by the Apple Disk Utility). It's a speed VS reliability issue.
Simply daisychaining on a single FW bus will not increase the risk of data loss, but may slow down the overall drive read/write slightly.
G5/Dual 2GB/4.5GB RAM/FW800Storage/Decklink Mac OS X (10.4.3)

Usb3 errors on new mac mini (late 2014)

Hello to Everyone,
i have the following problem:
USB3 Devices does not work on my new MacMini (Late 2014).
I tried different USB3 Devices/Adapters with SSD/SATA Drives Connected and they are recognized by the system,
but when trying to access them, they just hang, or the MacMini reboots randomly when accessing usb3 devices !
This happens with Yosemita and Win8.1 either.
Connecting the SSD/SATA Drives with USB2 Adapters, works fine.
Connecting the same USB3 Adapters to another Computer with USB3 (like MacMini 2013) everything works fine, too.
Anyone has an idea or the same problem ?
Hopefully Apple releases an Bios update soon.
regards,
Stefan

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Does it happen in Safe Mode?
OS X: What is Safe Boot, Safe Mode?
\Next after it happens, start up the Mini and then open Console in the Utilities foler and look for USB related log entries and post them here.
You can also call Apple. You get 90 days of free telephone support
Complimentary Support (USA)

Lacie 2TB Big Disk Extreme Firewire 800 firewire 400 hi-speed usb2 7200 rpm sku 301201u knocked

I have a Lacie 2TB Big Disk Extreme + Firewire 800 firewire 400 hi-speed usb2 7200 rpm sku 301201u , which I have been using with an emac ( 1ghz power pc 4 , macos 10.5.8 ) for past few years.
A couple of days ago The drive was hit rather hard on side while on and up , the computer hung as the computer was up on a mac os 10.5.8 partition on this drive . Computer was rebooted and comes up on internal drive, lacie drive just made beep and click sounds ( i am actually deaf and this was what I was told ) every couple of seconds. Attempt was made to boot on CD to use latest available disk utility ( Macos 10.5). Lacie still does not show up. 15-20 minutes into this, I powered lacie down. This is when I started noticing a burned circuitry smell.I powered lacie down and disconnected it at this point.
Most Folks just suggest data recovery which can cost as much as $3000 or more which I really don't have .
I figured I open and examine the internalsof drive . I did so. The circuitry smells
like burned near the point where power comes in and the death diode is located, otherwise circuitry looks fine. One of the two drives , when taken out did not have a burnt smell and the other had a burnt smell towards the center but it dissipated in about an hour after it was taken out. There also was one loose screw inside drives chasing which ended up being one of the 4 screws that holds the disk drive's circuitry. I dont know but I don't think this could have shorted anything out but even though slim it is possible that such happened.
While I have Three DC voltmeters, I could not find the one that would accurately measure the voltage on the external power suppy to see if the output voltage on the 4 pins is accurate . I am still looking for the one meter that can do this.
I figured if I can find the exact drive in like new condition and swap the disks, if the disks are not damaged and if the culprit is actually burnt circuitry, then the drives should come up as they were as though nothing had happened.
I talked to a friend that suggested getting other cases and swapping disks but I guess that is not possible because the two disks are raided? ( raid 0 ) . I am also not even sure if the drives are raided the way they were put into use ( only through firewire 400) as the documentation suggests that only firewire 800 denotes use of built in raid0 but I am not sure. So again assumption is made that the drives are raided .
I contacted dealership of the drive which again suggest that Unfortunately it is not possible to obtain another drive like this one because it has been obsolete and out of manufacture for a long time. It is also a risky idea because if the problem is not with the drive enclosure hardware, there is a genuine risk of making the recovery process more difficult, or impossible.
This though does not follow logically. I have been able to see the exact drive with the same sku number offered as new or excellent condition more than 1/2 dozen times in the past few weeks so I guess drive can be acquired and tested before any such swap. If drives are not the culprit , I figure after a swap with a new enclosure and everything other than drives, the thing should not even be noticed and all should work as they did before the accident. If the drives are the cause , then the thing has been on 1/2 hour after the accident so the swap should not do any more damage or cause future recovery attempts any more issues than already might be there.
Any sound advice is greatly appreciated.

I tried the two good disks in the main chasis with new cables and power supply , and I could not get them to come on or show.
I put the good disks back in the second chasis with new cable and power suppy and it again shows ( prompts telling you that it sees a readable MAc OS disk and asks if you want to Initialize it ).
I put the first set together again with new cable and power supply and the light does not come on anymore . being hearing impaired , i put my head on the drive and hear this clicking sound every one or two seconds. The fan operates . The drive does not show when rebooting and it does not show on the disk utility. The drive does not smoke but smell of burned mica ( circuitry ) is still in my throat after a couple of hours.
From what I have learned the possibility exists that each drive is calibrated and the calibration is added to the control board , So like chances are that even if the two original drives are good and connected properly and everything else is good, they might and probably just wont work with a control board of another even exact drive. There are three tables / charts marked on each drive and specific locations marked on each chart which differ between drives . These I think are from calibrating the drives.
So I guess its data recovery...
Lacie Data Recovery wants $600 ( $300 x 2 drives ) if they recover data without need for a clean room , $3000 ( $1500 x 2 drives ) if there is need for clean room. If they don't recover , you dont pay , if they recover and you do not want to pay, then they just send you the damaged disk ( or perhaps keep it , or smash it then return it to you) .
There are many other data recovery services so I guess a few days to sift through them but I guess the maker reference should be the best way ( I think its actually a sub-company that lacie forwards data recovery to.
Too many factors are involved. One that will such be a secure thing to do or 6 months later you find out that someone opened 10 accounts under your name , or emptied your bank account ( thats actually not a problem because there is almost never any money in my bank account) . So security is a concern. I have encountered individuals that make it their business stealing peoples stuff from their disks. Once I even had one Tech guy which was refered to solve a problem I had , copying disks contents right in front of me for absolutely no reason. So I ask him what are you doing, and he says , I am copying everything just to make sure they are safe ( : ) )
Then there is the dalai lama , everything happens for a reason scenario. In which case I guess I have to consider the whole thing as Good Omen. and just forget about it and go on with my life ( maybe I go work in Mc Donalds : ) )
The bottom line is I can't believe that I am such an idiot not to have a proper backup system in place .
Thank you for the links, I will check them out.

LaCie d2 Big Disk Extreme - failure

I think there is a serious problem with the FireWire communication between MacPro and the Lacie d2 Big Disk Extreme: I just moved to this machine, and I'm experiencing a ridiculous number of bus resets. See this from system log:
Jul 4 07:28:55 computer-di-lol-productions kernel[0]: FireWire (OHCI) TI ID 8025 built-in: 5630 bus resets in last minute.
The disk usually mounts properly, then after a while and randomly slows down to almost a halt. Very scary. This happens on two identical drives, which work perfectly if I connect them through USB. Also, this happens both in FW800 and FW400. LaCie recently released an update for such disks which is available from their website, but my drives are apparently updated. I can't move up to 10.4.10 at the moment because I am using ProTools which is not officially supported yet.
Any hints and thoughts are greatly appreciated!
Marco Olivotto
2 x 2.66 GHz Dual-Core Intel Xeon Mac OS X (10.4.9) Final Cut Pro 5.1.2 (suite)

Sorry for the late reply as I wasn't checking the posts. When I bought my 1TB I laready had number of other LaCie stuff, Cd writer, 500Gb and 250 Gb and a DVD writer. As I was passing the the 250 drive to my son I gave him the 1TB power supply so that I did not distrubed the cable arrangment, so I am guessing that I was using the power supply from one of the CD writers.
I really don't know how it affects it, but I am guessing that it just don't have enough beef to feed the drive or the interface. I did a internet search and I seen as a suggestion, I implemented and it worked. As I said all the disk utility software gave the drive clean bill of health, despite occasionally saying could not complete the instructions because of hardware error.
Ona different note this kind of thing happened to me before with my Canon 20D digital camera, two batteries died on me very quickly and charged very erratically , and when I bought my Canon 5D the new charger just charged them properly, so it was the charger that gone wrong but seemingly still functioning to a degree.
But if your drive is brand new with a brand new power supply, and checked your disk with some kind of utility software maybe it is your drive. I am guessing that you formated the drive when you bought it.

Lacie 500GB Big Disk Extreme problem.

I have a Lacie 500GB Big Disk Extreme (Triple Interface), that the Airport Extreme (n) is not mounting.
It's formatted as Mac OS Journalled, and works perfectly if connected directly to my MacBook Pro by USB or Firewire.
When connected to the AE(n), I get the following error message:
"Your AirPort base station is reporting the following errors:
Disk needs repair
Errors were found with a disk connected to your AirPort Base Station. Please connect the USB disk to your Mac or PC and use Disk Utility or another application to repair the disk."
I connected the drive to my MBP and ran Disk Utility, which reported no problems with the drive at all. After repeated attempts, with various cables, I updated the firmware on the drive to see if that would solve the problem. It didn't.
Anyone else having problems with their Lacie drives, especially those of you with the Big Disk Extremes?

Am trying to get my Lacie 300GB Big Disk triple interface to work with my (new) Airport Extreme - however it just doesn't recognise it through the USB port.
Problem A - my macbook works fine with the lacie through FireWire cables (which is what i've always used), but the disks don't mount when its plugged in through the USB.
Problem B - would the Hard Drive work on Airport Extreme if I had a powered hub (with firewire ports) plugged into the USB, and then link up the Lacie through the firewire?
cheers

There is no display on Apple Thunderbolt display, when Daisy chain connect with six LaCie Little Big Disks.

Hi, Everyone,
I have aquestion with Thunderbolt daisy chan.
I have six LaCie Little Big Disks and Apple Thunderbolt Display to make daisy chan and I got a problem.
I place the Apple Thunderbolt Display at the end of the chain, and six LaCie Little Big Disks infront, and Apple Thunderbolt Display does not show anything.
If I plac the dell u2711 (DP1.1) Display at the end of the chain, and six LaCie Little Big Disks infront , dell u2711(DP1.1) displays.
If I place the Apple Thunderbolt Display at the end of the chain,and five LaCie Little Big Disks infront. Apple Thunderbolt Displays well.
Is it because the hardware limitation that Thunderbolt daisy chan can only have maximum 6 Thunderbolt deivce?
Apple Thunderbolt Display Should be DP1.2, why it doesn’t display?
My workstation running Windows 7x64 or Windows8.1x64
Thanks ,Myron

if you reduce the number of disks to 5 and the display works, I think we'll have your answer.

LaCie Ethernet Big Disk | USB Slow

Hi,
I'm using a LaCie Ethernet Big Disk (1TB) as a backup HD to my iMac. While both the HD and Mac support USB 2.0, the data is flowing at a 3.46 MB/s. I thought USB 2.0 ought, in theory at least, to run at 60MB/s.
The connection is via an Ethernet Adaptor, is says that it's Media Subtype (from the Sytem Profiler) is 10baseT/UTP. Is this the problem? Shouldn't this say somthing along the lines of 1000 baseT? Any ideas?
Thanks.

Hi Frando-
That 10base clue is part of it. Is there a switch or router between the drive and your Mac that is operating at 10? Make sure to check your cabling as often a bad cable or connection can cause a slower connect speed.
If you are accessing this drive over the network than the USB speed doesn't matter as that is not how the drive is transferring data.
Luck-
-DaddyPaycheck

LaCie 1TB Big Disk not mounting as a shared device

Hi!
Today, I purchased a brand new AirPort Extreme 802.11n to replace my now dead NetGear WGR614. The set-up went well, but I have a query.
I also own a LaCie 1TB Big Disk connected to the AEBS via ethernet as a NAS Drive. The disk itself is set-up with Apple File Server and Bonjour Services enabled. With my NetGear WGR614, the hard drive would automatically appear in the Shared Devices column in Finder. The only way I have been able to achieve this same outcome is to log into the drive using Command-K and then adding it to the Login Items in the Accounts Preference Pane. This is so it will automatically appear connected in the Shared Devices column after a restart.
I have spent the morning searching many and varied forums for a solution, but almost all entries deal with USB connected drives.
If anyone has some information they would like to share, it would be greatly appreciated.
Many thanks in advance.
Rodger.

Solved on the MacTalk.com.au forums.
http://forums.mactalk.com.au/33/50669-lacie-1tb-big-disk-not-mounting-shared-dev ice.html
Thanks to all who viewed this post.
Rodger

Hi I am getting below error on my MAC OSX 10.6 Server

Hi,
I am getting below error on my MAC OSX 10.6 server MAC Pro machine.
Please let me know what this means?
Interval Since Last Panic Report: 8518861 sec
Panics Since Last Report:          1
Anonymous UUID: F1F85B83-6DC2-4E6C-B02C-D1D42F15F321
Wed Jan 25 16:22:19 2012
panic(cpu 3 caller 0x2abf6a): Kernel trap at 0x00926b00, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000054, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x080a7600, ECX: 0x00000000, EDX: 0x098da5a4
CR2: 0x00000054, EBP: 0x56e8be78, ESI: 0x098da500, EDI: 0x080cf800
EFL: 0x00010202, EIP: 0x00926b00, CS: 0x00000008, DS: 0x080c0010
Error code: 0x00000002
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x56e8bc88 : 0x21b837 (0x5dd7fc 0x56e8bcbc 0x223ce1 0x0)
0x56e8bcd8 : 0x2abf6a (0x59e3d0 0x926b00 0xe 0x59e59a)
0x56e8bdb8 : 0x2a1a78 (0x56e8bdd0 0xcc5c600 0x56e8be78 0x926b00)
0x56e8bdc8 : 0x926b00 (0xe 0x98d0048 0x56e80010 0x530010)
0x56e8be78 : 0x927ff8 (0x98da500 0x80a7600 0x5000 0x0)
0x56e8bec8 : 0x98b7aa (0x98da500 0x80cf800 0x2 0x0)
0x56e8bf08 : 0x98e014 (0x8086c00 0x8087f9c 0x0 0x807d580)
0x56e8bf28 : 0x552ea6 (0x8087c00 0x0 0x0 0x4fbef7e4)
0x56e8bf88 : 0x552eea (0x8087f80 0x8087f80 0x0 0x1)
0x56e8bfc8 : 0x2a179c (0x8087f80 0x0 0x2a17ab 0x7e0d564)
      Kernel Extensions in backtrace (with dependencies):
com.ATTO.driver.ATTOCelerityFC(3.4.6)@0x943000->0x99afff
            dependency: com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x92c000
com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000->0x92bfff
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.8)@0x909000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
System uptime in nanoseconds: 1825402534727490
unloaded kexts:
com.apple.iokit.IOUSBMassStorageClass   2.6.7 (addr 0x1284000, size 0x49152) - last unloaded 1132024965088576
loaded kexts:
com.ATTO.driver.ATTOCelerityFC       3.4.6
com.apple.filesystems.smbfs       1.6.7 - last loaded 267231229373759
com.apple.filesystems.afpfs         9.7.1
com.apple.nke.asp_tcp       5.0
com.apple.driver.AppleHWSensor       1.9.3d0
com.apple.filesystems.autofs       2.1.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleHDA        2.0.5f14
com.apple.driver.AudioAUUC     1.57
com.apple.GeForce   6.3.6
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AudioIPCDriver         1.1.6
com.apple.driver.AppleMCEDriver       1.1.9
com.apple.driver.AppleIntelMeromProfile     19
com.apple.driver.ACPI_SMC_PlatformPlugin       4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.iokit.SCSITaskUserClient   2.6.8
com.apple.BootCache        31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA     2.5.1
com.apple.driver.AppleEFINVRAM      1.4.0
com.apple.driver.AppleUSBEHCI         4.2.4
com.apple.driver.AppleUSBUHCI         4.2.0
com.apple.driver.AppleACPIButtons    1.3.6
com.apple.driver.AppleRTC         1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC       1.4
com.apple.driver.AppleIntelCPUPowerManagementClient     142.6.0
com.apple.security.sandbox         1
com.apple.security.quarantine     0
com.apple.nke.applicationfirewall         2.1.14
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction         17
com.apple.driver.DspFuncLib      2.0.5f14
com.apple.driver.AppleProfileTimestampAction   10
com.apple.driver.AppleProfileThreadInfoAction    14
com.apple.driver.AppleProfileRegisterStateAction        10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction       20
com.apple.nvidia.nv40hal    6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOFireWireIP       2.0.3
com.apple.iokit.IOSurface   74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily    10.0.3
com.apple.iokit.IOAudioFamily    1.8.3fc2
com.apple.kext.OSvKernDSPLib         1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOGraphicsFamily        2.2.1
com.apple.iokit.IOHDAFamily      2.0.5f14
com.apple.iokit.AppleProfileFamily      41
com.apple.driver.AppleSMC        3.1.0d5
com.apple.driver.IOPlatformPluginFamily     4.7.0a1
com.apple.driver.AppleUSBHIDMouse         162
com.apple.driver.AppleHIDMouse        162
com.apple.driver.AppleUSBHIDKeyboard    141.5
com.apple.driver.AppleHIDKeyboard   141.5
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.AppleUSBMergeNub         4.2.4
com.apple.driver.AppleUSBComposite        3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice   2.6.8
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily    1.6.1
com.apple.driver.XsanFilter         402.1
com.apple.iokit.IONetworkingFamily    1.10
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOFireWireFamily        4.2.6
com.apple.iokit.IOUSBUserClient         4.2.4
com.apple.iokit.IOSCSIParallelFamily 2.1.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOAHCIFamily     2.0.6
com.apple.iokit.IOATAFamily      2.5.1
com.apple.iokit.IOUSBFamily      4.2.4
com.apple.driver.AppleEFIRuntime      1.4.0
com.apple.iokit.IOHIDFamily        1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch         1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages      289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily        2.6.5
com.apple.iokit.IOACPIFamily     1.3.0
Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 4 GB, SMC 1.7f10
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 32768 MB
Memory Module: global_name
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,0
PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,1
Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
Parallel ATA Device: PIONEER DVD-RW DVR-111D
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 1
Fibre Channel Device: SCSI Target Device @ 2
USB Device: Hub, 0x05ac (Apple Inc.), 0x9130, 0xfd500000 / 3
USB Device: Apple Cinema Display, 0x05ac (Apple Inc.), 0x9222, 0xfd520000 / 4
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000 / 6
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd120000 / 5
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown

Any news from ATTO? newer driver?
did it just start but began after "xyz"?
Have you run Apple Hardware Test?
Take out the ATTO card and / or boot in Safe Mode and things are fine?
And while the Nvidia 7300GT hasn't yet failed, might want to look into a replacement for it, too.
OS X Snow Leopard Server Community:
https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_ser ver_v10.6_snow_leopard

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3.
The application was restored from a backup using Apple Time Machine.
I would reinstall the applications, since I have the original disks, but alas, the Mac Mini has no external drive.
Any ideas?

CS4 is untested and unsupported under 10.9.x
That said, you should uninstall everything run the cleaner tool and then download the CS4 installer and try it again.
If that doesn’t do it, you’re on your own.
Cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Download link for CS4: http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

New Mac Mini won't open DVD Player, I get an error

This is a brand new mac mini (latest model bought two days ago), just opened and tried to open DVD player without any media on the DVD drive and the DVD Player doesn't open and I get this error:
There was an initialization error.
A valid video device could not be found for playback (-70017)
What could that be?
Wilfredo.

No. The DVD Player always open even if there is no media in the drive.
The problem was the Region. I needed to set the region on the drive, but the error message never told what was the problem, I had to figure it out myself.
Wilfredo.
Message was edited by: Wilfredo Nanita

TS1717 When trying to open itunes I get an error message "New iTunes Library". any suggestions?

i can't open itunes. i get an error message: New iTunes Library. Anyone else encounter this?

I have Windows 7. I went into control panel and selected 'programs' and then 'programs and features'. Then I highlighted the iTunes program in the list and then selected 'repair'. It then configured iTunes. I then restarted my computer and it was okay.

How to solve: The backup disk image "/Volumes/Data/IP's Mac mini.sparsebundle" could not be accessed (error -1).

Hi,
Please help!
I set up my time capsule yesterday, and it worked perfectly initially. However, after I used the same time capsule HDD as network file sharing with my MacBook Pro and two other PCs, than the hourly backup failed and gave the following error message.
The backup disk image “/Volumes/Data/IP’s Mac mini.sparsebundle” could not be accessed (error -1).
Please help telling me what to do to restore the backup function.
ipmt

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

HT3275 The backup disk image "/Volumes/Data/JIP's Mac mini (2).sparsebundle" is already in use.

I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?

Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.

LaCie 500g Big Disk getting hardware error on new Mac Mini

Similar Messages

Maybe you are looking for