Lacie and Maxtor compatiblity

Lacie d2 and Maxtor onetouch firewire drives. Are they compatible with iMac duocore?

I use the LaCie D2 160gb I was previously using with my PowerMac dual 2.5 (which I sold before getting the iMac), and it works very well with the iMac. absolutely no issues. I did have to figure out the GUID partition scheme switch in Disk Utility in order to have a small bootable partition for the iMac. While's it's not the same FW800 speed I was getting on the PowerMac, I'm very pleased with it.

Similar Messages

  • Compatability between LaCie and other drives

    Greetings Kind MacAddicts!
    I have a 160GB LaCie (Triple Threat?) FW800 external drive and have had no problems. Now I want to expand and daisychain another external drive. Thinking of a Maxtor with FW800 (more bang for the buck) and wondering if there are any known compatability issues between LaCie and Maxtor, or btw Maxtor and the new Intel processors. Suggestions?

    Well that drive inside the LaCie casing could very well be a Maxtor drive too :P
    Remember LaCie don't actually make Hard Drives, they just put drives from other manufacturers in their external casings and charge a premium.
    Yes, some of their designs look nice

  • Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

    need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Is Lync 2013 and Office 2010 Home and business compatible?

    hi,
    Is Lync 2013 and Office 2010 Home and business compatible?
    tnx

    Lync 2013 and office 2010 is compatible with limited features
    The following features are available only with Office 2010 or Office 2013:
    Contact card with expanded options, such as video call and desktop sharing
    Quick search from the Find a Contact field in Outlook
    Reply with an IM or call from the Outlook Home ribbon in the Mail, Calendar, Contacts, and Tasks folders
    Lync Contacts list in Outlook To-Do Bar
    Office Backstage (File tab) presence status, program sharing, and file transfer
    Presence menu in Microsoft Office SharePoint Workspace 2010 (formerly Microsoft Office Groove 2007)
    Presence menu extensibility
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg412817.aspx
    For your issue, verify from lync version {for example , if your office 64 bit, Lync must be 64 bit also}
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • If i use a usb flash drive which is both os and windows compatible can i transfer files from my mac to a windows pc using the same usb flash drive?

    if i use a usb flash drive which is mac os and windows compatible can i use it to copy files from the mac to a windows machine. i have to do some training abroad and wnat to take the files on a usb from the mac but they will only have a windows operating system available to me.

    Generally, it's not the flash drive that makes it compatible, but the formatting used on it.  In Disk Utility on a Mac, the format is called MS-DOS (FAT).  In Windows, I believe it is called FAT32.
    A USB flash drive formatted that way should be readable and writable on both Mac OS X and Windows.  But you may want to try a "trial run" before relying on it for the trip.

  • HT1766 I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved

    I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved. Can anyone help?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Is the Microsoft 5MH-00001 Wired Desktop 400 keyboard and mouse compatible with mac mini?

    Hello, is the Microsoft 5MH-00001 Wired Desktop 400 for Business mouse and keyboard compatible with the mac mini computer? I tried using a generic mouse and the lights of the mouse were on, but I could not click or move the mouse around. Then when I plugged in a dell keyboard, it said the "keyboard is not identified". I could press buttons on the keyboard, but they werent being registered by the mac. I also tried changing my mouse's usb to a different port, but still did not work. So I am worried that the microsoft wired mouse + keyboard I ordered might not work on my mac mini. Is there a way to get my old keyboard and mouse to work at least?

    Were these other ones you tried Wired also? If so that's really strange!?
    Did you try rebooting with them connected?
    I see no reason for the Microsoft 5MH-00001 Wired Desktop 400 for Business to not work, but then any wired Generic KB should work!???

  • K7T266 Pro and Maxtor hd

    Could someone please tell me if there are problems between my K7T266 Pro and Maxtor Diamond Max Plus 9 (6Y160P0)?
    Thanks 4 answer

    There should be no problem.

  • How to make uiactionsheet and uidatepickerview compatible both ios 7 and ios 8 ?

    how to make uiactionsheet and uidatepickerview compatible both ios 7 and ios 8 ?

    I do not know actually why there is no option "dock transparency". That is strange that Apple is proudly speaking about Retina display and now covers it by such big and untransparent stripe of something. I also like the display and I am strongly dissapointed seening it painted in such blurred colors. And I do not care about algorithms that are behind it and how complicated there are. It is not working for me and happy to see for most of the community. That definitively is not a dock. I would like to make it full transparent this would be more iOS7 light style. At the dock there are icons which stay all the time at the same place, why do we need something to emphasize their meaning?

  • Are Photoshop CS5 and CS6 compatible with Windows 8

    Are Photoshop CS5 and CS6 compatible with Windows 8?

    Yes,  I'm running CS6 on 8.1, and I'm sure CS5 works as well.

  • HT201263 Hi All, My iphone Model A1387 EMC 2430 FCC ID:BCG-E2430A IC:579C-E2430A and i am unable to activate my iPhone shows SIM Not Valid and Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card th

    Hi, My iphone Model A1387 EMC 2430 FCC ID:BCG-E2430A IC:579C-E2430A and i am unable to activate my iPhone shows SIM Not Valid and Only compatible SIM cards from a supported carrier may be used to activate iPhone.or visit a supported career 's store to receive a replacement sim card.
    how can i solve this?? please let me know.
    thank you.

    Sounds like the iPhone is locked to the original Carrier
    and you are trying to use  a sim from another carrier
    and only that original  carrier can unlock the iPhone

  • Is Photoshop elements 6 and 8 compatible with Mac OSX 10.10 Yosemite

    Is Photoshop 6 and 8 compatible with Mac OSX 10.10 Yosemite

    I've been running both without problems, but haven't used them that extensively. So far there haven't been any reports of major problems here.

  • Is gtx770 and gtx780 compatible with 5.5 adobe master collection?

    Is gtx770 and gtx780 compatible with 5.5 adobe master collection?

    This is because the last released update for CS5.5 came out before the introduction of the GeForce 600-series GPUs. And Adobe usually tends to completely cease updating older software (CS6 is currently one of the few exceptions - and only for critical bug fixes, not to add new support) once the newer version is released. No driver version for the newer GeForce GPUs will ever fix or change that.
    So, basically, your CS5.5 is considered "EOL" (End Of Life), in the eyes of Adobe, once CS6 came out in May 2012.
    On the other hand, you can force MPE GPU acceleration to be enabled by default in CS5.5 or CS6 by simply deleting or renaming the "cuda_supported_cards.txt" file. Do not simply blank out the contents of the "cuda_supported_cards.txt" file without actually deleting the file; otherwise, the exact opposite would occur: Premiere would become locked to the MPE software-only mode even with a GPU that's officially supported for MPE GPU acceleration in Premiere.

  • Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    I have an iPod Touch 2 with iOS 4.2.1.  This is the highest version that works on this device.  I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
    Apple does make it harder than it needs to be.  There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
    App backups are your friend since iTunes has no way to keep older version of apps.

  • Is there an Apple Monitor that is Macbook and PC compatible? Perhaps with an adapter?

    Is there an Apple Monitor that is Macbook and PC compatible? Perhaps with an adapter?

    What model is your apple airport? A1xxx from the base please.
    Is the computer running Mavericks as per your profile?
    Time Machine has logs you can access.
    This might give you some idea of what is wrong.. but I have to say if you run Yosemite.. therein lies your problem.
    See A1 here.
    http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for