Lacie d2 external?

I have a Lacie d2 external hard drive. I'm trying to find some sort of "settings" option for this in order to change from automatic backup to manual backup.
ANYONE HAVE ANY IDEAS? I went to Lacie.com and couldn't find much.

Hi Jeff,
If you're using LaCie's Silverkeeper software, open the app (in MacintoshHD > Applications), select the Schedule tab, and uncheck the boxes. Then it will only run manually.

Similar Messages

LaCie 120Gb external hard drive no longer recognized

I've had a LaCie 120Gb external hard drive working independently off a firewire cable for a couple of months now. This morning it stopped being picked up as an external drive. It connects because you can feel it whirring, and stops when the computer is turned off (so the cables are working), but it no longer shows up in the finder or disk utility. I tried resetting the PRAM to no effect. Any ideas anyone???
Dave Nicholls, Auckland.

it spins because it has power. maybe your firewire port is damaged? does the drive have a usb port that you can try? if not, you can remove the hard drive from it's enclosure and install it in a tower mac or pc if you have one and see if it shows up then.

LaCie 1TB external hard drive can not connect to E4200

I have my LaCie 1TB external hard drive plugged into the USB-port of the Linksys E4200 so I can access that drive wireless.
However, in my disk management (via Cisco Connect), it does not show under Storage > Disk.
How can I solve this so I can access this hard drive from any computer in the network?
The drive is formatted in NTFS.
Thanks

Connect the hard drive directly to the computer and make sure that your computer can detect the hard drive.
If it is detected and working properly on your computer then connect the hard drive the USB port on the router.
Follow this link to setup storage device connected to E3000 router.

10.4.5 Update Causing Error -36 with LaCie Firewire External Hard drives

I have two LaCie Firewire external drives, one for extra storage and one for backups. Since the 10.4.5 update, I've been unable to copy files consistently from my external drives to my hard drive or other external drives. The disks mount, and run like normal - I have my iTunes library on one drive, and all the tracks play normally. I am able to copy very small files, but anything over a couple mb gives me an error -36. I've run disk utilities etc on the external drives and they appear to be just fine. In order to see if it's an OS problem, I hooked the external drives (in a daisy chain) to my girlfriend's ibook. She's running Jaguar still, and had no problems. So it appears that it's an OS upgrade problem. One note, I didn't disconnect the drives when I ran the upgrade, but then, I never have for upgrades, only full OS installs. Is anyone else having this problem and know of any fixes?

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

Lacie Rugged external drive will not show up after Yosemite update.

Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.

I have the exact same issue. Have you had any luck with a solution?

Lacie D2 External Drive Icon

Hello,
Having bought a new Lacie D2 external drive, I decided to re-format it. All is fine except that I didn't have the foresight to save the icon, and now the mounted drives have the generic FireWire drive icon.
I'd very much like to get the Lacie icon back, so can anyone can tell me where I can find the icon file, or even supply one? I have tried the install disk, Lacie online support, and these posts with no success.
Fingers crossed!

Yes, I can tell you where you can find it.
Go to http://www.lacie.com/products/images/ and choose 'Icons and Wallpapers' from the popup menu.
Download the .dmg file with the icons you need.

Lacie d2 external hard drive

connected lacie d2 external hard drive triple extreme to mini. Does not show on desktop. Does not show name in system profiler but recognizes a firewire attachment. Do not know what to do next.

Disconnect the drive, then reset the mini's PMU. Once done, reconnect the drive and switch it on.
If that doesn't work, check the connecting cable to make sure it's not damaged, and replace it if there is any doubt.
To reset the PMU:
- Unplug all cables from the computer, including the power cord.
- Wait 10 seconds.
- Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
- Let go of the power button.
- Press the power button once more to start up your Mac mini.

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

Lacie 1TB external HDD recently stopped doing Time Machine backups. Disk Utility recommends that the disk needs to be repaired.

I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
It recently stopped doing the backups, so I checked Disk Utility and it recommended that I repair the disk. How long does it take for Disk Utility to repair a 1TB external HDD?
Other things to consider:
- Cant find the disk in the Finder, I used to be able to do that before.
- When I tried to go a Time Machine backup, it said the disk was not available.
Upon using disk utiliy, I successfully verified the disk. Then I initiated the disk repair process.
The current status:
- checking file system
- Volume repair complete
- Updating boot support partitions for the volume as required.
The progress bar says "Verify and Repair volume "LaCie"" - the progress bar does not indicate how much has been done or how long it will take.
Capacity: 1 TB (1,000,204,476,416 Bytes)
Mount Point: Not Mounted
Format: Mac OS Extended (Journaled)
All other status fields blank.
Any one know how long it will take for Disk Utility to repair the external HDD? Any other ideas as to how I can get the Lacie HDD to reconnect with the Macbook and resume normal operations? i.e. Time Machine backups, accessing contents through the Finder.

purduegrad_macguy wrote:
I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
Mine Failed after 3 years and 4 months of using it as a Dedicated TM Backup drive...
When I used Disk Utility for repairs... it went from 7 minutes to 4 hours and after about 10 minutes it was saying 40 hours...
So I just replace it with a New EHD...

Trouble with Lacie 1TB external hard disk

Recently got a Lacie 1TB external hard disk. Need to get as close to 1TB actual capacity as I can.
Used cfdisk to create a single Linux partition, and thought I tried to "maximize" the size.
Used mkfs -t ext3 /dev/sdb1 to create the file system.
Tried to mount the disk. The first go around apparently failed (dmesg said there was no journal).
I repeated all of the above and the second time it mounted, but "df -h" reports:
/dev/sdb1 925G 200M 878G 1% /mnt/external_1
What the hell happened?
Can someone please advise on how to fix this, and actually maximize the real available space? Please include the exact utilities and flags you would recommend.
thanks much.

lucke,
i know disks always have less capacity than the nominal size. but a 1TB disk should have more than 900 MB available. possibly as much as 980 MB. that would be commensurate with my past experience using other external drives. over 200 GB used off the bat is ridiculous, and i've never seen anything like that before.
as a revised question to people out there, which fs would you recommend to get the most out of this disk. it's going to have 900+ GB of files, each almost exactly 170 MB, and will be processed via the USB2 interface.

Lacie 1TB External HDD just went ghost

I was using my computer this afternoon and ejected my harddrives to take the MBP to another room. When I mounted everything back, my Lacie 1TB USB 3.0 HDD just didn't mount. I have 2x of the same HDD and a WD 2TB. All of them are Mac Journaled, one Lacie is configured as Time Capsule and the other is just backup for music, FCP files, etc.
I've switched USB ports, USB Cables, everything. It doesnt show up on Disk Utility either.
It always asked to Force Eject as Spotlight was forever indexing this HD.
Any thoughts?

purduegrad_macguy wrote:
I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
Mine Failed after 3 years and 4 months of using it as a Dedicated TM Backup drive...
When I used Disk Utility for repairs... it went from 7 minutes to 4 hours and after about 10 minutes it was saying 40 hours...
So I just replace it with a New EHD...

Lacie Portable External Hardrive- a wise purchase?

I am considering buying this external dvd burner. Can anyone give me a recomendation for this product. Is it a good purchase and easy to use with my macbook?
Thanks

Hiya
I bought the Lacie D2 external just over 3 years ago. Burned well over 300 DVD movies / disks and its travelled in my bag a few times across the Atlantic.
I use it on my iBook G4 when travelling and at home on the iMac instead of the built in unit.
No problems ever... so far... touchwood...

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room.

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room. I have very little room left on the hard drive and need to move an iPhoto library.

i have a lacie, and i encrypted it. i had to wipe it, because it kept dropping off over and over and re-logging in. so unencrypted i went.
at some point it wasn't recognized at all. sometimes disk utility would open it, but then it got to the point that it wouldn't recognize it either.
i hadn't realized that the power supply was dysfunctional. but i was able to recover it using disk warrior at the last deep breath it took. the disk itself still works, but not in that housing.

Lacie 250GB External Hard Drive NOT RECOGNIZED

HELP! My Lacie External HD that I've had for several years and holds a lot of my files is no longer being recognized on my MacBOok Pro. It used to recognize it instantly when I plugged the USB cable to the USB Port - now, nothing. The Lacie light is on, but my laptop isn't reading it at all. What's going on??? I did a disk utility - it's not showing up there at all either. Is it due to a software update? Don't get me started on losing out on using my entire Dreamweaver/Flash Studio MX 2004...
ALSO, I notice my iPhone is not being recognized in iPhoto anymore either. It is recognized in iTunes. And yes i've heard many folks say email photos should be removed, which i have done so and still nothing!
HELP PLEASE!!!

Are other USB devices working normally, Eric?
If so, the most likely cause is that either the bridge or the drive itself in your external enclosure has failed (assuming you have tried a different cable)
No, it is most unlikely to be due to a software update. With an old external drive like yours the most likely explanation is that it has simply failed. If it is the bridge, rather than the hard drive itself, that has died you may be able to remove the HD from the LaCie enclosure, put it in a different enclosure, and recover your stuff. In some cases, too, a drive light will illuminate when the drive is connected to the computer, even if the power supply to the drive itself is faulty. You might want to contact LaCie to see if they have any advice to offer about such situations.
Have you tried the drive on another Mac or another drive on this Mac? THis would immediately narrow down the location of the problem, of course.
Cheers
Rod
Message was edited by: Rod Hagen

I'm attemping to back up my system, entire computer, hard drive w/ LaCie 500gb external drive.

I am attempting to back up my entire computer w/ an LaCie external drive. I don't have "airport", so I guess time machine will not apply, ? work. ? I am theathered w/ firewire 800. I have formated the disk, and need to know how to copy - back up the entire system, hard drive, ? I tried to click and drop it, but...
How do I accomplish this task. I want to have a back up of everything in case, (God Forbid), it happen's. And I have to turn my computer, and Iphone over to a frenesic firm to establish my surfing record. I could use any advice you have there as well. I tried the Apple store, but they just do repairs.
Thanks, Blessings, Bob

You certainly can use Time Machine. Firewire 800 is a great way to go.
You just have to activate Time Machine from System Preferences and tell it to use that LaCIe disk.
Mac 101: Time Machine
charlie

Lacie d2 external?

Similar Messages

Maybe you are looking for