LaCie d2 will not mount in 10.4.7

So I've restored to Backup and 10.4.6 - all seems OK again.
Has anyone experienced the same?
Sort it out apple...

Welcome to Apple Discussions!
Check http://www.lacie.com/ for firmware updates.
Also check if your Firewire bus needs resetting:
http://docs.info.apple.com/article.html?artnum=88338
Or the PRAM needs resetting:
http://docs.info.apple.com/article.html?artnum=2238

Similar Messages

Lacie HD will not mount to Macbook Air...

Ok, I have a Lacie Rugged 1TB HD. My 24'' iMac (running Snow Leopard) reads it fine. But my new Macbook Air (running Mountain Lion) does not recognize it. The HD does not show up in Disk Utility on the Air either. I have taken all the date from the HD and backed it up on a separate external HD. After that, I erased the Lacie and reformated it to the "Mac OS Extended" and the Macbook Air still will not mount to the Lacie external.
Is there anything I can do to get the Macbook Air to mount to the Lacie HD? Any advice would be greatly appreciated. Thanks in advance.

Have you used other external drives on the air before? Are you using thunderbolt or USB? If you bought your air from apple you should take it in to a store and have them check the ports. You could run an extended hardware test, although I'm not sure if that would check the ports working ability.

HDs WILL NOT MOUNT AT ALL.

Ok my Lacie HDs will not mount at all anymore through my fire wire 400 ports. i have been back and forth with Apple and Lacie with this issue for months and nobody can find the issue. Heres the deal. When I bring my HDs to the Apple store and they plug them in to another computer they mount just fine. So I brought my whole system into the Apple store and ofcourse my HDs would not mount on my computer. So they tried to mount the HDs they had and they worked just fine. Mounting on USB works just fine also. So Apple tested my firewire ports and according to Apple my firewire ports are operating fine. But something is not operating fine. The tech at Apple told me that since I have 2 Lacie HDs plugged in on the same firewire bus its possible that my Mac (G4) can not tell the difference between the 2 drives and that would make them not mount at all. He also thought it would be a good idea for me to get a firewire card so my drives would be seperated and they can work on completely on 2 different busses. I have tried everything you could think of to try and get these drives to mount. I have tried to mount them one at a time, I have tried different power supplies, and firewire cords, nothing is working. Help me out..

Open up those LaZee drives and remove the HDs.
Then you can get one of these remounting kits (or anything similar and compatible):
http://eshop.macsales.com/shop/hard-drives/Cables-Mounting-Kits/
X

HARD DRIVES WILL NOT MOUNT AT ALL

Ok my Lacie HDs will not mount at all anymore through my fire wire 400 ports. i have been back and forth with Apple and Lacie with this issue for months and nobody can find the issue. Heres the deal. When I bring my HDs to the Apple store and they plug them in to another computer they mount just fine. So I brought my whole system into the Apple store and ofcourse my HDs would not mount on my computer. So they tried to mount the HDs they had and they worked just fine. Mounting on USB works just fine also. So Apple tested my firewire ports and according to Apple my firewire ports are operating fine. But something is not operating fine. The tech at Apple told me that since I have 2 Lacie HDs plugged in on the same firewire bus its possible that my Mac (G4) can not tell the difference between the 2 drives and that would make them not mount at all. He also thought it would be a good idea for me to get a firewire card so my drives would be seperated and they can work on completely on 2 different busses. I have tried everything you could think of to try and get these drives to mount. I have tried to mount them one at a time, I have tried different power supplies, and firewire cords, nothing is working. Help me out..

Philip,
I have had trouble with USB lacie drives in the past. Some people swear by them, but I personally avoid them as well as maxtor.
sounds like you're stuck with them since they are that old. I would pursue something with Lacie. If every other hdd connects fine - except them, and Apple has tested the ports = seems like a problem with the drives. I'd get the data off them and see if you can't get lacie to help out.
not a solution - good luck!
rob

After upgrading to Mountain Lion, my LaCie USB 3 drive will not mount

I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?

mrfredmor_65 wrote:
I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
It's my understanding that LaCie hasn't released a Mountain Lion driver for their PCIe card yet. Sonnet uses a modified version of the LaCie driver and theirs is dead in the water too for that reason-they also warn that their driver won't work with 10.7.5 when it's released.
Indeed, yesterday I pulled the Sonnet USB 3.0 card from my Mac Pro and replaced it with a CalDigit card from OWC; CalDigit has separate drivers for 10.6, 10.7 and 10.8 and I can say that the card works with all three, the first time in 1.5 years that I've had a reliable USB 3.0 connection.

I have a lacie drive attached to my airport but it will not mount

I have an Aiport Extreme and I just purchased a Lacie 2d Quadra drive to attach to it. However, it will not mount. I have tried to power it off and on, replaced the USB cable but it will not wake up. The blue light will flicker for a moment then go dark. I have a new MacBook Pro but I cannot connect to it. Any ideas? Thanks.

Hello,
This arrow next to your Battery symbol at the top of your phone means you are playing some sort of music or sound.
To make sure you are not do the following:
Press your Home button twice quicky
You should now have a list of open apps. Hold down the App and press the red button. This does not delete the app but it closes it.
Once these steps are complete if the arrow is gone, you are all set!
Regards,
Jake

I am trying to connect my LaCie thunderbolt 2 5big drives to my new Mac Pro. They will not mount. If I unplug them and plug them into my MBP they mount immediately

I have 2 LaCie Thunderbolt 2 5Big drives. I have been using them successfully with my mbp. I just purchased a Mac Pro and plugged them in and they will not mount. I am stumped as how to get the Mac Pro to recognize them

This is the Mac Pro black cylinder, late 2013 model?
Have you tried one at a time? Have you tried different ThunderBolt ports?
What display are you using and what port is it plugged into? You may want to be sure your drives and your displays are not on the same bus.
This article show which ports are on which ThunderBolt Busses:
Mac Pro (Late 2013): Using multiple displays - Apple Support

Ext HD will not mount

My lacie HD - forwire 200 gig will not mount. It shows up in disk utilities but not on the desktop. In the info section of disk utility, the smart status is not verified. It seemed to go wacky after the last security update.

Lacie offers this advise in their FAQs. Put in FireWire drive and Mac OS for the search fields.
1) Try a different cable.
2) Repair the Permissions. Open the Disk Utilities and click on the First Aid Tab. Highlight your 'boot volume' on the left side of the window and click on 'Repair Permissions'. (Don't bother verifying first. It takes as long as repair and something always needs repairing).
3) Shut down, power off and disconnect all devices. Unplug the computers power cable (or remove the battery if a laptop). Wait about 15 minutes. Plug everything back in and boot up. This may reset the bus.

Firewire drives will not mount

I have two Lacie firewire drives. 500g and 1ty. I left the studio two weeks ago and came back Started my G5 and either of the two will not mount or even be listed in Disk Utility. I have a lot of video files on these drive. Please someone help me.

It would be worth trying a reset of the SMU which, for your Mac, I think is by shutting down, disconnecting all peripherals, disconnecting the mains cable for 10 seconds and then reconnecting the mains cable while holding the power button down – followed by releasing the power button and giving it another short press to power up the Mac. See this Apple doc.
It's probably irrelevant, but you might as well also reset PRAM and NVRAM – by starting up with 4 keys held down: Command, Option, 'P' and 'R', and keeping those keys down until you hear the 3rd 'boing'. (Apple doc).
G5 2.1GHz Mac OS X (10.4.9)

LaCie HD does not mount via Firewire, but does via USB (in Tiger)

I've read various posts on issues people faced when using a LaCie firewire HD after upgrading to Tiger. I never had any issues pre upgrade. I have installed the new firmware on my d2 250GB drive, at least I think I have. The drive will not mount when connected via firewire, but will when connected via USB. When I try running the update tool, it sees the drive and says there is no update available. Just to be clear, this is when the drive is connected via USB. The tool does not see the drive when connected via Firewire.
My firewire is definitely working fine (tested with iSight).
I've emailed LaCie, we'll see if that leads to anything. Any ideas???

My Lacie ethernet mini is not working after Lion upgrade.
Finally got an admission from Lacie that the login software won't work with 10.7 and they suggested going back to Snow Leopard . . .
Apparently the login software cannot be changed or overwritten so now Lacie drives are obsolete when using Lion.
I wish there was a way to wipe it clean and use it without the login software, but they couldn't suggest a way.
I note you may have had better luck but I don't know how to use terminal, so I may have to junk it, or possibly take out the drive and buy a caddy for it?

External Hard drive will not mount on desktop

I have a 17" Powerbook G4 that has replaced a broken iBook G4. I've been using a Western Digital MyBook Pro Edition as a secondary drive for my multimedia as well as my iTunes Library. It worked fine on the old iBook.
When I plug it into the Powerbook, using either USB2 or Firewire 800, it will not mount to the desktop. It DOES however appear in the System Profiler as "External HD Button and Lights". The drive is formatted for FAT32 and works fine on my Windows XP desktop machine, so I know the drive functions mechanically. A different hard drive, a Maxtor mounts to the desktop fine using USB2, so it isn't a bus issue.
This is driving me nuts. I LOVE this computer, but I have WAY more invested in music than the cost of the computer.
Thanks in advance.
Message was edited by: hempomatic

It took a while to figure it out but apparently there was a conflict with bluetooth. I disabled it and all is well.

My Ipod 4th Gen will not mount into Itunes

Please anyone with technical knowledge HELP ME.
The basic problem is that my 4th Generation Ipod will not mount into Itunes.
Let me tell you what I have done so far this includes all the R's, I have also followed the advice of reinstalling itunes and Quicktime I have also tried backwards installing to version 6 (at present I have upgraded to version 7.0.2). The ipod is visible in Windows and I still am able to use it as disk as I have programs I am using off it.
I have tried a fifth gen and also an Ipod mini and both mount onto my Itunes.
I have tried to reinstall the Ipod software, however the previous ipod updates do not work and as the Ipod cannot be mounted I cannot use Itunes to update it as it is not visible.
I have also run the Ipod Diagnostic in Itunes and everything seems fine (I have included the report if anyone can please understand it)and at the very bottom it states that the Ipod is truly Mounted. WELL ITS NOT
I really am getting desperate now as this is the same on both my Desktop and Laptop and I am getting very close to throwing the whole thing out along with all the rest of my computer equipment.
Thanks a lot
DIAGNOSTIC REPORT
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS AMILO PRO V2030
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskFUJITSUMHV2040BH______________________00000025, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller, PCI bus 0, device 16, function 0. Device is working properly.
VIA USB Enhanced Host Controller, PCI bus 0, device 16, function 4. Device is working properly.
IEEE 1394 Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller, PCI bus 0, device 12, function 2. Device is working properly.
Connected Device Information
PAUL'S IPOD (E:\), iPod with Click Wheel running firmware version 3.1.1
Serial Number: JQ447113PQ7
Bus Speed: 61440
The last connected iPod serial number: JQ524ER2S41.
The iPod Service Logging Information:
[SERVICE: 0xDA8,09:16:59 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Sat Nov 18 09:16:59 2006)
[SERVICE: 0xDA8,09:16:59 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xDB8,09:17:00 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x4F0,09:17:00 INFO] Listener Window created
[SERVICE: 0xDB8,09:17:02 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device is an iPod
[SERVICE: 0xDB8,09:17:02 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:08 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xDB8,09:17:08 INFO] [1] Assigning session 0
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xDB8,09:17:08 INFO] [1] input #0 from src #0
[SERVICE: 0xD24,09:17:08 INFO] [1] input #0
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
[SERVICE: 0xD24,09:17:08 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xD24,09:17:08 INFO] VendorId: Apple
[SERVICE: 0xD24,09:17:08 INFO] ProductId: iPod
[SERVICE: 0xD24,09:17:08 INFO] revision: 1.62
[SERVICE: 0xD24,09:17:08 INFO] vendor bytes:
[SERVICE: 0xD24,09:17:08 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0xD24,09:17:08 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xD24,09:17:08 INFO] [1] Power State: Not Powered
[SERVICE: 0xD24,09:17:08 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xD24,09:17:08 ERROR] Did not find first letter of stage
[SERVICE: 0xD24,09:17:08 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0xD24,09:17:08 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:17:11 INFO] [1] input #1 from src #0
[SERVICE: 0x52C,09:17:11 INFO] [1] input #1
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xDB8,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0xDB8,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0xDB8,09:17:11 INFO] [1] input #2 from src #0
[SERVICE: 0x4EC,09:17:11 INFO] [1] input #2
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xDB8,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 INPUT #1] - (HDW) Volume Mount
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:17:11 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:14 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:17:15 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:17:16 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:17:16 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:16 INFO] 9:17:16, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:17:16 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:17:18 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:17:18 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4EC,09:17:18 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:17:18 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #3 from src #0
[SERVICE: 0xD24,09:18:21 INFO] [1] input #3
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #4 from src #0
[SERVICE: 0x4EC,09:18:21 INFO] [1] input #4
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #5 from src #0
[SERVICE: 0x52C,09:18:21 INFO] [1] input #5
[SERVICE: 0xD24,09:18:22 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:23 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:23 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:23 INFO] [1] progress is now 1
[SERVICE: 0x4EC,09:18:23 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
[SERVICE: 0x4EC,09:18:24 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x52C,09:18:24 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0x52C,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:24 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xD24,09:18:24 INFO] [1] progress is now 0
[SERVICE: 0xD24,09:18:24 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x4F0,09:18:38 INFO] [VolumeRemoved] existing mask 0x10, arrive mask 0x10
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 1
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #6 from src #0
[SERVICE: 0x4EC,09:18:38 INFO] [1] input #6
[SERVICE: 0x4EC,09:18:38 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Unmount
[SERVICE: 0x4EC,09:18:38 INFO] [1] progress is now 3
[SERVICE: 0x4EC,09:18:38 INFO] [1] Setting progress to 3
[SERVICE: 0x4EC,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:38 INFO] [InterfaceRemoved]
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 0
[SERVICE: 0x4F0,09:18:38 INFO] removed device number 1 from m_objDeviceNumberMap
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #7 from src #0
[SERVICE: 0x52C,09:18:38 INFO] [1] input #7
[SERVICE: 0x4F0,09:18:38 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:38 INFO] [1] Progress state is 3, Waiting to disconnect = 0
[SERVICE: 0x4F0,09:18:38 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0x4F0,09:18:38 INFO] removed device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" from m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #8 from src #0
[SERVICE: 0xD24,09:18:38 INFO] [1] input #8
[SERVICE: 0x52C,09:18:38 INFO] [MACHINE 1 INPUT #7] - (HDW) Interface Removal
[SERVICE: 0x52C,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:38 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:38 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:39 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:39 INFO] [1] input #9 from src #0
[SERVICE: 0x4EC,09:18:39 INFO] [1] input #9
[SERVICE: 0x4EC,09:18:39 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:18:39 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:39 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #10 from src #0
[SERVICE: 0x52C,09:18:48 INFO] [1] input #10
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #11 from src #0
[SERVICE: 0xD24,09:18:48 INFO] [1] input #11
[SERVICE: 0x52C,09:18:49 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:49 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:34:58 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:34:58 INFO] [1] input #12 from src #0
[SERVICE: 0x4EC,09:34:59 INFO] [1] input #12
[SERVICE: 0x4EC,09:34:59 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:35:00 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:01 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:01 INFO] [1] input #13 from src #0
[SERVICE: 0x52C,09:39:01 INFO] [1] input #13
[SERVICE: 0x52C,09:39:02 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:02 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:02 INFO] [1] input #14 from src #0
[SERVICE: 0xD24,09:39:02 INFO] [1] input #14
[SERVICE: 0xD24,09:39:02 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #15 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #16 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #17 from src #0
[SERVICE: 0x52C,09:42:41 INFO] [1] input #15
[SERVICE: 0x4EC,09:42:41 INFO] [1] input #16
[SERVICE: 0xD24,09:42:41 INFO] [1] input #17
[SERVICE: 0x52C,09:42:41 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:42:49 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:49 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:51 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:51 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x4F0,09:42:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0x4F0,09:42:51 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #18 from src #0
[SERVICE: 0x52C,09:42:51 INFO] [1] input #18
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #19 from src #0
[SERVICE: 0x4EC,09:42:51 INFO] [1] input #19
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #20 from src #0
[SERVICE: 0xD24,09:42:51 INFO] [1] input #20
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 INPUT #18] - (HDW) Interface Arrival
[SERVICE: 0x52C,09:42:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x52C,09:42:51 INFO] VendorId: Apple
[SERVICE: 0x52C,09:42:51 INFO] ProductId: iPod
[SERVICE: 0x52C,09:42:51 INFO] revision: 1.62
[SERVICE: 0x52C,09:42:51 INFO] vendor bytes:
[SERVICE: 0x52C,09:42:51 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0x52C,09:42:51 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x52C,09:42:51 INFO] [1] Power State: Not Powered
[SERVICE: 0x52C,09:42:51 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x52C,09:42:51 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:42:51 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0x52C,09:42:51 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4EC,09:42:51 INFO] [MACHINE 1 INPUT #19] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:51 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:42:53 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:42:53 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:42:53 INFO] [1] input #21 from src #0
[SERVICE: 0x52C,09:42:53 INFO] [1] input #21
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 INPUT #21] - (HDW) Volume Mount
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:43:02 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:43:03 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:43:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:43:03 INFO] 9:43:3, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:43:03 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:43:04 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:43:04 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4F0,09:43:11 INFO] [VolumeArrive] mask = 0x10
[SERVICE: 0x4F0,09:43:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:43:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:43:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:43:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #22 from src #0
[SERVICE: 0x4EC,09:43:11 INFO] [1] input #22
[SERVICE: 0x4EC,09:43:11 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:43:11 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:43:11 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #23 from src #0
[SERVICE: 0xD24,09:43:11 INFO] [1] input #23
[SERVICE: 0xD24,09:43:12 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:43:12 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xF90,09:43:16 INFO] <0x4> Got Serial #
[SERVICE: 0x200,09:43:16 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x200,09:43:16 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x200,09:43:16 INFO] Mounted
[SERVICE: 0x200,09:43:16 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x200,09:43:16 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:16 INFO] Mounted
[SERVICE: 0xF90,09:43:16 INFO] [1] already mounted!
[SERVICE: 0xF90,09:43:16 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x200,09:43:33 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xD10,09:43:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD10,09:43:33 INFO] Mounted
[SERVICE: 0xD10,09:43:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:33 INFO] <0x4> COM request for device 1 drive letter - E
[SERVICE: 0xD10,09:43:34 INFO] Mounted
[SERVICE: 0xD10,09:43:34 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:34 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x200,09:43:54 INFO] Mounted
[SERVICE: 0x200,09:43:54 INFO] [1] already mounted!
[SERVICE: 0x200,09:43:54 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xD10,09:43:54 INFO] Mounted
[SERVICE: 0xD10,09:43:54 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:54 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.

If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.

How can I update my iPod classic that will not mount on iMac computer?

I can't update my iPod classic from my iTunes on my iMac computer with OSX 10.9. It will not mount or be recognized by iTunes version 12.1.
I plug it into the USB port and it charges, gives the "Do not disconnect" symbol but the computer does not recognize or mount the iPod at all. I haven't been able to update the music for years. I have four other devices associated with my Apple ID for automatic downloads. Is it too antiquated to upload any of my music from my computer to it anymore?

Ahh! The plot thickens!
I went thru the console and read the error logs. It appears that the .ipsw file does load.....I think. It's been years since I spoke computer....
Here is what I got after double clicking the .ipsw file and iTunes opened:
2014-12-28 11:05:02.430 AM syspolicyd[450]: assessment granted for iPod_13.1.3.ipsw by _XProtect com.apple.message.domain: com.apple.security.assessment.outcome2 com.apple.message.signature2: bundle:UNBUNDLED com.apple.message.signature3: iPod_13.1.3.ipsw com.apple.message.signature5: UNKNOWN com.apple.message.signature4: 3 com.apple.message.signature: granted:_XProtect SenderMachUUID: C6FC6A41-170C-3D84-BAAE-6983F164E903

How do I repair a hard drive that was being written to while my MacBook Air crashed? (Drive will not mount)

My external backup drive will not mount. I have tried to mount it in Disk Utility via the app and the command prompt but the attempt times out. Any suggestions?
I backed up my HD the day before dropping off my Mac for repair, and then tried again just before going to my appointment. During this last and final backup my Macbook Air crashed. I have since discovered that the drive will no longer mount, likely due to the crash that occured during the last attempted backup. I am unsure if the drive can be repaired.
My logic board was short circuiting some where that controls the headphone jack. Initially this prevented me from using the jack but eventually caused my mac to crash several times before I brought it in for repair. I believe that it is the this crashing that is responsible for my back up not being accessible but that my data may still be intact.
Thanks for any help you may have!

If possible, attach it to another Mac and see if it is recognized in Disk Utility. If so, run Disk Utility>First Aid. If not, the HDD may be damaged.
Ciao.

Hard drive will not mount shows up in Disk Utility

I have an external drive with a bootable OS X 10.6.8. I was in a transition between building up a SSD swapped drive. The SSD is installed in the CPU box but I have my old installation running from an external.
I have several external hard drives. They are all Firewire. Some have USB 3.0 and or eSATA options but my MacMini only talks to Firewire and USB 2.0.
I understand that you daisy chain Firewire drives and turn them on and off in sequence as they fall from the CPU box/case.
Firewire is a power source. I run the external with the OS using an AC adapter but one Firewire drive is powered through Firewire.
I have had as many as 4 external drives running along with the internal drive without a glitch while I was reorganizing files.
Today I booted off the external drive. It was running fine. I turned on one Firewire drive (the one that runs on Firewire power). That drive stumbled. I recognized the sound when there is an interruption in power. This cause the external boot drive to stall. I had to force a reboot.
Now the external boot drive will not boot up. It does not mount but Disk Utility sees it. The drive itself is bright and clear in Disk Utility but the partition (single) is faded out. I can run Verify and repair in DU. DU says it doesn't see anything to repair. It will not mount on its own or when I click the Mount button in DU. It does not produce an icon on the Desktop (because it is not mounting).
I also have SpeedTools. But although it sees the drive I cannot do anything with it. None of its tools run more than a spli second before they fail.
This drive has USB 3.0 and I see everything through USB that I see through Firewire. Connecting the other way did not get around the problem.
Of course I will buy an AC adapter for every external drive and never run them using Firewire again but the horse is out of the barn.
I have the original installation disks and could run the Archive and Install option but it would require physically swapping drives with the internal. I'd like to avoid it if possible. It is a MacMini and tedious.
Any suggestions?

I took the problematic hard drive and installed it in my Mac Mini so I could attempt a Safe Boot and then Archive and Install if necessary.
Safe Mode didn't work. The drive produced the circle with a slash symbol.
I reset the PRAM which was part of a list of steps to work through I found created by Apple Support.
I was able to boot up to Verbose Mode and view the text of the boot process. I wrote it all down. I can answer questions about the content better than typing it all out exactly. It includes, "...journal magic is bad..." "...failed to open..." and ends with "...cannot mount root, errno = 19"
I attempted Archive and Install however when it went to show what target drives were available it was a blank box and all buttons were grayed out.
I rebooted and opened Disk Utility from the DVD. The drive appeared the same with the top main line bright and the partitioned volume faded. Still was unable to mount. I ran Verify and this time a red line of text appeared "Invalid content in Journal" and at the end I ran Repair. When running I could read line by line and at one point it showed "checking volume information" then the following line "Repairing volume" the following line "Rechecking volume" more line of checking then it ended with "The volume was repaired successfully."
It still would not mount. I ran Verify again and again said "Invalid content in Journal" and this time it stopped midway saying "The volume was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Click Repair Disk."
I clicked Repair and it ended with The vol. was repaired successfully."
Still unable to mount I began repeating Repair over and over. Each time it found something to repair and ended with a success message. After several more Repairs I tried Verify and it stopped midway saying to Repair the disk.
Question: Does running Repair multiple times continue to correct bits and pieces little by little or is this a generic message and we should treat it as a problem Disk Utility cannot pinpoint and is just beating its head against the wall?
The step by step instructions I downloaded mentioned running Repair more than once but it did not say that running it 20 times would erode some problems and eventually lead to a fully repaired disk (if the problem was something DU could take care of in the first place). At this point I have run Repair about 20 times total with a series of 10 back to back skipping Verify. I keep seeing the lines about invalid content in a journal and that it repaired something successfully. Yet I still cannot mount the disk.

LaCie d2 will not mount in 10.4.7

Similar Messages

Maybe you are looking for