LaCie Desktop Manager doesn't recognize LaCie RAID with my 2011 MacBook Pro

Hello,
I have a new MacBook Pro 17" but I am not able to use the LaCie Desktop Manager with the LaCie 4big Quadra Enterprise Class RAID. The drive is recognized by the finder via eSATA, FireWire, USB, but is not recognized by the LaCie Desktop Manager. This prevents me from encrypting the drive. The LaCie Desktop Manager could recognize the raid with my early 2008 MacBook Pro.
I'd like to know if anyone else is having the same problem with their 2011 MacBook Pro.
I have been communicating with LaCie support but he tells me that he can't check the same or similar configuration as mine.
Thanks,
Dennis

Looks like the cable is the same if you still have the 2010.
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-SATA-SuperDrive-Cable/IF161-040

Similar Messages

Desktop Manager Doesn't Recognize My Phone

I've recently upgraded my computer from Windows XP to Windows 7, and on my original XP machine, I had DTM installed and it worked just fine with my Bold 9000. On my new Windows 7 machine, I've downloaded Desktop Manager 6.0, installed it, but when I plug in my phone into the computer, the Summary page in DTM still says "Connect your BlackBerry device". I know my computer recognizes my BB, because I can see it listed as 2 drives under My Computer (BB and my removable memory card). How can I get DTM to recognize my phone?

Hi There, I have a similar problem with my 9105. DM does not see my device. I have tried so many things that I am reaching the point where I go back to Windows Mobile. To make matters worse I paid for the Documents To Go upgrade so that I could sync my docs but that to can not see the device either. On the PC (XP) under device manager it shows as connected. And also as further below. Desperate

Desktop Manager doesn't recognize blackberry 8800 series

Hi. I have a blackberry 8800 series and it is having trouble being recognized by the blackberry desktop manager plugged in via the USB cable.
The blackberry desktop manager is version 4.6. It's running on a Windows XP laptop. The account has full administrative access to the laptop.
If you look at the Windows device manager you'll see the blackberry listed.
When you open the blackberry device manager the blackberry PIN is seen for a brief time then it is gone and you see "none".
There is one funny thing that happens. When you originally plug the blackberry in and then turn on the Device Manager, I see a quick install screen come up. That screen goes away quickly.
I've done a clean uninstall of the software. Reinstalled. Taken the battery out and put it back in. Placed the blackberry USB cable in every port still no dice.
I've seen numerous posts on the Internet and on this board with similar issue but, none really solved.
Has anyone seen this strange installation window come up?
Thanks for any help. I really don't want to wipe out either the blackberry or OS on the laptop as there is a time constraint.

I believe that the most recent updates are on the laptop but, I'll check again. I'm nervous that this is an issue with the laptop. It's an older Sony Vaio and may not be able to handle the 8800 series. I looked on Sony's website and updated the Vaio with the most current firmware

LaCie desktop manager wont run in lion

Hi
I have just purchased a new 1TB LaCie D2 Quadra External hard drive and connected it by Firewire 800 to my 27" iMac.
I am aware of some compatibility issues, and the setup assistant would'nt run on Lion and you have to reformat manually, which I have done.
I then had to download v.1.4.3 of LaCies Desktop manager which has loaded and installed successfully, however when I launch the desktop manager, it says "No LaCie desktop manager compatible device found".
I am in dialogue with LaCie Support but the turnaround is about 1 response a day, and I am keen to sort this out....
Thoughts are that this forum will be far quicker ! !
Many Thanks

zeff from shanghai wrote:
Parallels Desktop is dead in my Imac after update to Mac OS Lion.
If you can't start Parallels after Lion upgrade do this:
Open Terminal and past this 5 command lines one after another. After pasting first line, sudo command will ask you for your user password, so you have to enter it and press Enter (only after first command):
sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext"
sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext"
sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext"
sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext"
sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext"

Desktop Manager does not recognize USB Connection

I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'. I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
file:///Users/Nigel/Desktop/WaitingForUSB.jpg

I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8. It recently stopped recognizing the USB connection as well. I was able to sync my BB with the MAC but can no longer do so. The MAC mounts the BB and I can access the SD card. What gives here?

Desktop Manager won't recognize Playbook!

I have a recurring issues for 4 weeks whereby the desktop manager will not recognize my Playbook (PB).
I have uninstalled and reinstalled software.
My PB recognizes my PC upon connection.
My PC makes the standard noise when a USB is connected, but the D-Manager refuses to recognize the PB. Z drive does not come up either. And in Network Connections I have a LAN3 which recognizes the Reseach in Motion unit.
Plus my BB Bold is recognized.
I have already unistalled and re-installed software. Nothing seems to work.
I have spent 6 hours with RIM tech support going to the highest of levels and nothing.
HELP! ;-)
A

Is the PC a Windows based or MAC based?
What operating system are you using?
If you are using XP, you need to install Service Pack3.
With XP you need to install the latest Framework from MS. Going from memory I believe it is Framework 4.
If you are on Windows 7 you need the latest Service Pack.
You will need the latest version of the Blackberry Desktop software package installed.
Some older PC computers have issues with newer software even with all the OS updates, and not only with RIM software. This is because of the BIOS and chip set on the mother board. In some cases a BIOS upgrade, plus the OS upgrades will fix this type of thing on an older computer.
I have a twelve your old PIII server using dual processors running on XP-Pro that I still use in my network. There is no possible way I was able to get the Desktop software to properly work on it. It turned out to be a mother board chipset issue. The RIM software works on every other newer computer I have in our system.
Jerry G.
Jerry G.

Import Manager doesn't recognize E1MARAM segment

Using MDM_CLNT_EXTR and MATERIAL_EXTRACT object to create IDOC for materials. Use WE14 to send IDOC to XML port. I then use Import Manager to import XML doc into MDM.
If I use a material number range in MDM_CLNT_EXTR that gets multiple materials, the MDM import manager sees the E1MARAM segment as a source table. However, if I only specify 1 material number in the extraction program then the import manager doesn't recognize the E1MARAM segment.
I can open the XML files and see that the segment is there. Does anyone have any experience with this?
Thanks,
-Aaron

Hi,
Are you using standard Import maps or Custom Import map?
Regards,
Rajani

Desktop Manager Won't Recognize Media Card Installed

I have installed a media card in my device. I have changed the default storage of new pictures to the card. I would like to move the other images from device memory to the media card, but Desktop Manager will not recognize the media card is installed. The media card does contain images, and I have successfully emailed attachments. How can I get Desktop Manager to recognize the media card?

Hi there!
Here are some instructions for configuring your BB and Media Card to appear as USB drives within Windows:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
The only difference might be the version of DTM to use...5.0 is the current version.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1688 Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Just bought a 5c and when I connected to our desktop it doesn't recognize that the iphone is plugged in. We have tried multiple usb ports and nothing.

Hello csmithhisler,
Congratulations on your new iPhone 5c! I am sure you are eager to get your new iPhone set up, but sounds like your iPhone is not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Looking for a Hard Drive RAID System for 17" MacBook Pro, any Suggestions?

I purchased my 17" MacBook Pro in Nov. 09 and it does have an ExpressCard/34 slot. What I am looking to do, is purchase a 4TB Caldigit VR External Hard Drive and put it on RAID 0. I Love the performance fact, but I don't feel too safe, because if that drives go down, there goes my data. So what I want to do is use Carbon Copy Cloner and find another External Hard Drive that will backup my Caldigit VR, since it will be RAID 0. Any Suggestions would help out very much! I am using this RAID System to store my HD Video using Final Cut Pro Studio. I know I can set up the Caldigit VR as a RAID 1, but I would rather set it up as a RAID 0 and have another hard drive back the data up. Let me know if you have set up a RAID System for your MacBook Pro and what you did. Also what express cards do you recommend?
Thank you,
Chad

There is a difference technically between this iStorage unit and the Cal Digit stuff. Cal Digit includes a hardware raid controller, and removable drives. The iStorage Pro unit relies on your computer's CPU to control the raid... so will tax things like render times... plus just to play a software raid can take as much as 30% of your CPU's cycles to do it...
That said, it may not matter if you're working in lower resolution files, or lower data rate stuff, either company makes great gear though. Both are intended for use with video systems. But ya do get something for the extra money on the CalDigit gear.
But if all you want to use it for is backup of data... anybody's drives would do this... doesn't have to be a raid either. Single FW drives will certainly hold the data as backup even if they won't play it without dropping frames.
OH, and Colorado... join the Denver FCP User Group... http://www.dfcpug.com We meet at the Colorado Film School in Denver on a monthly basis.
Jerry
Message was edited by: Jerry Hofmann

How to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

how to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?

Use the Boot Camp Assistant in the /Applications/Utilities/ folder to put the Boot Camp drivers onto an optical disk or USB thumbdrive.
(80603)

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp

Late 2011 Macbook pro - Wont recognize 8gb memory

Hello Apple users,
so heres my problemo. I recently purchased this item . http://www.amazon.com/gp/product/B002YUF8ZG/ref=oh_details_o00_s00_i00?ie=UTF8&p sc=1 .
Corsair 8GB (2x 4GB) 1333mhz PC3-10666 204-pin DDR3 SODIMM Laptop Memory Kit CMSO8GX3M2A1333C9
For my 2011 Macbook Pro 13" 4gb. I Installed both sticks and turned it on, white/gray screen with apple logo shows up underneath it is a spinning white wheel and it spins for a bit then stops and nothing happens it just stays frozen like that. Now when I take one of 4gb sticks out and put a stock 2gb stick in, it loads and the computer turns on and recognizes that I have 6gb of memory. so im thinking okay maybe I have a faulty stick, but then I try the other 4gb with a stock 2gb and it works also.. so now im thinking okay maybe I DONT have a faulty stick.. so then whats the problem ?? I put both back in again in different slots and still not able to load. Am I not waiting long enough for it to fully load ? like does it take more than 5 mins to first start up? or is the speed on my macbook not capable of letting this load idk?
does anybody have the same problem and was able to solve it?
Any info will help, im about to start a new job and I need my macbook to be quick running multiple apps and having the extra storage helps.
thank you in advance!

It appers to be the wrong memory type. Reliable sources for memory (gurarenteed compatible and warrantied for life with excellent service) are OWC (macsales.com) and Crucial.com.
They both report the spec is PC3-10600, not 10666.
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=39021F53A5CA7304
http://eshop.macsales.com/item/Other%20World%20Computing/1333DDR38S08/
Can you return it and then purchase from one of these sources?

MacMini doesn't show up in Finder.app on MacBook Pro

Hi,
I'm using a MacMini (2012) as a headless Server.
After upgrading the MacMini to Yosemite (10.10.2), the MacMini doesn't show up in Finder on my Macbook Pro. I'm using this for Screensharing.
Its very strange, because if the Mini sleeps, it shows up in Finder. Then I click the icon, the Mini wakes up. But then the MacMini Icon disappears. :-(
After reboot the Mini it works as expected until the Mini goes to sleep.
I think its a general problem, because all Bonjour using services (like iStat Server) doesn't work properly. All services doesn't show up automatically.
Direct connect via manual tipping in the IP in the Screensharing.app works without problems.
What I've done:
- Resetting all Network settings, by deleting the /Library/Preferences/SystemConfiguration folder.
- The discoveryd service is NOT blocked in the Firewall settings.
- restarting all Router and the Airport Express
I hope u can help me.
Greeting Simon

Hi,
a dongle is already pluged in.
Its not a general problem with the Screensharing tool. Screensharing is working with dirket IP.
The problem is more the Bonjour discovery to other devices.

HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

That's why, you will need to upgrade to 10.8

LaCie Desktop Manager doesn't recognize LaCie RAID with my 2011 MacBook Pro

Similar Messages

Maybe you are looking for