LaCie DVR compatible with Digital Audio?

I'm looking for a FW DVD/CD burner that will be compatible with my G4 Digital Audio, 466 MHz. Requirements for the LaCie d2 DVD FW dual layer with LightScribe state 500 MHz. Will the drive work even though my speed is slightly slower? I would also like to use it with my PowerBook.
Is the Pioneer DVR 111D a better choice? I know the LaCie has the full version of Toast.

Hi!
Just to add to what japamac has advised-
I have a working Pioneer burner installed in my B&W 400MHz G3 tower (768MB RAM, currently running OS X 10.3.9). I don't have LightScribe, which may (or may not) be why LaCie specifies a 500MHz minimum processor speed.
Frankly, I'm somewhat puzzled about the LaCie tech's remark concerning your system maybe not supporting any DVD writer. That's simply inaccurate. I'm sure that there are plenty of other members here using various brands of DVD burners in Macs that are running slower than 466 MHz. Please know, however, that many software applications (iLife included) have minimum processor speed requirements. Perhaps that is to what the tech was referring, or perhaps it's specific to LightScribe technology...
I use a NEC ND-3550A burner in my QS Mac without issue. However, I tend to agree with japamac about sticking with Pioneer as a choice you won't be disappointed making.
Gary
ps to japamac: BTW, the Pioneer DVR-112D (18x) is also now available here in the US. Meritline currently has them for $33. I haven't heard much about it here in the US before now.
1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30 Mac OS X (10.4.8) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

Similar Messages

I have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2?

have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2

Jose A.-
What ports are on the Sony? The digital adapter should work with an HDMI port.
If the Sony does not have an HDMI port, there are also VGA, Composite and Component AV adapters available from Apple.
There is some additional info at <http://support.apple.com/kb/ht4108>.
Fred

CD-Rom drive with digital audio extraction support

I am looking to get a Zen Micro for my teenage daughter. The tech specs require a CD-Rom dri've with digital audio extraction support. My older IBM Aptiva, vintage 999, meets all the other requirements. How can I know whether the CD-ROM dri've will work? We are new to MP3 type players.
JimH

It only needs this to create MP3s from your CDs, and there are many alternati've programs that will do this. I would suggest taking a look at the Zen FAQ at Nomadness.net and trying?a couple of the programs there. If they work, chances are that the Creative software will work (but you can always use these as an alternati've).

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

Is Logic Pro X compatible with M Audio Fast Track Ultra ?

I'm running Logic 8 Pro with M-Audio Fast Track Ultra.
I'd like to upgrade to Logic Pro X.
Will these components be compatible?

If it has a Mountain Lion compatible driver then it should work. (Its not about LPX compatibility.. its about OS X compatibility that matters in almost every case)
See here for the drivers...
http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Ultra-Drivers
V2.2.2 is 10.8 compatible however there are several threads in their forums that indicate issues with 10.8.3 and higher...
Here is an example..
http://community.m-audio.com/m-audio/topics/driver_for_m_audio_fast_track_ultra_ mac_mountain_lion_10_8_3
Given that your interface is no longer a supported item.. and Avid have taken over M-Audio.. it might be that there will be no further updates leaving you unfortunately, with an out of date and no longer supported piece of hardware... which frankly is typical of M-Audio...
As a quick aside... This is why I stick with Motu equipment.. and have done so for many, many years now. Their support both for new and legacy devices is and has always been.. excellent.. and my original Ultralite Mk1 which is at least 7 years old now I believe, is still fully supported in the latest OS X version. using the latest Motu Drivers..
Anyhow.. Check with M-Audio/Avid to find out if this has been resolved......

Is Logic Pro X compatible with M-Audio Fast Track Pro?

Hi,
new Logix Pro X looks very interesting - does anyone know if M-Audio Fast Track Pro is compatible with it (couldn't find any topics so far..).
Thanks for your help!

Back to basics..
I googled Fast Track Pro compatibility with OS X 10.8.x and found several incompatibility issues and no experiences in version 10.8.4 so far.
So there is a risk that when ugprading Lion to Mountain Lion 10.8.4, Fast Track Pro wouldn't work any longer.
And purchasing LPX for 180e and a new MOTU audio interface for 230e over doubles the initial price of LPX alone..not so attractive deal anymore..
Do you know if there are any good ways to get back to Lion after installing ML if there seems to be problems with Fast Track Pro? I'm using MacBook Pro with preinstalled Lion. I googled too many articles on this and I'm still confused if going back to Lion is possible or not.
Thanks again!

I have a problem with digital audio

Everytime i record with my groovebox into logic 7, i get this pop up menu that says sample rate 48000 reconized..I checked everything and set to 441, groove box, M Audio and Logic and i still get the same thing YIKES!!!! What's wrong with this stupid thing...anybody got any answers? Please help befor i burn something....
Playmusic

If you are recording the 909 via it's DigOut (If they have them), do errors stop if you use it with analog and unplug the dig. cable? Who is the master (the digital device which all others follow for sample accurate timing).

Using iPod Hi-Fi with Digital Audio (Coaxial) Cable

I have a Bandridge Digital Optical & Coaxial Audio Switch Box which allows me to connect multiple devices to output sound through my ipod hifi via digital optical or digital coaxial cable(it actually converts from optical to coaxial as well). The problem is all devices connect perfectly through the optical ports on the switch box however my PC only has a digital(S/PDIF) coaxial port so I use a digital coaxial cable for this but no sound is output through my ipod hifi? Can the ipod hifi output sound from a digital coaxial source?

Grettings
With what you currently have it is impossible to do what you want.
However, take a look at http://rogueamoeba.com/airfoil/mac/ .
I have seen many plaudits for this on the boards, but have no experience with it whatsoever!

Need help with digital audio out on qip7232

Have seen lots of posts about digital and optical outputs from the QIP 7232. I want to run a digital, stereo, 2 channel LPCM signal out to a stereo receiver. There are posts on this forum that say that both outputs are disabled by Verizin. There are other posts that suggest various settings that could be tried but none of these have been confirmed to work. I have set the output to Stereo in the regular menu. I have set the output to LPCM in the hidden menu. Still, no audio output. I do have analogue output from the stereo left and right but want to get digital. Can anyone help ? Does anyone have either the digital or optical outputs working? Thank you Jim {Edited for privacy}

toslink cable will also work with MBP.

Maverick not compatible with M-AUDIO PROFIRE 2626 and M-AUDIO Fast Track?

M-AUDIO software for my PROFIRE 2626 and my M-AUDIO FAST TRACK audio interface devices do not work with Maverick???? ANY FIXES COMING? APPLE AWARE!!??
These devices have been bought by the company AVID from M-AUDIO and they have no software updates for Maverick on the 2626 and a software update for MAVERICK that causes play back problems on INTEL 2 DUO imacs such as my 2010.
As documented on their site:
http://avid.force.com/pkb/articles/troubleshooting/No-audio-from-USB-Interface-w ith-Mac-OS-X-Mavericks
And on several forums and community boards regarding the problem:
http://community.m-audio.com/m-audio/topics/driver_upgrade_for_profire_2626_usin g_mac_os_x_mavericks
Apple should be aware that these vendors
M-AUDIO and AVID are labeling and claiming compatibility with MAC OS and Apple computers and then leaving them useless with no software driver upgrades or faulty ones. This problem is causing many many music makers and Apple users unrepairable problems and financial loss.
At this point I am prepared to sell my Apple computers, and their falsely advertised compatible devices and go to Windows. This is a travesty and completely not acceptable. If I would have known of these issues with Maverick and M-AUDIO/AVID products and updates, and with Apples LOGIC 9.0 I would have never upgraded to Maverick and saved my devices and software.
I think is a shame that Apple does not work with these companies to insure that users of a 5 year old machine and 3 year old devices, receive adequate support through updated drivers and compatibility to MAC OS compatible products.
MAVERICK OS X has caused my music, which is my life blood, on my imac to come to a halt until I can either sell my computer and my interfaces or pay for new ones and a new LOGIX X. Unreal and not in the spirit of Apple products of the past.
M-Audio, AVID, and Apple should be ashamed of this situation and they should take care of the people who helped Steve Jobs build the company: Artists and Musicians mainly. This complete "buggy" travesty with Maverick is way more serious then I feel Apple is taking it.
I will do my best here in New York City to tell every musician and artist I know of the lack of care Apple and these two other supposedly friendly musician companies are showing in regard to their operating system upgrades and products. It is beyond a nightmare.
ANY SOLUTION????

Apple has nothing to do with it. Apple has no access to M-Audio's computers or the code for M-Audio's drivers. M-Audio let their customers down and stopped supporting their devices.

IPod Shuffle compatible with car audio iPod ready receivers

I was wondering if i purchase an iPod shuffle, would it play with iPod ready car audio receivers like the classic iPods do.

WeJa wrote:
I was wondering if i purchase an iPod shuffle, would it play with iPod ready car audio receivers like the classic iPods do.
NOT unless specifically mentioned in the documentation/specs of the car audio...
On the other hand, IF the audio system has an "audio-in" you can connect shuffle audio-out with a "patch" cable with a 3.5mm plug on both ends...

Linux chat clients compatible with iChat Audio

I have a friend who has Linux. What Linux clients are there that he can use so we can do audio chats, with me using iChat, of course?

Their Should be no problem with camera compatibility it is merely a video feed coming in to iChat that has been correctly converted. How ever I have no knowledge on AIM. I would try a Google Jabber account. Try this http://www.google.com/talk/otherclients.html it works on a lot of platforms and has good video quality. Best of Luck.

Are all Z-wave products compatible with Digital Life?

I just recently had the basic Digital Life system installed in my home. I was interested in purchasing third party z-wave locks and thermostats to install on my own. I can't find a list of compatible products for the Digital Life system. Does Digital Life support all z-wave products? If not, which ones do they currently support? Thanks!

At this time you cannot connect 3rd party z-wave devices to your Digital Life system. However, this is on the roadmap as a future enhancement.

IPhone no longer compatible with car audio

Since upgrading to iOS8 my phone defaults to "repeat all" whenever an external audio device is plugged in such as the car. Previously it started playing as soon as plugged in. Now in freezes until I unselect "repeat all". iPhone 5 & BMW iDrive.

Maybe we need to wait Apple for 8.0.1 or something like that.

Soundblaster Live Value with Digital Audio Output Card Help

; Hi, I have an?0 yr old?gateway with this sound card system and am trying to play an aftermarket Logitech Z-4 speakers without success. I get nothing. Will this sound card work with these speakers? Should I try to download drivers from Logitech? Changes to Bios? Any help would be appreciated. Thanks, [email protected]

Salut M?lancolie
Donc pour la li've elle fonctionne tr?s bien sous xp j'en ai 2 encore a ce jour
Seul les logiciel fournis avec ne fonctionne plus.
Pour les driver je te conseille de prendre les derniers pour la X-FI , ils regroupe aussi les drivers pour la li've :
http://www.touslesdrivers.com/index.php?v_page=23&v_code=2660
Cepandant il faut qu'une fois t?l?charger tu d?compresse dans un dossier et tu installe manuellement les pilotes par mettre a jour les drivers / choisir moi meme dans une liste, la il te d?tectera la li've et te l'installera, tu reboot et hop
Salut.

LaCie DVR compatible with Digital Audio?

Similar Messages

Maybe you are looking for