Lacie Ethernet Disk connected to Airport, no clients can access due to AFP

Hi, I'm using a new Lacie Ethernet Drive 500gig FAT-32 on it and all the clients on Macs get an AFP error, "This file server uses an incompatible version of the AFP protocol. You cannot connect to it."
Any thoughts, I was thinking I just need to enable TCP/IP connections but I can't get into it.
-Internet Wiz™

OK, I got it working now I have another question
Since the server is behiend my Airport do I need to open up specific ports on the Airport, if so what are they or where can I find them, and would I just use my public ISP IP addres like http://xx.xx.xx.xxx/ED_mini ? or a directory on it or what?
Thanks Again
-Internet Wiz™

Similar Messages

Is it possible to have an eternal ethernet disk connected to airport extr?

Just a simpel question because i have a WD 'netcenter' which is not accessible by usb but only with a lan cable?

Yes. It won't be usable with Time Machine.

Airport Express and Lacie Ethernet Disk Mini Home Edition

Hello -
I recently bought a Lacie Ethernet Disk Mini - Home Edition. I have it all set up on my home network when all of a sudden my Netgear router bites the big one.
I am looking into getting the Airport Express for its wireless streaming capabilities. My question is:
- Can I hook my cable modem through the USB port on the Airport Express for internet use? If so, can I hook my Disk Mini into the Ethernet port on the Airport Extreme to access my drive? If not, I spose I can buy a regular linksys switch to split the lines?

1. No, the USB port on the AirPort Express is solely for printer usage.
2. With the latest AirPort Expresses you should be able to access your hard drive via ethernet, but since there is only one port you will have to have another wireless router to broadcast your internet. And you can't just have a router to split the port on the Express, it either runs in WAN mode (which is for a cable or dsl modem) or LAN mode (for accessing your hard drive). It can't run in both at the same time.
You could buy a cheap Linksys router but I can't guarantee how well the Express will work with extending the wireless network. It really sounds like you need to get the AirPort Extreme Base Station.

Location Specific Automount SMB: LaCie Ethernet Disk Mini

Hey all
I recently purchased a LaCie Ethernet Disk Mini. I purchased it to use with .Mac backup at the house. I have an Airport network. I reformatted the drive to Mac OS X extended using Disk Utility and it seems to be working perfectly. I have been able to successfully back up via USB and Ethernet. In order to mount the drive I have to connect using command + k and then type in the assigned static ip address. It then mounts the drive on the desktop.
I then experimented with automounting the drive at login using an application called AutomountMaker. It writes a short executable script and then I added the script at login. This works also.
I would like to take this a little further and have the drive mounted only when I connect to a specific wireless network, and then dismount when not connected to that network. I am not sure how to do this. I have read numerous articles and googled the heck out of this topic with no avail. I came across the application NetInfo Manager, but I'm not sure if this is what I should be using or not. Above all, I don't know how to use Netinfo Manager.
Could someone please point me in the right direction or provide me with some suggestions? I do not know how to write applescripts nor do I know if applescripts are what I need. I am at a loss, but I would think that people have encountered this question before.
Thanks to any that can help.
LM

I would love to know the exact same thing. I just received the same drive, and it seems wierd that you can't just add the Volume to the Login items and have it connect for you are log in, I would have expected to be able to do this.
Of course this is totally a fault with OS X not the lacie drive itself.

Lacie ethernet disk mini as a network backup

I am not a real techie. I have an airport extreme network with an airport express to extend the reception range in the house. I bought a Lacie ethernet disk mini drive. I hooked it up via ethernet cable to the airport express and use it as a wireless backup for the 3 laptops in our family. I put it in the startup for all the laptops so that it shows right up on the desktop when the computer boots. I have been using it about a year or so and it works well. It can be a little slow when I try and back up my sons 47 gigs of photos. I do not know if I even have it hooked up correctly or the best way. Any suggestions? Anyone with similar setups?

I may not be the expert but it seems to work. I manually connected to the drive by using the "GO" menu, "Connect to Server", hit the "Browse" button, select "Network", then select the drive, authenticate with password, etc. and it should show up on your desketop.
Next open system preferences, go to accounts, then Login items. Either drag the icon for the drive into the box, or hit the plus box, find the icon and select it. I have done this on the three laptops and 3 desk tops at our home. It works fine. When you start up the computer it automatically shows up on the desktop. I use it to back up files, mostly music and photos. It can be a very slow back up. I think that is more the problem of "backup". I find that I have to break the backup packages into lots of smaller packages, instead of one hugh folder like Home.
I am a little compulsive about backing these things up. I do not know what amount of data you have. I also use mediamax.com. THey give you 25 gigs of free backup space. It is slow and prone to errors but eventually I got most of my stuff on there also.
I am still looking if someone more techie than I knows if the way I am using my network drive it the best way...
steve
That's exactly what I want to do. I don't like having
to manually connect to the server every time I
startup the computer.
Can you tell me how to do it? What did you put in
"startup" and where is "startup"? Thanks!

LaCie Ethernet Disk mini Home Edition

I'm considering buying a "LaCie Ethernet Disk mini Home Edition" http://www.lacie.com/us/products/product.htm?pid=10994 . The specs for this device says that it has iTunes Server support.
Can I use this to stream content to my Apple TV without my computer being on. Thanks...

I have an Lacie Ethernet gigabit mini disk 500GB. Software 1.1.2.1 and Apple TV.
In apple Tv appears the itunes library shared EDmini (the lacie ethernet disk) but when a i try to connect it, apple tv tell me to introduce the passcode into the ITUNES....
And that it's the problem!!! It's not possible to introduce any code.
Do anybody know the answer for this problem?
It's possible to configure apple TV for not be necesary PASSCODE before connect to a itunes library?

Lacie Ethernet Disk

Hi
I've got a new LAcie Ethernet BIG disk. Im gonna use it to transfer some data from my MacPRO to Laptop via FTP server on it.
Im useing a big files (footage=big *avi files), and i've noticed it's very slow when i'm copying files from MAC > Lacie HDD (local network). Network should be 1000Mbit, but copying 300GB files took me about 24hrs, I think it's much to slow. Do u have any idea what could happend, or it's just like it is. Or Maybe u got some other ideas how to sort it out. (im not bothered about FTP site speed coz i know the limits of my connection.

Hi maretsky :
Lacie Network disks are usually formated using FAT 32, (Older Windows format). This often can slow things down, especially with large files, although 24hrs for a 300GB seems excessive.
I have an older 100Mbit 400 GB lacie ethernet disk and I have experienced some very slow transfers especially with large files, in fact files larger than about 50GB refuse to transfer properly! I did some resarch and found that the FAT 32 was the problem.
If you just want to transfer the files then you can do this using firewire target disk mode on your macpro.
FROM APPLE:
Transferring files between two computers using FireWire
You can use a FireWire cable to connect your computer to another Mac and have one of the computers appear as an external hard disk on the other computer. This is sometimes called Target Disk Mode.
To transfer files using FireWire:
Shut down the computer to be used as a disk. Leave the other computer on.
Connect the two computers with a FireWire cable.
Start up the computer to be used as a disk, then open System Preferences, click Startup Disk, and click Target Disk Mode. (Or, start it up while holding down the T key.)
A disk icon appears on the desktop of the other computer.
Transfer files by dragging them to and from the disk.
Eject the disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
On the computer you used as a disk, push the power button to shut it down, and then disconnect the FireWire cable.
-Robert

Networking 2 minis and a lacie ethernet disk mini

The very small newspaper I work for just recently upgraded their equipment. In the department I am in we received two dual core mac minis, and we are wanting to use a lacie ethernet disk mini as our "server". Basically we just need a place to store shared files so that we can both access them and they won't take up space on either one of our computers. Everything I've read said that it should work as a "dumping ground" of sorts, and we've even heard reports of other small newspapers using the same setup. We also received an Airport Extreme to use as well.
We can get the disk mini to work with either of the computers individually, but we can't get it to work through the router or the Airport so that we can both access it. So far we've tried plugging it directly into the router and using the Airport to send the signal, plugging it directly into the router and plugging our computers into the router as well, plugging it directly into the Airport, and plugging it directly into one of the computers then trying to remotely access it with the other one. We've been able to access the internet and our printer as well as each other's computer with each of these options, but it will not recognize the disk mini.
We've been working on this a lot longer than we should have, and we've run out of options. We are stuck using the old equipment (two really old Power Macs) until we figure out the problem. Any suggestions on what we might be doing wrong?

Hi. I don't have any experience with this LaCie product, but I see from their support pages there's specific software to configure the drive for network access.
http://www.lacie.com/support/drivers/driver.htm?id=10048
Just a guess.
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.6)

LaCie Ethernet Disk mini compatibility

Hello,
I have a couple of Macs in the family, and I recently bought a LaCie Ethernet Disk Mini to use a NAS drive for my house. I set it up on one of the PC's in my house, now when I try and connect to it from my iMac, MacBook and Mac Mini I get an error message saying that I don't have permission to access this drive.
Does anyone know how to solve this or have had the same problem?
Thanks in advance.

Hi
I had the same issue with ethernet mini. After contacting Lacie support they suggested a reset of the drive. This worked for a while but then would fail again. In the end I sold the drive!
Sorry that's not that helpful but Lacie didn't have any answers either

LaCie Ethernet Disk Mini

I want to buy a NAS server to both back up my macs and share music and iphoto files. I have come accross the LaCie Ethernet Disk Mini. It got awfull reviews on CNet but ok reviews on Tom's hardware guide. Has aonyone on the forum got experience with setting it up? I would hook it to a switch which is connected to my aiport express so that all macs can access it remotely. thanks for any input.
p

I have found the Ether Disk Mini to be reliable and quiet; I guess my only complaint is that the data transfer is slow. By default the disk is formated FAT32, which has some limitations if you are an all Mac network. It gets slightly better transfer rates when formated EXT3, which is an option.
Overall I would say its OK, or par with Tom's Hardware review.

Can I access my files stored in the hard disk connected to airport extreme when I am away? how?

Can I access my files stored in the hard disk connected to airport extreme when i am away? How?

You can't technically. iPads cannot directly read HDDs like a computer can.
You will need an app liie FileBrowser to do this. Of course all file operations will be done through the App itself.
https://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8

My g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

my g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

Yes, when I bought my powerbook and airport and first set it up the chooser showed the HP 842C printer.
The printer is connected to the USB on the Airport.
The PB sees the G3 as a server (2 hard drives).
Do I need to set up the PB as a server on the G3? How do I do that?
I've tried Apple share, but when I try to connect to PB address or the name the G3 freezes.

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

LaCie Ethernet Disk Mini Gigabit/USB not recognized by Leopard

I have successfully setup the disk on USB using OS X Tiger 10.4.10 but I cannot get the Network Preferences Pane to recognise the disk as an ethernet device under OS X Leopard 10.5 during initial installation and configuration. Under Leopard the disk seems to appear as a modem device (telephone icon instead of ethernet <---> icon).
I am running a PowerBook G4 1.25Ghz with 2Gb RAM. Before I fully commit to Leopard I am running Tiger on the PowerBook's internal hard drive and I have Leopard running from a partition on a triple interface (Firewire 800/400USB2) 250Mb Lacie external drive (connected using FW800).
Under Leopard's System Profiler, the ethernet mini disk appears (under network>locations) with the following info:
Ethernet Disk mini:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: Yes
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
I have updated the disk's driver to version 1.1.1 from http://www.lacie.com/uk/support/drivers/driver.htm?id=10105 and have tried both the IP Configurator that came on the CD and the latest version from http://www.lacie.com/uk/support/drivers/driver.htm?id=10096
Has anyone else managed to get a similar disk running ok under Leopard? I've opened a ticket with LaCie support but thought I'd throw this open to a wider audience. I'll post any feedback I get from LaCie that leads to a positive result.

OK, I'm getting desparate here, and the only way to start a new thread is to reply to a previous thread I have (Apple, please fix the forums! No searching currently either!)
I have a Lacie drive that died on me - not showing up on the network, and making odd clicking noises. As a last ditch attempt I bought an external USB drive enclosure and took the HD out of the Lacie enclosure. Miraculously, the drive spins up much better and without any noise. I see the drive and all it's partitions in Disk Utility however none would mount. From what I've read, Lacie has an embedded Linux OS, so the partitions are formatted that way.
dk-kridan-consulting:~ dwayne$ ls -al /dev/disk1*
brw-r----- 1 dwayne operator 14, 3 Jul 17 15:39 /dev/disk1
brw-r----- 1 dwayne operator 14, 4 Jul 17 15:39 /dev/disk1s2
brw-r----- 1 dwayne operator 14, 5 Jul 17 15:39 /dev/disk1s5
brw-r----- 1 dwayne operator 14, 6 Jul 17 15:39 /dev/disk1s6
brw-r----- 1 dwayne operator 14, 7 Jul 17 15:39 /dev/disk1s7
brw-r----- 1 dwayne operator 14, 8 Jul 17 15:39 /dev/disk1s8
brw-r----- 1 dwayne operator 14, 9 Jul 17 15:39 /dev/disk1s9
So I tried installing ExtFSManager from sourceforge, and I now two of the partitions mount and I can see the data (YAY!) However (of course) the partition I really need is not one of the ones that mount.
Does anyone know what I could be missing, and how I can possibly get these other partitions mounted? From the listing below, it looks like the two that mounted OK are of type ext2
dk-kridan-consulting:~ dwayne$ mount
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local)
fdesc on /dev (fdesc, union)
map -hosts on /net (autofs, automounted)
map auto_home on /home (autofs, automounted)
/dev/disk1s7 on /Volumes/UNTITLED (ext2, local, nodev, nosuid)
/dev/disk1s8 on /Volumes/UNTITLED 1 (ext2, local, nodev, nosuid)
http://idisk.mac.com/dwaynekking/ on /Volumes/dwaynekking (webdav, nodev, noexec, nosuid, mounted by dwayne)
I have tried something like:
dk-kridan-consulting:~ dwayne$ mount -t ext2 /dev/disk1s2 /tmp/dktest
/mount_ext2: device '/dev/disk1s2' appears not to contain a valid filesystem
mount_ext2: /dev/disk1s2 on /private/tmp/dktest: Invalid argument
Not sure why the others won't mount.
I would be SO grateful to anyone who can help me out.
Dwayne

Lacie Ethernet Disk connected to Airport, no clients can access due to AFP

Similar Messages

Maybe you are looking for