LaCie external DVD drive no longer working

I recently upgraded the firmware on my LaCie DVD +/-RW burner so it would work reliably with a G5 running Tiger. It worked fine with that machine for several months. Unfortunately, it no longer works on my G5 that's running 10.3.9. I've downloaded and installed the latest updates from LaCie to no avail. The blue power light comes on but that's it. The tray only opens with a paperclip, and disks don't spin up. Any suggestions?

Hey, I would first try to take out the drive and "clean" the contacts on the drive to ensure it's connected. I'm pretty sure you can find videos/guides on how to take out the drive (shouldn't be too hard), there should probably be few screws that you would need to take out and then simply pull out the drive. If it's still not recognized, you can probably order the same model drive from amazon/ebay. All you would have to do is to simply put in the new drive in. 

Similar Messages

  • Playing movies on external DVD drive no longer works

    I am no longer able to watch movies from an external dvd drive with my 2011 MacBook Pro. I'm using VLC.
    The external dvd drive worked correctly until recently. Still works on another (Windows-based) machine. The DVD spins up, idles, but does not play. I've un-installed and re-installed VLC. No error messages given.
    I'm fairly new to Macs. Is there something I can reset to get this working? I don't understand why this would just stop working on this one machine.

    With the External HD still disconnected Restart the iMac and then re-connect the External HD.
    Optionally if you have already reconnected the External HD, open Disk Utility and see if you can select and re-mount it using the blue Mount button.

  • After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

    After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

    Have you revieved this support document?
    TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • Updated to Mavericks:cd/dvd drive no longer works since update. How do I fix this?

    I updated my macbook pro with the Mavericks update last week. Since then, my cd/dvd drive no longer works.
    It worked until I did the update. How do I fix this? Can I delete the update and if so how do I do that? or
    is thiere a fix for this?

    1. Reset PRAM.  http://support.apple.com/kb/PH14222
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • External dvd drive won't work on USB macBook air

    External dvd drive won't work on my macBook air usb port.  It works on older versions of air and iMac.
    Any ideas.  Tried the left shift, control, option and power button sumultaniously, but did not work.

    I know that no one has replied yet, but figured out the issue.  I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store.  They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive.  When I got home, I thought I would try one more thing.  I hooked it up to a powered hub and it works perfectly.  I'm not sure why no one else thought of it, but glad that I did.

  • External dvd burner no longer works

    hello
    recently upgraded from leopard to snow leopard. i have two macs in an audio studio where the computers, their hard drives, and some other gear is one room away from me in a machine room. this cuts down on noise for me in the control room of the studio.
    i've used external dvd burners for the two studio macs. both have been working great. these burners have worked fine under both tiger and leopard. suddenly, after the snow leopard install, neither works. i have never installed any special drivers for these, the os has always properly handled them.
    i have found that if i insert a disc, i can power the burner off and then back on and then the disc will mount. it will not mount just by inserting it per normal. also, cd burning software doesn't see this drive. it's not a choosable option in the menu.
    this is a major pita. i don't think that there is anything else that i can do here. i'm hoping it's clear to apple that this is an area of concern. firewire devices ought to be able to plug in and work, and the os which has handled this so well in the past is not doing it right now.
    i've tried some basic troubleshooting, like swapping firewire cables, but have realized via these forums than many others are having similar issues. i'd love to have this working asap.

    well, i have two external dvd drives, and both are firewire only. and neither one works anymore. it's quite a bummer. i'd love to see them working again. i kind of need them. i sure didn't expect this to be something that stopped working in snow leopard.

  • Installed 10.4.6 now ipod and lacie external hard drive no longer register

    Hi
    thankyou in advance, I updated to 10.4.6 but now the ipod and lacie external hard drive (usb drive) are not recognized by the computer. have tried disk utility, restarting etc but no difference. The lacie is recognized by another computer so it is not faulty. Any suggestions please?

    after reading this and resetting the PMU, my drive works. I'd say try it, the worst that could happen is you have to fix your time and date.
    read this-
    http://discussions.apple.com/thread.jspa?messageID=2072301&#2072301
    then followed this-
    http://docs.info.apple.com/article.html?artnum=14449

  • LaCie external hard drive no longer readable after being connected to a PC

    Hi all,
    First post here and I really worried.
    I have a Lacie external drive which I normally connect to my Mac - no problems.
    Tried to connect it to my Windows 7 pc to transfer some files and it wasn't recognised. It installs the drivers and says its ready to use, but doesn't appear as a drive. So I read about it and the advice was to go to Computer Management - Disk Managment and mark drive 1 / partition as active and then assign a drive letter. So I did that and then Windows tells me that I must format the drive to use it.
    Obviously I don't want to as I can't loose my data - my wedding pictures are on the drive!
    So I've plugged the Lacie back into my mac, and the drive is unusable and says I need to format too. Even the repair function doesn't work.
    Now I've read the another post and downloaded Test Disk (I'm working off my mac though as I know the drive worked and all my files where added from the Mac).
    Its currently Anaylsing the cylinder but its taking a long time. 24hours and still on 30% (1TB drive, firewire)
    I've read the help guide but once this stage completes, having read the next few steps, I'm lost.
    Any ideas on what might have happened and what I need to do next?
    I'll report back once its finished its 'deeper search' and analysing.
    Or do I abort the above process and do something else?
    Please help.
    Thanks in advance,
    Nick

    I've read the help guide but once this stage completes, having read the next few steps, I'm lost.
    And those few steps were?  Care to share?
    Lacie has great tech support.  Call them - http://www.lacie.com/support/faq/faq.htm?faqid=10338

  • Lacie external hard drive no longer readable by computer

    I am using a lacie tb hard drive, and ran data rescue 3 recovery software on it. Now, when I plug it in, the hard drive is not readable by the computer at all.
    Advice?
    thanks

    Hi BoyHowdyDoo,
    This is an external drive that traceyx is talking about, so no need to boot from the OS DVD to run DiskUtility.
    I'm a bit suspicious that the drive is actually physically failing, I'm afraid in this case, given the mention of bad blocks etc.
    Tracey, I'm not sure from your comments whether you have actually already managed to get the things you want from the drive off it or not?
    Running DiskUtility over it shouldn't hurt the drive, and may repair it sufficiently to get it "seen" again. I very much doubt if Drive Rescue has really done any serious damage to the drive if it was healthy beforehand, but the mention you made of bad blocks being reported is a worry, and the WD external drives unfortunately don't have a very good reputation for reliability.
    If you were trying to recover the deleted files to a disk that was itself already damaged then unpredictable consequences could have occurred.
    In this situation myself, assuming this is a Mac HFS(+) formatted external drive, If Disk Utility didn't fix it I would probably use Alsoft's "DiskWarrior" to try to repair it. It is capable of dealing with problems that are beyond the ability of DiskUtility . If that failed I would use DataRescue to try to recover the contents to another external.
    Rod

  • DVD drive no longer works

    HP Pavillion dv9812us VistaService pack 2 32bit.
    DVD no longer works. It isn't listed in device manager to enable driver reload or update. E:/ letter also is no longer there when using windows explorer.

    You're welcome - good to hear it's Ok
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Satellite L505D-S5983 DVD Drive no longer works

    Don't know how long ago this problem started, but whenever a cd or dvd is in the drive, the light flashes on and off. If you double click on the dvd drive in windows explorer, it takes a long time trying to read it, then says no dvd/cd in drive. Anyone else have this problem?

    You're welcome - good to hear it's Ok
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • La Cie Porsche Design External Hard Drive no longer working with Time Machine since update to Yosemite.

    My La Cie Porsche Design External Hard Drive USB 3.0 is no longer working with Time Machine.  Is Yosemite the cause?  How do I fix?

    Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

  • External Hard Drive No Longer Working After Being Removed From Mac

    The following issue is happening to two other mac users that i know and its quite frustrating.
    So if an external hard drive is not ejected properly from a mac, it then cannot be recognised by any other Mac’s. This issue is not isolated to just one external hard drive.
    Then if i plug the external hard drive/s into my 8 year old Dell (PC) it works fine.
    Further to this when i check the hidden files on the PC it looks as though Old Apple imbeds the external HD with a bunch of useless hidden files, once these are all deleted it miraculously works  again on the Mac’s.
    Too bad if you only have a Mac Because if the Mac disk utility can read the External HD it says that the disk has crashed and needs to be replaced.
    Nice one Apple...
    So now for my questions.
    Why does mac add hidden files to an external hard drive when not ejected properly that prevents it from operating again on a Mac ?!!!!
    How do i prevent apple from adding these hidden files?

    Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

  • DVD Drive no longer working

    Hi there, I tried getting help with this issue a few months ago, but no luck. So I'm trying again in hopes of a response. My laptop is a Satelite L655-S5058 (2 years old now) and the internal DVD drive stopped working. It would appear in "My Computer" as a generic CD drive, but I'd be able to get it back to normal by doing a shut-down and restart. Then it stopped working altogether. It won't even eject unless I stick a paper clip in the slot to force an eject. I've not only tried deleting the drive from "Device Manager" in the hopes that it would auto-reinstall correctly, but I've even tried a complete system recovery. No change. Is there anything else I can try? If not and the drive needs to be replaced, can someone point me in the right direction about how to order a replacement and self install? Thank you in advance for any input.

    Hey, I would first try to take out the drive and "clean" the contacts on the drive to ensure it's connected. I'm pretty sure you can find videos/guides on how to take out the drive (shouldn't be too hard), there should probably be few screws that you would need to take out and then simply pull out the drive. If it's still not recognized, you can probably order the same model drive from amazon/ebay. All you would have to do is to simply put in the new drive in. 

  • External hard drives no longer working in Mavericks - HELP!  I need my data...

    Hello
    I recently upgraded to Mavericks (10.9.2) and this morning I was trying to find some files so connected my external hard drive (back-up 1).  Light went on...nobody home.  The drive didn't register as it had done last week.  In my hurried state I plugged in external hard drive 2 (back-up 2) and the same thing happened.
    Not phased by this I took my hard drives to work and tried them in my PC and also a friend's mac (not upgraded).
    Annoyingly I cannot access anything, in fact they don't even register existence even though they are whirring with the lights on.
    Please help! I need my data

    Hello AstroTravel,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How can I recover deleted files

    The Issue I'm Experiencing, In Brief... Somehow I discarded a great deal of files from my HD, into my Mac's trash can. Furthermore to add grave insult to minor injury, I proceeded to empty that same trash can. Though I wouldn't know, I do feel slight

  • Issues on the Lumia 800 with "WIFI" and "Mobile ne...

    I keep my Lumia 800 on 2G/E at all times usually to conserve battery life, and because i'm at work with a wifi connection all day..occasionally when i go out i like to turn on the 3G and use the map functions etc. The problem occurs after a while tha

  • Where can i find the temp file in oracle 9ias ver 9.0.3

    Hi All, When I am trying to deploy stateless session bean(SLSB)in oracle 9ias ver 9.0.3,i am getting the following exception SequenceHome_StatelessSessionHomeWrapper3.java:9: SequenceHome_StatelessSessionHomeWrapper3 should be declared abstract; it d

  • Close Window (with O/P) out of IFrame

    Hi experts, I did create a new component (with bsp_wd_cmpwb) and therein a window. In this window I call an IFrame which is another BSP-Application. Now I would like to close this window out of the iframe. I did already create an O/P to close the win

  • Could not send out email...found out the real reason

    I use windows live mail.When I was away from home I could not send out any emails. When I called tech support, I was told because I was not at home using my DSL router. I mentioned that I could receive emails from Verizon no problem but could not sen