Lacie firewire 800 and powerbook

I am having trouble tranferring Final Cut Express and iMovie files over to my LaCie firewire 800 250GB Extreme. I get an error -50. Any idea what is wrong? It seems to only be those files.
thanks

David, yep that's the exact drive I was looking at!
So you chain two of 'em together with FW 800?
"Uses the ExpressCard/34 flash card slot for ingesting."
I presume you mean the new SxS cards go in the ExpressCard slot? I was aware that was the case, which is cool!
Will that FW800 connection be quick enough to edit from? It is with my current DV workflow, but with HD content?

Similar Messages

Confused! LaCie FireWire 800 PC Card

Greetings!
I purchased an Iomega 250 GB external hard drive. Because my notebook doesn't have an 800 Mbps port I also purchased a LaCie FireWire 800 PC card. I was aleady to hook all of this up today, when I discovered that the LaCie card has 2 FireWire 800 bilingual ports compatible with FireWire 400/1394a products. It also has 1 FireWire 400 6-pin port. The Iomega ext. hard drive has 2 FireWire 800 (1394b) ports and 1 FireWire 400 port and a USB 2.0 port.
Does a "bilingual" port on the LaCie mean that both a 1394a and a 1394b cable will work in the same port? If not, then how do you get the LaCie FireWire 800 PC card to work at 800Mbps?
Thank you in advance!!!
tenntooter (back again after a long time out of town.)

The information provided was helpful. I purchased the iomega external hard drive and an Lacie card, but I haven't been able to get these working properly. I only worked on this for a short time though, and I now have time to work on this some more. I'm sure that I've overlooked something. I'll get it to work I'm certain.
Thank you!

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

Mixing Firewire 800 and 400 on an iMac?

I have 2 external FW 400 drives on my late 2011 iMac. I use an 800 to 400 adapter. I've been thinking of getting a new external drive from OWC. The have both 400 and 800. The 800 case has 2 800 connectors and one 400. Does it make sense to mix? Will they all run at the slowest in the chain?
I was thinking of connecting the 800 directly to the iMac using the built-in 800 connection. Then chaining from there using the 400 connection to the other existing 400 external drives. Will I actually get 800 speed on the first drive?
Thanks

I have a mixed group of external drives, and just bought a new OWC Mercury quad interface drive.
The user manual that came with it says:
Note: If you are using FireWire 800 and add a FireWire 400 device to the chain, all devices will be reduced to FireWire 400 performance
I tested this myself, which confirmed it. I set up the following chain, with the first 2 drives connected by FW800, and with a FW400 drive either connected or not connected at the end:
HD ----800-----DRIVE1------800------DRIVE2-------400-------DRIVE3
I booted from my HD and timed the copying of a large file from DRIVE1 to DRIVE2. Although the FW400 drive was at the end of the chain and was never involved in the copying, just having it attached immediately reduced the speed of the file copy from Drive1 to Drive2. The actual speed reduction in practice was about 40%, not 50%.

WD MyBook Firewire 800 and M-Audio FireWire 1814 conflict

I have a big problem with an external HD Western Digital MyBook firewire 800 and a M-Audio firewire 1814.
When I turn on the external HD (connected via firewire 800) the sound card stops to play.
If I don't use the drive everything works, but if I use the external HD the sound stops again.
If I connect the external HD via firewire 400 or usb2 the soundcard works perfectly ...
I think there is a conflict in some driver but I do not have any soundcard (firewire) or any other external drive (Firewire800) to check WHERE is the problem.
I have the same problem in both my Macs (iMac 24 Aluminium and MacBook Pro 17")
Does anybody can help me? Am I the only one with this problem?
Do I have to complain with Western Digital, M-Audio or Apple Inc.?
Thank you for your help!
Carlo

Thank you Chris, I just wonder why Bee Jay can use the HD FW800 with the M-Audio Firewire interface without problems.
I use the ext HD for backup too, but sometimes I need to find something in my backups and I have to turn off the audio interface and copy the files on my internal HD ... then turn off the drive again and turn on the M-Audio ... it's very annoying.
In some forum I read that the problem can be the firewire chipset, but my iMac has the Lucent and the MacBook Pro has the TI (reccomended by M-Audio) ... same problem on both machines.
I did some test:
1) If I use the FW800 external HD and the FW400 with iMovie and my Video Camcorder I have no problem at all. I tried to use the HD at maximum (during a time machine backup I was copying other files and saving the HDV files in the same external HD) and everything works perfectly without loosing a single frame.
2) If I connect the HDV camcorder to the M-Audio interface I cannot even start the capture ... I have to turn off the external FW800 HD.
It looks that the problem is definitely in the M-Audio Firewire driver but unfortunatley the M-Audio e-mail support is only for US customers ... and I'm Italian.
Is there any US customer that has this problem and can insist with the M-Audio support?
Maybe they can solve it in the next release ...
Thank you in advance.

My firewire 800 and USB ports on not functioning!

My firewire 800 and USB ports on not functioning, I believe it is an issue the next driver loaders anyone, know how I can reset these?

You don't "reset" a driver (kext). And I don't believe it s a driver problem. However you might try doing a smc and pram reset to see if that "shakes the ports loose". Might work. Couldn't hurt to try.

FireWire 800 and 400

Can I link up two HDD's one FireWire 800 and one FireWire 400 into one FireWire port on my MBP?
Thanks

It is just that easy. I'm assuming you have a FW800 on your MBP? Just do a search on Amazon for Firewire 800 to 400 cables and you'll find some - very inexpensive - that will suit your needs. Oh! Here are some from monoprice - all under $9.
Regards,
Clinton

Is there a difference between firewire 800 and firewire 400 besides the connectors

is there a difference between firewire 800 and firewire 400 cables besides the connectors?

Speed. 800 is up to twice the speed, and sometimes faster. You can connect the two connectors with a cable that fits both ends, but you will be left with the slowest speed.

Lacie firewire 800 external hard drive not mounting in mac os 10.4.8

I have a pm g5 Dual 2ghz system ,i have connected an firewire 800 lacie 1tb external hard drive to the system,now the problem is it is not mounting on the desktop shows in the diskutility repaired the disk say's disk volume ok any way to mount the external hd on the desktop

Hi Veena, Welcome to Apple Discussions.
And you've tried choosing the volume and pressing the "Mount " icon on the tool bar of Disk Utility?
Have you shut down your Mac and disconnected your firewire cable from both ends and let it sit about ten minutes then reconnect and try. Also, it is important to disconnect the AC power to your Mac, this helps to reset the FireWire port(s).
Do you have TTP or DW, both of which you could use to try to mount it.
It is also possible that you have a bad cable or a bad port, do other FW devices work?
-mj
[email protected]

Daisy chaining two Lacie Firewire 800 drives on a G%

I've had one external drive working perfectly for months. Tried to daisy chain a second drive and can't get the second drive to register on my desktop. Support said to reboot. My system freezes upon shutting down. If I restart with the two connected, neither drives shows and my Eye TV shuts down. As soon as I disconnect the second drive, Eye TV works and the one drive appears. Any suggestions? Apple Care had none except purchasing a port that would handle firewire 800. How trustworthy would that be?

I've tried daisychaining a new d2 Big Disk Extreme FW800 and a d2 FW800 drive on my G5's FW 800 bus. I can't copy files from one drive to the other without an Error -36 code. I CAN copy to and from the drives to the Mac at nice fast speeds with no errors. Both LaCie drives are updated to their latest firmware, respectively.
The few times that I was able to copy a small folder from the d2 to the Big Disk, it took forever.
As a result of this thread, I'm now awaiting the delivery of a Belkin FW800 3 port hub. I hope this will clear up this issue, as I need to be able to move data between the two drives (both of which passed their tests via Disk Utility, Drive Genius, and DiskWarrior in flying colors).
I have noticed the older d2 FW800 has a lower firmware number than the Big Disk, however, the LaCie Update Tool reports that each drive is at its current appropriate firmware number. And yes, I ran the Update Tool independently on each drive, while the other was unmounted and unplugged.
Any advice?

OS X 10.6.8 incompatibility with Firewire 800 or LaCie Firewire 800?

Somewhere along the line my MAC OS X running version 10.6.8 stopped supporting Firewire 800. When I connect my LaCie remote disks the MAC seems not to see them. Since I have two separate LaCie disks and have tried several cables, I think I can eliminate LaCie and the cable as being the problem. I am up-to-date on LaCie's downloads. Does Apple have a fix for this?

Reinstall:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
You also might try Intel-based Macs: Resetting the System Management Controller (SMC). Or you can take it in for service in case it's a hardware issue.

Firewire 800 and Iomega 2Tb External Drive

I started using an Iomega 2Tb as Time Machine just over one year ago.
Initially it connected to my iMac 27" and worked perfectly with a Firewire 800 cable.
After a couple of months it suddenly stopped working and was not recognised in Finder or Disc Utility. I contacted Iomega and they suggested I try a new cable. I did and it did not make any difference. I have no other Firewire devices to test if the problem is with the Iomega or my iMac.
I switched to USB and that worked perfectly for a while. I have subsequently had problems with the Iomega "unmounting" itself, with a Journal Error comment when I run Verify in Disc Utility.
I have reformatted and remounted the Iomega twice but it has unmounted itself again.
I rotate three external drives as Time Machine back ups. The other drives are USB Freecom and Seagate 1Tb drives. They continue to work perfectly.
Because the Iomega has also given problems when connected by USB, I suspect it is the cause of the problem.
I would hope that we have reached the stage in home computing when we can buy a device, plug it in and it works, without having to waste time problem solving.
Can any one suggest anything else I can check?

Thanks Nick. The Iomega is the only external drive with which I have experienced any problems so I guess I wasted my money and will need to try another brand.

Daisy chaining firewire 800 and 400 devices

I am considering purchasing a blue-ray DVD recorder that has two 800 ports and one 400 port. My sony video camera has a firewire 400 connection and I am wondering whether that camera cable may be used to import video using my 400 cable connected to the 400 port. One 800 port would be connected to the computer. Or should I purchase a firewire800 to 400 (4 pin) cable and use the second 800 port on the recorder, or go direct from the computer swapping the cables when importing video?

Hi Charles
If your using the Core Duo with 2 400 ports listed in your profile, then you might be better off just connecting the player up 400 and then using the second 400 port for the camera. If however we are talking about a newer iMac, one with a single 800 port then you will want to connect the recorder up 800 and then the camera up 400 to that.
Also see > http://support.apple.com/kb/TA26476
Dennis

Mixing firewire 800 and 400

I have an older iMac (3.06 GHz Intel Core i3). I currently have 3 external firewire 400 drives daisy-chained to it. I use a 800 to 400 adapter on the back of the iMac to convert from 800 down for my drives. I was just looking at OWC and considering a new external. Just wondering if it would be worth my while to pay extra to get a USB3/firewire 800 enclosure instead of a 400. If I hook up the 800 directly to the iMac, then use the 800/400 adapter off the extra port on the back of the first drive to run the other 4 400 drives, will I be getting the 800 speed from the first drive, or will it be downgraded to 400 (speed of the older drives). If I was starting from scratch, it wouldn't be an issue, but since I don't want to loose the other 4TBs+ on my other drives. Hope someone knows the answer. I've heard conflicting stories on how this actually works.
Thanks

Just wondering if it would be worth my while to pay extra to get a USB3/firewire 800 enclosure instead of a 400.
If you think you'll ever upgrade you Mac I'd get the FW800/USB3.0 model so it will be usable at it's intended speed with the new Mac.
OT

FireWire 800 and USB bus failure

I am trying to resolve an ongoing issue with my iMac. External storage devices will not stay mounted. I have had data corruption and several drive failures that I believe are attributable to the sudden loss of connection to the computer. It can not be that all my drives – there have been five – are faulty. My newest drive, an OWC Mercury Elite Pro connected to the FireWire 800 bus, is beginning to exhibit the same behavior, and this drive is less than a month old.
What possible explanations are there for a FireWire or USB bus to suddenly drop a connected hard drive?
Thanks in advance.

Simplest explanation? Your iMac has a hardware failure. Take it in for service. It's probably NOT a software issue but a hardware failure.
Can we assume you have tried new or different cables?

Lacie firewire 800 and powerbook

Similar Messages

Maybe you are looking for