LaCie FW-800 Card and slower slots

Greetings!
I have a late model 2005 G5 and want to install a LaCie FW-800 card. Given that the fastest slot is in use by the graphics card, will any of the remaining slots impede or otherwise degrade the 800Mbps rate?
Information on the card is located here:
http://www.lacie.com/us/products/product.htm?pid=11574
Thanks!

Even 1x PCIe is faster than FW800's 800 mbit bandwidth.

Similar Messages

PC cards and PC slot - Help?

I see that my PowerBook has a PC slot, but what kinds of cards go in there? What are the options? Where can I browse the choices?
I have a PowerBook G4 running the latest and greatest system.
Thanks in advance!

This being a forum for questions about the PowerMac G5s, you're not likely to get a quick and accurate response. I'd suggest you ask in the applicable PowerBook forum.
Regards.

MSI Dual-Net Card and Communications Slot

Hey all,
ok, i want the MSI Dual-Net Card...i have HEARD that you need the MSI Communications Slot for it to work...is that true???
because there is absolutly NO MENTION of this on either the website or even in the manual for the card...
the manual even shows a picture of the card being installed into a NORMAL PCI slot...

Quote from: Klodrik on 24-August-05, 02:28:28
Do u have IVT corp. BlueSoleil prog.? On my cpu, when i start Bluesoleil, it says "please insert a bluetooth device", but when i push the orange ball in the middle, i says " Invalid operation", and most of the menus are grey, like Tools, My services and My bluetooth. I cant even use "Find device". I'm trying to connect to a cellphone which has bluetooth ( Ericsson k700i ).
yep, thats wat i have...and its the BEST Bluetooth software i've used...we have 3 Bluetooth USB Dongles in my house, and the software for them all (compared to this) is...well, just crap...
did u plug in the USB header??? for the bluetooth to work, it has to be connected to a USB header on the motherboard...
and i assume you've checked device manager to make sure the driver is installed...if not, do it...
BTW, i know wat was wrong with my Wireless Network...i had the Wireless Antenna and Bluetooth Antenna plugged into the wrong places now my wireless has full strength!

Lacie FW 800 PCMCIA card low speed in Vista

I have a Lacie FW 800 pcmcia card - whith on my old Toshiba Qosmio would give me read speeds of greater than 50Mb per seconds. Now with my lovely new Satellite and Vista it barely reads @ 7Mbs and writes at a pathetic 2Mbs. Any idea's before I get rid of Vista as a waste of time.
Dermot

Hi
Well, its not easy to say if its a PCMCIA slot issue or Vista issue.
But I have noticed that some users have had a slow PCMCIA performance with Vista on different notebooks series. So I tending to say its a Visa issue.
But it would also very interesting to know the performance with XP and then to compare the both results.

Lacie firewire 800 and powerbook

I am having trouble tranferring Final Cut Express and iMovie files over to my LaCie firewire 800 250GB Extreme. I get an error -50. Any idea what is wrong? It seems to only be those files.
thanks

David, yep that's the exact drive I was looking at!
So you chain two of 'em together with FW 800?
"Uses the ExpressCard/34 flash card slot for ingesting."
I presume you mean the new SxS cards go in the ExpressCard slot? I was aware that was the case, which is cool!
Will that FW800 connection be quick enough to edit from? It is with my current DV workflow, but with HD content?

Confused! LaCie FireWire 800 PC Card

Greetings!
I purchased an Iomega 250 GB external hard drive. Because my notebook doesn't have an 800 Mbps port I also purchased a LaCie FireWire 800 PC card. I was aleady to hook all of this up today, when I discovered that the LaCie card has 2 FireWire 800 bilingual ports compatible with FireWire 400/1394a products. It also has 1 FireWire 400 6-pin port. The Iomega ext. hard drive has 2 FireWire 800 (1394b) ports and 1 FireWire 400 port and a USB 2.0 port.
Does a "bilingual" port on the LaCie mean that both a 1394a and a 1394b cable will work in the same port? If not, then how do you get the LaCie FireWire 800 PC card to work at 800Mbps?
Thank you in advance!!!
tenntooter (back again after a long time out of town.)

The information provided was helpful. I purchased the iomega external hard drive and an Lacie card, but I haven't been able to get these working properly. I only worked on this for a short time though, and I now have time to work on this some more. I'm sure that I've overlooked something. I'll get it to work I'm certain.
Thank you!

My iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

my iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

Hi cosmoph1,
If you are having issues with your iPhone not recognizing the installed SIM, you may find the following article helpful:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Regards,
- Brenden

Slow requests after swapping staging and production slots

Hi!
I'm sometimes experiencing an issue where swapping staging and production slots creates a first slow request on the production (and sometimes on the staging) URL. I thought the whole point of staged deployments were to eliminate slow requests after deployment.
When creating a simple Hello World Website a normal load time for the website could be 100ms, but after swapping it sometimes increases to over a second.
I also tested this with a bit more complex websites and the first request after swapping sometimes exceeds ten seconds, which I find unacceptable.
I am measuring the request times with my browser throughout the swapping process. The websites I tested this with were Standard Websites which had Always-On enabled. The staging slot was called before swapping.
Am I doing something wrong? Why are first requests sometimes so slow? Or is this normal behavior?
Thanks in advance for an answer!

I'm still able to reproduce the issue.
I just created a new Website (Web App) with the name swaptest and a staging slot named staging. Then I created a git repository in the staging slot and this is the repo I am always pushing to.
After that, I created a basic node.js Express app via the generator and pushed it towards the staging slot. After I loaded the site successfully on the staging slot (which sometimes takes a few seconds, but is fine since this is the warm up) I swap the slots
via the new portal. Most of my swaps were fine, however one of the swaps was slow again. See the screenshot for a very long request time (9 seconds). I already loaded the page once on the staging slot, so it should have been warmed up already.
Screenshot: http://i.imgur.com/HXfDJr8.png
Website: http://swaptest.azurewebsites.net/
Staging: http://swaptest-staging.azurewebsites.net/
Timeframe: Within the last 30 minutes.
Please let me know if you need more information,
Thanks,
Peter.

I'm traveling to Europe (France and Lithuania) with my iPhone 5s. I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (

I'm traveling to Europe (France and Lithuania) with my iPhone 5s. I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (Apple Genius) say I must completely restore the iPhone if I replace the sim card. Still others say I cannot use a local sim card. Can you help me find the correct information? Thanks for your help.

That's a wonderful question, ssmiley67. The iPhone 5s comes unlock for international use. Many of our LTE devices are unlocked for international purposes and work upon inserting the international SIM in the device.
YosefT_VZW
Follow us on Twitter @VZWSupport

I brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him,,

i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

I don't know who you would contact at Verizon to verify this, but I suspect you are in the same situation as me. My unlimited Jetpack is now being throttled to a basically useless speed of .10Mbps. Sometimes as low as .04Mbps. Turns out this is done purposely as they are evidently eliminating unlimited. They're doing this now even though accounts still display on the my device page as unlimited. They have given no warning, no explanation and started it in the middle of a billing cycle. At least for me. Be prepared to pay about double for 20GB with I think and $8 per gig overage cost. With the 5GB plan it appears they just throttle down to an unusable speed. Currently considering saying goodbye to Verizon myself. Even with some need to change plans and eliminate unlimited this isn't the way to treat customers during the change.

The new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

the new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

For it to work(iPad) no. You do have to have it in to get data when your not connected to wifi. If it doesn't say 4g all the time that is because of the location your in. If your connected to wifi, the iPad will use the wifi connection first before using your data plan.

Hallo there.yesterday i opened my brand new ipad2 32gb wifi 3g bought from 5th avenue apple store and i found an atnt sim card inside the slot.is it normal????

Hallo there.yesterday i opened my brand new ipad2 32gb wifi 3g bought from 5th avenue apple store and i found an atnt sim card inside the slot.is it normal????

lllaass wrote:
In the USA, new 3G iPads come with a SIM card installed.
Just to clarify, in the USA, all new AT&T 3G iPads come with a SIM card installed.

Computer freezes when inserting a USB Bus Card into the slot.

I use this card as a way to capture video in FCE. I also have 2 external HD's which I use a scratch disks. I have used this configuration in the past and it has worked properly, however now, when I insert my USB card into the slot the computer freezes, has to be shut down, and I get this error message.
Can anyone tell me what's up? Thanks from Korea!!!
Daryn
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000014 PC=0x000000000048EE94
Latest crash info for cpu 0:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x4263AA00)
PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
0x002C1510 0x002C1B1C 0x000A9514
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
Exception state (sv=0x42429280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook5,5, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.5 GHz, 2 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-825, 565.88 MB
Parallel ATA Device: Hitachi HTS541080G9AT00, 74.53 GB
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
FireWire Device: 1394 Storage Front Panel*, Maxtor, Up to 800 Mb/sec
FireWire Device: LaCie d2 Extreme LUN 0, LaCie Group SA, Up to 400 Mb/sec
Powerbook G4 Mac OS X (10.4.9)

Bad card

LaCie FW-800 Card and slower slots

Similar Messages

Maybe you are looking for