LaCie SAFE drives not recognized by TM

Has anybody succeeded to use a LaCie SAFE drive (with fingerprint recognition) with Time Machine?
The local LaCie helpdesk told me it was too soon for them to answer such a question.
I have formatted the drive properly (HFS+ and GUID) and it mounts without any problem.
Déja Vu backup works flawlessly

Someone posted that they had contacted Apple and were told that Time Machine would not work with LaCie SAFE drives. However, it seems to me that support for drives with biometric security would be something that quite a few people would find to be a highly desirable feature. Anyone who is interested can request such support through Apple Feedback. The more people who request the capability the more likely Apple will be to add it:
http://www.apple.com/macosx/feedback/

Similar Messages

LaCie flash drive not recognized as a drive, but shows up in system profiler. Please help!!

I recently got a LaCie RuggedKey 16 gb flash drive. The problem is that recently I plugged in the drive and I can't access the files, however, it shows up in system profiler. There are still files on the drive, and I really need them. Can you please help me recover them?

If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed.

Lacie External Drive not recognized

I just unpacked and turned on my new iMac Desktop. Then I plugged in my Lacie Desktop external drive (with all my files, iTunes and iPhoto data) to move all of my files. But the Lacie Drive doesn't show up anywhere on the iMac when plugged in.
I've tried turning both the drive and iMac off and on again
Disk Utility does not see the drive
i tried all USB ports just in case one was defective
the drive does show on older laptops, incl. one with Lion installed
I've contacted Lacie tech support but they aren't responding
What can it be? what can I do??

MeganEllen wrote:
What can it be? what can I do??
Why are you repeating yourself? That's unnecessary and disconcerting. As for your LaCie issue, return it and get one from a manufacturer that is responsive and makes things that work. FWIW, I never use USB HDs. They're slow when compared to FireWire ones. I roll my own and never have issues. These are the latest combos:
Macally GS350SUA Hi-Speed eSATA/1394A/USB2.0 Storage Enclosure for 3.5inch SATA HDD w/Seagate ST3750640AS Barracuda 750 GB SATA 3.0GB/s Internal Hard Drive
Macally GS350SUAB Hi-Speed eSATA/1394A/1394B/USB2.0 Storage Enclosure for 3.5inch SATA HDD w/Hitachi 1TB HD31000 IDK/7K Deskstar SATA 7200 RPM 32 MB Cache Internal Hard Drive
Macally GS350SUAB Hi-Speed eSATA/1394A/1394B/USB2.0 Storage Enclosure for 3.5inch SATA HDD w/Seagate 2TB ST32000542AS Barracuda® Green SATA 3Gb/s Hard Drive

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Vista and ipod nano driver not recognized?

My computer (vista) won't recognize my ipod nano second generation. It tells me driver not recognized?
So when I plug in my ipod a little screen pops up and tells me that No drivers are installed for this device. Where can I download a driver
Thanks,
[Income For Life|http://www.website.ws/freedombucks]
Message was edited by: komrad

Apple has release a new version of iTunes 8, in responce the issues with Vista.
1.Unistall iTunes via StartMenu\Control Panel\Programs and Features
2.Delete all previous iTunes installers.
3.Download iTunes 8 from the Apple website.
4.Makes sure you close Outlook and Explorer and all non-essential programs, as it seems to prevent the install at certain points.
5.Install iTunes 8.
6.After the Install is complete, Open iTunes 8 before attaching your iPhone.
7.Unlock your iPhone if it is lock with a pass code.
8.Attach your iPhone, after a few seconds you should see that it has installed a driver for your iphone, then the iPhone will appear in iTunes.
I hope this helps, as I did spend some time with this issue myself.

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Drive not recognized - new issue...help please

I am replacing a 120 GB drive with a 250 GB one to give more space for video files. On reboot, I get the message: You have inserted a drive not recognized...etc...with the choices to initialize, ignore or eject.
Then I notice that the drive on the same bus (in the bottom of the tray) is not seen on the desktop. It was in two volume partitions and was also a 250GB. Big mystery. So I remove the new one and connect just the older drive. No luck, message says ...a drive not recognized...etc. So then I change the jumpers twice - same results - and I remove the jumper...same thing. I see this drive in Disk Utility represented by a number and size (232 GB) but not by the volume names. And when I try to verify or repair, the option is greyed out (yes, I booted to the install disc and went to Disk Utility, as per instructions.
This disk has data on it I need, and it's not backed up. All I did was unplug the connectors and then replaced them as before. So please, tell me how I can restore this one. I could remove it and put it in an external FW enclosure and then see if it shows up, but I don't want to take chances. Worse case scenario is a data retrieval service - and I'm almost certain I shouldn't have to do that as this is a healthy drive.
Any suggestions very gratefully appreciated, thanks!
Keith

Tom, I tried every one of your suggestions: set the older drive (Seagate) at P4 and first connector on IDE ribbon to cable select and the new drive (Hitachi) in tray just above it at P5 - end connector on ribbon also to cable select. Result: two dialog boxes for both drive on reboot "You have inserted a device not recognized..."
Then I tried slave on the Seagate and Master on the Hitachi...same result as above.
Then I tried alternate Master and Cable Select configs. on the Hitachi for 15 or 16 pin..whatever that is...but was printed on strip on drive. No go.
I think it must be another issue here than jumpers...although that may have something to do with it. When I installed a new drive in my Quicksilver I never got the Device Not Recognized dialog...it either saw the drive with all data on it or it didn't, until I set the jumpers correctly, as directed for that incident.
What bothers me is that when I removed the new Hitachi entirely and reconnected the old Seagate as the only drive on that cable, either with jumper set to CS or M or S I am still getting the dialog.
Any other solutions, please.
K.

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

Lacie External Hard Drive not recognized on Mac but recognized on PC

I just got both a MacBook Pro and a LaCie 1TB Rugged Safe External Hard Drive just a few days ago. I just plugged in my external and I installed the needed software from the drive, restarted and the drive wasn't found in LaCie Safe Manager. I tried restarting the computer without the drive plugged in, with Firewire and USB, and then I even tried it on my PC -- which it worked on there. I was able to make an account onto the drive and put my finger prints and everything on the drive, but when I came back to the Mac it didn't work at all.
I can't say it's the drive itself because it worked on the PC. I don't Tried the Disk Utility and it's showing "999.91 GB LaCie" and then "NO NAME" under it, but tabed over.
And help/suggestions?

Thanks for the ideas, JaEvo and Paul Cuciti.
EDIT: I tried this, http://vimeo.com/7539772. I did this on the Mac but I still don't have anything. I tried both USB and Firewire. I have power to the drive because, after I swipe my fingerprint, the red blinking light turns steady green. Also, I don't know if Macs make a sound when something is connected to the computer, kinda like a PC, but mine doesn't make a noise when I connect in the drive -- I don't know if that'll help anything or not.

Hard crash now hard drive not recognized in disk utility.

During a virus scan the Macbook froze up now the computer does not seem to be accessing the hard drive. Tried to reinstall Leopard but the internal hard drive is not recognized (same is true when we tried to use Disk Utility). It will not start in safe mode either. Does this sound like a fried hard drive or maybe a corrupted drive that might be repairable with DiskWarrior? Any thoughts would be appreciated.

If the A/V you were using was Norton/Symantec, the drive may be OK. Norton is a virus.
Burn a Ununtu CD and see if you can boot into it and look at the drive before giving up on it.

New Pioneer DVD drive not recognized in profiler

I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
A big thank you to anyone who can help me through this.

Since your computer's Apple Hardware Test is on a disc and the built-in optical
drive won't work, you may have to see if an external optical drive capable of
being used as a boot, is available. This of course would be a FireWire combo
type drive that can read & write DVD & CD media and boot Macs.
You may have to see if you can archive anything worth saving from that eMac
and put it on media via another computer; if the eMac can be booted into
Target Disk Mode where it is seen by another computer as a FireWire drive.
In fact, you could see (in a reverse scenario, perhaps?) if another computer's
optical drive could be used by your eMac, if a second healthy computer is
available & then boot it into FireWire Target Disk Mode to see if you can use
the optical drive in there as though it were a peripheral. - This may not work.
I've not had to really use FireWire Target Disk Mode, but do have cables,
and an externally enclosed LaCie FW HDD which is partitioned for clones.
There are times where a FireWire externally enclosed superdrive is handy.
There may be some damage on the logic board or some circuit that does the
controlling of ATA devices on one of the buses in the computer. That would
be a possible cause of the issue. If the identity of this drive can be changed
by the user before it is installed, be sure that is set correctly for use in eMacs.
{The three eMacs I've owned, had issues early on and I got rid of them in mere
days of first purchase; at considerable distance and effort by me. Then I got
an iMac which was an unholy terror to debug after an 'authorized service' ctr
did their best to kill logic boards and sell me defective store-brand RAM they
were authorized to install in a place I was not. ThreeThousand Miles and Six
Months later, I finally got my iMac back, repaired. Only because Apple told
them to read my test notes - & just install the parts I said it originally needed.}
Do you have a second Mac nearby (presuming yes, and using it online) which
may be used to attempta further diagnostic or testing of the eMac?
Not sure if an Apple Hardware Test would be sufficient to tell the issues in
your computer; if you have a way to make use of it via external FW. Hope-
fully someone with more extensive eMac and drive experience will advise.
Good luck & happy computing!

External USB drive not recognized.

I have two LaCie external drive which work fine, but all my other external drive aren't recognized.
I know this was happening with 10.4.10, any way to fix this with Leopard?

Me too:
USB4500 FW1.04:
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: DATAST0R Technology Corp
Product ID: 0x4500
Serial Number: 1966051022645658
Vendor ID: 0xed06
System profiler sees it, Virtual PC sees it in the USB settings, but it does not work in Windows on VPC.
USB prober sees it:
High Speed device @ 5 (0x5B300000): ...... Composite device: "USB4500 FW1.04"
Device Descriptor
Descriptor Version Number: 0x0200
Device Class: 0 (Composite)
Device Subclass: 0
Device Protocol: 0
Device MaxPacketSize: 64
Device VendorID/ProductID: 0xED06/0x4500 (unknown vendor)
Device Version Number: 0x0001
Number of Configurations: 1
Manufacturer String: 16 "DATAST0R Technology Corp"
Product String: 32 "USB4500 FW1.04"
Serial Number String: 48 "1966051022645658"
Configuration Descriptor: ................................."1966051022645658"
Length (and contents): 32
Number of Interfaces: 1
Configuration Value: 1
Attributes: 0xC0 (self-powered)
MaxPower: 98 ma
Interface #0 - Mass Storage/SCSI
Device Qualifier Descriptor
Descriptor Version Number: 0x0200
Device Class 0 (Composite)
Device Subclass 0
Device Protocol 0
Device MaxPacketSize: 64
Number of Configurations: 1
bReserved: 0
Other Speed Configuration Descriptor: ....................."1966051022645658"
Length (and contents): 32
Number of Interfaces: 1
Configuration Value: 1
Attributes: 0xC0 (self-powered)
MaxPower: 98 ma
Interface #0 - Mass Storage/SCSI
... but USB Prober gets this same error over and over:
314.289 [1] AppleUSBEHCI[0x1f05800]::Found a transaction past the completion deadline on bus 0x5b, timing out! (Addr: 5, EP: 2)
314.289 [1] AppleUSBEHCI[0x1f05800]::Found a transaction past the completion deadline on bus 0x5b, timing out! (Addr: 5, EP: 2)
Worked like a charm on 10.4.10 before the upgrade ... ... and it still works great if I plug it to my Windows workstation ...

Panther crashed now external hard drive not recognized

I was away and a person that lives where I work on my computer set up his computer right next to my G4 iMac. When I looked at the screen it was trying to boot into start up mode but wasnt making it. I firgure it must have been caused by all the pluging and unpluggung.
I tried the resart disk but still has problems, so I reinstalled 10.3.9 al over again. Now its working but it doesnt reognize my external Lacie hard drive.
Ive tried restarting a cople of times, I cant firgure out what could be the trick.
Has anyone any ideas?
iMac Mac OS X (10.3.9)
iMac Mac OS X (10.3.6)
Mac OS X (10.3.6)

I would try the Combo; it's worth a try!
I don't know if the following will help with your issue , since it shows up in Safe Boot, but here it is.....
External hard drive spontaneously unmounted? Try these tips:
NEW FIRMWARE: Try updating your external hard drive's firmware, which is available from your drive manufacturers Web site--or just use VersionTracker's (www.versiontracker.com) search function to find it. Be sure to back up your data before applying the update, and carefully follow the manufacturers instructions.
OUT OF iSIGHT: If you're using an iSight camera while you're using a FireWire drive, the camera may be interfering with the drive's ability to stay mounted. Try temporarily disconnecting your iSight and moving it to a separate FireWire port. If you have multiple FireWire devices, try using a FireWire hub.
POWER PROBLEM: A faulty power adapter could be causing your drive to unmount. Your drive may not be getting enough juice to stay on, causing the drive to turn off and thereby unmounting it from your Mac. Alternately, the power adapter may not be providing a steady amount of power, causing your drive to turn on and off. Try replacing the adapter. If you can't get a replacement adapter from the hard drive manufacturer, try your local electronics store. Just make sure the adapter you choose has the same connector and input/output voltage. you can find the input/output voltage on the adapter itself.
Cheers!
DALE

LaCie SAFE drives not recognized by TM

Similar Messages

Maybe you are looking for