Lack info about Exception

When exception occures in java stored proceudre error
information is not very informative and it's not enought for
problem detection. No information about error line number, no
stack trace.
If I want to make my own exception handler in java I cannot get
information about stack trace neither. This is no method in
Exception object to get stack trace as a String.
Unfortunaly I'm unable to start remote Stored Proc debugging in
JDeveloper. It display an error message "Unable to debur you
class" and give a tip that: "The following DebugProxy error
occurred:
Address in use: bind". But I didnot find any information how to
fix this "Debug Proxy" problem.
So, How to get more information about Exception in Java Stored
Procedure?
Thanks

Thanks for the anser,
I wrote a method to extract Stack Trace
private static String getStackTrace(Exception e)
PrintStream ps = new PrintStream(new ByteArrayOutputStream(), true);
e.printStackTrace(ps);
return ps.toString();
unfortunally Oracle does not provid Stack Trace information for it's java stored proc, or I don't konw where can I get it :(
Also PrintStream.toString() writes some trash besides stack trace

Similar Messages

  • ITunes and Finder - how are info about audio files refreshed?

    I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
    Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
    I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
    Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
    The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
    A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
    I would appreciate your help.
    Kind regards
    Alex

    I was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?

  • Read info about files in specific folder into internal table

    Hi Experts
    I need to have last modified date and filename information read into an internal table. I need to read in the information of all files in a specific (UNIX) folder (I do not know the name of the single files).
    I really hope someone can help.
    Thanks a lot
    Kind regards,
    Torben

    Hi Guys
    Thanks a lot for you input.
    I managed to get my program to works as follows:
    REPORT  ZDELETE_ARCHIVING_FILES.
    *Step 1: Get the list of files in the directory into internal table :
    DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
          DPATH    LIKE EPSF-EPSDIRNAM,
          MDATE    LIKE SY-DATUM,
          MTIME    LIKE SY-UZEIT.
    DATA: BEGIN OF FATTR OCCURS 0,
              FILE_NAME  LIKE EPSF-EPSFILNAM,
              FILE_SIZE  LIKE EPSF-EPSFILSIZ,
              FILE_OWNER LIKE EPSF-EPSFILOWN,
              FILE_MODE  LIKE EPSF-EPSFILMOD,
              FILE_TYPE  LIKE EPSF-EPSFILTYP,
              FILE_MTIME(12),
          END OF FATTR.
    DATA: P_PATH(50) TYPE C.
    CONCATENATE '/ARCHIVE/' sy-sysid '/archive' INTO P_PATH.
    *        WRITE: / P_PATH.
    DPATH = P_PATH.
    *Get files in folder - read into internal table DLIST
    *if filenames are longer than 40 characters
    *then use FM SUBST_GET_FILE_LIST.
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
         EXPORTING
              DIR_NAME               = DPATH
         TABLES
              DIR_LIST               = DLIST
         EXCEPTIONS
              INVALID_EPS_SUBDIR     = 1
              SAPGPARAM_FAILED       = 2
              BUILD_DIRECTORY_FAILED = 3
              NO_AUTHORIZATION       = 4
              READ_DIRECTORY_FAILED  = 5
              TOO_MANY_READ_ERRORS   = 6
              EMPTY_DIRECTORY_LIST   = 7
              OTHERS                 = 8.
    IF SY-SUBRC EQ 0.
    *Step 2: Read the file attributes into an internal table
    *Read info about the files (attributes) into the internal table FATTR
    *as we need info about the last time it was changed (MTIME)
      LOOP AT DLIST.
        CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
             EXPORTING
                  FILE_NAME              = DLIST-NAME
                  DIR_NAME               = DPATH
             IMPORTING
                  FILE_SIZE              = FATTR-FILE_SIZE
                  FILE_OWNER             = FATTR-FILE_OWNER
                  FILE_MODE              = FATTR-FILE_MODE
                  FILE_TYPE              = FATTR-FILE_TYPE
                  FILE_MTIME             = FATTR-FILE_MTIME
             EXCEPTIONS
                  READ_DIRECTORY_FAILED  = 1
                  READ_ATTRIBUTES_FAILED = 2
                  OTHERS                 = 3.
        IF SY-SUBRC EQ 0.
          FATTR-FILE_NAME = DLIST-NAME.
          APPEND FATTR.
        ENDIF.
      ENDLOOP.
      SORT FATTR BY FILE_NAME.
      DATA: time(10), date LIKE sy-datum.
      DATA: months TYPE i.
      DATA: e_file TYPE string.
      LOOP AT FATTR.
      CLEAR: time, months, e_file.
        IF FATTR-FILE_NAME(10) = 'archive_BW'.
    *Convert the unix time into readable time
          PERFORM p6_to_date_time_tz(rstr0400) USING FATTR-FILE_MTIME
                                                     time
                                                     date.
    *Calculate the number of months between date (MTIME) and current day
    *ex 31.03.2009 - 01.04.2009 = 1 month
    *ex 01.02.2009 - 01.04.2009 = 2 month
        CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
          EXPORTING
            i_datum_von = date
            i_datum_bis = sy-datum
          IMPORTING
            e_monate = months.
            CONCATENATE DPATH '/' FATTR-FILE_NAME INTO e_file.
    *        WRITE: / FATTR-FILE_NAME,
    *                 FATTR-FILE_SIZE,
    *                 date,
    *                 time,
    *                 sy-datum,
    *                 months,
    *                 e_file.
    *Step 3: Delete files where months > 1
          IF months > 1.
            OPEN dataset e_file for output in text mode encoding default.
            DELETE dataset e_file.
            CLOSE dataset e_file.
          ENDIF. "months > 1
        ENDIF.
      ENDLOOP.
    ENDIF.

  • Need deeper info about RPC paradigm

    Having scoured the Web for info about RPC, I find the same few discussions repeated widely, but certain things left unexplored. I therefore have particular questions that remain unanswered.
    1) RPC server behavior appears predicated around "connect-call-disconnect, connect-call-disconnect, ..." behavior on the part of the RPC client; that is, a connect-and-disconnect around every remote procedure call. I, on the other hand, need my clients to implement "connect-wait-call-wait-call-wait-call-...-disconnect" behavior; that is, to connect, REMAIN connected for an extended period of time across multiple procedure calls, and disconnect only when the client is ready to terminate all use of the server. It appears that svc_run() supports this, but I want to avoid surprises; is there any restriction on this usage of svc_run()? Can this paradigm be supported by appropriate use of the RPC library routines available for replacing svc_run() with my own code?
    2) The only "documentation" I have been able to find about how to write actual RPC programs dates back to 1992 and does not come from Sun. Virtually all of the routines appearing in its example programs are designated "obsolete" or "for backward compatibility" in their manpages on Solaris 8. Can you recommend/point to an instructional text that describes RPC programming as it would be done with "today's" interface?
    3) Probably the largest single obstacle to my organization's possible use of RPC in "real," critical applications, is RPC's continuing C-specificity. We write all our applications in C++, and mostly object-oriented C++ at that -- whereas RPC appears not to have advanced beyond the "C with global variables" architecture (with one possible exception, following). Code generated by RPCGEN (without the -C switch, I admit; I haven't gotten that far in my trial-and-error experiments, yet) requires extensive hand-editing in order to compile C++ code that uses it, or link successfully with compiled C++ code. This obstacle is severe enough to potentially render RPC an unacceptable solution for us.
    The possible exception I mentioned is that I found a webpage that discussed something called 'rpcc,' which appeared to be an object-oriented, C++ implementation of RPC. The page said this was available "on Sun machines," but I don't find it on MY Sun machines. Other searches do not turn up other references. Such a thing would be a godsend if it existed, and it would seem not to be so difficult for Sun's professional developers to create. So does it exist? If so, how can I get my hands on it?
    4) Different sources contradict each other as to the "semantics" of an RPC procedure call. Sun's ONC manual says flat-out that Sun RPC provides only "at least once" semantics -- but then, the manual takes the approach that one is using RPC in a "transport-independent" manner. Other references discuss the issue at greater length (hint, hint) and imply that any RPC implementation can provide "exactly once" semantics, providing that one specifically force it to use "a reliable transport such as TCP." It is not clear how much to infer, or disregard, in Sun's simple statement. I need to know FOR SURE whether Sun RPC can be made, forced, tricked, etc. into providing "exactly once" semantics. If so, is "use of TCP" sufficient? Or are other tricks needed? Please outline the necessary steps that might be needed in addition to using TCP.
    5) (Related to 4. Sun documentation contains language to the effect that Sun RPC provides "at least once" semantics because providing "exactly once" semantics "would be too difficult." However, a graduate student (at Syracuse U if I recall correctly) posts a research paper in which he describes an RPC facility, developed from scratch, that provides "exactly once" semantics. Apparently it's not THAT difficult, after all. The fact that it's "too difficult" for Sun does not exactly flatter the company. They may want to revisit this, and provide yet another RPC interface (in C++ while they're at it). I won't even charge a finder's fee. ;-) )
    Thanks in advance,
    Chris

    I agree fully.
    None of the example code applies to todays
    "real-world" applications. Im trying to implement
    multithreaded RPC on Solaris using rpcgen's -N
    "NewStyle", -A "Auto multithreaded" and -C "ANSI C"
    options but none of the examples anywhere show how to
    do this. Is their a better technology that everyone
    is using now that does a similar thing?I have an example that might help. It's a multi-threaded
    NIS server that's been running in production for several
    years. There are a few tricks in the source that might help.
    You can download the source with anonymous FTP at
    ftp.cc.umanitoba.ca. Look in the `src' directory for
    midas.tar.Z.

  • Info about the RFC

    Hi,
    I have to work on RFC FM.  Can any body give me the info about the RFC? especially for Function module?
    Will give Reward points
    regards,Ram

    Hi
    RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
    and you will be passing an Import parameter DESTINATION to it.
    Other code and usage will be similar to any fun module;
    Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
    Refer this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
    Function Modules doc
    Function Modules;
    Check this matter.
    Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
    You can create them from TCode SE37.
    Go through the following doc:
    Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
    Function Module Interfaces
    The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
    Syntax
    ... [IMPORTING parameters]
    [EXPORTING parameters]
    [CHANGING parameters]
    [TABLES table_parameters]
    [{RAISING|EXCEPTIONS} exc1 exc2 ...]
    The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
    Interface parameters
    The interface parameters are defined on the relevant tab pages in the Function Builder.
    IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
    EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
    CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
    TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
    Exceptions
    The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
    The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
    The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
    Note
    For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
    RFC is a technology which is used to access a functions (Modules) from
    the remote systems.
    If a function module is set as remote enabled which can be access from
    the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
    A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
    But Normal function modules can not accessd from the remote system.
    Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
    Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
    CALLING A FUNCTION MODULE:
    1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
    --> Write the Corresponding FM name --> Hit Enter
    2)The appropriate import ,export Parameters will be displayed in ur editor
    3)Pass the Values Here.
    Also check these links.
    http://www.geocities.com/victorav15/sapr3/abapfun.html
    Check this link:
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
    Check this link:
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
    See the following links:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
    Reward points for useful Answers
    Regards
    Anji

  • Any new info about being able to sync my iphone 4 with the Palm Desktop on macs running snow leopard?

    Any new info about being able to sync my iphone 4 with the Palm Desktop on macs running snow leopard? Why doesn't someone take a a few hours and write a workaround so I can sync all my info including my Palm notes to my iphone via Palm Desktop without putting it in the clouds or making it complicated?  : (

    I feel your pain.  I am a long time user of Palm Desktop/Claris Organizer and have an iPhone that I really can't sync except by doing an export and import into iCal, etc.  You might try Missing Sync.  I have been working intermittently with writing a replacement for Palm Desktop, but I've only gotten as far as dumping out the information for everything (except repeating appointments) as an XML file.

  • Why was I given false info about my delivery from customer care?

    I pre-ordered two phones in store. I had to pay out my current edge up price in order to edge up early to the iphone 6. I also got another phone on my line edged up to the iphone 6 plus. At the store I asked if I could bill the initial payment to my account (I have billed to my account on several other occasions). The in store rep said I could not bill this particular charge to my account, which I was totally okay with. I gave my debit and he swiped it. This morning my card was charged because my order shipped; I have no problem with this method, but I am frustrated I did not know this from the beginning.
    Also, I contacted customer support after receiving a text that my account had been charged $54.13. I checked my bank account and Verizon had actually charged me $80.90. Why wasn't I notified of the correct amount?
    I spoke with customer service this morning. The first rep was named Courtney I believe. She told me my phone was out for delivery today. After both USPS and UPS had been to my apartment I went down and checked for a slip saying they missed me: no slip. I called customer service to get the tracking number so I could further look into the issue. The second rep I spoke with was Mitchell. He said the package was in the city of the store I had ordered at and may have been delivered to the store. He called the store I ordered at and conferenced me into the call. Mitchell was no longer on the line randomly so I stayed on to see if someone at the store could help. The store rep told me that phones are not delivered to the store and she could not look up any account information over the phone. She referred me back to customer care. I called for the third time hoping to get some answers; I believe this rep's name was Ignasio. He was absolutely the most helpful and straight forward, but he informed me that the previous two reps were incorrect and could NOT have known any information about my phone's delivery status because it had not been issued a tracking number yet-he called Fed Ex with me on the line and Fed Ex confirmed that a tracking number had not been created because the package had not been shipped yet. I WAS SO FRUSTRATED that I was given false information from two different reps and never told a charge would be placed on the account the day the phone began processing to be shipped. Had I known that information when I placed the order in-store I would have known that the phone had just been processed for shipping today, because that's when my payment processed. I was not rude to anyone that I spoke to today, but I wanted to write this out because I was frustrated with the entire experience. How could I be given specific delivery info about my package if there is not even a tracking number for it yet?

    Welcome to dealing with Verizon's customer anti-care.  I have had a similar experience over the last week.  I tried to order 2 Iphone 6s and an Iphone 6 plus to replace the Iphone 5s, my family now use.  When I tried to order the phones on Apple's website, there was a weird error saying that I could only pick up the phone in an Apple store.  I called customer care to find out the issue.  They of course blamed Apple and said I could order the phones on Verizon's website.  I said that would be fine except that I was concerned with the shipping times, since my wife and daughter's phones are starting to have issues and I did not want them  to have to wait until late October - early November when the phones they want showed to be in stock with Verizon.  The representative said that the phones would ship as they are available so the silver 128GB silver Iphone would ship the next day, the Space Gray 128GB would ship on 10/3 and the Iphone plus would ship on 10/31.  I went ahead and went online and ordered the phones.  I waited until 10/2 to call to find out what happened to the silver Iphone and was told that none of the phones would ship until they were all in stock.  I cancelled the order and figured I would order them from Apple.  I asked when I cancelled the order how long it would be til I could place an order with Apple and was told it usually will let you order immediately, but in some cases it can take a couple of hours.  This was at about 8:00pm on 10/2.
    On the morning of 10/3 on went to Apples website and it said that there was a reservation for the lines in question.  I again called and spent an hour on the phone with Verizon to find out that the previous representative had not cancelled the order.  There were lots of notes to cancel the order, but the order was still pending.  The rep Louise was terrific and even sent me a screen shot to show that the order was cancelled.  I waited a couple of hours and tried to order the phones again.  The error saying that I would have to go to the Apple store was back.  I called Verizon they said it was on Apple's end.  I called Apple and they said it was on Verizon's end.  I decided to go to the local Apple store to see if they could help.  The rep at the Apple store was really helpful and said that is the same message they see when someone is setting up a new Verizon account (We have been with Verizon since 2002, and have never been late on a payment).  During our investigation the Iphone 6s showed available at another Apple store about 10 miles away.  I ordered the phone and set up personal pick up for the phones.  I went to the Apple store with the phones showed them my personal pick up confirmation and Verizon was blocking the phones from being sold.  I checked my account and I had already been charged by Apple.  Luckily the Apple store have a personal representative to contact for issues, it took 2 hours on the phone with her but eventually I was able to get the 2 Iphone 6s and go home.  I also had the Verizon representative tell me that it could be my employer discount causeing the error.  I went through the process of removing the employer discount and still cannot order the phones through the Apple store.  I bit the bullet and ordered from Verizon knowing that I will probably not receive my phone til next year even though my email says it will ship by 10/31.

  • Oracle designer 6i. Info about the current schema. Can't get tablespace inf

    Oracle designer 6i. I am running sql against the views to get info about the current schema.
    I can't get the tablespace names for the tables used in the latest version of a schema.
    eg the below sql return far too many rows.
    select distinct (lower(ti.GLOBAL_SYNONYM_NAME)||'*'||ts.name )
    from
    ci_application_systems app,
    ci_table_implementations ti,
    ci_tablespaces ts,
    ci_storage_definitions sd
    ,sdd_folder_members mem      
    ,ci_table_definitions td
    where
         app.OWNING_USER = '$OWNER' and
         app.NAME = '$APP_NAME''' and
    app.ivid = (select MAX(ivid) from ci_application_systems app2 where app2.name = '$APP_NAME'') and
    mem.PARENT_IVID = app.IVID and
    mem.MEMBER_OBJECT = td.ID
    and ti.GLOBAL_SYNONYM_NAME IS NOT NULL
         and ti.STORAGE_DEFINITION_REFERENCE = ts.STORAGE_DEFINITION_REFERENCE
    and ts.STORAGE_DEFINITION_REFERENCE = sd.ID

    Hi Neil,
    Thanks for your suggestion. I thought I tried all combinations of database, catalog and schema names and all different orders to connect, associate the connection and generate entities, but it seems I did not try this one. I did exactly what you suggest, except for the fact that I connected to the database before associating the connection to the project.
    It partially works now. I can generate Entities. Once I have generated an entity, all generated private member variables become red underlined, because table "null" for columns "xyz" could not be resolved. And the drop down box for columns in the JPA Details pane still doesn't get populated. The latter can be fixed by selecting the proper schema for the entity, which results in a @Table(schema="xyz") annotation. However, I expected this to be done automatically when the Entity was generated.
    The error about not being able to resolve the columns still exists. I tried to add a @Column(name="ASDF") annotation (because the columns names are all capital, while the member variables are lowercase), but that doesn't resolve the problem.
    I hope this gives you a clue to solve the problem!
    Bart

  • Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

    Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

    You can set up an Apple ID without a credit card.
    Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

  • HT5085 Gathering Info About your iTunes Library - Keep getting Network error

    I bought iTunes Match yesterday, and so far have not been able to use it.
    It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
    "We could not complete your iTunes request. The network connection was reset.
    Make sure your network connection is active and try again"
    Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
    Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
    I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
    I've copied the diagnostic results below:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Dell System XPS L502X
    iTunes 10.6.1.7
    QuickTime 7.7.2
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 003CA7C40B1E98E0
    Current user is not an administrator.
    The current local date and time is 2012-05-18 20:20:20.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 540M 
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: bb5c046694c1f4c590202360da9f2bc5
    iPodService 10.6.1.7 (x64) is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
    Description:          Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
    Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
    Description:          Intel(R) WiFi Link 1000 BGN
    IP Address:          192.168.1.69
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.254
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.254
    Lease Obtained:          Fri May 18 20:01:40 2012
    Lease Expires:          Sat May 19 20:01:40 2012
    DNS Servers:          192.168.1.254
    Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
    Description:          Realtek PCIe GBE Family Controller
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 00:00:00 1970
    Lease Expires:          Thu Jan 01 00:00:00 1970
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-05-18 20:14:07.

    @ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

  • HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

    You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

  • Need info about programming with InCopy

    Hi,
    I have a client who has stored thousands of InCopy documents with valid styles applied to segments of it.
    Now my requirement is to create a template which has XML tag -> Style mapping.
    Considering that template, I am suppose to open all the InCopy documents, apply that Tag -> Style mapping to it and then convert all of them to XML and persist the data in DB.
    Is there a programmatic way as to apply XML tags to a document based on the styles used?
    Please educate. I am a complete newbie to InCopy - so please bare with my questions,
    Thank you, Appreciate your help.
    Regards,
    Chintan

    You could download and deploy "struts-example.war" from apache website.
              [That Struts 1.0.2 I think.]
              ---Nam
              Jordy wrote:
              > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
              And God said
              Let there be numbers
              And there were numbers.
              Odd and even created he them,
              He said to them be fruitful and multiply,
              And he commanded them to keep the laws of induction.
              [Bill Taylor [email protected]]
              [nam_nguyen.vcf]
              

  • Need info about RH Server 6 and reports

    I'm interisted in RH Server 6 but I'm unable to locate much
    practical info about it on the Web site, and a call to sales didn't
    help. I need to know what I'm getting us into before I contribute
    our $2,000. Can anyone provide this information or point me to its
    location on the site:
    --I have system requirements from the Adobe site, but what is
    the "server" and what does installation and setup entail? About how
    how long does it take, or how difficult, to achieve operability?
    --According to a piece by John Daigle, the server component
    should be installed on a Windows server running IIS 5+. Is IIS a
    separate software or standart part of Windows server? If separate,
    what preparation should that server have before the installation in
    addition to installation of IIS?
    --I know nothing about security/firewall protocols. We will
    have our own and our customer firewalls to navigate. Are the server
    setup instructions adequate for setting all that up? Or are
    purchasers expected to have sys admins knowledgeable to set that
    up? Is that applied to the RH server or the Windows server? if RH
    server, how can I get a copy of instructions for my system people
    to review?
    --Have users found the RH server/RoboEngine reliable, once
    it's operable?
    --Is it true that the usage reports aren't customizable? Can
    additional usage data be specified in the RH server?
    --These report summaries are vague--Areas Requiing Help,
    Frequently Viewed Content--stating only that repoorts show the
    suchandsuch done "most frequently" or "most often." Does that mean
    the top 3, 5, 10 or what? Is there a way to track all of that
    activity from most to least?
    --The summaries of the reports Unanswered Questions and
    Frequently Asked Questions say that terms entered in the Search
    field are identified. Questions and terms aren't the same in my
    book--am I right that it captures anything entered? Can it do the
    same for the Index field?
    --I saw no RH server under downloads, or maybe missed it.
    Correct in guessing that a demo version is not available?
    --Is RH server user doc available on the web site? I found
    the Getting Started gude, which isn't much use in evaluating the
    product.
    I have additional questions, but if you can answer these
    questions or direct me to answers some of those may be covered.
    Thanks,
    Mike
    Access database.

    Hey, Mike!
    I found a few things for you. I'm in a hurry, so I'll list
    them quickly.
    For the Trial, go to the Adobe downloads page
    http://www.adobe.com/downloads/
    Then select RoboHelp Server 6 from the dropdown list. You
    will be asked to register (free) if you haven't already. When you
    arrive at the download page make sure you note the Trial Serial #
    To make it easier for you, its:
    1336-1033-2628-5062-0993-4570
    You can also find a RoboHelp Server 6 Getting Started Guide
    here
    http://www.adobe.com/support/robohelp/downloads/getting_started_rh6_server.pdf
    You were asking about IIS. Yes. As Colum says, this comes
    with virtually any version of Windows Server (or Windows XP
    Professional). However, you must install and configure it. I am not
    an IT or web administrator so it took me a while to learn, but
    amazingly I got it to work if you're patient and follow the steps.
    (I'm speaking of both IIS and Robohelp Server) Clearly IIS
    configuration is not a trivial thing and it is assumed that an
    author would have help and cooperation from the IT or Web Admin
    folks.
    As for customizing reports. At present, the existing reports
    are the only ones offered. Since these reports are generated from a
    database (Access, SQL Server or Oracle) I would think (haven't done
    it myself) that someone familiar with database adminstration could
    open the DB (after a backup that is) and be more creative with
    generating customized reports.
    You are right that the "Question" does in fact mean any
    search term or phrase that an end user puts in the search field.
    This is the string that is stored and reported as a question. In
    discussing this with the Adobe team at STC last month, they agreed
    that this was definitely a holdover from the legacy software and is
    due for a change sometime in the future.
    To answer your other question, text entered in the Index
    field is not stored in the database, only the search term field.
    Since taking on the old legacy product from eHelp and
    Macromedia, Adobe is focusing most of its attention on beefing up
    the client authoring app for the next version (Adobe RoboHelp 7).
    My assumption is that they are keen on improving the RoboHelp
    Server as well. I have passed along many feature requests along the
    lines you seem to suggest and hopefully the server will evolve
    along with the client app.
    Even with its limitations, my clients tell me RoboHelp Server
    provides very useful feedback to help them improve their knowledge
    base content to make it more helpful and responsive to users needs.
    They also like the searchability of PDF, Word, PPT and Excel as
    well...something which plain WebHelp without the RoboHelp Server
    does not do.
    I probably didn't get to everything, but hope this helps.
    John

  • Need Info about BW CRM Analytics

    Hi all,
    Guys,
    Please help me out...
    I need Info about BW with CRM Analytics
    What are the core areas where data's are extracted for CRM to BW
    What will be the Interview question related to BW CRM Analytics
    If possible if u have any docs kindly email me at [email protected]
    Thanks in Advance.
    Jaffer Ali.S

    Dear Jaffer Ali S.,
    The following types of analyses can be carried out:
    <b>CRM Lead Analysis</b>
    Use the InfoCube CRM Lead Management (Technical Name: 0MKTG_C01) for reporting.
    The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
    Channel Analysis
    Efficiency Reporting
    Historical Evaluation
    Lost Leads
    Channel Management: Top-n Lost Leads (Current Year)
    <b>CRM Activities Analysis</b>
    Use the InfoCube CRM Activities (Technical Name 0CSAL_C01) for reporting.
    The InfoCube for activities in CRM provides the data basis for evaluating business activities undertaken by your employees. It provides you with information about how much time is being spent on contacting the customer, whether customers actively seek out contact with your company and how intensively your employees look after your customers. It delivers data for queries such as:
    Intensity of customer care
    Activity History
    Success/failure analysis
    <b>Customer Interaction Center (CIC)</b>
    Activate the InfoCube Interactive Scripting Evaluation (IC WinClient) 0CRM_CIC1.
    Interactive Scripting Evaluation (IC WinClient)
    This InfoCube provides the data base for the interactive scripting evaluation. It supplies the data to the Interaction Center (IC): Interactive Scripting Evaluation query.
    <b>Opportunities Analysis</b>
    Activate InfoCube 0CRM_C04 - Opportunities.
    The CRM Opportunities InfoCube contains all the characteristics and data used for the opportunities analyses.
    <b>Sales Order Complaints Analysis</b>
    Activate InfoCube Complaints (Technical name: 0CSAL_C09).
    You can carry out the complaint analysis on a daily, monthly, weekly or a quarterly basis. The analysis can be done in relation to CRM Service Organization, CRM Sales Organization, CRM Product, and Sold-To Party.
    <b>Service Qualtiy Analysis</b>
    Activate the MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints.
    The MultiProvider 0CSRVMC04 - CRM Service - Orders and Confirmations with Complaints gets the data from the following ODS objects for analyses in various queries:
    0CRM_PROI - Orders: Item Data
    0CRM_COI - Controlling (Item Data)
    0CRM_CNFI - Confirmations (Item Data)
    0CRM_COMP - CRM Complaints (Items)
    Let me know if you need further help.
    Reward points if it helps.
    Regards,
    Naveen.

  • Info about tracks seems to stick even though I change it

    I put an audio book onto my iPod shuffle 4th (or maybe 5th) gen. To start with the order was messed up. Both listing-wise in iTunes and playback on ipod. I then worked out how to order this particular audio book correctly (by using disk numbering, 1 of 3, 2 of 3, 3 of 3), and this got the order correct as listed in iTunes. But the incorrect ordering stuck so far as playback on the iPod went. So, just to clarify: Correct order listed in iTunes, wrong order played back on iPod.
    I tried deleting all the audiobook files from the iPod and recopying them back on. Various other changes to try and get the right ordering to stick -- for playback. But no. The ordering remained messed up on playback, but looked fine in iTunes order.
    What I had to do to fix this was reset the iPod back to its factory settings, then copy the correctly listed audiobook onto the iPod. Then the playback order was correct.
    My question (becuase I've now got a similar but different problem): How to achieve what I achieved by resetting back to factory settings and copying files on again, without doing a factory reset? How to get info to stick, take effect, on the iPod? It seems the iPod, once it gets a version of a bunch of files, won't allow you to change that info about those files. Please help. I'm  really struggling with this iPod. I can programme C and PHP etc. but I can't get my iPod to work properly. Really not happy.

    where can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFW

Maybe you are looking for

  • My Infinity experience so far......

    Hi all Well I thought I would post a message with my experience so far after returning to BT for internet service. I should first mention I have an extremely low opinion of BT because ever since I first started dealing with them back in 2001 I have h

  • WLan fails to connect after sleep mode - Satellite T110-10x

    Hi, Everything works fine, wireless connected. After sleep mode - it fails to connect although it detects my wireless network. I've tried the latest Realtek driver, still no good. I've verified that my setup is not to turn down wireless in the power

  • Sorting Rule in Batch Management

    Hi, I want to issue 23no of pieces from my stock which is in batch managment.It is picking 20qty correctly but its not picking from a batch where qty 3 is available.How can I solve it. I used LOBM_ZUSTD (qty status) as characteristics for sorting rul

  • How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN

    i am facing problem in Report RMclobjvn , TCODE is CL6BN i have to add some additional fields on the result screen. but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 see

  • Duplicate Messages in Sent Folder--Apple mail and gmail

    I recently started using apple mail for my two gmail accounts. I have properly configured all folders (highlight "trash" from gmail and click use this mailbox for..) since i have two gmail accounts, i did this for both of them. i did a couple of test