Lack of applications in french in AppWorld

Hi there,
I think there's a lack of applications for french-speaker users. Compared to Android or Apple, there's few or no applications in french, espacially about books and french dictionaries like Larousse or Le Petit Robert. Is it possible for you, in RIM, to resolve this problem in a long term?
Thanks!

Think I had read a thread on SAME Subject more than a year back... but you need to contact Nokia Store support for this suggestion..as this being an User-to-User Forum, you will not get an official responce to this..
BTW.. just a work-around (...surely will need some effort)..If you want to know how many pages are there under a particular category.. Select the catagory.. Go to the 2nd page by clicking NEXT.. Then in the address bar change the last digit 2 to say 15..and it will directly take you to Pg.15.. (Refer Attachment 1). Change it to 25 and it will directly take you to Pg.25 (Refer Attachment 2). If there are less no. of pages in that catagory.. you will see 'There are No Items available....' .. and so on..
Attachments:
Nokia Store.png ‏626 KB
Nokia Store1.png ‏512 KB

Similar Messages

  • IPhoto will not open due to lack of application memory

    I am trying to open iPhoto to move some photos to an external drive. iPhoto is not opening as it appears I am running out of Application Memory. I have run the disk utilities and everything is fine. I have closed all other applications so that is the only app running yet it still will not open. What can I do to get some of those photos off so I will not have this problem?

    Etrecheck is a save and very useful diagnostic tool developed by one of the top contributors here in the ASC.  It provides us with vital information for diagnosing your Mac and issue.

  • My iPad set it's applications in French

    I just bought an iPad air, and there is a problem with the set up. All the interfaces are in English, but when I open up iTunes or the App Store or Newsstand, it's all in French. I don't really speak much french, so it's a little difficult. Anyone know how to change this?

    Hello Jewronski,
    The following article should be able to help get your apps back to the appropriate language.
    iOS: How to change the language when it's set to one you don't understand
    http://support.apple.com/kb/HT2371
    Cheers,
    Allen

  • I am disappointed for the lack in application even for a Q10

    I am very disappointed because I bought a balckberry smartphone q10 to use an application for a car sharing service activated in Milan one year ago. The service called enijoy (site www.enijoy.com) is very popular in Milan and you need a smatphone to download the application for reserve and open the car. Unfortunately the applications are available for Android, Apple, Windows but not for Blackberry. I invested 450 euros for a Q10 but the problem is always the same, difficulties to get the same services of android or apple smartphones

    Yes, but this app does not work. As well as another car sharing app named Twist

  • Application removed

    Hi everybody.
    I have a problem with an app from the french apple store where i'm used to get my apps. I would like to know why does the application "Oxford Deluxe" (a english-english dictionnary -very useful-) was removed ?? I paid for it one month ago, and it was removed completely from my device when I had to restore it, despite that I got back all the other apps browsing on the already paid apps list ... It didn't lack any application except this one, around 50 euros .. (+/- 65 $)
    Moreover, when I look for it in the US application store, I find it. Why do they have removed it ?
    So after having searched for a similar problem, I ask the community to help me to fix this.. Or at least to get paid back... Even if I suppose its part of their consumer policy to not.
    If it was removed for the moment I bought it, if apple removed it for instance, does it mean that I just lost 50 euros ???? This wouldn't be very decent from apple, knowing that I don't act like some of iphone users who jailbreak everything..
    Thanks.

    The LabVIEW program communicates via TCP/IP with an external GUI program. So I can see if the program is active or not. After uploading the LabVIEW program as startup application, it stays as startup with every reboot until someone connects with his project. I saw this behavior with my colleagues project on his laptop. I have to check this again when he returns tomorrow.

  • How can I display special characters of NonEuropean languages (French, Italian, Spanish, German and Portuguese.) using import string mechanism

    I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
    When I put special characters in the import string file they showed up as ? (question mark)
    The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
    In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
    A) Is there a font which is directly German/ French etc and not regula font + script parameter?
    B) Are there another required step
    s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)

    This was discussed last week in this group- read the previous messages.
    Look for the thread "Foreign Languages in Labview"
    And recite the mantra
    ActiveX is good
    ActiveX is holy
    All Hail Bill
    Those who claim otherwise are heretics and not to be trusted
    Actually, in this case the non-ActiveX suggestions may be good.
    talia wrote in message
    news:[email protected]..
    > How can I display special characters of NonEuropean languages (French,
    > Italian, Spanish, German and Portuguese.) using import string
    > mechanism

  • Deploying an Application to a APEX 3.1.1 Runtime Environment

    Hello Everyone,
    I'm trying to work out how to deploy an application from a development to runtime environment but am facing a few issues / uncertainty and would appreciate any input/help on this. To begin with here is my environment:
    - Apex 3.1.1
    - Two Oracle 9i (9.2.0.8) instances running on different hosts (development environment on host AA and runtime environment on host BB)
    - Using the Oracle 9i HTTP Server with mod_plsql (on both hosts)
    - DEVLWS workspace +(on development env)+
    - DEVSCHEMA schema +(on development env)+
    - USER01 - non-developer & non-admin user +(on development env)+
    - DEV01 - developer and admin user +(on development env)+
    I'm performing this test deployment with the downloaded application Timesheets from apex.oracle.com with the application ID of 111 (when imported into my development environment).
    Situation:_
    I have no issues on the development environment. I can import the Timesheet app into it and run it using either the USER01 or DEV01 ID as it was imported into the DEVSCHEMA schema. However, when I try to deploy over to my runtime environment, here is where things gets sketchy on this.
    1) In order to get this application (Timesheets) to run properly on my runtime environment, I've to perform a Oracle9i EXP of my DEVSCHEMA objects and import this into my runtime environment using the IMP utility to get the proper workspace and associated objects over,
    --> I tried exporting the workspace on the development env but even after running it on the runtime env, I was not able to get the application to run (missing workspace schema, users etc).
    2) From my development environment, I export the Timesheet app with supporting objects option and on the runtime environment, I use SQL*Plus as such:
    SQL> alter session set current_schema=FLOWS_030100;
    SQL> @f111.sql
    Once the script completes, I use the http://hostBB:7776/pls/apex/f?p=111.1 url and was able to get in to the application, however I found things like the images are missing and I've to manually export these again from the development env and run the generated SQL script file on my runtime env.
    Is there a better (and documented step by step) way of doing this kind of deployment? The Apex User Guides talks about creating a packaged application but I didn't see this as a way to deploy specifically into a runtime environment as I followed it and still had missing images. When I did the export of the Timesheet application, I used the DEV01 id and made sure I selected the 'with supporting objects' option but yet I've to do most of the steps manually (i.e. build the schema, tablespace, application tables via exp/imp) and again the images were not included.
    Is there a document / note available that discusses this in better detail (deploy from Development env to Runtime env) so that I can do cut down the manual steps and making sure that my developers can effectively deploy our apps with minimal fuss and headaches? Appreciate any input.

    ...I've to perform a Oracle9i EXP of my DEVSCHEMA objects and import this into my runtime environment using the IMP utility to get the proper workspace and associated objects over,...
    EXP/IMP will not do workspaces. You can use the Application Express apex_admin application to export a workspace to a file. Then, in a runtime environment, you can install that workspace file using SQL*Plus. This way of
    creating the workspace also ensures that it will have the same workspace ID as it did in the original database, making possible the installation of exported applications from application export files from the original
    workspace into the new workspace having the same workspace ID and also where the installed applications are to have their original application IDs.
    ... and still had missing images. When I did the export of the Timesheet application, I used the DEV01 id and made sure I selected the 'with supporting objects' option but yet I've to do most of the steps manually (i.e. build the schema, tablespace, application tables via exp/imp) and again the images were not included.
    Images aren't part of application exports. Exporting the images to a file and then installing them using that file and SQL*Plus is the way to do it.
    As Patrick mentioned, running the application export file in SQL*Plus doesn't run the supporting objects script. It creates the script in the datbase. But in a runtime environment you can't run the script because the runtime environment lacks the Application Builder.
    SQL> alter session set current_schema=FLOWS_030100;
    SQL> @f111.sql
    You can install applications by connecting as a less privileged schema. Any schema assigned to the workspace into which the application is to be installed will do. To install workspace export files (or applications), you can also use a schema that has been granted the role APEX_ADMINISTRATOR_ROLE.
    Scott

  • "French Script" Font .  How do I get it on my new MacBook?

    I have just bought a new MacBook and had my data transferred from my old MAC where I had many folders in the French Script font. (These were older folders on OS9). These were transferred in another font. Before I purchase this font I want to make sure it doesn't exist somewhere on my new computer. Also any recommendations as to where to buy if necessary.
    Thanks.

    Hi Barb,
    Welcome to Apple Discussions and the AppleWorks forum.
    This forum is for discussion of tips, techniques and issues with the Apple productivity application AppleWorks, not for general discussions of how Apple's computers work.
    You'll likely be able to get a more definitive answer to your question in one of the other forums on the Apple Discussions site. My suggestions would be either the MacBook or the Mac OS X 10.4 (Tiger) forum.
    I looked for French Script on my iBook G4 and iMac G3, but didn't find any trace of that font. The font on your older machine may have been installed as part of the package coming with a particular application.
    French Script™ is a Monotype Imaging font. Their fonts.com site lists it for CAD $30 or $36, depending on version.
    Regards,
    Barry

  • Cannot display certain french glyphs running in Chinese NT 4.0

    I have got a java application which supports english, french, german, spanish, italian languages. I have translations properties files which is loaded for the language the application is installed in(ResourceBundle, et al). I have a new requirement to allow the application to run the chinese, korean and other DBCS languages.
    The problem I face is when installing and running my application in french(or spanish).Some of the french glyphs are not getting correctly displayed in the menubar and pop up menu, while the same glyphs are displayed correctly in labels and buttons. By not getting correctly diaplyed, I mean that the particular glyph is not dispalyed at all(no garbage, rectangular boxes, etc). There are empty spaces within words. I have not done any changes to the font properties files, nor am I loading and setting fonts anywhere in the application. Also I am not setting the locale using Locale.setDefault. That means I am in the default os locale. Am I required to do some other settings to fix this problem? Below is the environment I am working in
    Os - Win NT
    Language - Traditional Chinese
    Application lang - French
    JRE 1.4.1_01
    Any help on this will be appreciated.

    Thanks for your reply.
    For point 1, I am working on a chinese NT, so the chinese fonts file MINGLIU.TTC is already installed.Also installed are the arial, courier, times,symbol and windings fonts as per the font.properties.zh file.
    For point 2, There is already a file(font.properties.zh) file in the jre\lib directory. Could you elaborate what changes should I make to the file?
    I have the internationalised version of jre 1.4.1_01 installed. The intriguing part is the french fonts are getting correctly displayed throughout the application correctly except for the menu items. There is no problem with displaying, entering chinese characters though.
    I did a small experiment and used the non internationalized JRE and surprisingly found all french characters to get correctly displayed throughout the appliacation!! The problem here came with displaying certain chinese characters. But the font properties files in both the jres(internatinalized and non internationalized) were similar.

  • Flex datagrid french sorting

    Hi,
    I am using flex datagrid to develop an application in french,
    as french is having special character in it,
    i need to sort datagrid column in french. Flex datagrid
    unable to sort data in french. i need french sorting,
    if somebody has solution of this please help me to get out of
    this.
    If possible please reply me on
    [email protected]

    i am using inbuilt flex sorting, i am not using sortcompare()
    function.
    its just a string sorting but as its in french ,character
    "
    É" is comig after character "
    V" , because flex treated it as a special character
    . it should come before "
    V". so do we need to change character set for
    flex?

  • No application memory left.  Getting worse and worse.  My Mac Pro is basically unusable.  I am about to go back to a PC.

    I am ready to go back to a PC.  I cannot use my computer.  I have lost photos.  Can't even download from carbonite to replace lost itemsk  because of lack of application memory.  It is driving me crazy.  This computer cost too much for this kind of thing to be happening.  Mine has been happening for over a year.  I can't get answers.

    if your Mac is running that bad, there is something on your system causing this.
    It would help us to help you if we could have some more technical info about your iMac. If you wish, Please download, install and run Etrecheck. Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft.
    Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
    This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
    It is not malware and can be safely downloaded and installed onto your Mac.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
    Thank You.

  • ResourceBundle - French characters

    I have a Swing application that I want to internationalize. I.E. I want to have an English resource bundle, and a French resource bundle.
    I created the two resources files and I've placed them in the classpath, I then load the files like this ( for the French version ):
    ResourceBundle.getBundle( "DisplayStrings", Locale.FRENCH, this.getClass().getClassLoader() );
    And the resource load properly, but when I request a french string that containts French characters, the String doesn't bring over the french accent characters properly.
    Is this an encoding problem? When viewed in a Text editor the French accents work fine, but when I run the application the French characters are coming across as funny garbage characters.
    Does anyone have a suggestion?
    Message was edited by:
    bryano

    I've executed that native2ascii program on my properties file:
    E.G. - It converted this line:
    Des raccordements aux syst�mes principaux n'ont pas pu �tre �tablis.
    to
    Des raccordements aux syst\u00c3\u00a8mes principaux n'ont pas pu \u00c3\u00aatre \u00c3\u00a9tablis.
    But when I execute the program, the characters are still not coming through properly. I end up with this string:
    Des raccordements aux syst��mes principaux n'ont pas pu ��tre ��tablis.

  • Applications won't work

    Hello I have 3 problems. My virtual keyboard is displayed more. I d'ont found the most Tweeter application, yet it exists in the list. And I can't open new applications I downoload in Appworld because my terminal displays ERROR. Please help me

    Can you explain more? And what is the error?
    Thanks.
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Applications won't open, finder restarts

    Almost immediately upon upgrading to mavericks, I can't open applications, and upon trying to do so, the finder crashes and restarts.
    Here is what I know: After upgrading and signing in, I selected the popup that said something like "show new mavericks features" which launched Safari successfuly. Great so far. Then I tried to open preferences, and it failed to open and the finder crashed. I tried a half dozen other apps Apple and not, and they all crash before showing any UI and take the finder with them. This list would include Terminal and Console, of course.
    Things I've tried:
    Safe Mode: Doesn't help.
    Deleting all Startup items for user: Doesn't help.
    Loging into Guest Account: Does help! But I'm not exactly sure what this means, except that something is special with my account.
    Can anyone suggest a next course of action? Without Terminal and Activity Monitor I feel blind to what might be running. Mavericks has essentially made my login user inoperable, and I'll downgrade before I hose that account. I'd of course rather fix the problem but I'm out of ideas

    So, part of my problem was that I could not access any crash logs because
    A) Console would not open (like everything else0
    B) Unable to view crash logs from my user due to a lack of application opening, and Guest did not have plrivledges nor could I give it the privledges.
    So I created a new account and gave it admin privledges, and after some copy and permission manipulation I was able to get the crash logs.
    I have 4 crash logs for 3 different actions.
    Open Calculator from dock
    Crashes Finder
    Crashes Dock
    Open Calculator using spotlightCrashes SystemUIFinder
    Open Calculator from the application folderCrashes Finder
    The only commonality I can find is this:
    Application Specific Information:
    *** __CFTypeCollectionRetain() called with NULL; likely a collection has been corrupted ***
    In each case, a thread dealing with CoreFoundation is crashing, and all of them have similar call stacks in the last 10 calls or so. This one is from the Finder crashing.
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation                0x00007fff94a25e8d __CFTypeCollectionRetain + 317
    1   com.apple.CoreFoundation                0x00007fff94a256b8 __CFBasicHashAddValue + 424
    2   com.apple.CoreFoundation                0x00007fff94a24609 CFDictionarySetValue + 217
    3   com.apple.LaunchServices                0x00007fff8cc9c7bc _LSLaunch(LSContext*, FSNode*, unsigned int, void*, __CFArray const*, AEDesc const*, __CFArray const*, __CFDictionary const*, unsigned int, ProcessSerialNumber*) + 9017
    4   com.apple.LaunchServices                0x00007fff8cc99369 _LSOpenItemsWithHandler_CFDictionaryApplier(void const*, void const*, void*) + 2909
    5   com.apple.CoreFoundation                0x00007fff94a5ed36 __CFDictionaryApplyFunction_block_invoke + 22
    6   com.apple.CoreFoundation                0x00007fff94a5ecfc CFBasicHashApply + 124
    7   com.apple.CoreFoundation                0x00007fff94a5ec4d CFDictionaryApplyFunction + 173
    8   com.apple.LaunchServices                0x00007fff8cc97c3e _LSOpenStuff + 1372
    9   com.apple.LaunchServices                0x00007fff8cce7628 _LSOpenURLsWithRole_Common(__CFArray const*, unsigned int, AEKeyDesc const*, LSApplicationParameters_V1 const*, ProcessSerialNumber*, long, FSRef*) + 561
    10  com.apple.LaunchServices                0x00007fff8cce73ea LSOpenURLsWithRole + 32
    11  com.apple.QuickLookUIFramework          0x00007fff95774e00 __54-[QLSeamlessOpener _openItems:async:local:realAppPID:]_block_invoke + 1405
    12  com.apple.QuickLookUIFramework          0x00007fff95774343 -[QLSeamlessOpener _openItems:async:local:realAppPID:] + 1511
    13  com.apple.finder                        0x000000010a454ff7 0x10a395000 + 786423
    14  com.apple.finder                        0x000000010a63c46d 0x10a395000 + 2782317
    15  com.apple.finder                        0x000000010a453a1d 0x10a395000 + 780829
    16  com.apple.finder                        0x000000010a453020 0x10a395000 + 778272
    17  com.apple.finder                        0x000000010a489096 0x10a395000 + 999574
    18  com.apple.finder                        0x000000010a451c88 0x10a395000 + 773256
    19  com.apple.finder                        0x000000010a4b4f94 0x10a395000 + 1179540
    20  com.apple.AppKit                        0x00007fff97ef63d0 -[NSApplication sendAction:to:from:] + 327
    21  com.apple.AppKit                        0x00007fff97ef624e -[NSControl sendAction:to:] + 86
    22  com.apple.AppKit                        0x00007fff97ef6187 -[NSTableView _sendAction:to:row:column:] + 94
    23  com.apple.AppKit                        0x00007fff97ef3872 -[NSTableView mouseDown:] + 6394
    24  com.apple.AppKit                        0x00007fff97ff6fd1 -[NSOutlineView mouseDown:] + 74
    25  com.apple.finder                        0x000000010a4b479d 0x10a395000 + 1177501
    26  com.apple.AppKit                        0x00007fff97edcd08 -[NSWindow sendEvent:] + 11296
    27  com.apple.AppKit                        0x00007fff97e7b744 -[NSApplication sendEvent:] + 2021
    28  com.apple.finder                        0x000000010a3b99d5 0x10a395000 + 149973
    29  com.apple.AppKit                        0x00007fff97ccba29 -[NSApplication run] + 646
    30  com.apple.AppKit                        0x00007fff97cb6803 NSApplicationMain + 940
    31  com.apple.finder                        0x000000010a39b5cc 0x10a395000 + 26060
    32  libdyld.dylib                           0x00007fff91fb85fd start + 1

  • Blackberry Identity Update for AppWorld

    I  cannot get into my App World.  Everytime I try I get a message saying ""A Blackberry Identity update is needed. Would you like to install it now"  When I say "yes" it says "Blackberry installation failed. Please try again later".  This is driving me crazy.  I cannot download anything. Please help.

    I would suggest this:
    Then, go to Options > Advanced > Applications and scroll the AppWorld application and don't click on it, just scroll to it. Click Menu > Delete and remove the application.
    Now, do a reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    Finally, use your BlackBerry browser to go to www.blackberry.com/appworld and download/install the Aw application again. This will also update your BlackBerryID.
    After installation and possibly another reboot, all should be fine.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • How to send data using serial Communication

    I want to make serial communication using RXTXcomm.jar file.I was written the code.From this I got the list of serial ports avilable on pc but then after when I was tring to send command to machine which is attached to port it didn't gave any reply.

  • Hi need help in writing this query

    A table has three columns - id (primary key), categoryID (numeric) and amount (numeric). The goal is to provide a query that would show categoryID and sum of amounts within that category where categoryID is an odd number and sum of amounts is greater

  • Function based indexes available in Standard Edition ?

    Is the function based index available in the standard or only the enterprise edition ? Thanks Oliver

  • Installation of Applications on BB Curve 8900

    I am facing so much problem in installing themes on my black berry curve curve 8900. I downloaded the v4.6 Desktop Application software and installed it on my computer as my BB is having v4.6 OS Software. Then I downloaded themes from the web with bo

  • Which legacy systems are used for what purpose?

    Hi gurus, I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? <b>can any body send me a link that can help me understand when and where, which systems are used for what purpose..<