Lack of color calibration box in toolbox

I have a photosmart d7360. It has been printing excessive greens in the grey area and the print quality pattern printout shows Lt Magenta as a magenta color and Magenta as a pale violet. The suggested solution from HP is as follows
Click Start , point to Programs or All Programs , then HP , and click HP Solution Center . The HP Solution Center screen opens.
Select the appropriate printer by clicking the corresponding tab at the top of the screen.
Click Settings , point to Print Settings , and click Printer Toolbox . The Printer Toolbox opens.
In the Printer Toolbox screen, click Calibrate Color .
However there is no "calibrate color" box in the printer toolbox. I have downloaded the latest drivers and I run windows XP home.
Any suggestions?
JohnS

Have an eye on this eBook for a crash course on color management:
http://spyder.datacolor.com/scripts/ebook-en/Spyder_eBook_EN_final.pdf
I use a Spyder4Pro myself and can recommend. It's very easy to calibrate multiple screens with this tool.

Similar Messages

How can I change the color of a box in book layout?

I am try to change the color of a photo box when making a book.
Will the box print? and if so how can I change the color
Thank you
Mark

The box will print... but there is no way to just assign a color to a box. The closest you can get is ot create a small solid colored image in Photoshop and assign that to the box. You may get a resolution warning but as long as it's a solid color it does not matter how few pixels you have.

InDesign won't print colors in text boxes

I have been working on a newsletter that includes some charts and tables in it. I put the tables and charts in a text box, and then added a background fill color to it. I exported the document to PDF, and the colors showed up there fine.
The trouble occurs when I try to print the document. The fill color in the box does not show up at all. What can I do to fix that. Thanks for the help.

This sounds more like an issue with the printer driver and the PDF than an InDesign issue, but one way to test would be to try to print direct from ID. Do the colors print correctly then?
What do you see in Acrobat when you turn on Overprint Preview? Is the color still there?
Can you post this PDF on a server someplace so we can download and test it?
Peter

Change color for validation box

Hi,
I am using JDev 11.1.1.6.0.
If i have required="true" validation on an input text, Red color box surrounds and shows the validation.
Is there any way to change the color of that box?
Thanks
Nitish

If there is any you have to use skinning. For this you have to find out which selector is used for the box. You can disable the style compression in your web.xml and run the app, then when you see the box use firebug or any other tool which allows to inspect the page elements. If you select the box you should see the style class names. They normally are the same as the corresponding skin selectors (there is a syntax difference, but you get it when you see it )
Timo

Setting background color in a Box

Below is the code for a simple dialog displayed from an applet. The dialog contains a text area and a button inside a box. I would like for these 3 items to have the same color. However I'm not able to set the color of the box. I hope you can suggest a solution.
Thanks for your help.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ComboBoxApplet extends JApplet {
public void init() {
 new MessageDialog("Hello there....");
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.*;
public class MessageDialog extends JDialog {
JButton okButton = new JButton("OK");
public MessageDialog(final String text) {
 JTextArea label = new JTextArea(text);
 label.setEditable(false);
 label.setForeground(Color.black);
 label.setBackground(SystemColor.control); // successful
 Container pane = getContentPane();
 pane.setLayout(new BorderLayout());
 pane.add(label,BorderLayout.CENTER);
 setSize(150,120);
 Box okBox = Box.createHorizontalBox();
 okBox.setJForeground(SystemColor.control); // unsuccessful attempt
 okBox.setBackground(SystemColor.control); // unsuccessful attempt
 okBox.add(Box.createGlue());
 okBox.add(okButton);
 okBox.add(Box.createGlue());
 pane.add(okBox,BorderLayout.SOUTH);
 okButton.setBackground(SystemColor.control); // successful
 okButton.addActionListener(
 new ActionListener() {
 public void actionPerformed(ActionEvent event) {
 setVisible(false);
 getRootPane().setDefaultButton(okButton);
 setVisible(true);
<HTML>
<TITLE>ComboBox Applet Test</TITLE>
<BODY>
<APPLET CODE=ComboBoxApplet.class WIDTH=400 HEIGHT=200>
</APPLET>
</BODY>
</HTML>

I have a really easy solution to this, I just tried it out and it worked perfectly. You cannot set the background to the box, but you can set it to the frame(this), and panels. so why dont you do the following:
1)just create a panel
2)add the "Box" that you have to the panel
3) set the background of the panel
it works good for me

How can I change background color in parameter box

Hi all,
I would like to change back ground color of parameters box from blue to other color.
where i have change?
see attached screenshot.
please help me
Thanks in advance for your support

Hello,
I don't think this is documented in BIP's manuals.
All you will find regarding "changing the colour" is related to conditional formatting
see section 3.8.3.5 About Conditional Formats from Fusion Middleware Report Designer's Guide for Oracle Business Intelligence Publisher
http://docs.oracle.com/cd/E28280_01/bi.1111/e22254/create_lay_tmpl.htm#cond_format
If you open a service request to support we can open an enhancement request with Development.
If this will be approved, you can have this option implemented in future versions.
Bogdan

Background color of check box

Hi All,
I have one doubt.Suppose I have a lot of records.With in the same block I have Check boxes adjecent to records.
I write a Pre-Block trigger:
Set_Block_Property(:system.CURRENT_BLOCK,current_record_attribute,'GP_V_YELLOW');
Post-Block Trigger::
Set_Block_Property(:system.CURRENT_BLOCK,current_record_attribute,'GP_V_WHITE');
My question is I never want to change the background color of check box.How to do it.
Any Ideas,
Thanks,
Bhujendra

Hi,
I have several blocks.That's why i'm using pre-block in form level trigger. Each record in a block is required to show visual attribute GP_V_YELLOW,GP_V_WHITE

Can i give color ot check box in forms 6i

HI
is it possible to change the color of check box in forms 6i..??
i want to change the color of inner part of square of check box.. is it possible??
pls reply me asap .

Hi,
It is not possible to change the colour of the check box where the check appears. You will be able to only change the colour of the other areas.
Hope this helps.

How to color the check boxes?

Hello
I have couple of check boxes on my form, like....... my_check_box_monthly....... my_check_box_yearly.
I have 2 scenarios, so based on scenario, i hv to select either of the check box, as below
if scenario_1
make/display my_check_box_monthly with BLUE
else if scenario_2
make/display my_check_box_yearly. with RED
endif.
For text fields..... I know how to get i, its as below,
this.ui.oneOfChild.border.fill.color.value = "224,224,224";
Pls. let me know How to write the code for COLORING the check boxes in Java Script?
Thank you

Kindly check this code for changing border color of check box
If scenario1
this.ui.checkButton.border.edge.color.value = "0,0,255";
else if scenario2
this.ui.checkButton.border.edge.color.value = "255,0,0";
Thanks,
Anitha

What do the colored wires and boxes mean

I remember years back finding a National Instruments webpage that showed all the Labview colored "wires" and "boxes" and what they meant. Does anyone know where that is now and/or if it still exsists?? For example a "magenta" box was a string...green was a boolean..
Thanks.
Solved!
Go to Solution.

It was the LabVIEW Quick Reference Card. At one point they stopped putting the datatypes on the card. Not sure which version stopped it. You can get the cards online: http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/q/labview%20quick%20reference...

Color box in toolbox looks strange + can only color in 1 color

I am having 2 issues and assume they are related.
1) Everytime I draw with the pencil tool, it fills in with pink and a black stroke (yes, the fill stroke box is unchecked). This happens no matter what colors are chose as fill/stroke.Afterwards I can change the colors but I would like to be able to draw plain strokes without it filling in pink every time...
2) As you can see in attached image, the color box looks different than usual.
Any help would be greatly appreciated!

You have fill and a stroke applied to the layer so now every time you draw on that layer.
In the appearance panel double click the layer item and then you will see the stroke and pink fill make the fill none and the stroke none as well or delete the stroke and the fill and apply the stroke to the path.

How can I change the background color in text box using RGB format

Can some one tell me if Mac Pages (version 5.0) allows users to customize the background color of a text box using RGB color format? It appears that the text color can be changed using RGB but background color is limited to a few standard colors. Thanks

They are just sample swatches, use the Color Picker to choose anything you want.
Peter

How to change the color in text box item.

Hi,
There is a text box where i am returing the value using item source SQL and Always replacing.
I have a condition like this if value is > 10 value must appear in red else white.
Eg:
select
case
when TO_NUMBER(:P122_PRJ_SV_PROJECT_USL) > TO_NUMBER(:P122_GSD_SV_PROJECT_USL) then
''|| PO.EV_UCL || ''
else
''|| PO.EV_UCL || ''
end
from projects po
this is not working please suggest me how to change.
Thanks
Sudhir.

Sudhir
Please repost your source code with {noformat}{noformat} (with the curly brackets and in lower case) above and below it.
Cheers
Ben

How to change color of list box highlighting in Acrobat 9 Pro?

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

When you create a list box in Acrobat 9 Pro you select the default value. That default value displays on the form in a highlighted color. Does anyone know how to change the color of the highlight or ideally make it no color? Thanks.

How do i change the color of text boxes and the texts that i enter in them?

I recently changed my system's color settings and now the text boxes in Firefox are dark grey. This is fine when the text happens to show up as white, but when it shows up as black, I can't read what I'm typing. (I'm not clear on what makes the difference. The box I'm typing this in now happens to be dark grey with white text.) I've tried playing around with settings within Firefox preferences and in my OS' (Kubuntu) system settings, and haven't yet been able to identify what settings exactly might change this specific aspect.

Two possible ways are available
Set the text with and html text string like "<html>" + text + "</html>"
or get the cellrenderer, cast to the DefaultCellRenderer and call setForeground or background or implement or your own cellrenderer to do the custom coloring (this could maybe depend on indexes)
ICE

Lack of color calibratio​n box in toolbox

Similar Messages

Maybe you are looking for

Lack of color calibration box in toolbox